Wireless bipolar electrode-based textile electrofluidics: towards novel micro-total-analysis systems

Point of care testing using micro-total-analysis systems (μTAS) is critical to emergent healthcare devices with rapid and robust responses. However, two major barriers to the success of this approach are the prohibitive cost of microchip fabrication and poor sensitivity due to small sample volumes in a microfluidic format. Here, we aimed to replace the complex microchip format with a low-cost textile substrate with inherently built microchannels using the fibers' spaces. Secondly, by integrating this textile-based microfluidics with electrophoresis and wireless bipolar electrochemistry, we can significantly improve solute detection by focusing and concentrating the analytes of interest. Herein, we demonstrated that an in situ metal electrode simply inserted inside the textile-based electrophoretic system can act as a wireless bipolar electrode (BPE) that generates localized electric field and pH gradients adjacent to the BPE and extended along the length of the textile construct. As a result, charged analytes were not only separated electrophoretically but also focused where their electrophoretic migration and counter flow (EOF) balances due to redox reactions proceeding at the BPE edges. The developed wireless redox focusing technique on textile constructs was shown to achieve a 242-fold enrichment of anionically charged solute over an extended time of 3000 s. These findings suggest a simple route that achieves separation and analyte focusing on low-cost surface-accessible inverted substrates, which is far simpler than the more complex ITP on conventional closed and inaccessible capillary channels.

Reference Phantom Method for Ultrasonic Imaging of Thin Dynamic Constructs

Quantitative ultrasound has a great potential for the non-destructive evaluation of tissue engineered constructs, where the local attenuation and the integrated backscatter coefficient (IBC) can be used for monitoring the development of biological processes. The local determination of both parameters can be achieved using the reference phantom method (RPM). However, its accuracy can be affected when evaluating constructs of evolving sound speed, attenuation and thickness, for example, when evaluating biodegradable hydrogels developing neocartilage. To assess the feasibility of using the RPM under such dynamic conditions while employing a 50-MHz transducer, we conducted a series of experiments on 3-mm-thick acellular hydrogels laden with microspheres. The ultrasonic evaluation procedure used was validated by detecting and compensating for large attenuation variations occurring in the construct, up to 20-fold with respect to the reference phantom, with estimations errors below 1%. We found that sound speed mismatch does not affect the local attenuation estimation, but causes a strong diffraction effect by reducing the backscatter intensity. Such intensity reduction was compensated by determining the IBC percentage change (IBC_Δ) as function of sound speed mismatch with respect to the reference phantom (ΔSS), with the equation IBC_Δ = (0.63 ± 0.07) ΔSS + (8.54 ± 0.76) 10^-3 ΔSS². The investigated ΔSS interval was up to 120 m/s and using two different concentrations of microspheres, with estimation errors below 7% relative to the construct's actual IBC. Finally, we found that the spectral difference method is sufficient to measure within a few millimetres in depth mismatch, and when combining with sound speed mismatch, we found negligible additional effects. These results pave the way for the use of a generic reference phantom for the evaluation of thin dynamic constructs, thus simplifying the need for using different phantoms depending on the construct's properties.

DLL3 expression in large cell neuroendocrine carcinoma (LCNEC) and association with molecular subtypes and neuroendocrine profile

OBJECTIVES

For stage IV pulmonary large cell neuroendocrine carcinoma (LCNEC), the only therapeutic option is palliative chemotherapy. DLL3 is a new therapeutic target, which seems to be often expressed in SCLC and LCNEC. It has recently been reported that DLL3 mRNA expression is particularly upregulated in the LCNEC subgroup with STK11/KEAP1 and TP53 co-mutations, in contrast to lower expression levels in RB1 and TP53 co-mutated LCNEC. Our aim was to investigate DLL3 protein expression in stage IV LCNEC and correlate data with mutational profiles (i.e.STK11/KEAP1/RB1), immunostaining results (pRb, NE markers) and clinical characteristics.

MATERIALS AND METHODS

Immunohistochemical analysis for DLL3 (SC16.65) and ASCL1 (SC72.201) was performed on 94 and 51 FFPE tissue sections, respectively, of pathologically reviewed stage IV LCNEC. DLL3 and ASCL1 were scored positive if ≥1% of the tumor cells showed cytoplasmic/membranous or dotlike (DLL3) or nuclear (ASCL1) immunostaining. Data were correlated with available sequencing (TP53, RB1, STK11, KEAP1), immunostaining (pRb, NE markers) and clinical data.

RESULTS

DLL3 was expressed in 70/94 (74%) LCNEC, 56 (80%) of which showed cytoplasmic/membranous staining. Median H-score was 55 (interquartile range 0-160). DLL3 staining was not different in pRb immunohistochemistry negative and positive patients (DLL3+ in 53/70 (76%) vs. 14/21 (67%), p = 0.409) or RB1 mutated and wildtype patients (DLL3+ in 27/34 (79%) vs. 23/33 (70%), p = 0.361). Nevertheless, 6/6 (100%) STK11 mutated, 10/11 (91%) KEAP1 mutated and 9/9 (100%) TP53 wildtype tumors were DLL3+ . Furthermore, DLL3 expression was associated with expression of ASCL1 and at least 2 out of 3 neuroendocrine markers.

CONCLUSION

The high percentage (74%) of DLL3 expression in stage IV LCNEC denotes the potential of DLL3 targeted therapy in this patient group.

Quantitative ultrasound imaging of cell-laden hydrogels and printed constructs

In the present work we have revisited the application of quantitative ultrasound imaging (QUI) to cellular hydrogels, by using the reference phantom method (RPM) in combination with a local attenuation compensation algorithm. The investigated biological samples consisted of cell-laden collagen hydrogels with PC12 neural cells. These cell-laden hydrogels were used to calibrate the integrated backscattering coefficient (IBC) as a function of cell density, which was then used to generate parametric images of local cell density. The image resolution used for QUI and its impact on the relative IBC error was also investigated. Another important contribution of our work was the monitoring of PC12 cell proliferation. The cell number estimates obtained via the calibrated IBC compared well with data obtained using a conventional quantitative method, the MTS assay. Evaluation of spectral changes as a function of culture time also provided additional information on the cell cluster size, which was found to be in close agreement with that observed by microscopy. Last but not least, we also applied QUI on a 3D printed cellular construct in order to illustrate its capabilities for the evaluation of bioprinted structures. STATEMENT OF SIGNIFICANCE: While there is intensive research in the areas of polymer science, biology, and 3D bio-printing, there exists a gap in available characterisation tools for the non-destructive inspection of biological constructs in the three-dimensional domain, on the macroscopic scale, and with fast data acquisition times. Quantitative ultrasound imaging is a suitable characterization technique for providing essential information on the development of tissue engineered constructs. These results provide a detailed and comprehensive guide on the capabilities and limitations of the technique.

A contactless approach for monitoring the mechanical properties of swollen hydrogels

Using a customized ultrasound setup we investigate the feasibility of using a contactless approach to study the bulk mechanical properties of swollen hydrogels. The study involved two different hydrogels, gelatin methacrylate (GelMa) and green algae extract methacrylate (GAEM), which were prepared to provide materials with varying modulus and different swelling properties. Two approaches have been developed. In the first case, ultrasound was compared to Young's modulus measured by indentation. It was found that can be linearly related to indentation modulus values only when the hydrogel swelling ratio is taken into account. In the second approach, an exponential dependency between swelled thickness and indentation modulus was found. This is representative for each hydrogel and purification method in addition to being independent of the conditions used within the toughness range explored. The results of this study indicate that a simple thickness measurement via the proposed approach can provide a direct relationship to Young's modulus upon calibration.

Quantitative characterisation of conductive fibers by capacitive coupling

The application of a capacitively coupled contactless conductivity sensor for the quantitative characterization of conductive fibers.

Characterisation of graphene fibres and graphene coated fibres using capacitively coupled contactless conductivity detector

The use of capacitively coupled contactless conductivity detection (C⁴D) for the characterisation of thin conductive graphene fibres, graphene composite fibres, and graphene coated fibrous materials is demonstrated for the first time.