Trust in physicians and medical institutions: what is it, can it be measured, and does it matter?

Despite the profound and pervasive importance of trust in medical settings, there is no commonly shared understanding of what trust means, and little is known about what difference trust actually makes, what factors affect trust, and how trust relates to other similar attitudes and behaviors. To address this gap in understanding, the emerging theoretical, empirical, and public policy literature on trust in physicians and in medical institutions is reviewed and synthesized. Based on this review and additional research and analysis, a formal definition and conceptual model of trust is presented, with a review of the extent to which this model has been confirmed by empirical studies. This conceptual and empirical understanding has significance for ethics, law, and public policy.

Evaluation of some essential oils for their toxicity against fungi causing deterioration of stored food commodities

During screening of essential oils for their antifungal activities against Aspergillus flavus, the essential oil of Cymbopogon citratus was found to exhibit fungitoxicity. The MIC of the oil was found to be 1,000 ppm, at which it showed its fungistatic nature, wide fungitoxic spectrum, nonphytotoxic nature, and superiority over synthetic fungicides, i.e., Agrosan G. N., Thiride, Ceresan, Dithane M-45, Agrozim, Bavistin, Emison, Thiovit, wettable sulfur, and copper oxychloride. The fungitoxic potency of the oil remained unaltered for 7 months of storage and upon introduction of high doses of inoculum of the test fungus. It was thermostable in nature with treatment at 5 to 100 degrees C. These findings thus indicate the possibility of exploitation of the essential oil of C. citratus as an effective inhibitor of storage fungi.

Influence of administration route on tumor uptake and biodistribution of etoposide loaded solid lipid nanoparticles in Dalton's lymphoma tumor bearing mice

The study evaluates the capability of tripalmitin nanoparticles in enhancing the tumor uptake of etoposide, and the influence of administration route on the biodistribution and tumor uptake of etoposide loaded tripalmitin (ETPL) nanoparticles in Dalton's lymphoma tumor bearing mice. ETPL nanoparticles were prepared by melt-emulsification and high pressure homogenization followed by the spray drying of nanodispersion. Characterization of the nanoparticles was done by particle size analysis, zeta potential measurement and scanning electron microscopy. The size of ETPL nanoparticles was 387 nm and possessed negative charge. Etoposide and ETPL nanoparticles were radiolabeled with 99mTc with high labeling efficiency. The labeled complexes showed good in vitro stability in the presence of DTPA/cysteine and serum stability. Etoposide and ETPL nanoparticles were injected by subcutaneous, intravenous or intraperitoneal routes and their biodistribution and tumor uptake were determined. Subcutaneous injection reduced the distribution of ETPL nanoparticles to all the tissues studied whereas after intraperitoneal injection, the distribution of ETPL nanoparticles to tissues was higher than free etoposide. The intravenous injection resulted in lower concentrations of ETPL nanoparticles in the organs of RES compared to free etoposide. ETPL nanoparticles experienced significantly high brain distribution after intraperitoneal injection indicating its potential use in targeting etoposide to brain tumors. After subcutaneous injection, the tissue distribution of ETPL nanoparticles increased with time indicating their accumulation at the injection site for a longer time. The tumor uptake of both etoposide and ETPL nanoparticles was significantly high after subcutaneous injection (P<0.001) compared to the other routes of administration. The tumor concentration of ETPL nanoparticles after subcutaneous injection was 59 folds higher than that obtained after intravenous and 8 folds higher than after intraperitoneal route at 24 h post-injection. The tumor concentration of ETPL nanoparticles increased with time after subcutaneous injection indicating the slower and progressive penetration from the injection site into the tumor. The study signifies the advantage of incorporating etoposide into tripalmitin nanoparticles in controlling its biodistribution and enhancing the tumor uptake by several folds. The study also reveals that, of the three routes investigated, subcutaneous injection is the route of preference for facilitating high tumor uptake and retention and is likely to have greater antitumor effect resulting in tumor regression.

DNRA: A short-circuit in biological N-cycling to conserve nitrogen in terrestrial ecosystems

This paper reviews dissimilatory nitrate reduction to ammonium (DNRA) in soils - a newly appreciated pathway of nitrogen (N) cycling in the terrestrial ecosystems. The reduction of NO₃^- occurs in two steps; in the first step, NO₃^- is reduced to NO₂^-; and in the second, unlike denitrification, NO₂^- is reduced to NH₄⁺ without intermediates. There are two sets of NO₃^-/NO₂^- reductase enzymes, i.e., Nap/Nrf and Nar/Nir; the former occurs on the periplasmic-membrane and energy conservation is respiratory via electron-transport-chain, whereas the latter is cytoplasmic and energy conservation is both respiratory and fermentative (Nir, substrate-phosphorylation). Since, Nir catalyzes both assimilatory- and dissimilatory-nitrate reduction, the nrfA gene, which transcribes the NrfA protein, is treated as a molecular-marker of DNRA; and a high nrfA/nosZ (N₂O-reductase) ratio favours DNRA. Recently, several crystal structures of NrfA have been presumed to producee N₂O as a byproduct of DNRA via the NO (nitric-oxide) pathway. Meta-analyses of about 200 publications have revealed that DNRA is regulated by oxidation state of soils and sediments, carbon (C)/N and NO₂^-/NO₃^- ratio, and concentrations of ferrous iron (Fe²⁺) and sulfide (S^2-). Under low-redox conditions, a high C/NO₃^- ratio selects for DNRA while a low ratio selects for denitrification. When the proportion of both C and NO₃^- are equal, the NO₂^-/NO₃^- ratio modulates partitioning of NO₃^-, and a high NO₂^-/NO₃^- ratio favours DNRA. A high S^2-/NO₃^- ratio also promotes DNRA in coastal-ecosystems and saline sediments. Soil pH, temperature, and fine soil particles are other factors known to influence DNRA. Since, DNRA reduces NO₃^- to NH₄⁺, it is essential for protecting NO₃^- from leaching and gaseous (N₂O) losses and enriches soils with readily available NH₄⁺-N to primary producers and heterotrophic microorganisms. Therefore, DNRA may be treated as a tool to reduce ground-water NO₃^- pollution, enhance soil health and improve environmental quality.

Alginate microspheres of isoniazid for oral sustained drug delivery

In the present study, spherical microspheres able to prolong the release of INH were produced by a modified emulsification method, using sodium alginate as the hydrophilic carrier. The shape and surface characteristics were determined by scanning electron microscopy using gold sputter technique. Particle sizes of both placebo and drug-loaded formulations were measured by SEM and the particle size distribution was determined by an optical microscope. The physical state of the drug in the formulation was determined by differential scanning calorimetry (DSC). The release profiles of INH from microspheres were examined in simulated gastric fluid (SGF pH 1.2) and simulated intestinal fluid (SIF pH 7.4). Gamma-scintigraphic studies were carried out to determine the location of microspheres on oral administration and the extent of transit through the gastrointestinal tract (GIT). The microspheres had a smoother surface and were found to be discreet and spherical in shape. The particles were heterogeneous with the maximum particles of an average size of 3.719mum. Results indicated that the mean particle size of the microspheres increased with an increase in the concentration of polymer and the cross-linker as well as the cross-linking time. The entrapment efficiency was found to be in the range of 40-91%. Concentration of the cross-linker up to 7.5% caused increase in the entrapment efficiency and the extent of drug release. Optimized isoniazid-alginate microspheres were found to possess good bioadhesion (72.25+/-1.015%). The bioadhesive property of the particles resulted in prolonged retention in the small intestine. Microspheres could be observed in the intestinal lumen at 4h and were detectable in the intestine 24h post-oral administration, although the percent radioactivity had significantly decreased (t(1/2) of (99m)Tc=4-5h). Increased drug loading (91%) was observed for the optimized formulation suggesting the efficiency of the method. Nearly 26% of INH was released in SGF pH 1.2 in 6h and 71.25% in SIF pH 7.4 in 30h. No significant drug-polymer interactions were observed in FT-IR studies. Dissolution and gamma-scintigraphy studies have shown promising results proving the utility of the formulation for enteric drug delivery.

Lipid bilayer partitioning and stability of camptothecin drugs

The intense intrinsic fluorescence emissions from several clinically relevant camptothecin drugs have been exploited in order to determine (1) the structural basis of drug binding to lipid bilayers, (2) the lipid bilayer stability of each drug's alpha-hydroxylactone moiety, a pharmacophore which is essential for antitumor activity, and (3) the site of drug binding in the bilayer. Equilibrium affinities of camptothecin and related congeners for small unilamellar vesicles composed of electroneutral dimyristoylphosphatidylcholine (DMPC) or negatively-charged dimyristoylphosphatidylglycerol (DMPG) were determined using the method of fluorescence anisotropy titration. Experiments were conducted in phosphate-buffered saline (PBS) at 37 degrees C and overall association constants (K values) were determined. Of the seven compounds studied, the new compound 9-chloro-10,11-methylenedioxy-(20S)-camptothecin (CMC) was found to display the highest membrane affinities (KDMPC = 400 M-1, KDMPG = 320 M-1), followed by 10,11-methylenedioxy-camptothecin and camptothecin, which exhibited KDMPC and KDMPG values of 100 M-1 or greater. Topotecan displayed markedly reduced binding to lipid bilayers (KDMPC = 10 M-1, KDMPG = 50 M-1). HPLC assays were subsequently employed to assess the relative stabilities of the lactone ring of membrane-bound drugs. Our results clearly indicate that lipid bilayer interactions stabilize the lactone moiety of camptothecin drugs. In comparison to half-lives in PBS (37 degrees C) of 17 and 19 min for camptothecin and CMC, respectively, DMPC- or DMPG-bound drugs were found to be stable even for periods up to 72 h. Iodide quenching data indicate that membrane-bound camptothecin intercalates between the lipid acyl chains, in a protected environment well removed from the aqueous interface. In this manner lipid bilayer interactions stabilize the lactone ring structure of camptothecins and thereby conserve the biologically active form of each medication.

Brain targeting of risperidone-loaded solid lipid nanoparticles by intranasal route

Intranasal drug delivery is known to overcome the blood-brain barrier (BBB) for delivery of drugs to brain. The objective of this study was to prepare risperidone (RSP)-loaded solid lipid nanoparticles (RSLNs) and explore the possibility of brain targeting by nose-to-brain delivery. RSLNs were prepared by solvent emulsification-solvent evaporation method and characterized for drug content, particle size and size distribution, zeta potential, and in vitro drug-release study. The pharmacodynamic study of RSLNs, which was performed by paw test using Perspex platform, showed higher hindlimb retraction time (HRT) values as compared with RSP solution (RS) indicating the superiority of RSLNs over the RS for brain targeting. The pharmacokinetics and biodistribution studies in mice showed that brain/blood ratio 1 h post-administration of RSLNs (i.n.) was found to be 1.36 ± 0.06 (nearly 10- and 5-fold higher) as compared with 0.17 ± 0.05 for RS (i.v.) and 0.78 ± 0.07 for RSLNs (i.v.), respectively. Gamma scintigraphy imaging of mice brain following intravenous and intranasal administration confirmed the localization of drug in brain. This finding substantiates the existence of direct nose-to-brain delivery route for nanoparticles administered to the nasal cavity.

Mucoadhesive nanoemulsion-based intranasal drug delivery system of olanzapine for brain targeting

The objective of the present study was to optimize olanzapine nanoemulsion (ONE), for nose-to-brain delivery. The nanoemulsions and olanzapine mucoadhesive nanoemulsions (OMNEs) were prepared using water titration method and characterized for technical and electrokinetic properties. Biodistribution of nanoemulsions and olanzapine solution (OS) in the brain and blood of rats following intranasal (intranasal) and intravenous (intravenous) administrations were examined using optimized technetium-labeled ((99m)Tc-labeled) olanzapine formulations. The brain/blood uptake ratios of 0.45, 0.88, 0.80, and 0.04 of OS (intranasal), ONE (intranasal), OMNE (intranasal), ONE (intravenous), respectively, at 0.5 h are indicative of direct nose-to-brain transport (DTP). Higher % drug targeting efficiency (%DTE) and %DTP for mucoadhesive nanoemulsions indicated effective brain targeting of olanzapine among the prepared nanoemulsions. Gamma scintigraphy imaging of the rat brain conclusively demonstrated rapid and larger extent of transport of olanzapine by OMNE (intranasal), when compared with OS (intranasal), ONE (intranasal), and ONE (intravenous), into the rat brain.

Oxidation of thiosulfate by a new bacterium, Bosea thiooxidans (strain BI-42) gen. nov., sp. nov.: analysis of phylogeny based on chemotaxonomy and 16S ribosomal DNA sequencing

A gram-negative bacterium which was capable of oxidizing reduced inorganic sulfur compounds was isolated from agricultural soil and designated BI-42. This new isolate grew on a wide range of organic substrates but was not able to grow autotrophically and lacked ribulose 1,5-bisphosphate carboxylase, a key enzyme of carbon dioxide fixation. These results suggested that strain BI-42 was a chemolithoheterotroph. Ammonia and nitrate were not used as sole nitrogen sources for growth, and strain BI-42 lacked glutamate synthase activity, which resulted in glutamate auxotrophy. The glutamate dehydrogenase activity of this organism was apparently insufficient for ammonia assimilation. On the basis of the results of additional biochemical tests, the G + C content of the DNA, the results of a respiratory ubiquinone analysis, the results of a 16S ribosomal DNA sequence analysis, the fatty acid composition, and the results of a membrane lipid analysis, strain BI-42 was identified as a phylogenetically and physiologically distinct taxon belonging to the alpha subclass of the Proteobacteria. Bosea thiooxidans gen. nov., sp. nov. is the name proposed for this taxon.

Rapid expansion from supercritical to aqueous solution to produce submicron suspensions of water-insoluble drugs

Stable suspensions of submicron particles of cyclosporine, a water-insoluble drug, have been produced by rapid expansion from supercritical to aqueous solution (RESAS). To minimize growth of the cyclosporine particles, which would otherwise occur in the free jet expansion, the solution was sprayed into an aqueous Tween-80 (Polysorbate-80) solution. Steric stabilization by the surfactant impedes particle growth and agglomeration. The particles were an order of magnitude smaller than those produced by RESS into air without the surfactant solution. Concentrations as high as 38 mg/mL for 400-700 nm particles were achieved in a 5.0% (w/w) Tween-80 solution.

Autonomic perspiration in 3D-printed hydrogel actuators

In both biological and engineered systems, functioning at peak power output for prolonged periods of time requires thermoregulation. Here, we report a soft hydrogel-based actuator that can maintain stable body temperatures via autonomic perspiration. Using multimaterial stereolithography, we three-dimensionally print finger-like fluidic elastomer actuators having a poly-N-isopropylacrylamide (PNIPAm) body capped with a microporous (~200 micrometers) polyacrylamide (PAAm) dorsal layer. The chemomechanical response of these hydrogel materials is such that, at low temperatures (<30°C), the pores are sufficiently closed to allow for pressurization and actuation, whereas at elevated temperatures (>30°C), the pores dilate to enable localized perspiration in the hydraulic actuator. Such sweating actuators exhibit a 600% enhancement in cooling rate (i.e., 39.1°C minute^-1) over similar non-sweating devices. Combining multiple finger actuators into a single device yields soft robotic grippers capable of both mechanically and thermally manipulating various heated objects. The measured thermoregulatory performance of these sweating actuators (~107 watts kilogram^-1) greatly exceeds the evaporative cooling capacity found in the best animal systems (~35 watts kilogram^-1) at the cost of a temporary decrease in actuation efficiency.

Repellent and insecticidal activities of essential oils from Artemisia princeps and Cinnamomum camphora and their effect on seed germination of wheat and broad bean

Repellent and insecticidal activities of essential oils extracted from leaves of Artemisia princeps Pamp and seeds of Cinnamomum camphora (L.) Presl. against storage pests Sitophillus oryzae L. and Bruchus rugimanus Bohem were investigated. Results showed that the two individual oils displayed good, but their mixture (1:1) exhibited much better repellent activities at concentrations from 250 to 1000 microg g(-1) and insecticidal actions at concentrations 1000 microg g(-1) against the test beetles S. oryzae and B. rugimanus. Oils from A. princeps and C. camphora applied individually were significantly toxic to seed germination of wheat at 500 microg ml(-1). However, no toxic effects were found when the two oils were mixed (1:1 w/w) at the same concentration. These observations indicated that the mixture of the two plant-derived oils had a synergic effect and could be used in the control of storage pests.

Interaction of coumarin derivatives with human serum albumin: investigation by fluorescence spectroscopic technique and modeling studies

Interactions of several 7-aminocoumarins with human serum albumin (HSA) were studied by using fluorescence spectroscopic technique and modeling studies. There is a large change in fluorescence spectral parameters like intensity, emission maxima and anisotropy for all aminocoumarins. There were two binding sites for cou-1, 311 and a single binding site for other coumarins. The binding constant(s) are large for all coumarins reflective of a strong binding. These spectral studies show that structural variants at the third, fourth and seventh position affects binding. The probable location of these coumarins in domain II has been predicted based on modeling. The effect of structural modification on the efficiency of binding was obtained for various other coumarins, using modeling.

In vitro antitumour and antibacterial studies of some Pt(IV) dithiocarbamate complexes

A few Pt(IV) complexes of the type [Pt(L)(2)Cl(2)] [where L=morpholine dithiocarbamate (L(1)), aniline dithiocarbamate (L(2)), N-(methyl, cyclohexyl) dithiocarbamate (L(3)) and N-(ethyl, cyclohexyl) dithiocarbamate (L(4))] were synthesized. The complexes have been characterized by elemental analysis, molar conductance, IR, electronic, (1)H and (13)C NMR spectroscopic studies. The ligands found to act in monobasic bidentate fashion. Cyclicvoltammetric studies, antibacterial and in vitro antitumour studies were also carried out.

Hairpin RNA-mediated strategies for silencing of tomato leaf curl virus AC1 and AC4 genes for effective resistance in plants

RNA interference (RNAi) using short interfering RNAs (siRNAs) has been widely explored for the suppression of intracellular viral target mRNAs. On the basis of our previous work with stable silencing of Tomato leaf curl virus, in vivo by the antisense replicase gene (AC1) of the virus and characterizing AC4, as a small RNA regulator, besides its role in pathogenicity, we used four different plasmid vector-based siRNA generation strategies to silence viral genes (AC1 and AC4) of tomato leaf curl viruses. The RNAi target sequence were chosen from DNA A of the Tomato leaf curl virus (ToLCV) on the basis of conserved regions in AC1 with an overlapping sequences of the AC4 gene. Different hairpin RNA-mediated strategies like antisense, self-complementary inverted repeats, intron-spliced hairpin RNAs, and small hairpin RNAs were deployed for efficient and predictable resistance to the viruses. Here we present that appropriately designed siRNAs not only prevents RNAi suppression but also help in developing trait-stable transgenics. These strategies imply that ToLCV rep-driven RNAi, targeting AC4 and conserved viral sequences, provides a promising approach to suppress a wide spectrum ToLCV infection in the tomato.

Synthesis and DNA binding studies of Ni(II), Co(II), Cu(II) and Zn(II) metal complexes of N1,N5-bis[pyridine-2-methylene]-thiocarbohydrazone Schiff-base ligand

The thiocarbohydrazone Schiff-base ligand with a nitrogen and sulphur donor was synthesized through condensation of pyridine-2-carbaldehyde and thiocarbohydrazide. Schiff-base ligands have the ability to conjugate with metal salts. A series of metal complexes with a general formula [MCl2(H2L)]·nH2O (MNi, Co, Cu and Zn) were synthesized by forming complexes of the N1,N5-bis[pyridine-2-methylene]-thiocarbohydrazone (H2L) Schiff-base ligand. These metal complexes and ligand were characterized by using ultraviolet-visible (UV-Vis), Fourier Transform Infrared (FT-IR), 1H and 13C NMR spectroscopy and mass spectroscopy, physicochemical characterization, CHNS and conductivity. The biological activity of the synthesized ligand was investigated by using Escherichia coli DNA as target. The DNA interaction of the synthesized ligand and complexes on E. coli plasmid DNA was investigated in the aqueous medium by UV-Vis spectroscopy and the binding constant (Kb) was calculated. The DNA binding studies showed that the metal complexes had an improved interaction due to trans-geometrical isomers of the complexes than ligand isomers in cis-positions.

Histopathologic changes in ascending aorta and risk factors related to histopathologic conditions and aortic dilatation in patients with tetralogy of Fallot

OBJECTIVE

The purposes of this study were to evaluate the histologic characteristics of the aortic wall and the risk factors related to histopathology and aortic dilatation in patients undergoing intracardiac repair of tetralogy of Fallot.

METHODS

Operatively excised full-thickness aortic wall tissue from 98 consecutive patients undergoing intracardiac repair of tetralogy of Fallot aged 6 months to 47 years (mean 104.5 +/- 102.8 months; median 72 months) were studied by light microscopy. The receiver operating characteristic curve analysis was done to quantify the diagnostic accuracy of loss of lamellar counts and multiple logistic regression models.

RESULTS

Twenty-five (25.5%) aortic tissue specimens were indicated as histologically normal and were used as normal controls. The incidence of elastic fragmentation, increased ground substance, medionecrosis, smooth muscle disarray, and fibrosis was 74.5%, 54%, 39.8%, 26.5%, and 57.1%, respectively. A lamellar count of less than 60 was associated with a sensitivity of 80% and a specificity of 87.67%. Area under the receiver operating characteristic curve indicated that 93.37% (standard error +/- 0.039) of the time the value of lamellar count was lower for the abnormal histopathology group than for the normal group (P < .001). The risk of aortic dilatation was 15.97 times higher in patients with histopathologically abnormal aorta.

CONCLUSIONS

The majority of aortic media of the ascending aorta in cyanotic tetralogy of Fallot indicates significant loss of lamellar units and pre-existing intrinsic aortopathy. The changes are present since infancy and are more pronounced in older patients subjected to long-standing cyanosis and volume overload and may account for or may coexist with the higher incidence of aortic dilatation encountered in these patients.

Fungitoxicity of essential oils against dermatophytes

Sixteen essential oils were screened in vitro for their fungitoxicity against the two dermatophytes Trichophyton rubrum and Microsporum gypseum. Five oils (from Artemisia nelagrica, Caesulia axillaris, Chenopodium ambrosioides, Cymbopogon citratus and Mentha arvensis) showed strong activity and were assessed for their fungitoxicity against eight other dermatophytes as well as against Aspergillus fumigatus and Cladosporium trichoides. These five essential oils by formulation of ointments were able to cure experimental ringworm in guinea pigs within 7 to 12 days. Artemisia oil was found to be the most effective essential oil.

Hybridization of Zinc Oxide Tetrapods for Selective Gas Sensing Applications

In this work, the exceptionally improved sensing capability of highly porous three-dimensional (3-D) hybrid ceramic networks toward reducing gases is demonstrated for the first time. The 3-D hybrid ceramic networks are based on doped metal oxides (Me_xO_y and Zn_xMe_1-xO_y, Me = Fe, Cu, Al) and alloyed zinc oxide tetrapods (ZnO-T) forming numerous junctions and heterojunctions. A change in morphology of the samples and formation of different complex microstructures is achieved by mixing the metallic (Fe, Cu, Al) microparticles with ZnO-T grown by the flame transport synthesis (FTS) in different weight ratios (ZnO-T:Me, e.g., 20:1) followed by subsequent thermal annealing in air. The gas sensing studies reveal the possibility to control and change/tune the selectivity of the materials, depending on the elemental content ratio and the type of added metal oxide in the 3-D ZnO-T hybrid networks. While pristine ZnO-T networks showed a good response to H₂ gas, a change/tune in selectivity to ethanol vapor with a decrease in optimal operating temperature was observed in the networks hybridized with Fe-oxide and Cu-oxide. In the case of hybridization with ZnAl₂O₄, an improvement of H₂ gas response (to ∼7.5) was reached at lower doping concentrations (20:1), whereas the increase in concentration of ZnAl₂O₄ (ZnO-T:Al, 10:1), the selectivity changes to methane CH₄ gas (response is about 28). Selectivity tuning to different gases is attributed to the catalytic properties of the metal oxides after hybridization, while the gas sensitivity improvement is mainly associated with additional modulation of the electrical resistance by the built-in potential barriers between n-n and n-p heterojunctions, during adsorption and desorption of gaseous species. Density functional theory based calculations provided the mechanistic insights into the interactions between different hybrid networks and gas molecules to support the experimentally observed results. The studied networked materials and sensor structures performances would provide particular advantages in the field of fundamental research, applied physics studies, and industrial and ecological applications.

Synthesis and pharmacological study of novel pyrido-quinazolone analogues as anti-fungal, antibacterial, and anticancer agents

A versatile method for novel pyrido-quinazolones was described here and tested for anti-fungal, antibacterial, and anticancerous activities. These synthesized compounds were characterized on the basis of spectroscopic techniques and evaluated for specific radiopharmaceuticals. Preliminary radiolabeling results with (99m)Tc and biological evaluation studies showed promising results for further evaluation in vivo. The efficiency of labeling was more than 98% and complexes were stable for about 18 h at 25 degrees C in the presence of serum.

Total synchronous fluorescence scan spectra of petroleum products

Extending the two-dimensional synchronous fluorescence scan to a three-dimensional total synchronous fluorescence scan (TSFS) spectral measurement gives the total synchronous fluorescence characteristics of a multifluorophoric sample at various possible wavelength intervals (Deltalambda), which could help to characterize multifluorophoric systems better. TSFS spectra of petroleum products such as diesel, kerosene, petrol, engine oil etc., available in the Indian market, are reported. Fluorescence in these samples is due to the presence of polycyclic aromatic hydrocarbons (PAHs) of various ring sizes. The TSFS contour plot profiles of the neat samples measured at right-angle geometry is a result of various energy-degrading photophysical processes such as inner filter effect, light attenuation, resonance energy transfer, collisional quenching etc. TSFS plots make it easy to obtain the optimized Deltalambda of an unknown sample of analytical interest. TSFS and the excitation-emission matrix (EEM) techniques are similar, but the contour profiles generated are different. The response of the TSFS contour profiles to dilution is different from that in the EEM contour profiles. Thus, TSFS can provide an alternative way of presenting the fluorescence response of concentrated multifluorophoric samples.

Efficacy of chitosan microspheres for controlled intra-articular delivery of celecoxib in inflamed joints

The use of polymeric carriers in formulations of therapeutic drug delivery systems has gained widespread application, due to their advantage of being biodegradable and biocompatible. In this study, we aimed to prepare celecoxib-loaded chitosan microspheres for intra-articular administration and to compare the retention of the celecoxib solution and chitosan microspheres in the joint cavity. The microspheres were characterized for entrapment efficiency, particle size and surface morphology by scanning electron microscopy. In-vitro drug release studies of microspheres revealed that the microspheres are able to control the release of celecoxib over a period of 96 h. Biodistribution studies of celecoxib and chitosan microspheres were performed by radiolabelling with 99mTc and injecting intra-articularly in rats. The study indicated that following intra-articular administration the distribution of the drug to the organs, like liver and spleen, is very rapid compared with that of the microspheres. Compared with the drug solution, a 10-fold increase in the concentration of the drug in the joint was observed 24 h post intra-articular injection (P &lt; 0.005) when drug was encapsulated in microspheres.

Celecoxib incorporated chitosan microspheres: in vitro and in vivo evaluation

Recently, considerable interest has been focussed on the use of biodegradable polymers for specialized applications such as controlled release of drug formulations; meanwhile, microsphere drug delivery systems using various kinds of biodegradable polymers have been studied extensively during the past two decades. In the present investigation, it was aimed to prepare microsphere formulations of celecoxib using a natural polymer, chitosan as a carrier for intra-articular administration to extend the retention of the drug in the knee joint. Microsphere formulations were evaluated in vitro for particle size, entrapment efficiency, surface morphology and in vitro drug release. For in vivo studies, (99m)Technetium- labeled glutathione was used as a radiopharmaceutical to demonstrate arthritic lesions by gamma scintigraphy. Evaluation of arthritic lesions post therapy in rats showed a significant difference (P < 0.005) in the group treated with celecoxib solution compared to the group treated with celecoxib loaded chitosan microspheres.