Improved tribological properties, thermal and colloidal stability of poly-α-olefins based lubricants with hydrophobic MoS2 submicron additives

HYPOTHESIS

Newtonian liquids, usually used as base oil lubricants, exhibit low viscosity under extreme thermal conditions, needed for the functioning of wind turbines. This is directly affecting the colloidal stability and the tribological properties of the formulations containing additives, such as MoS₂. Here, it was hypothesized that the surface hydrophobization of MoS₂ particles will allow for an increased colloidal stability of the resulting formulations, for temperatures as high as 80 °C.

EXPERIMENTS

The antifriction properties and the thermal stability of the designed formulations were determined on submicron MoS₂ particles dispersed in poly-α-olefins (PAO) base oils of different dynamic viscosities (from 32 to 1650 mPa·s at 25 °C). The submicron particles of MoS₂ (300-500 nm in diameter) were synthesised by a simple one-pot solvothermal method under mild conditions. The resulting particles were hydrophobized in situ in PAO base oils using alkyltrichlorosilane grafting agents with two chain lengths (C8 and C18).

FINDINGS

The covalent grafting of alkylsilanes through Mo-O-Si bonds was confirmed by DFT calculations and FT-IR measurements. Turbiscan optical analysis revealed that thermal and colloidal stabilities can be significantly improved depending on oil viscosity and chain length of the grafting agent. The formulations in the PAO65 oil remained highly stable (TSI < 1), even at 80 °C. Herein, we demonstrate the impact of hydrophobization degree on the tribological properties of the lubricants, which, importantly, could reach ultra-low friction coefficients, less than 0.02.

Core–shell alginate@silica microparticles encapsulating probiotics

Lactobacillus rhamnosus GG (LGG) was encapsulated in core–shell alginate–silica microcapsules by coating the electrosprayed ionogel with a silica shell via hydrolysis/condensation of alkoxysilane precursors.

Imprinting isolated single iron atoms onto mesoporous silica by templating with metallosurfactants

HYPOTHESIS

One of the main drawbacks of metal-supported materials, traditionally prepared by the impregnation of metal salts onto pre-synthesized porous supports, is the formation of large and unevenly dispersed particles. Generally, the larger are the particles, the lower is the number of catalytic sites. Maximum atom exposure can be reached within single-atom materials, which appear therefore as the next generation of porous catalysts.

EXPERIMENTS

Herein, we designed single iron atom-supported silica materials through sol-gel hydrothermal treatment using mixtures of a non-ionic surfactant (Pluronic P123) and a metallosurfactant (cetyltrimethylammoniumtrichloromonobromoferrate, CTAF) as porogens. The ratio between the Pluronic P123 and the CTAF enables to control the silica structural and textural properties. More importantly, CTAF acts as an iron source, which amount could be simply tuned by varying the non-ionic/metallo surfactants molar ratio.

FINDINGS

The fine distribution of iron atoms onto the silica mesopores results from the iron distribution within the mixed micelles, which serve as templates for the polymerization of the silica matrix. Several characterization methods were used to determine the structural and textural properties of the silica material (XRD, N₂ sorption isotherms and TEM) and the homogeneous distribution and lack of clustering of iron atoms in the resulting materials (elemental analysis, magnetic measurements, pair distribution function (PDF), MAS-NMR and TEM mapping). The oxidation and spin state of single-iron atoms determined from their magnetic properties were confirmed by DFT calculations. This strategy might find straightforward applications in preparing versatile single atom catalysts, with improved efficiency compared to nanosized ones.

Regulation of adhesion behavior of murine macrophage using supported lipid membranes displaying tunable mannose domains

Highly uniform, strongly correlated domains of synthetically designed lipids can be incorporated into supported lipid membranes. The systematic characterization of membranes displaying a variety of domains revealed that the equilibrium size of domains significantly depends on the length of fluorocarbon chains, which can be quantitatively interpreted within the framework of an equivalent dipole model. A mono-dispersive, narrow size distribution of the domains enables us to treat the inter-domain correlations as two-dimensional colloidal crystallization and calculate the potentials of mean force. The obtained results demonstrated that both size and inter-domain correlation can precisely be controlled by the molecular structures. By coupling α-D-mannose to lipid head groups, we studied the adhesion behavior of the murine macrophage (J774A.1) on supported membranes. Specific adhesion and spreading of macrophages showed a clear dependence on the density of functional lipids. The obtained results suggest that such synthetic lipid domains can be used as a defined platform to study how cells sense the size and distribution of functional molecules during adhesion and spreading.

Tailored jeffamine molecular tools for ordering mesoporous silica

Herein, we report the formation of organized mesoporous silica materials prepared from a novel nonionic gemini surfactant, myristoyl-end-capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). The behavior of the modified Jeffamine in water was first investigated. A direct micellar phase (L(1)) and a hexagonal (H(1)) liquid crystal were found. The structure of the micelles was investigated from the SAXS and the analysis by generalized indirect Fourier transformation, which show that the particles are globular of core-shell type. The myristoyl chains, located at the ends of the amphiphile molecule, are assembled to form the core of the micelles and, as a consequence, the molecules are folded over on themselves. Mesoporous materials were then synthesized from the self-assembly mechanism. The recovered materials were characterized by SAXS measurements, nitrogen adsorption-desorption analysis, and transmission and scanning electron microscopy. The results clearly evidence that by modifying the synthesis parameters, such as the surfactant/silica precursor molar ratio and the hydrothermal conditions, one can control the size and the nanostructuring of the resulting material. It was observed that, the lower the temperature of the hydrothermal treatment, the better the mesopore ordering.

A multicenter cross-sectional study of episiotomy practice in Romania

RATIONALE, AIMS, AND OBJECTIVES

The aim of this study was to focus attention on episiotomy practice in Romanian maternity units in order to identify factors associated with the very high rate of the procedure in Romania and to consider strategies to reduce it.

METHODS

In this clustered cross-sectional study, a total of 11 863 patients were recorded in eight Romanian maternity units to assess the prevalence of episiotomy. A random effects Poisson model was used to estimate the prevalence rate in univariate and multivariate models.

RESULTS

Among the 11 863 patients included for analysis, 8475 (71.4%) had an episiotomy. The prevalence of episiotomy was 92.7% for the first vaginal birth, 73.2% for the second vaginal birth, and 35% for the third vaginal birth. The overall rate of suturing was higher than the episiotomy rate for all patients (total rate 79.2%). The likelihood of exiting the maternity ward with an intact perineum after the first vaginal birth was less than 5% at the first vaginal birth.

CONCLUSIONS

In conclusion, routine episiotomy is the norm in Romanian maternity units, with episiotomy rates among the highest in Europe. Episiotomy use is mainly driven by local professional norms, experiences, previous training, and practitioners' decisions rather than evidence, guidelines, or variations in patient needs at the time of vaginal birth.

In situ follow-up of hybrid alginate-silicate microbeads formation by linear rheology

Hybrid alginate-silicate microbeads of about 10-20 μm were synthesized by combining alginate crosslinking, silica condensation in a one pot approach using a food grade emulsion as template. A fine tuning of the formulation composition (alginate, silica and calcium sources) is necessary in order to obtain core-shell microbeads instead of unshaped and irregular fragments or even perforated spherical beads. Importantly, in situ linear rheology provides insights into the reaction mechanism as a result of the rheological fingerprint profile obtained during beads formation.