KI and TEDA influences towards the retention of radiotoxic CH3I by activated carbons

Activated carbons (AC) are widely used within the ventilation networks of nuclear facilities to trap volatile iodine species. In this paper, the performances of various commercial activated carbons towards the trapping of γ-labelled methyl iodide were evaluated in semi-pilot scale under different R.H. according to normalized procedures. A combination between the retention performances and the physico-chemical properties as deduced from several techniques was performed to gain insights about the AC influencing parameters on γ-CH₃I capture. Different trends were obtained depending on the impregnant nature and the studied conditions. A high sensitivity of KI/AC towards water vapor was outlined. At R.H. = 40%. The enhancement of water uptake by KI/AC as deduced from water adsorption experiments, leads to decrease the available microporosity for CH₃I physisorption, inducing therefore the reduction of performances as a function of KI content at these conditions. At R.H. = 90%, the adsorption mechanism was found to be governed by isotopic exchange reaction since 90% of the microporosity was occupied by water molecules. Therefore, a slight increase of DF was obtained in these conditions. This sensitivity was found to be of a lesser extent for TEDA/AC displaying the highest retention performances whatever the studied condition.

Effects of water vapour and temperature on the retention of radiotoxic CH3I by silver faujasite zeolites

In this work, Ag/X and Ag/Y faujasite zeolites were evaluated as candidate sorbents for the retention of methyl iodide under conditions close to those expected in a severe nuclear accident. Different categories of tests were conducted from laboratory to semi-pilot scales. First, the effects of temperature and water vapour on the CH₃I retention/decomposition mechanism were investigated under lab-scale conditions. More specifically, the CH₃I adsorption capacities and the fate of its main decomposition products (oxygenated compounds and alkanes) were measured under dynamic conditions at different temperatures (35, 100 and 250 °C). Then, the decontamination factors of Ag/X and Ag/Y silver faujasites exchanged with different silver contents were monitored according to the time on stream using a very low CH₃I concentration (1 ppmv). Finally, a parametric study was conducted at semi-pilot scale using realistic [CH₃I]/[H₂O] molar ratio ≈ 10^-6 and temperatures in the range 20-90 °C. Those experiments were helpful in order to assess the effects of some important parameters relevant to the adsorbents or operating conditions.

First in-flight synchrotron X-ray absorption and photoemission study of carbon soot nanoparticles

Many studies have been conducted on the environmental impacts of combustion generated aerosols. Due to their complex composition and morphology, their chemical reactivity is not well understood and new developments of analysis methods are needed. We report the first demonstration of in-flight X-ray based characterizations of freshly emitted soot particles, which is of paramount importance for understanding the role of one of the main anthropogenic particulate contributors to global climate change. Soot particles, produced by a burner for several air-to-fuel ratios, were injected through an aerodynamic lens, focusing them to a region where they interacted with synchrotron radiation. X-ray photoelectron spectroscopy and carbon K-edge near-edge X-ray absorption spectroscopy were performed and compared to those obtained for supported samples. A good agreement is found between these samples, although slight oxidation is observed for supported samples. Our experiments demonstrate that NEXAFS characterization of supported samples provides relevant information on soot composition, with limited effects of contamination or ageing under ambient storage conditions. The highly surface sensitive XPS experiments of airborne soot indicate that the oxidation is different at the surface as compared to the bulk probed by NEXAFS. We also report changes in soot's work function obtained at different combustion conditions.

Stability of metal–organic frameworks under gamma irradiation

We report the study of the resistance of archetypal MOFs (MILs, HKUST-1, UiO-66, and ZIF-8) under gamma irradiation.

Production of reference sources of radioactive aerosols in filters for proficiency testing

In the framework of the organization of proficiency testing, filters with deposits of ¹³⁷Cs and ⁹⁰Sr+⁹⁰Y radioactive aerosols have been submitted to laboratories for radionuclide measurement. Procedures for the special preparation and characterization of filters have been developed. The different steps of filter preparation, determination of the deposited radionuclide activity and characterization of the homogeneity of these deposits are presented. This method of filter preparation can also be used in the production of secondary standards, whose properties are more adapted to the needs of laboratories measuring radioactivity in filters than are the solid sources that they typically use.