The measurement of photocathode transverse energy distribution curves (TEDCs) using the transverse energy spread spectrometer (TESS) experimental system

The minimum achievable particle beam emittance in an electron accelerator depends strongly on the intrinsic emittance of the photocathode electron source. This is measurable as the mean longitudinal and transverse energy spreads in the photoemitted electron beam (MLE and MTE respectively); consequently, MLE and MTE are notable figures of merit for photocathodes used as electron sources in particle accelerators. The overall energy spread is defined by the sum of the MTE and the MLE, and the minimization of MTE is crucial to reduce emittance and thus generate a high-brightness electron beam. Reducing the electron beam emittance in an accelerator that drives a Free-Electron Laser (FEL) delivers a significant reduction in the saturation length for an x-ray FEL, thus reducing the machine's construction footprint and operating costs while increasing the x-ray beam brightness. The ability to measure the transverse energy distribution curve of photoelectrons emitted from a photocathode is a key enabler in photocathode research and development that has prompted the Accelerator Science and Technology Centre (ASTeC) at the STFC Daresbury Laboratory to develop the Transverse Energy Spread Spectrometer to make these crucial measurements. We present details of the design for the upgraded TESS instrument with measured data for copper (100), (110), and (111) single-crystal photocathodes illuminated at UV wavelengths around 266 nm.

Measurement of the longitudinal energy distribution of electrons in low energy beams using electrostatic elements

The Transverse Energy Spread Spectrometer (TESS) was designed primarily to study the mean transverse energy spread of electrons emitted from photocathode electron sources at both room and liquid nitrogen temperatures as a function of quantum efficiency through analysis of the photoemission footprint. By reconfiguring the potentials applied to different detector elements, TESS can also be used to measure the mean longitudinal energy spread of photoemitted electrons. Initial plans were to use electrostatic wire meshes as a retarding element which prevents the detection of electrons with insufficient energy to overcome a variable potential barrier. However, this method has proved impractical and a new method has been proposed in which the photocathode bias potential is swept (effectively from a state of no electron emission to full emission) and the emitted photocurrent is then detected by using a photoemitted charge collector. In this article, we present the TESS set-up and analyze this new method to measure the longitudinal energy distribution curve. Experimental results are presented and compared to simulated results by utilising a custom designed tracking code.

Long-pulse operation at constant output power and single-frequency mode of a high-power electrostatic free-electron maser with depressed collector

The Fusion Free-Electron Maser (FFF) is the prototype of a high-power, tunable source of mm-wave radiation, for use on fusion plasma devices. In previous experiments a net output power of 730 kW at 206 GHz was generated in short pulses. The present experiment has been equipped with a system to recover the charge and energy of the spent electron beam. We present experimental results which show output of mm-wave radiation at constant power level during the full pulse length, as well as single-frequency operation; even though the cavity is highly overmoded; the latter is reached by effective suppression of spurious modes by the feedback system.

Spin-dependent electron-proton scattering in the Delta-excitation region

We report on measurements of the cross section and provide first data on spin correlation parameters A(TT') and A(TL') in inclusive scattering of longitudinally polarized electrons from nuclear-polarized hydrogen. Polarized electrons were injected into an electron storage ring operated at a beam energy of 720 MeV. Polarized hydrogen was produced by an atomic beam source and injected into an open-ended cylindrical cell, located in the electron storage ring. The four-momentum transfer squared ranged from Q2 = 0.2 GeV(2)/c(2) at the elastic scattering peak to Q2 = 0.11 GeV(2)/c(2) at the Delta(1232) resonance. The data provide a stringent test of pion electroproduction models.

Spin-momentum correlations in quasielastic electron scattering from deuterium

The spin-momentum correlation parameter A(V)(ed) was measured for the 2H-->(e-->,e'p)n reaction for missing momenta up to 350 MeV/c at Q2 = 0.21 (GeV/c)(2) for quasielastic scattering of polarized electrons from vector-polarized deuterium. The data give detailed information about the deuteron spin structure and are in good agreement with the results of microscopic calculations based on realistic nucleon-nucleon potentials and including various spin-dependent reaction mechanism effects. The experiment reveals in a most direct manner the effects of the D state in the deuteron ground-state wave function and shows the importance of isobar configurations for this reaction.