Effect of surface energy and roughness on cell adhesion and growth - facile surface modification for enhanced cell culture

In vitro, cellular processing on polymeric surfaces is fundamental to the development of biosensors, scaffolds for tissue engineering and transplantation. However, the effect of surface energy and roughness on the cell-surface interaction remains inconclusive, indicating a lack of complete understanding of the phenomenon. Here, we study the effect of surface energy (E s) and roughness ratio (r) of a polydimethylsiloxane (PDMS) substrate on cell attachment, growth, and proliferation. We considered two different cell lines, HeLa and MDA MB 231, and rough PDMS surfaces of different surface energy in the range E s = 21-100 mJ m-2, corresponding to WCA 161°-1°, and roughness ratio in the range r = 1.05-3, corresponding to roughness 5-150 nm. We find that the cell attachment process proceeds through three different stages marked by an increase in the number of attached cells with time (stage I), flattening of cells (stage II), and elongation of cells (III) on the surface. Our study reveals that moderate surface energy (E s ≈ 70 mJ m-2) and intermediate roughness ratio (r ≈ 2) constitute the most favourable conditions for efficient cell adhesion, growth, and proliferation. A theoretical model based on the minimization of the total free energy of the cell-substrate system is presented and is used to predict the spread length of cells that compares well with the corresponding experimental data within 10%. The performance and reusability of the rough PDMS surface of moderate energy and roughness prepared via facile surface modification are compared with standard T-25 cell culture plates for cell growth and proliferation, which shows that the proposed surface is an attractive choice for efficient cell culture.

Attraction and Repulsion between Liquid Droplets over a Liquid-Impregnated Surface

We show that adjacent liquid droplets exhibit long-range attraction and repulsion on an immiscible liquid impregnating a surface when either the drop or the impregnating liquid is volatile. Remarkably, we find that at small times the interaction is attractive, analogous to the "Cheerios effect", but at large times the interaction becomes repulsive depicting the "reverse-Cheerios effect". Our study reveals that the interaction is underpinned by wetting and capillarity, buoyancy, and evaporation phenomena. We experimentally observe the interaction between a pair of droplets and provide a theoretical framework to quantitatively predict their transport behavior.

Evaporation and morphological patterns of bi-dispersed colloidal droplets on hydrophilic and hydrophobic surfaces

Understanding the formation of different morphological patterns depending on the particle size and surface wettability has great relevance in the separation, mixing and concentration of micro/nano particles and biological entities. We report the evaporation and morphological patterns of evaporating bi-dispersed colloidal droplets on hydrophilic and hydrophobic surfaces. To explain the underlying mechanisms of various particle distribution patterns, we propose a phenomenological model that accounts for the drag force, van der Waals and electrostatic interaction forces, and surface tension force acting on the particles. In the case of the hydrophilic surface (θ ∼ 27°), there is a competition between the frictional force arising due to the van der Waals (∼10-8 N) and electrostatic interaction forces (∼10-10 N) and the surface tension force (∼10-7 N) that depends on the particle size. Consequently, the smaller particles (0.2 and 1.0 μm in diameter) are found to be pinned and form an outer ring at the contact line whereas the larger particles (3.0 and 6.0 μm in diameter) move inward, either forming an inner ring or flocculating depending on the particle size. Interestingly, a completely different morphological pattern of the micro/nano particles is observed on a hydrophobic substrate (θ ∼ 110°): contact line pinning is no longer observed and particles form a centralized deposition pattern. The order of the magnitude of the surface tension force is higher as compared to the frictional force (∼10-8 N); thus the particles are driven radially inward and accumulate at the center of the droplet. Owing to the mixed mode of evaporation toward the end of evaporation, only a fraction of smaller particles travel radially outward due to the coffee-ring effect. Scanning electron microscopy images reveal that smaller particles are present mostly at the center with a small fraction of smaller particles at the edge of the pattern, whereas larger particles are uniformly distributed throughout.

Facile Fabrication and Characterization of a PDMS-Derived Candle Soot Coated Stable Biocompatible Superhydrophobic and Superhemophobic Surface

We report a simple, inexpensive, rapid, and one-step method for the fabrication of a stable and biocompatible superhydrophobic and superhemophobic surface. The proposed surface comprises candle soot particles embedded in a mixture of PDMS+n-hexane serving as the base material. The mechanism responsible for the superhydrophobic behavior of the surface is explained, and the surface is characterized based on its morphology and elemental composition, wetting properties, mechanical and chemical stability, and biocompatibility. The effect of %n-hexane in PDMS, the thickness of the PDMS+n-hexane layer (in terms of spin coating speed) and sooting time on the wetting property of the surface is studied. The proposed surface exhibits nanoscale surface asperities (average roughness of 187 nm), chemical compositions of soot particles, very high water and blood repellency along with excellent mechanical and chemical stability and excellent biocompatibility against blood sample and biological cells. The water contact angle and roll-off angle is measured as 160° ± 1° and 2°, respectively, and the blood contact angle is found to be 154° ± 1°, which indicates that the surface is superhydrophobic and superhemophobic. The proposed superhydrophobic and superhemophobic surface offers significantly improved (>40%) cell viability as compared to glass and PDMS surfaces.