CT-based comparison of porcine, ovine, and human pulmonary arterial morphometry

To facilitate pre-clinical animal and in-silico clinical trials for implantable pulmonary artery pressure sensors, understanding the respective species pulmonary arteries (PA) anatomy is important. Thus, morphological parameters describing PA of pigs and sheep, which are common animal models, were compared with humans. Retrospective computed tomography data of 41 domestic pigs (82.6 ± 18.8 kg), 14 sheep (49.1 ± 6.9 kg), and 49 patients (76.8 ± 18.2 kg) were used for reconstruction of the subject-specific PA anatomy. 3D surface geometries including main, left, and right PA as well as LPA and RPA side branches were manually reconstructed. Then, specific geometric parameters (length, diameters, taper, bifurcation angle, curvature, and cross-section enlargement) affecting device implantation and post-interventional device effect and efficacy were automatically calculated. For both animal models, significant differences to the human anatomy for most geometric parameters were found, even though the respective parameters' distributions also featured relevant overlap. Out of the two animal models, sheep seem to be better suitable for a preclinical study when considering only PA morphology. Reconstructed geometries are provided as open data for future studies. These findings support planning of preclinical studies and will help to evaluate the results of animal trials.

Real-world EGFR testing practices for non-small-cell lung cancer by thoracic pathology laboratories across Europe

BACKGROUND

Testing for epidermal growth factor receptor (EGFR) mutations is an essential recommendation in guidelines for metastatic non-squamous non-small-cell lung cancer, and is considered mandatory in European countries. However, in practice, challenges are often faced when carrying out routine biomarker testing, including access to testing, inadequate tissue samples and long turnaround times (TATs).

MATERIALS AND METHODS

To evaluate the real-world EGFR testing practices of European pathology laboratories, an online survey was set up and validated by the Pulmonary Pathology Working Group of the European Society of Pathology and distributed to 64 expert testing laboratories. The retrospective survey focussed on laboratory organisation and daily EGFR testing practice of pathologists and molecular biologists between 2018 and 2021.

RESULTS

TATs varied greatly both between and within countries. These discrepancies may be partly due to reflex testing practices, as 20.8% of laboratories carried out EGFR testing only at the request of the clinician. Many laboratories across Europe still favour single-test sequencing as a primary method of EGFR mutation identification; 32.7% indicated that they only used targeted techniques and 45.1% used single-gene testing followed by next-generation sequencing (NGS), depending on the case. Reported testing rates were consistent over time with no significant decrease in the number of EGFR tests carried out in 2020, despite the increased pressure faced by testing facilities during the COVID-19 pandemic. ISO 15189 accreditation was reported by 42.0% of molecular biology laboratories for single-test sequencing, and by 42.3% for NGS. 92.5% of laboratories indicated they regularly participate in an external quality assessment scheme.

CONCLUSIONS

These results highlight the strong heterogeneity of EGFR testing that still occurs within thoracic pathology and molecular biology laboratories across Europe. Even among expert testing facilities there is variability in testing capabilities, TAT, reflex testing practice and laboratory accreditation, stressing the need to harmonise reimbursement technologies and decision-making algorithms in Europe.

In-silico enhanced animal study of pulmonary artery pressure sensors: assessing hemodynamics using computational fluid dynamics

To assess whether in-silico models can be used to predict the risk of thrombus formation in pulmonary artery pressure sensors (PAPS), a chronic animal study using pigs was conducted. Computed tomography (CT) data was acquired before and immediately after implantation, as well as one and three months after the implantation. Devices were implanted into 10 pigs, each one in the left and right pulmonary artery (PA), to reduce the required number of animal experiments. The implantation procedure aimed at facilitating optimal and non-optimal positioning of the devices to increase chances of thrombus formation. Eight devices were positioned non-optimally. Three devices were positioned in the main PA instead of the left and right PA. Pre-interventional PA geometries were reconstructed from the respective CT images, and the devices were virtually implanted at the exact sites and orientations indicated by the follow-up CT after one month. Transient intra-arterial hemodynamics were calculated using computational fluid dynamics. Volume flow rates were modelled specifically matching the animals body weights. Wall shear stresses (WSS) and oscillatory shear indices (OSI) before and after device implantation were compared. Simulations revealed no relevant changes in any investigated hemodynamic parameters due to device implantation. Even in cases, where devices were implanted in a non-optimal manner, no marked differences in hemodynamic parameters compared to devices implanted in an optimal position were found. Before implantation time and surface-averaged WSS was 2.35 ± 0.47  Pa, whereas OSI was 0.08 ± 0.17 , respectively. Areas affected by low WSS magnitudes were 2.5 ± 2.7  cm2 , whereas the areas affected by high OSI were 18.1 ± 6.3  cm2 . After device implantation, WSS and OSI were 2.45 ± 0.49  Pa and 0.08 ± 0.16 , respectively. Surface areas affected by low WSS and high OSI were 2.9 ± 2.7  cm2 , and 18.4 ± 6.1  cm2 , respectively. This in-silico study indicates that no clinically relevant differences in intra-arterial hemodynamics are occurring after device implantation, even at non-optimal positioning of the sensor. Simultaneously, no embolic events were observed, suggesting that the risk for thrombus formation after device implantation is low and independent of the sensor position.

Impact of concentration, temperature and pH on the virucidal activity of alcohols against human adenovirus

BACKGROUND

Adenoviruses belong to the stable nonenveloped viruses playing an important role in healthcare-associated infections mainly causing respiratory infections and epidemic keratoconjunctivitis. Hand disinfection with alcoholic preparations is therefore one of the most important measures to prevent such viral infections in hospitals and other medical settings.

METHODS

The inactivation of adenovirus type 5 by ethanol, 1- and 2-propanol, and 2 commercially available hand disinfectants was examined at different concentrations, temperatures, and pH-values.

RESULTS

For ethanol and 1-propanol the maximum virus-inactivating properties after 30 seconds exposure were found at a concentration of 60%-70% and 50%-60%, respectively, whereas with 2-propanol no activity was observed. The virucidal activity of all alcohols and the 2 hand disinfectants examined was increased when raising the temperature from 20°C to 25°C. By increasing the pH value to 9, a strong improvement of the activity of ethanol, 1-propanol and 1 hand disinfectant was observed, whereas pH lowering resulted in decrease of activity.

CONCLUSIONS

These results demonstrate the importance of physical parameters in the inactivation of adenoviruses by alcohols and will help to improve measures to reduce adenovirus transmission in healthcare settings.

Optimizing the structure of interdisciplinary tumor boards for effective cancer care

Introduction

Multi-professional interdisciplinary tumor boards (ITB) are essential institutions to discuss all newly diagnosed, relapsed or complex cancer patients in a team of specialists to find an optimal cancer care plan for each individual patient with regard to national and international clinical practice guidelines, patient´s preference and comorbidities. In a high-volume cancer center, entity-specific ITBs take place at least once a week discussing a large number of patients. To a high level of expertise and dedication, this also requires an enormous amount of time for physicians, cancer specialists and administrative support colleagues, especially for radiologists, pathologists, medical oncologists and radiation oncologists, who must attend all cancer-specific boards according to certification requirements.

Methods

In this 15-month prospective German single-center analysis, we examined the established structures of 12 different cancer-specific ITBs at the certified Oncology Center and demonstrate tools helping to optimize processes before, during and after the boards for optimal, time-saving procedures.

Results

By changing pathways, introducing revised registration protocols and new digital supports we could show that the workload of preparation by radiologists and pathologists could be reduced significantly by 22.9% (p=<0.0001) and 52.7% (p=<0.0001), respectively. Furthermore, two questions were added to all registration forms about the patient´s need for specialized palliative care support that should lead to more awareness and early integration of specialized help.

Discussion

There are several ways to reduce the workload of all ITB team members while maintaining high quality recommendations and adherence to national and international guidelines.

Bacteriophages and related endolysins for reduction of microorganisms in the human body - a systematic review

Background: In recent years, resistance to antibiotics has become a global threat, and alternatives to antibiotics have become an area of research. The main alternative methods are briefly described in this review. However, the main focus is bacteriophage-related therapy. Bacteriophages are viruses which, due to the production of the enzyme endolysin, are able to kill bacterial host cells. Bacteriophage therapies have a long tradition. Their potential to function as antibiotics lies in their bactericidal activity and specificity in killing bacteria without infecting or affecting eukaryotic cells. Objective: To systematically review the outcomes of bacteriophage therapy in patients with bacterial infections. Methods: The MEDLINE, EMBASE, Web of Science and CENTRAL databases were searched electronically using search terms referring to bacteriophages, endolysins and antimicrobial resistance. After the literature was screened for their titles and abstracts, full-text reviews considering inclusion/exclusion criteria were performed. Data concerning patients with bacterial infections, treatment with either bacteriophages or its enzyme endolysin and their outcomes were extracted and analysed. Results: Thirteen publications were identified that met all inclusion criteria. Data extraction shows that bacteriophages or endolysins have the potential to combat bacterial infections and significantly reduce inflammatory mediators. However, 3 out of 4 randomized controlled trials revealed that there was no significant difference between phage/endolysin treated patients and control group. Significant clinical improvements were seen in cohort and case studies. A few minor side effects were reported. Conclusions: Although there are countries in which bacteriophages are prescribed as an alternative to established antibiotics, this valuable experience has yet to be examined sufficiently in clinical trials conducted to modern standards. Despite improvements in symptoms shown in the reviewed clinical trials, the infection and the bacteria themselves were rarely completely eradicated. Therefore, no definite answer can be given as to effectiveness, and further clinical trials are necessary.

Philosophy of the Deed. “Praxis” in Hegel and Posthegelian Discourses

In his Prolegomena to Historiosophy, published in 1838, August von Cieszkowski wrote that we are at the turning point in history, when facts turn into deeds. This raises the question of what is actually to be understood by the term “deed” [Tat] and why, the hour of the deed should have come precisely now. After focusing on Hegel’s concept of a history of freedom, I will present two models of understanding action and conclude by discussing their consequences. More specifically, I will undertake a search that will lead us – by way of a detour via Hegel’s Phenomenology of Spirit – to Fichte’s concept of the act of doing. That socio-political practice can be justified in this way, however, is denied by those who argue that society and politics in Hegel fall under the category of objective and not of absolute spirit. The alternative model of action that I will focus on, concerns action in relation to objects, or labour, a model that Hegel had already worked out in Jena, and that Marx will re-discover (rather than invent) and further develop.

Biofilm reduction potential of 0.02% polyhexanide irrigation solution in several types of urethral catheters

Background

Long-term use of urethral catheters is associated with high risk of urinary tract infection (UTI) and blockage. Microbial biofilms are a common cause of catheter blockage, reducing their lifetime and significantly increasing morbidity of UTIs. A 0.02% polyhexanide irrigation solution developed for routine mechanical rinsing shows potential for bacterial decolonization of urethral catheters and has the potential to reduce or prevent biofilm formation.

Methods

Using an in vitro assay with standard market-leading types of catheters artificially contaminated with clinically relevant bacteria, assays were carried out to evaluate the biofilm reduction and prevention potential of a 0.02% polyhexanide solution versus no intervention (standard approach) and irrigation with saline solution (NaCl 0.9%). The efficiency of decolonization was measured through microbial plate count and membrane filtration.

Results

Irrigation using a 0.02% polyhexanide solution is suitable for the decolonization of a variety of transurethral catheters. The effect observed is significant compared to irrigation with 0.9% saline solution (p = 0.002) or no treatment (p = 0.011). No significant difference was found between irrigation with 0.9% saline solution and no treatment (p = 0.74).

Conclusions

A 0.02% polyhexanide solution is able to reduce bacterial biofilm from catheters artificially contaminated with clinically relevant bacteria in vitro. The data shows a reduction of the viability of thick bacterial biofilms in a variety of commercially available urinary catheters made from silicone, latex-free silicone, hydrogel-coated silicone and PVC. Further research is required to evaluate the long-term tolerability and efficacy of polyhexanide in clinical practice.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12894-021-00826-3.

Decolonization potential of 0.02% polyhexanide irrigation solution in urethral catheters under practice-like in vitro conditions

Background

Long-term use of indwelling urethral catheters is associated with high risk of urinary tract infection (UTI) and blockage, which may in turn cause significant morbidity and reduce the life of the catheter. A 0.02% polyhexanide irrigation solution has been developed for routine mechanical rinsing together with bacterial decolonization of suprapubic and indwelling urethral catheters.

Methods

Using a practice-like in vitro assay and standard silicon catheters, artificially contaminated with clinically relevant bacteria, experiments were carried out to evaluate the bacterial decolonization potential of polyhexanide vs. 1) no intervention (standard approach) and 2) irrigation with a saline (NaCl 0.9%) solution. Swabbing and irrigation was used to extract the bacteria.

Results

Irrigation with polyhexanide reduced the microbial population vs. the control catheters by a factor of 1.64 log₁₀ (swab extraction) and by a factor of 2.56 log₁₀ (membrane filtration). The difference in mean microbial counts between the two groups (0.90) was statistically significant in favor of polyhexanide when the liquid extraction method was used (p = 0.034). The difference between the two groups using the swab extraction method did not reach statistical significance.

Conclusions

The saline and polyhexanide solutions are able to reduce bacterial load of catheters, which shows a combined mechanical and antimicrobial effect. Further research is required to evaluate the long-term tolerability and efficacy of polyhexanide in clinical practice.

Chlorhexidine is not an essential component in alcohol-based surgical hand preparation: a comparative study of two handrubs based on a modified EN 12791 test protocol

BACKGROUND

Surgical hand preparation is an essential part of modern surgery. Both alcohol-based and antiseptic detergent-based hand preparation are recommended practices, with a trend towards use of alcohol based handrubs. However, discussion has arisen whether chlorhexidine is a required ingredient in highly efficacious alcohol-based formulations, in view of providing sustained antimicrobial efficacy.

METHODS

One alcohol-only formulation (product A), containing ethanol and n-propanol, and one formulation containing a chlorhexidine-ethanol combination (product B) were directly compared with each other using a modified test protocol based on European standard EN 12791 (2016) with 25 volunteers. The alcohol-only formulation (product A) was applied for only 90 s, the chlorhexidine-alcohol formulation (product B) for 180 s. Microbial log reduction factors were determined and statistically compared immediately after application and at 6 h under surgical gloves.

RESULTS

The alcohol-only formulation (product A) achieved mean log reduction factors of 1.96 ± 1.06 immediately after application and 1.67 ± 0.71 after 6 h. The chlorhexidine-alcohol combination (product B) achieved mean log reduction factors of 1.42 ± 0.79 and 1.24 ± 0.90 immediately and after 6 h, respectively. The values for product A were significantly greater than those for product B at both measured time points (p ≤ 0.025 immediately after application and p ≤ 0.01 after 6 h).

CONCLUSIONS

An optimized alcohol-only formulation tested according to a modified EN 12791 protocol in 25 healthy volunteers outperformed a chlorhexidine-alcohol formulation both immediately after application and at 6 h under surgical gloves, despite a much shorter application time. Thus, optimized alcohol-only formulations do not require chlorhexidine to achieve potent immediate and sustained efficacy. In conclusion, chlorhexidine is not an essential component for alcohol-based surgical hand preparation.

[Respiratory epithelial adenomatoid hamartoma of the nose and nasal sinuses : a rare differential diagnosis of nasal polyposis]

INTRODUCTION

Hamartomas are benign tumor-like lesions resulting from incorrectly differentiated germplasm and can manifest in different organ systems. In the nasal cavity and the sinuses these lesions are rare. Only few data on etiology, epidemiology and clinical significance of these tumors exist to date.

MATERIALS AND METHODS

In a retrospective study, material from patients treated in the Clinic for Otorhinolaryngology, Head and Neck Surgery of the Ulm Military Hospital was screened on the incidence and clinical courses of respiratory epithelial adenomatoid hamartomas (REAH) of the nose and nasal cavity. Furthermore, for cases of REAH, formalin-fixated paraffin-embedded tissue samples were re-evaluated and examined for human papillomavirus (HPV) DNA by PCR.

RESULTS

Tissue samples from 8145 surgical interventions on the nose and nasal sinuses from 2003 to 2012 were included. A total of 22 patients (3 female, 19 male; median age 57.5 years) diagnosed with REAH could be identified. Major complaints were nasal blockage (91 %), sinusitis (82 %), rhinorrhea (36 %) and cephalgia (23 %). Nasal endoscopy showed polyps in 68 % of patients. Native nasal sinus CT scans revealed no indications of REAH. Intraoperatively, hamartomas were found in 12 patients originating from the ethmoid bone, in 8 from the middle meatus or infundibulum and in 2 from the olfactory cleft. Macroscopic and histological examination showed compact lesions sized between 4 and 25 mm in the largest diameter containing homologous tissue, without signs of dysplasia or malignancy. HPV DNA was not identified in any case.

CONCLUSION

REAH of the nasal cavity and sinuses are rare benign local tissue lesions, usually without any autonomous proliferation. Clinical signs and findings correspond to those in polypoid pansinusitis. Only with single-sided or olfactory cleft location might CT scans provide indication of a tumorous lesion. For differentiation from true neoplasms, surgical resection and histopathological clarification is indicated. On the basis of current knowledge, complete surgical resection is adequate therapy.

Ultrasound-based testing of tendon mechanical properties: a critical evaluation

In the past 20 years, the use of ultrasound-based methods has become a standard approach to measure tendon mechanical properties in vivo. Yet the multitude of methodological approaches adopted by various research groups probably contribute to the large variability of reported values. The technique of obtaining and relating tendon deformation to tensile force in vivo has been applied differently, depending on practical constraints or scientific points of view. Divergence can be seen in 1) methodological considerations, such as the choice of anatomical features to scan and to track, force measurements, or signal synchronization; and 2) in physiological considerations related to the viscoelastic behavior or length measurements of tendons. Hence, the purpose of the present review is to assess and discuss the physiological and technical aspects connected to in vivo testing of tendon mechanical properties. In doing so, our aim is to provide the reader with a qualitative analysis of ultrasound-based techniques. Finally, a list of recommendations is proposed for a number of selected issues.

Conventional housing conditions attenuate the development of experimental autoimmune encephalomyelitis

BACKGROUND

The etiology of multiple sclerosis (MS) has remained unclear, but a causative contribution of factors outside the central nervous system (CNS) is conceivable. It was recently suggested that gut bacteria trigger the activation of CNS-reactive T cells and the development of demyelinative disease.

METHODS

C57BL/6 (B6) mice were kept either under specific pathogen free or conventional housing conditions, immunized with the myelin basic protein (MBP)-proteolipid protein (PLP) fusion protein MP4 and the development of EAE was clinically monitored. The germinal center size of the Peyer's patches was determined by immunohistochemistry in addition to the level of total IgG secretion which was assessed by ELISPOT. ELISPOT assays were also used to measure MP4-specific T cell and B cell responses in the Peyer's patches and the spleen. Ear swelling assays were performed to determine the extent of delayed-type hypersensitivity reactions in specific pathogen free and conventionally housed mice.

RESULTS

In B6 mice that were actively immunized with MP4 and kept under conventional housing conditions clinical disease was significantly attenuated compared to specific pathogen free mice. Conventionally housed mice displayed increased levels of IgG secretion in the Peyer's patches, while the germinal center formation in the gut and the MP4-specific TH17 response in the spleen were diminished after immunization. Accordingly, these mice displayed an attenuated delayed type hypersensitivity (DTH) reaction in ear swelling assays.

CONCLUSIONS

The data corroborate the notion that housing conditions play a substantial role in the induction of murine EAE and suggest that the presence of gut bacteria might be associated with a decreased immune response to antigens of lower affinity. This concept could be of importance for MS and calls for caution when considering the therapeutic approach to treat patients with antibiotics.

Seated double-poling ergometer performance of individuals with spinal cord injury - a new ergometer concept for standardized upper body exercise

This study aimed to evaluate biomechanics during seated double-poling exercises in individuals with spinal cord injury (SCI) and to compare these with those of able-bodied persons (AB). 26 participants volunteered for the study; 13 with SCI (injury levels C7-T12), and 13 AB. A seated double-poling ergometer (SDPE) was developed. 3-dimensional kinematics was measured and piezoelectric force sensors were used to register force in both poles for calculation of power during incremental intensities. Significantly lower power outputs, (143.2 ± 51.1 vs. 198.3 ± 74.9 W) and pole forces (137.1 ± 43.1 vs. 238.2 ± 81.2 N) were observed during maximal effort in SCI compared to AB. Sagittal upper trunk range of motion increased with intensity and ranged from 6.1-34.8° for SCI, and 6.9-31.3° for AB, with larger peak amplitudes in flexion for AB (31.4 ± 12.9°) compared to SCI (10.0 ± 8.0°). All subjects with SCI were able to exercise on the SDPE. Upper body kinematics, power and force outputs increased with intensity in both groups, but were in general, lower in SCI. In conclusion, the SDPE could be successfully used at low to high work intensities enabling both endurance and strength training for individuals with SCI.

Importance of realistic LVAD profiles for assisted aortic simulations: evaluation of optimal outflow anastomosis locations

Left ventricular assist devices (LVADs) are carefully designed, but the significance of the implantation configuration and interaction with the vasculature is complex and not fully determined. The present study employs computational fluid dynamics to investigate the importance of applying a realistic LVAD profile when evaluating assisted aortic flow fields and subsequently compares a number of potential anastomosis locations in a patient-specific aortic geometry. The outflow profile of the Berlin Heart INCOR® device was provided by Berlin Heart GmbH (Berlin, Germany) and the cannula was attached at a number of locations on the aorta. Simulations were conducted to compare a flat profile against the real LVAD profile. The results illustrate the importance of applying an LVAD profile. It not only affects the magnitude and distribution of oscillatory shear index, but also the distribution of flow to the great arteries. The ascending aorta was identified as the optimal location for the anastomosis.

Relative movements between the tibia and femur induced by external plantar shocks are controlled by muscle forces in vivo

The purpose of this study was to investigate the role of muscle activation on the relative motion between tibia and femur. Impacts were initiated under the heels of four volunteers in three different activation levels of muscles crossing the extended knee joint: 0%, 30% and 60% of previously performed maximal voluntary isometric contractions. Impact forces were measured and tibial and femoral accelerations and displacements were determined by means of accelerometry. The accelerometers were mounted on the protruding ends of intracortical pins, inserted into the distal aspect of the femur and proximal aspect of the tibia. Under the 0%-condition the impact force (475±64N) led to 2.3±1.2mm knee compression and to 2.4±1.9mm medio-lateral and 4.4±1.1mm antero-posterior shear. The impact forces increased significantly with higher activation levels (619±33N (30%), 643±147N (60%)), while the knee compression (1.5±1.2, 1.4±1.3mm) and both medio-lateral shear (1.8±1.4, 1.5±1.1mm) and antero-posterior shear (2.6±1.3, 1.5±1.1mm) were significantly reduced. This study indicated that muscles are effective in controlling the relative motion between tibia and femur when the knee is subjected to external forces.

Computational modelling and evaluation of cardiovascular response under pulsatile impeller pump support

This study presents a numerical simulation of cardiovascular response in the heart failure condition under the support of a Berlin Heart INCOR impeller pump-type ventricular assist device (VAD). The model is implemented using the CellML modelling language. To investigate the potential of using the Berlin Heart INCOR impeller pump to produce physiologically meaningful arterial pulse pressure within the various physiological constraints, a series of VAD-assisted cardiovascular cases are studied, in which the pulsation ratio and the phase shift of the VAD motion profile are systematically changed to observe the cardiovascular responses in each of the studied cases. An optimization process is proposed, including the introduction of a cost function to balance the importance of the characteristic cardiovascular variables. Based on this cost function it is found that a pulsation ratio of 0.35 combined with a phase shift of 200° produces the optimal cardiovascular response, giving rise to a maximal arterial pulse pressure of 12.6 mm Hg without inducing regurgitant pump flow while keeping other characteristic cardiovascular variables within appropriate physiological ranges.

Conjugation of fluorescent proteins with DNA oligonucleotides

This work describes the synthesis of covalent ssDNA conjugates of six fluorescent proteins, ECFP, EGFP, E(2)GFP, mDsRed, Dronpa, and mCherry, which were cloned with an accessible C-terminal cystein residue to enable site-selective coupling using a heterobispecific cross-linker. The resulting conjugates revealed similar fluorescence emission intensity to the unconjugated proteins, and the functionality of the tethered oligonucleotide was proven by specific Watson-Crick base pairing to cDNA-modified gold nanoparticles. Fluorescence spectroscopy analysis indicated that the fluorescence of the FP is quenched by the gold particle, and the extent of quenching varied with the intrinsic spectroscopic properties of FP as well as with the configuration of surface attachment. Since this study demonstrates that biological fluorophores can be selectively incorporated into and optically coupled with nanoparticle-based devices, applications in DNA-based nanofabrication can be foreseen.

Computed tomography analysis of radiostereometric data to determine flexion axes after total joint replacement: application to the elbow joint

Kinematic analysis for in vivo assessment of elbow endoprostheses requires knowledge of the exact positions of motion axes relative to bony landmarks or the prosthesis. A prosthesis-based reference system is required for comparison between individuals and studies. The primary aim of this study was to further develop an earlier described algorithm for fusion of radiostereometric analysis (RSA) data and data obtained in 3D computed tomography (CT) for application to the elbow after total joint replacement. The secondary aim was to propose a method for marking of prostheses in 3D CT, enabling definition of a prosthesis-based reference system. Six patients with elbow endoprostheses were investigated. The fusion of data made it possible to visualize the motion axes in relation to the prostheses in the 3D CT volume. The differences between two repeated positioning repetitions of the longitudinal prosthesis axis were less than 0.6 degrees in the frontal and sagittal planes. Corresponding values for the transverse axis were less than 0.6 degrees in the frontal and less than 1.4 degrees (in four out of six less than 0.6 degrees ) in the horizontal plane. This study shows that by fusion of CT and RSA data it is possible to determine the accurate position of the flexion axes of the elbow joint after total joint replacement in vivo. The proposed method for implant marking and registration of reference axes enables comparison of prosthesis function between patients and studies.

Physiological control of a rotary blood pump with selectable therapeutic options: control of pulsatility gradient

A control strategy for rotary blood pumps meeting different user-selectable control objectives is proposed: maximum support with the highest feasible flow rate versus medium support with maximum ventricular washout and controlled opening of the aortic valve (AoV). A pulsatility index (PI) is calculated from the pressure difference, which is deduced from the axial thrust measured by the magnetic bearing of the pump. The gradient of PI with respect to pump speed (GPI) is estimated via online system identification. The outer loop of a cascaded controller regulates GPI to a reference value satisfying the selected control objective. The inner loop controls the PI to a reference value set by the outer loop. Adverse pumping states such as suction and regurgitation can be detected on the basis of the GPI estimates and corrected by the controller. A lumped-parameter computer model of the assisted circulation was used to simulate variations of ventricular contractility, pulmonary venous pressure, and aortic pressure. The performance of the outer control loop was demonstrated by transitions between the two control modes. Fast reaction of the inner loop was tested by stepwise reduction of venous return. For maximum support, a low PI was maintained without inducing ventricular collapse. For maximum washout, the pump worked at a high PI in the transition region between the opening and the permanently closed AoV. The cascaded control of GPI and PI is able to meet different control objectives and is worth testing in vitro and in vivo.

Invasive in vivo measurement of rear-, mid- and forefoot motion during walking

The aim of this work was to use bone anchored external markers to describe the kinematics of the tibia, fibula, talus, calcaneus, navicular, cuboid, medial cuneiform, first and fifth metatarsals during gait. Data were collected from six subjects. There was motion at all the joints studied. Movement between the talus and the tibia showed the expected predominance of sagittal plane motion, but the talocalcaneal joint displayed greater variability than expected in its motion. Movement at the talonavicular joint was greater than at the talocalcaneal joint and motion between the medial cuneiform and navicular was far greater than expected. Motion between the first metatarsal and the medial cuneiform was less than motion between the fifth metatarsal and cuboid. Overall the data demonstrated the complexity of the foot and the importance of the joints distal to the rearfoot in its overall dynamic function.

A five-year radiostereometric follow-up of the Birmingham Hip Resurfacing arthroplasty

The early designs of hip resurfacing implants suffered high rates of early failure, making it impossible to obtain valuable mid-term radiostereophotogrammetric (RSA) results. The metal-on-metal Birmingham Hip Resurfacing arthroplasty has shown promising mid-term results and we present here the first mid-term RSA analysis of a hip resurfacing implant. The analysis was performed in 19 hips at five years post-operatively. The mean acetabular component translation and rotation, and femoral component translation were compared with the previous RSA measurements at two and six months, and one and two years. There was no statistical significance (t-test, p < or = 0.05) between these consecutive movements, indicating the mid-term stability of the implant.

Transdermal resorption of an ethanol- and 2-propanol-containing skin disinfectant

BACKGROUND AND AIMS

Ethanol- or 2-propanol-containing disinfectant agents are widely used in medical practice, particularly in the surgical environment. It was the primary objective of this phase I study to comparatively investigate the transdermal resorption of ethanol and 2-propanol within 1 h after dermal application of the two agents as single preparations and a commercial product containing both alcohols in combination, respectively. The secondary objective was to examine whether a mutual influence of the two alcohols in combination exists.

MATERIALS AND METHODS

Following the double-blind, randomized, three-times cross-over design for this clinical trial, 20 ml of three different alcohol-containing disinfectants were applied on a 200-cm(2) gauze swab on skin areas, identical in size and location, of 14 healthy volunteers for 10 min to investigate the absorption rate of ethanol and 2-propanol with special focus on the question whether the two alcohols might influence each other's absorption rate when being applied in combination.

RESULTS

No clinically relevant enhancement of dermal absorption, with respect to ethanol and 2-propanol, could be observed within 1 h after application, neither when used as single preparations, nor in combination.

CONCLUSION

Therefore, the use of ethanol- and 2-propanol-containing disinfectants in the medical environment can be considered as safe.

Intrinsic foot kinematics measured in vivo during the stance phase of slow running

An accurate kinematic description of the intrinsic articulations of the foot during running has not previously been presented, primarily due to methodological limitations. An invasive method based upon reflective marker arrays mounted on intracortical pins drilled into the bones was used in this study. Four male volunteers participated as subjects. Pins (1.6mm diameter) were inserted under local anaesthetic in the tibia, fibula, calcaneus, talus, navicular, cuboid, medial cuneiform and metatarsals I and V. A 10 camera motion analysis system was used for kinematic data capture and the ground reaction force was simultaneously measured. Segment motion relative to adjacent proximal segments was determined using helical axes projected into the coordinate system of the proximal segment. Coefficients of multiple correlation calculated to determine the strength of association between running style with and without the pins inserted indicated that the subjects had little restriction due to the inserted pins. Individual and mean results were presented for rotations defined in the planes of the proximal segment's coordinate system and showed frontal plane rotation of the talocrural joint (12.2+/-7.1 degrees ), which exceeded that of the subtalar joint (8.9+/-3.2 degrees ). Considerable mobility of the talonavicular joint was found (6.5+/-2.9 degrees , 13.5+/-4.1 degrees and 8.7+/-1.4 degrees in the sagittal, frontal and transverse planes, respectively). Furthermore, little, but non-negligible motion between the fibula and tibia was found (3.3+/-2.4 degrees in the sagittal plane). The presented data are of interest as input for future biomechanical modelling and clinical decision making in particular, concerning joint fusion.

Foot kinematics during walking measured using bone and surface mounted markers

The aim was to compare kinematic data from an experimental foot model comprising four segments ((i) heel, (ii) navicular/cuboid (iii) medial forefoot, (iv) lateral forefoot), to the kinematics of the individual bones comprising each segment. The foot model was represented using two different marker attachment protocols: (a) markers attached directly to the skin; (b) markers attached to rigid plates mounted on the skin. Bone data were collected for the tibia, talus, calcaneus, navicular, cuboid, medial cuneiform and first and fifth metatarsals (n=6). Based on the mean differences between the three data sets during stance, the differences between any two of the three kinematic protocols (i.e. bone vs skin, bone vs plate, skin vs plate) were >3 degrees in only 35% of the data and >5 degrees in only 3.5% of the data. However, the maximum difference between any two of the three protocols during stance was >3 degrees in 100% of the data, >5 degrees in 73% of the data and >8 degrees in 23% of the data. Differences were greatest for motion of the combined navicular/cuboid relative to the calcaneus and the medial forefoot segment relative to the navicular/cuboid. The differences between the data from the skin and plate protocols were consistently smaller than differences between either protocol and the kinematic data for each bone comprising the segment. The pattern of differences between skin and plate protocols and the actual bone motion showed no systematic pattern. It is unlikely that one rigid body foot model and marker attachment approach is always preferable over another.

A single-molecule Förster resonance energy transfer analysis of fluorescent DNA-protein conjugates for nanobiotechnology

The development of nanobiotechnological devices requires the ability to build various components with nanometer accuracy. DNA is a well-established nanoscale building block that self assembles due to specific interactions that are encoded in its sequence. Recently, it has become possible to couple proteins to DNA, thereby expanding the capabilities of DNA for use with molecular photonics and bioelectronics. Here, we present the design and characterization of a supramolecular Förster resonance energy transfer (FRET) system by using a fluorescent protein bound to single-stranded DNA (ssDNA), a fluorophore attached to a second ssDNA molecule, and a complementary strand for hybridizing the two fluorophores together. The FRET efficiency was studied by using both ensemble and single-pair FRET measurements. The distance between the two fluorophores was determined from the single-pair FRET efficiency and could be described by a simple cylindrical model for the DNA. Hence, DNA can be used as a scaffold for positioning fluorescent proteins, as well as traditional fluorophores, with nanometer accuracy and shows great potential for use in the future of nanobiotechnology.

Fusion of radiostereometric analysis data into computed tomography space: application to the elbow joint

Improvement of joint prostheses is dependent upon information concerning the biomechanical properties of the joint. Radiostereometric analysis (RSA) and electromagnetic techniques have been applied in previous cadaver and in vivo studies on the elbow joint to provide valuable information concerning joint motion axes. However, such information is limited to mathematically calculated positions of the axes according to an orthogonal coordinate system and is difficult to relate to individual skeletal anatomy. The aim of this study was to evaluate the in vivo application of a new fusion method to provide three-dimensional (3D) visualization of flexion axes according to bony landmarks. In vivo RSA data of the elbow joint's flexion axes was combined with data obtained by 3D computed tomography (CT). Results were obtained from five healthy subjects after one was excluded due to an instable RSA marker. The median error between imported and transformed RSA marker coordinates and those obtained in the CT volume was 0.22 mm. Median maximal rotation error after transformation of the rigid RSA body to the CT volume was 0.003 degrees . Points of interception with a plane calculated in the RSA orthogonal coordinate system were imported into the CT volume, facilitating the 3D visualization of the flexion axes. This study demonstrates a successful fusion of RSA and CT data, without significant loss of RSA accuracy. The method could be used for relating individual motion axes to a 3D representation of relevant joint anatomy, thus providing important information for clinical applications such as the development of joint prostheses.

Calculation of dose coefficients for radionuclides produced in a spallation neutron source utilizing NUBASE and the evaluated nuclear structure data file databases

Based on a mercury spallation neutron source target, the UNLV Transmutation Research Program has identified 72 radionuclides with a half-life greater than or equal to a minute as lacking an appropriate reference for a published dose coefficient according to existing radiation safety dose coefficient databases. A method was developed to compare the nuclear data presented in the ENSDF and NUBASE databases for these 72 radionuclides. Due to conflicting or lacking nuclear data in one or more of the databases, internal and external dose coefficient values have been calculated for only 14 radionuclides, which are not currently presented in Federal Guidance Reports Nos. 11, 12, and 13 or Publications 68 and 72 of the International Commission on Radiological Protection. Internal dose coefficient values are reported for inhalation and ingestion of 1 microm and 5 microm AMAD particulates along with the f1 values and absorption types for the adult worker. Internal dose coefficient values are also reported for inhalation and ingestion of 1 microm AMAD particulates as well as the f1 values and absorption types for members of the public. Additionally, external dose coefficient values for air submersion, exposure to contaminated ground surface, and exposure to soil contaminated to an infinite depth are also presented.

Quality assurance methods and procedures used to verify consistency in calculating dose coefficients

The development of a spallation neutron source with a mercury target will lead to the production of rare radionuclides. The dose coefficients for many of these radionuclides have not yet been published. A collaboration of universities and national labs has taken on the task of calculating dose coefficients for the rare radionuclides using the software package DCAL. The working group developed a procedure for calculating dose coefficients and a quality assurance (QA) program to verify the calculations completed. The first portion of this QA program was to verify that each participating group could independently reproduce the dose coefficients for a known set of radionuclides. The second effort was to divide the group of rare radionuclides among the independent participants in a manner that assured that each radionuclide would be redundantly and independently calculated, and the results subsequently be submitted for publication in a separate manuscript. The final aspect of this program was to resolve any discrepancies arising among the participants as a group. The output of the various software programs for six QA radionuclides, 144Nd, 201Au, 50V, 61Co, 41Ar, and 38S were compared among all members of the working group. Initially, a few differences in outputs were identified. This exercise identified weaknesses in the procedure, which has since been revised. After the revisions, dose coefficients were calculated and compared to published dose coefficients with good agreement. The present efforts involve generating dose coefficients for the rare radionuclides anticipated to be produced from the spallation neutron source should a mercury target be employed.

Exercise-induced strain and strain rate in the distal radius

Strains applied to bone can stimulate its development and adaptation. High strains and rates of strain are thought to be osteogenic, but the specific dose response relationship is not known. In vivo human strain measurements have been performed in the tibia to try to identify optimal bone strengthening exercises for this bone, but no measurements have been performed in the distal radial metaphysis, the most frequent site of osteoporotic fractures. Using a strain gauged bone staple, in vivo dorsal metaphyseal radial strains and rates of strain were measured in ten female patients during activities of daily living, standard exercises and falls on extended hands. Push-ups and falling resulted in the largest compression strains (median 1345 to 3146 με, equivalent to a 0.1345% to 0.3146% length change) and falling exercises in the largest strain rates (18 582 to 45 954 με/s). On the basis of their high strain and/or strain rates these or variations of these exercises may be appropriate for distal radial metaphyseal bone strengthening.

Stability of the Birmingham hip resurfacing arthroplasty at two years

The Birmingham hip resurfacing metal-on-metal arthroplasty was introduced in 1997 and has shown promising short- to mid-term results. We used radiostereophotogrammetric analysis (RSA) to study the stability of 20 resurfacing arthroplasties over a follow-up period of 24 months.

Radiological examinations for RSA were performed immediately after surgery and at two, six, 12 and 24 months after operation. Precision and detection of migration thresholds (non-zero movement) were calculated.

All the results corresponded well to those found in similar experimental arrangements with standard hip prostheses. Migration of the cup and vertical and mediolateral migration of the head were calculated. The values were low at two years compared with those of earlier studies of cemented femoral components in conventional total hip replacements indicating that there was no evidence of excessive early migration or loosening of the components.

Correction for sensor creep in the evaluation of long-term plantar pressure data

Plantar pressure measurements are frequently applied in the biomechanical assessment of lower extremity injury risk. Different conditions such as footwear, orthopedic insoles or movement tasks are usually compared by separate trials of the individual conditions. However, injury risk may be related to fatigue from long-term exercise and no actual measurements of plantar pressure during fatigue treatment have been published. A simple method is presented for determining sensor creep over a 3 h walking trial carrying a heavy load (49% of bodyweight). Plantar pressure measurements were conducted using Pedar insoles with capacitative sensors. Repeated standing trials were conducted and the total force underneath both feet measured under the assumption that this value should remain constant over time. The percentage fluctuation from the first such static measurement can be used to correct measured parameters of interest for the influence of sensor creep. The pressure sensor values increased by up to 17% after 3 h and the method presented permitted the correction of measured plantar pressure parameters to account for this sensor creep behaviour. Such correction appears necessary for correct interpretation of the fatigue effects on plantar loading. Creep correction as described here should be performed individually and separately in each long-term trial.

A comparison of external plantar loading and in vivo local metatarsal deformation wearing two different military boots

The introduction of the M90 boot with a more flexible outer sole to military recruits in Sweden was accompanied by an increase in second metatarsal stress fractures. This study compared the new boot with the previous, stiffer model. A combination of external plantar pressure measurement (two subjects) and an in vivo measurement of dorsal metatarsal strain (six subjects) using strain gauge instrumented staples was implemented. Walking in both boot models resulted in increased plantar pressure under the heads of the lesser metatarsals and generally decreased loading under the remainder of the foot. Dorsal metatarsal tension increased for subjects wearing the new boot throughout a walking protocol.