Improving understanding of carbon storage in wood in landfills: Evidence from reactor studies

Approximately 1.5 million tonnes (Mt) of wood waste are disposed of in Australian landfills annually. Recent studies have suggested that anaerobic decay levels of wood in landfills are low, although knowledge of the decay of individual wood species is limited. The objective of this study was to establish the extent of carbon loss for wood species of commercial importance in Australia including radiata pine, blackbutt, spotted gum and mountain ash. Experiments were conducted under laboratory conditions designed to simulate optimal anaerobic biodegradation in a landfill. Bacterial degradation, identified by both light microscopy and electron microscopy, occurred to a varying degree in mountain ash and spotted gum wood. Fungal decay was not observed in any wood samples. Mountain ash, the species with the highest methane yield (20.9 mL CH₄/g) also had the highest holocellulose content and the lowest acid-insoluble lignin and extractive content. As the decay levels for untreated radiata pine were very low, it was not possible to determine whether impregnation of radiata pine with chemical preservatives had any impact on decay. Carbon losses estimated from gas generation were below 5% for all species tested. Carbon losses as estimated by gas generation were lower than those derived by mass balance in most reactors, suggesting that mass loss does not necessarily equate to carbon emissions. There was no statistical difference between decay of blackbutt derived from plantation and older, natural forests. Addition of paper as an easily digestible feedstock did not increase carbon loss for the two wood species tested and the presence of radiata pine had an inhibitory effect on copy paper decay. Although differences between some of the wood types were found to be statistically significant, these differences were detected for wood with carbon losses that did not exceed 5%. The suggested factor for carbon loss for wood in landfills in Australia is 1.4%. This study confirms that disposal of wood in landfills in Australia results in long-term storage of carbon, with only minimal conversion of carbon to gaseous end products.

Carbon dynamics of paper, engineered wood products and bamboo in landfills: evidence from reactor studies

BACKGROUND

There has been growing interest in the development of waste-specific decay factors for estimation of greenhouse gas emissions from landfills in national greenhouse gas inventories. Although engineered wood products (EWPs) and paper represent a substantial component of the solid waste stream, there is limited information available on their carbon dynamics in landfills. The objective of this study was to determine the extent of carbon loss for EWPs and paper products commonly used in Australia. Experiments were conducted under laboratory conditions designed to simulate optimal anaerobic biodegradation in a landfill.

RESULTS

Methane generation rates over incubations of 307-677 days ranged from zero for medium-density fibreboard (MDF) to 326 mL CH₄ g^-1 for copy paper. Carbon losses for particleboard and MDF ranged from 0.7 to 1.6%, consistent with previous estimates. Carbon loss for the exterior wall panel product (2.8%) was consistent with the expected value for blackbutt, the main wood type used in its manufacture. Carbon loss for bamboo (11.4%) was significantly higher than for EWPs. Carbon losses for the three types of copy paper tested ranged from 72.4 to 82.5%, and were significantly higher than for cardboard (27.3-43.8%). Cardboard that had been buried in landfill for 20 years had a carbon loss of 27.3%-indicating that environmental conditions in the landfill did not support complete decomposition of the available carbon. Thus carbon losses for paper products as measured in bioreactors clearly overestimate those in actual landfills. Carbon losses, as estimated by gas generation, were on average lower than those derived by mass balance. The low carbon loss for particleboard and MDF is consistent with carbon loss for Australian wood types described in previous studies. A factor for carbon loss for combined EWPs and wood in landfills in Australia of 1.3% and for paper of 48% is proposed.

CONCLUSIONS

The new suggested combined decay factor for wood and EWPs represents a significant reduction from the current factor used in the Australian greenhouse gas inventory; whereas the suggested decay factor for paper is similar to the current decay factor. Our results improve current understanding of the carbon dynamics of harvested wood products, and allow more refined estimates of methane emissions from landfills.

Stem cell-derived neurons from autistic individuals with SHANK3 mutation show morphogenetic abnormalities during early development

Shank3 is a structural protein found predominantly at the postsynaptic density. Mutations in the SHANK3 gene have been associated with risk for autism spectrum disorder (ASD). We generated induced pluripotent stem cells (iPSCs) from control individuals and from human donors with ASD carrying microdeletions of SHANK3. In addition, we used Zinc finger nucleases to generate isogenic SHANK3 knockout human embryonic stem (ES) cell lines. We differentiated pluripotent cells into either cortical or olfactory placodal neurons. We show that patient-derived placodal neurons make fewer synapses than control cells. Moreover, patient-derived cells display a developmental phenotype: young postmitotic neurons have smaller cell bodies, more extensively branched neurites, and reduced motility compared with controls. These phenotypes were mimicked by SHANK3-edited ES cells and rescued by transduction with a Shank3 expression construct. This developmental phenotype is not observed in the same iPSC lines differentiated into cortical neurons. Therefore, we suggest that SHANK3 has a critical role in neuronal morphogenesis in placodal neurons and that early defects are associated with ASD-associated mutations.

An update on natural occurrence and biological activity of chromones

The chemistry of chromones is very well known. This system is widely used in organic chemistry as an intermediate compound for the synthesis of numerous hetrocycles. On the other hand, chromones were extensively studied as bioactive compounds. They possess remarkable biological activities, such as antimicrobial, antiviral, anticancer, anti-inflammatory, antioxidant, etc. This comprehensive review describes the current status and knowledge of natural occurrence, and biological activities of chromones. Recent advances made over the last decade i.e. January 1999 to December 2009 are critically discussed and we have covered about 176 references and more than 350 compounds reported during this period.

Control of subterranean termites (Isoptera: Rhinotermitidae) infesting power poles

A trial was conducted to determine the efficacy of termiticidal dusts (arsenic trioxide, triflumuron, and Metarhizium anisopliae), a timber fumigant (dazomet) and liquid termiticides (bifenthrin, chlorfenapyr, chlorpyrifos, fipronil, and imidacloprid) for controlling subterranean termites (Isoptera: Rhinotermitidae) infesting in-service power poles in New South Wales, Australia. Dusts were applied to parts of the pole where termites were present. Fumigant was inserted into holes drilled into the base of the pole. Liquid termiticides were mixed with soil around the base of the pole and injected into internal voids if present. Poles were inspected for up to 5 yr, and the time taken for reinfestation to occur was recorded. Before the start of the trial, the major Australian pole owners were surveyed to obtain an estimate of the annual national cost of termite infestation to the power supply industry. The annual costs of termite treatment and replacing damaged poles were estimated at AU$2 million and AU$13 million, respectively. Infestation rates were lower for all treatments compared with controls within the first 12 mo of the study. Dazomet, arsenic trioxide, fipronil, and chlorpyrifos were the most efficacious treatments. Efficacy was positively related to the amount of termiticide applied and negatively related to the infestation severity but was unaffected by geographical location. Survival curves were calculated of the time elapsed before the recurrence of termite infestations (survival absence of reinfestation). Survival was highest for poles treated with liquid termiticides.

Influence of biochars on nitrous oxide emission and nitrogen leaching from two contrasting soils

The influence of biochar on nitrogen (N) transformation processes in soil is not fully understood. This study assessed the influence of four biochars (wood and poultry manure biochars synthesized at 400 degrees C, nonactivated, and at 550 degrees C, activated, abbreviated as: W400, PM400, W550, PM550, respectively) on nitrous oxide (N2O) emission and N leaching from an Alfisol and a Vertisol. Repacked soil columns were subjected to three wetting-drying (W-D) cycles to achieve a range of water-filled pore space (WFPS) over a 5-mo period. During the first two W-D cycles, W400 and W550 had inconsistent effects on N2O emissions and the soils amended with PM400 produced higher N2O emissions relative to the control. The initially greater N2O emission from the PM400 soils was ascribed to its higher labile intrinsic N content than the other biochars. During the third W-D cycle, all biochar treatments consistently decreased N2O emissions, cumulatively by 14 to 73% from the Alfisol and by 23 to 52% from the Vertisol, relative to their controls. In the first leaching event, higher nitrate leaching occurred from the PM400-amended soils compared with the other treatments. In the second event, the leaching of ammonium was reduced by 55 to 93% from the W550- and PM550-Alfisol and Vertisol, and by 87 to 94% from the W400- and PM400-Vertisol only (cf. control). We propose that the increased effectiveness of biochars in reducing N2O emissions and ammonium leaching over time was due to increased sorption capacity of biochars through oxidative reactions on the biochar surfaces with ageing.