Selective and Cooperative Photocycloadditions within Multistranded Aromatic Sheets

A series of aromatic helix-sheet-helix oligoamide foldamers composed of several different photosensitive diazaanthracene units have been designed and synthesized. Molecular objects up to 7 kDa were straightforwardly produced on a 100 mg scale. Nuclear magnetic resonance and crystallographic investigations revealed that helix-sheet-helix architectures can adopt one or two distinct conformations. Sequences composed of an even number of turn units were found to fold in a canonical symmetrical conformation with two helices of identical handedness stacked above and below the sheet segment. Sequences composed of an odd number of turns revealed a coexistence between a canonical fold with helices of opposite handedness and an alternate fold with a twist within the sheet and two helices of identical handedness. The proportions between these species could be manipulated, in some cases quantitatively, being dependent on solvent, temperature, and absolute control of helix handedness. Diazaanthracene units were shown to display distinct reactivity toward [4 + 4] photocycloadditions according to the substituent in position 9. Their organization within the sequences was programmed to allow photoreactions to take place in a specific order. Reaction pathways and kinetics were deciphered and product characterized, demonstrating the possibility to orchestrate successive photoreactions so as to avoid orphan units or to deliberately produce orphan units at precise locations. Strong cooperative effects were observed in which the photoreaction rate was influenced by the presence (or absence) of photoadducts in the structure. Multiple photoreactions within the aromatic sheet eventually lead to structure lengthening and stiffening, locking conformational equilibria. Photoproducts could be thermally reverted.

Light- and pH-regulated Water-soluble Pseudorotaxanes Comprising a Cucurbit[7]uril and a Flavylium-based Axle

A linear double pyridinium-terminated thread comprising a central chalcone moiety is shown to provide two independent binding sites with similar affinity for cucurbit[7]uril (CB7) macrocycles in water as judged from NMR, UV-Visible and fluorescence spectroscopies. Association results in [2] and [3]pseudorotaxanes, which are both pH and photosensitive. Switching from the neutral chalcone to the cationic flavylium form upon irradiation at 365 nm under acidic conditions provided an enhanced CB7 association (K_1:1 increases from 1.2×10⁵  M^-1 to 1.5×10⁸  M^-1 ), limiting spontaneous on-thread cucurbituril shuttling. This co-conformational change in the [2]pseudorotaxane is reversible in the dark with k_obs =4.1×10^-4  s^-1 . Threading the flavylium moiety into CB7 leads to a dramatic increase in the fluorescence quantum yield, from 0.29 in the free axle to 0.97 in the [2]pseudorotaxane and 1.0 in the [3]pseudorotaxane.

Heat Engine Drives Transport of an FeII 4 L4 Cage and Cargo

The directed motion of species against a chemical potential gradient is a fundamental feature of living systems, underpinning processes that range from transport through cell membranes to neurotransmission. The development of artificial active cargo transport could enable new modes of chemical purification and pumping. Here, a heat engine is described that drives chemical cargo between liquid phases to generate a concentration gradient. The heat engine, composed of a functionalized Fe^II ₄ L₄ coordination cage, is grafted with oligoethylene glycol imidazolium chains. These chains undergo a conformational change upon heating, causing the cage and its cargo to reversibly transfer between aqueous and organic phases. Furthermore, sectional heating and cooling allow for the cage to traverse multiple phase boundaries, allowing for longer-distance transport than would be possible using a single pair of phases.

Coordination cages as permanently porous ionic liquids

Porous materials are widely used in industry for applications that include chemical separations and gas scrubbing. These materials are typically porous solids, although the liquid state can be easier to manipulate in industrial settings. The idea of combining the size and shape selectivity of porous domains with the fluidity of liquids is a promising one and porous liquids composed of functionalized organic cages have recently attracted attention. Here we describe an ionic-liquid, porous, tetrahedral coordination cage. Complementing the gas binding observed in other porous liquids, this material also encapsulates non-gaseous guests-shape and size selectivity was observed for a series of isomeric alcohols. Three gaseous chlorofluorocarbon guests, trichlorofluoromethane, dichlorodifluoromethane and chlorotrifluoromethane, were also shown to be taken up by the liquid coordination cage with an affinity that increased with their size. We hope that these findings will lead to the synthesis of other porous liquids whose guest-uptake properties may be tailored to fulfil specific functions.

Photoreversible stretching of a BAPTA chelator marshalling Ca2+-binding in aqueous media

Free calcium ion concentration is known to govern numerous biological processes and indeed calcium acts as an important biological secondary messenger for muscle contraction, neurotransmitter release, ion-channel gating, and exocytosis. As such, the development of molecules with the ability to instantaneously increase or diminish free calcium concentrations potentially allows greater control over certain biological functions. In order to permit remote regulation of Ca²⁺, a selective BAPTA-type synthetic receptor / host was integrated with a photoswitchable azobenzene motif, which upon photoirradiation would enhance (or diminish) the capacity to bind calcium upon acting on the conformation of the adjacent binding site, rendering it a stronger or weaker binder. Photoswitching was studied in pseudo-physiological conditions (pH 7.2, [KCl] = 100 mM) and dissociation constants for azobenzene cis- and trans-isomers have been determined (0.230 μM and 0.102 μM, respectively). Reversible photoliberation/uptake leading to a variation of free calcium concentration in solution was detected using a fluorescent Ca²⁺ chemosensor.

Aromatic oligoamide foldamers as versatile scaffolds for induced circularly polarized luminescence at adjustable wavelengths

Quinoline oligoamide foldamers appended with non-chiral fluorophores and derivatized with a camphanyl chiral inducer display strong chiroptical properties at tunable wavelengths as proved by CD and CPL spectroscopies. Induced CPL activity with high luminescence dissymmetry factors was observed in the visible range at wavelengths specific to the fluorophores.

2D and 3D surface photopatterning via laser-promoted homopolymerization of a perfluorophenyl azide-substituted BODIPY

An innovative photopatterning process is described that allows, in a single laser-promoted operation, the covalent attachment of a molecule on a surface (2D patterning - xy dimensions) and its photopolymerization to grow micro-/nanostructures with spatial control in a third z-dimension. The surface patterning process, based on nitrene reactivity, was harnessed using the highly fluorescent azide-substituted boron difluoride dipyrromethene (BODIPY) 1 that was prepared in a single synthetic step from the parent pentafluorophenyl BODIPY on reacting with NaN₃. Using the laser of a fluorescence microscope (375 nm or 532 nm) 1 could be grafted on adapted surfaces and then homopolymerised. In this study we show that using glass coverslips coated with PEG/high density alkyne groups (density of ∼1 × 10¹⁴ per cm²), the patterning process was much more spatially confined than when using PEG only coating. Varying the irradiation time (1 to 15 s) or laser power (0.14-3.53 μW) allowed variation of the amount of deposited BODIPY to afford, in the extreme case, pillars of a height up to 800 nm. AFM and MS studies revealed that the nano/microstructures were formed of particles of photopolymerized 1 having a mean diameter of ca. 30 nm. The emission spectra and fluorescence lifetimes for the patterned structures were measured, revealing a red-shift (from ∼560 nm up to 620 nm) of the maximum emission and a shortening (from ∼6 ns to 0.8 ns) of the fluorescence lifetimes in areas where the density of BODIPY is high. As an application of the patterning process, a figure formed of 136 dots/pillars was prepared. The confocal hyperspectral fluorescence image revealed that the figure is clearly resolved and constituted by highly photoluminescent red dots whose fluorescence intensities and emission color proved to be highly reproducible. SEM and AFM studies showed that the luminescent dots were pillars with a conical shape, an average height of 710 ± 28 nm and a FWHM of 400 ± 20 nm.

Optimized protocol for whole organ decellularization

BACKGROUND

The idea of tissue decellularization to gain matrices for tissue engineering is promising. The aim of the present study is to establish a safe and reproducible protocol for solid tissue decellularization that prevents the architecture of the matrix with the inherent vascular network.

METHODS

The study was performed in rat kidneys which were decellularized by a SDS-based perfusion protocol. Perfusion time and SDS concentration were systematically changed to obtain the shortest and most gentle protocol that leads to complete decellularization.

RESULTS

We investigated kinetics of protein elution, decellularization success, and remaining cell toxicity. This resulted in a reproducible protocol, leading to safe decellularization with prevention of the inherent vascular network, without remaining detectable cell toxicity. The established protocol leads to solid tissue decellularization in only 7 h, which is by far shorter than the previously published methods.

CONCLUSION

The established technique has the potential to become a relevant platform technology for tissue engineering of solid tissues. It provides a solution for the yet-unsolved problem of vascularization.

Synthetic water soluble di-/tritopic molecular receptors exhibiting Ca2+/Mg2+ exchange

Structural integration of two synthetic water soluble receptors for Ca²⁺ and Mg²⁺, namely 1,2-bis(2-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid (BAPTA) and o-aminophenol-N,N,O-triacetic acid (APTRA), respectively, gave novel di- and tritopic ionophores (1 and 2). As Mg²⁺ and Ca²⁺ cannot be simultaneously complexed by the receptors, allosteric control of complexation results. Potentiometric measurements established stepwise protonation constants and showed high affinity for Ca²⁺ (log K = 6.08 and 8.70 for 1 and 2, respectively) and an excellent selectivity over Mg²⁺ (log K = 3.70 and 5.60 for 1 and 2, respectively), which is compatible with magnesium-calcium ion exchange. While ion-exchange of a single Mg²⁺ for a single Ca²⁺ is possible in both 1 and 2, the simultaneous binding of two Mg²⁺ by 2 appears prohibitive for replacement of these two ions by a single Ca²⁺. Ion-binding and exchange was further rationalized by DFT calculations.

A blue 4',7-diaminoflavylium cation showing an extended pH range stability

The introduction of two amine substituents in 4' and 7 positions, leads to the formation of a blue flavylium cation, 7-(N,N'-diethylamino)-2-(9-julolidine)-1-benzopyrilium, which is extremely stable across a wide acidic pH range. The kinetic and thermodynamic constants of the multistate system have been calculated by studying the relaxation kinetics after equilibrium perturbation by addition of base (direct pH jumps) or acid (reverse pH jumps). Except for the cis-chalcone, which is an elusive species, the relative energy levels of the other species could be calculated and a global energy level diagram constructed. The diagram explains that the stability of the diamino compound is due to the high energy level of the hemiketal species, which is difficult to access in acidic medium.

A prototype reversible polymersome-stabilized H2S photoejector operating under pseudophysiological conditions

Polymersome capsules are shown to solubilise photolabile hydrosulfide-containing (2), as well as hydroxylated (1), malachite green derivatives in their leuco-forms in aqueous buffer solution.

Photoswitchable azobenzene-appended iridium(iii) complexes

The use of aliphatic-bridging units to append azobenzene fragments on triscyclometalated Ir(iii) complexes permits the construction of photoswitchable organometallics.

High performance optical oxygen sensors based on iridium complexes exhibiting interchromophore energy shuttling

Reversible electronic energy transfer is used for sensing oxygen traces and results in very high sensitivity.

Water-soluble naphthalimide-based ‘Pourbaix sensors’: pH and redox-activated fluorescent AND logic gates based on photoinduced electron transfer

Naphthalimide-based ‘Pourbaix sensors’ for redox potential and pH fluoresce with a lifetime of 8.5 ns while photoinduced electron transfer occurs on a time scale of 20 ps.

Switchable platinum-based tweezers with Pt-Pt bonding and selective luminescence quenching

Molecular tweezers incorporating peripheral platinum salphen complexes and a central chelating terpyridine group have been synthesized. The terpyridine can be switched upon metal binding between a free 'W' shaped form and a coordinated 'U' form. The crystallographic structure of the zinc-closed molecular tweezers was obtained and presented a strong π-stacking between the Pt-salphen units associated with a Pt-Pt bond. The luminescence properties, notably in response to selected guest ions (Zn(2+), Pb(2+), Hg(2+)) and the resulting mechanical motion, have been investigated by UV-Vis and emission spectroscopy. While ion coordination to the terpy resulted in no significant changes in the luminescence, a selective intercalation of a second Hg(2+) associated with a large differential quenching was observed.

Photodriven [2]rotaxane–[2]catenane interconversion

The reversible photocyclomerization of terminal anthracene units enables the interconversion between [2]rotaxane and [2]catenane molecular topologies.

Copper(i)-photocatalyzed trifluoromethylation of alkenes

Using the photoreducible Cu^II precatalyst 2, trifluoromethylation of terminal alkenes can be conducted at low copper loading on exposing the reaction mixture to sunlight/ambient light.

Terpy(Pt-salphen)2 switchable luminescent molecular tweezers

The design and synthesis of switchable molecular tweezers based on a luminescent terpy(Pt-salphen)2 (1; terpy=terpyridine) complex is reported. Upon metal coordination, the tweezers can switch from an open "W"-shaped conformation to a closed "U"-shaped form that is adapted for selective recognition of cations. Closing of the tweezers by metal coordination (M=Zn(2+), Cu(2+), Pb(2+), Fe(2+), Hg(2+)) was monitored by (1)H NMR and/or UV/Vis titrations. During the titration, exclusive formation of the 1:1 complex [M(1)] was observed, without appearance of an intermediate 1:2 complex [M(1)2]. The crystallographic structure of the 1:1 complex was obtained with Pb(2+) and showed a distorted helical structure. Selective intercalation of Hg(2+) cations by the closed "U" form was observed. The tweezers were reopened by selective metal decoordination of the terpyridine ligand by using tris(2-aminoethyl)amine (tren) as a competitive ligand without modification of the Pt-salphen complex. Detailed photophysical studies were performed on the open and closed tweezers. Structured emission was observed in the open form from the Pt-salphen moieties, with a high quantum yield and a long lifetime. The emission is slightly modified upon closing with 1 equivalent of Zn(2+) or Hg(2+), whereas a dramatic quenching was obtained upon intercalation of additional Hg(2+).

Bone marrow-derived cell mobilization by G-CSF to enhance osseointegration of bone substitute in high tibial osteotomy

PURPOSE

To evaluate granulocyte colony-stimulating factor (G-CSF) efficacy in accelerating bone regeneration following opening-wedge high tibial valgus osteotomy for genu varum.

METHODS

A phase II trial was conducted for evaluating the preoperative administration of G-CSF given at 10 μg/kg/day for 3 consecutive days with an additional half-dose 4 h before the opening-wedge high tibial valgus osteotomy. Overall, 12 patients (Group A) received G-CSF treatment, and the subsequent 12 patients (Group B) underwent surgery without G-CSF. The osteotomy gap was filled by a bone graft substitute. Bone marrow cell (BMC) mobilization was monitored by CD34+ve cell and clonogenic progenitor cell analysis. All patients underwent a clinical (Lysholm Knee Scale and SF-36) and radiographic evaluation preoperatively, as well as at given intervals postsurgery.

RESULTS

All patients completed the treatment program without major side effects; G-CSF was well tolerated. BMC mobilization occurred in all Group A patients, with median peak values of circulating CD34+ve cells of 110/μL (range 29-256). Circulating clonogenic progenitors paralleled CD34+ve cell levels. A significant improvement in Lysholm Knee Scale was recorded at follow-up in Group A compared to Group B. At the radiographic evaluation, there was a significant increase in osseointegration at the bone-graft junction in Group A at 1, 2, 3 and 6 months postsurgery compared to Group B. The computerized tomography scan of the grafted area at 2 months postsurgery showed no significant difference in the quality of the newly formed bone between the two Groups.

CONCLUSIONS

Although the limited number of patients does not allow firm conclusions, the study suggests that G-CSF can be safely administered preoperatively in subjects undergoing opening-wedge high tibial valgus osteotomy; in addition, the clinical, radiographic and CT monitoring indicate that G-CSF and/or mobilized BMCs may hasten bone graft substitute osseointegration.

LEVEL OF EVIDENCE

I.