Localized Perivascular Therapeutic Approaches to Inhibit Venous Neointimal Hyperplasia in Arteriovenous Fistula Access for Hemodialysis Use

An arteriovenous fistula (AVF) is the preferred vascular access for chronic hemodialysis, but high failure rates restrict its use. Optimizing patients' perioperative status and the surgical technique, among other methods for preventing primary AVF failure, continue to fall short in lowering failure rates in clinical practice. One of the predominant causes of AVF failure is neointimal hyperplasia (NIH), a process that results from the synergistic effects of inflammation, hypoxia, and hemodynamic shear stress on vascular tissue. Although several systemic therapies have aimed at suppressing NIH, none has shown a clear benefit towards this goal. Localized therapeutic approaches may improve rates of AVF maturation by providing direct structural and functional support to the maturating fistula, as well as by delivering higher doses of pharmacologic agents while avoiding the adverse effects associated with systemic administration of therapeutic agents. Novel materials-such as polymeric scaffolds and nanoparticles-have enabled the development of different perivascular therapies, such as supportive mechanical devices, targeted drug delivery, and cell-based therapeutics. In this review, we summarize various perivascular therapeutic approaches, available data on their effectiveness, and the outlook for localized therapies targeting NIH in the setting of AVF for hemodialysis use. Highlights: Most systemic therapies do not improve AVF patency outcomes; therefore, localized therapeutic approaches may be beneficial. Locally delivered drugs and medical devices may improve AVF patency outcomes by providing biological and mechanical support. Cell-based therapies have shown promise in suppressing NIH by delivering a more extensive array of bioactive substances in response to the biochemical changes in the AVF microenvironment.

Nano-embedded medical devices and delivery systems in interventional radiology

Nanomaterials research has significantly accelerated the development of the field of vascular and interventional radiology. The incorporation of nanoparticles with unique and functional properties into medical devices and delivery systems has paved the way for the creation of novel diagnostic and therapeutic procedures for various clinical disorders. In this review, we discuss the advancements in the field of interventional radiology and the role of nanotechnology in maximizing the benefits and mitigating the disadvantages of interventional radiology theranostic procedures. Several nanomaterials have been studied to improve the efficacy of interventional radiology interventions, reduce the complications associated with medical devices, improve the accuracy and efficiency of drug delivery systems, and develop innovative imaging modalities. Here, we summarize the recent progress in the development of medical devices and delivery systems that link nanotechnology in vascular and interventional radiology. This article is categorized under: Diagnostic Tools > Diagnostic Nanodevices Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease.

Bismuth-infused perivascular wrap facilitates delivery of mesenchymal stem cells and attenuation of neointimal hyperplasia in rat arteriovenous fistulas

BACKGROUND

Mesenchymal stem cells (MSCs) have emerged as novel therapies for supporting arteriovenous fistula (AVF) maturation, and bioresorbable polymeric scaffolds have enabled sustained MSC delivery into maturing AVFs. However, the radiolucency of biopolymeric wraps prevents in vivo monitoring of their integrity and location, hindering long-term preclinical investigations.

METHODS

We infused bismuth nanoparticles (BiNPs) into polycaprolactone (PCL) to fabricate an electrospun perivascular wrap capable of MSC delivery and conducive to longitudinal monitoring using conventional imaging. We tested the wraps' effects on the attenuation of markers of neointimal hyperplasia (i.e., endothelial dysfunction, hypoxia, and inflammation), the leading cause of AVF failure, in rats with induced chronic kidney disease (n = 3 per time point) for the following groups: control (no wrap), PCL wrap, PCL with MSCs, PCL-Bi (BiNP-infused wrap), and PCL-Bi with MSCs.

RESULTS

Physicochemical characterization and in vitro biocompatibility tests revealed that BiNP infusion did not alter the wrap's non-cytotoxicity toward vascular cells, hemocompatibility, and capacity for MSC loading but facilitated long-term monitoring via micro-computed tomography. After 8 weeks, all treatment groups demonstrated significant improvement in wall-to-lumen ratio on ultrasonography (P < 0.001), neointima-to-lumen ratio on histomorphometry (P < 0.001), and attenuation of neointimal hypoxia on immunohistochemistry (P < 0.05). Compared to non-MSC wraps, MSC-loaded wraps not only attenuated endothelial dysfunction and neointimal inflammation but also reduced hypoxia and inflammation across all vascular layers.

CONCLUSION

These results demonstrate that MSC delivery through a radiopaque polymeric wrap could enhance AVF patency outcomes through the inhibition of multiple pathways inducing AVF failure.

Rosuvastatin-Eluting Gold Nanoparticle-Loaded Perivascular Implantable Wrap for Enhanced Arteriovenous Fistula Maturation in a Murine Model

Background

Arteriovenous fistulas (AVFs) are a vital intervention for patients requiring hemodialysis, but they also contribute to overall mortality due to access malfunction. The most common cause of both AVF non-maturation and secondary failure is neointimal hyperplasia (NIH). Absorbable polycaprolactone (PCL) perivascular wraps can address these complications by incorporating drugs to attenuate NIH, such as rosuvastatin (ROSU), and metallic nanoparticles for visualization and device monitoring.

Objectives

This study aimed to assess the impacts of gold nanoparticle (AuNP) and ROSU-loaded perivascular wraps on vasculature NIH and AVF maturation and patency in a chronic kidney disease rat model.

Methods

Electrospun wraps containing combinations of PCL, AuNP, and ROSU were monitored for in vitro drug elution, nanoparticle release, tensile strength, and cell viability. Perivascular wraps were implanted in chronic kidney disease rats for in vivo ultrasound (US) and micro-computed tomography (mCT) imaging. AVF specimens were collected for histological analyses.

Results

No difference in cell line viability was observed in ROSU-containing grafts. In vitro release studies of ROSU and AuNPs correlated with decreasing radiopacity over time on in vivo mCT analysis. The mCT study also demonstrated increased radiopacity in AuNP-loaded wraps compared with PCL and control. The addition of ROSU demonstrated decreased US and histologic measurements of NIH.

Conclusions

The reduced NIH seen with ROSU-loading of perivascular wraps suggests a synergistic effect between mechanical support and anti-hyperplasia medication. Furthermore, the addition of AuNPs increased wrap radiopacity. Together, our results show that radiopaque, AuNP-, and ROSU-loaded PCL grafts induce AVF maturation and suppress NIH while facilitating optimal implanted device visualization.

Current Perspectives and Progress in Preoperative Portal Vein Embolization with Stem Cell Augmentation (PVESA)

Portal vein embolization with stem cell augmentation (PVESA) is an emerging approach for enhancing the growth of the liver segment that will remain after surgery (i.e., future liver remnant, FLR) in patients with liver cancer. Conventional portal vein embolization (PVE) aims to induce preoperative FLR growth, but it has a risk of failure in patients with underlying liver dysfunction and comorbid illnesses. PVESA combines PVE with stem cell therapy to potentially improve FLR size and function more effectively and efficiently. Various types of stem cells can help improve liver growth by secreting paracrine signals for hepatocyte growth or by transforming into hepatocytes. Mesenchymal stem cells (MSCs), unrestricted somatic stem cells, and small hepatocyte-like progenitor cells have been used to augment liver growth in preclinical animal models, while clinical studies have demonstrated the benefit of CD133 + bone marrow-derived MSCs and hematopoietic stem cells. These investigations have shown that PVESA is generally safe and enhances liver growth after PVE. However, optimizing the selection, collection, and application of stem cells remains crucial to maximize benefits and minimize risks. Additionally, advanced stem cell technologies, such as priming, genetic modification, and extracellular vesicle-based therapy, that could further enhance efficacy outcomes should be evaluated. Despite its potential, PVESA requires more investigations, particularly mechanistic studies that involve orthotopic animal models of liver cancer with concomitant liver injury as well as larger human trials.

Integration of Electrospun Scaffolds and Biological Polymers for Enhancing the Delivery and Efficacy of Mesenchymal Stem/Stromal Cell Therapies

Mesenchymal stem/stromal cells (MSCs) have emerged as a promising therapeutic approach for a variety of diseases due to their immunomodulatory and tissue regeneration capabilities. Despite their potential, the clinical application of MSC therapies is hindered by limited cell retention and engraftment at the target sites. Electrospun scaffolds, with their high surface area-to-volume ratio and tunable physicochemical properties, can be used as platforms for MSC delivery. However, synthetic polymers often lack the bioactive cues necessary for optimal cell-scaffold interactions. Integrating electrospun scaffolds and biological polymers, such as polysaccharides, proteins, and composites, combines the mechanical integrity of synthetic materials with the bioactivity of natural polymers and represents a strategic approach to enhance cell-scaffold interactions. The molecular interactions between MSCs and blended or functionalized scaffolds have been examined in recent studies, and it has been shown that integration can enhance MSC adhesion, proliferation, and paracrine secretion through the activation of multiple signaling pathways, such as FAK/Src, MAPK, PI3K/Akt, Wnt/β-catenin, and YAP/TAZ. Preclinical studies on small animals also reveal that the integration of electrospun scaffolds and natural polymers represents a promising approach to enhancing the delivery and efficacy of MSCs in the context of regenerating bone, cartilage, muscle, cardiac, vascular, and nervous tissues. Future research should concentrate on identifying the distinct characteristics of the MSC niche, investigating the processes involved in MSC-scaffold interactions, and applying new technologies in stem cell treatment and biofabrication to enhance scaffold design. Research on large animal models and collaboration among materials scientists, engineers, and physicians are crucial to translating these advancements into clinical use.

Bioresorbable Mesenchymal Stem Cell-Loaded Electrospun Polymeric Scaffold Inhibits Neointimal Hyperplasia Following Arteriovenous Fistula Formation in a Rat Model of Chronic Kidney Disease

Bioresorbable perivascular scaffolds loaded with antiproliferative agents have been shown to enhance arteriovenous fistula (AVF) maturation by inhibiting neointimal hyperplasia (NIH). These scaffolds, which can mimic the three-dimensional architecture of the vascular extracellular matrix, also have an untapped potential for the local delivery of cell therapies against NIH. Hence, an electrospun perivascular scaffold from polycaprolactone (PCL) to support mesenchymal stem cell (MSC) attachment and gradual elution at the AVF's outflow vein is fabricated. Chronic kidney disease (CKD) in Sprague-Dawley rats is induced by performing 5/6th nephrectomy, then AVFs for scaffold application are created. The following groups of CKD rats are compared: no perivascular scaffold (i.e., control), PCL alone, and PCL+MSC scaffold. PCL and PCL+MSC significantly improve ultrasonographic (i.e., luminal diameter, wall-to-lumen ratio, and flow rate) and histologic (i.e., neointima-to-lumen ratio, neointima-to-media ratio) parameters compared to control, with PCL+MSC demonstrating further improvement in these parameters compared to PCL alone. Moreover, only PCL+MSC significantly reduces 18 F-fluorodeoxyglucose uptake on positron emission tomography. These findings suggest that adding MSCs promotes greater luminal expansion and potentially reduces the inflammatory process underlying NIH. The results demonstrate the utility of mechanical support loaded with MSCs at the outflow vein immediately after AVF formation to support maturation by minimizing NIH.

Antibody-Targeted Bismuth Gadolinium Nanoconjugate for Image-Guided Radiotherapy of Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC), one of the most lethal cancers of the liver, has limited treatment options at advanced stages. Here, bismuth gadolinium (BiGd) nanoparticles (NPs) conjugated with anti-vascular endothelial growth factor antibody (aVEGF) are designed and tested for targeted image-guided radiation therapy against HCC. The BiGd NPs are synthesized using the sol-gel technique, functionalized with silica NPs, and labeled with fluorescent protamine-rhodamine B. For tumor targeting, the NPs are conjugated with aVEGF, and an in vitro study confirms the binding of the aVEGF-BiGd nanoconjugate to McA-RH7777 hepatoma cells. Biocompatibility of the aVEGF-BiGd nanoconjugate is evaluated using McA-RH7777 cells, with no cytotoxicity observed even at 250 μg/mL. Also, aVEGF-BiGd demonstrates in vivo microcomputed tomography contrast enhancement. NPs and/or radiation therapy (RT) is conducted in female BALB/c nude mice with subcutaneously implanted McA-RH7777 cells, and a significant reduction in tumor size is observed in the mice treated with the aVEGF-BiGd nanoconjugate and RT compared to other groups (p < 0.01). The combined effect of nanoconjugate and RT exhibits decreased vascularity, cell proliferation, and increased apoptosis. This study demonstrates the potential of the developed hybrid BiGd nanoconjugate for targeted and image-guided radiotherapy of HCC.

Controlled Delivery of Rosuvastatin or Rapamycin through Electrospun Bismuth Nanoparticle-Infused Perivascular Wraps Promotes Arteriovenous Fistula Maturation

In the context of arteriovenous fistula (AVF) failure, local delivery enables the release of higher concentrations of drugs that can suppress neointimal hyperplasia (NIH) while reducing systemic adverse effects. However, the radiolucency of polymeric delivery systems hinders long-term in vivo surveillance of safety and efficacy. We hypothesize that using a radiopaque perivascular wrap to deliver anti-NIH drugs could enhance AVF maturation. Through electrospinning, we fabricated multifunctional perivascular polycaprolactone (PCL) wraps loaded with bismuth nanoparticles (BiNPs) for enhanced radiologic visibility and drugs that can attenuate NIH─rosuvastatin (Rosu) and rapamycin (Rapa). The following groups were tested on the AVFs of a total of 24 Sprague-Dawley rats with induced chronic kidney disease: control (i.e., without wrap), PCL-Bi (i.e., wrap with BiNPs), PCL-Bi-Rosu, and PCL-Bi-Rapa. We found that BiNPs significantly improved the wraps' radiopacity without affecting biocompatibility. The drug release profiles of Rosu (hydrophilic drug) and Rapa (hydrophobic drug) differed significantly. Rosu demonstrated a burst release followed by gradual tapering over 8 weeks, while Rapa demonstrated a gradual release similar to that of the hydrophobic BiNPs. In vivo investigations revealed that both drug-loaded wraps can reduce vascular stenosis on ultrasonography and histomorphometry, as well as reduce [18F]Fluorodeoxyglucose uptake on positron emission tomography. Immunohistochemical studies revealed that PCL-Bi-Rosu primarily attenuated endothelial dysfunction and hypoxia in the neointimal layer, while PCL-Bi-Rapa modulated hypoxia, inflammation, and cellular proliferation across the whole outflow vein. In summary, the controlled delivery of drugs with different properties and mechanisms of action against NIH through a multifunctional, radiopaque perivascular wrap can improve imaging and histologic parameters of AVF maturation.

Gold Nanoparticles for Monitoring of Mesenchymal Stem-Cell-Loaded Bioresorbable Polymeric Wraps for Arteriovenous Fistula Maturation

Mesenchymal stem cell (MSC)-seeded polymeric perivascular wraps have been shown to enhance arteriovenous fistula (AVF) maturation. However, the wraps' radiolucency makes their placement and integrity difficult to monitor. Through electrospinning, we infused gold nanoparticles (AuNPs) into polycaprolactone (PCL) wraps to improve their radiopacity and tested whether infusion affects the previously reported beneficial effects of the wraps on the AVF's outflow vein. Sprague Dawley rat MSCs were seeded on the surface of the wraps. We then compared the effects of five AVF treatments-no perivascular wrap (i.e., control), PCL wrap, PCL + MSC wrap, PCL-Au wrap, and PCL-Au + MSC wrap-on AVF maturation in a Sprague Dawley rat model of chronic kidney disease (n = 3 per group). Via micro-CT, AuNP-infused wraps demonstrated a significantly higher radiopacity compared to that of the wraps without AuNPs. Wraps with and without AuNPs equally reduced vascular stenoses, as seen via ultrasonography and histomorphometry. In the immunofluorescence analysis, representative MSC-seeded wraps demonstrated reduced neointimal staining for markers of infiltration with smooth muscle cells (α-SMA), inflammatory cells (CD45), and fibroblasts (vimentin) compared to that of the control and wraps without MSCs. In conclusion, AuNP infusion allows in vivo monitoring via micro-CT of MSC-seeded polymeric wraps over time, without compromising the benefits of the wrap for AVF maturation.

Emerging Biomedical and Clinical Applications of 3D-Printed Poly(Lactic Acid)-Based Devices and Delivery Systems

Poly(lactic acid) (PLA) is widely used in the field of medicine due to its biocompatibility, versatility, and cost-effectiveness. Three-dimensional (3D) printing or the systematic deposition of PLA in layers has enabled the fabrication of customized scaffolds for various biomedical and clinical applications. In tissue engineering and regenerative medicine, 3D-printed PLA has been mostly used to generate bone tissue scaffolds, typically in combination with different polymers and ceramics. PLA's versatility has also allowed the development of drug-eluting constructs for the controlled release of various agents, such as antibiotics, antivirals, anti-hypertensives, chemotherapeutics, hormones, and vitamins. Additionally, 3D-printed PLA has recently been used to develop diagnostic electrodes, prostheses, orthoses, surgical instruments, and radiotherapy devices. PLA has provided a cost-effective, accessible, and safer means of improving patient care through surgical and dosimetry guides, as well as enhancing medical education through training models and simulators. Overall, the widespread use of 3D-printed PLA in biomedical and clinical settings is expected to persistently stimulate biomedical innovation and revolutionize patient care and healthcare delivery.

Gold Nanoparticles for Monitoring of Mesenchymal Stem Cell-Loaded Bioresorbable Polymeric Wraps for Arteriovenous Fistulas

Background

To address high rates of arteriovenous fistula (AVF) failure, a mesenchymal stem cell (MSC)-seeded polymeric perivascular wrap has been developed to reduce neointimal hyperplasia (NIH) and enhance AVF maturation in a rat model. However, the wrap's radiolucency makes its placement and integrity difficult to monitor.

Purpose

In this study, we infused gold nanoparticles (AuNPs) into the polymeric perivascular wrap to improve its radiopacity and tested the effect of infusion on the previously reported beneficial effects of the polymeric wrap on the AVF outflow vein.

Materials and Methods

We fabricated a polymeric perivascular wrap made of polycaprolactone (PCL) infused with AuNPs via electrospinning. Sprague-Dawley rat mesenchymal stem cells (MSCs) were seeded on the surface of the wraps. We then compared the effect of five AVF treatments-no perivascular wrap (i.e., control), PCL wrap, PCL+MSC wrap, PCL-Au wrap, and PCL-Au+MSC wrap-on AVF maturation in a Sprague-Dawley rat model of chronic kidney disease (n=3 per group). Statistical significance was defined as p<.05, and one-way analysis of variance was performed using GraphPad Prism software.

Results

On micro-CT, AuNP-infused wraps demonstrated significantly higher radiopacity compared to wraps without AuNPs. On ultrasonography, wraps with and without AuNPs equally reduced the wall-to-lumen ratio of the outflow vein, a marker of vascular stenosis. On histomorphometric analysis, wraps with and without AuNPs equally reduced the neointima-to- lumen ratio of the outflow vein, a measure of NIH. On immunofluorescence analysis, representative MSC-seeded wraps demonstrated reduced neointimal staining for markers of smooth muscle cells (α-SMA), inflammatory cells (CD45), and fibroblasts (vimentin) infiltration when compared to control and wraps without MSCs.

Conclusion

Gold nanoparticle infusion allows the in vivo monitoring via micro-CT of a mesenchymal stem cell-seeded polymeric wrap over time without compromising the benefits of the wrap on arteriovenous fistula maturation.

Summary Statement

Gold nanoparticle infusion enables in vivo monitoring via micro-CT of the placement and integrity over time of mesenchymal stem cell-seeded polymeric wrap supporting arteriovenous fistula maturation.

Key Results

Gold nanoparticle (AuNP)-infused perivascular wraps demonstrated higher radiopacity on micro-CT compared with wraps without AuNPs after 8 weeks.AuNP-infused perivascular wraps equally improved the wall-to-lumen ratio of the outflow vein (a marker of vascular stenosis) when compared with wraps without AuNPs, as seen on US.AuNP-infused perivascular wraps equally reduced the neointima-to-lumen ratio of the outflow vein (a measure of neointimal hyperplasia) when compared with wraps without AuNPs, as seen on histomorphometry.

Current Biomedical Applications of 3D-Printed Hydrogels

Three-dimensional (3D) printing, also known as additive manufacturing, has revolutionized the production of physical 3D objects by transforming computer-aided design models into layered structures, eliminating the need for traditional molding or machining techniques. In recent years, hydrogels have emerged as an ideal 3D printing feedstock material for the fabrication of hydrated constructs that replicate the extracellular matrix found in endogenous tissues. Hydrogels have seen significant advancements since their first use as contact lenses in the biomedical field. These advancements have led to the development of complex 3D-printed structures that include a wide variety of organic and inorganic materials, cells, and bioactive substances. The most commonly used 3D printing techniques to fabricate hydrogel scaffolds are material extrusion, material jetting, and vat photopolymerization, but novel methods that can enhance the resolution and structural complexity of printed constructs have also emerged. The biomedical applications of hydrogels can be broadly classified into four categories-tissue engineering and regenerative medicine, 3D cell culture and disease modeling, drug screening and toxicity testing, and novel devices and drug delivery systems. Despite the recent advancements in their biomedical applications, a number of challenges still need to be addressed to maximize the use of hydrogels for 3D printing. These challenges include improving resolution and structural complexity, optimizing cell viability and function, improving cost efficiency and accessibility, and addressing ethical and regulatory concerns for clinical translation.