Sex differences in left atrial volumes, mechanics and stiffness in primary mitral regurgitation- a combined 2D and 3D echocardiographic study

BACKGROUND

Mitral regurgitation (MR) causes left atrial (LA) enlargement and impaired reservoir function. We assessed whether changes in LA size, strain and stiffness in significant (moderate or greater) primary MR are sex-specific.

METHODS AND RESULTS

In the 3D Echocardiography and Cardiovascular Prognosis in Mitral Regurgitation study (3D-PRIME), 111 patients with primary MR were prospectively investigated with 2D and 3D echocardiography. MR was severe if the 3D regurgitant fraction was ≥50%. LA size was assessed by maximum, minimum and pre-A 3D volume (LAV), mechanics by peak reservoir (LASr) and contractile strain, and stiffness by the ratio: mitral peak E-wave divided by the annular e' velocity (E/e´)/LASr.Women were older, had higher heart rate, and lower body mass index and MR regurgitant volumes (p < 0.05). 3D LAV indexed for body surface area and LA contractile strain did not differ by sex, while LASr was lower (22.2% vs. 25.0%) and LA stiffness higher in women (0.56 vs. 0.44) (p < 0.05). In linear regression analysis, female sex was associated with higher LA stiffness independent of age, minimum LAV, left ventricular global longitudinal strain, diabetes and coronary artery disease (R2 0.56, all p < 0.05). In logistic regression analysis, women had a 4.0-fold (95% CI 1.2-13.1, p = 0.02) higher adjusted risk of increased LA stiffness than men.

CONCLUSION

Women with significant primary MR have more impaired LA reservoir mechanics and increased LA stiffness compared to men despite lower MR regurgitant volumes and similar indexed LA size. The findings reveal sex-specific features of LA remodeling in MR.

Retinoylserine and retinoylalanine, natural products of the moth Trichoplusia ni

Insect cells convert vitamin A into a number of retinoids that are evolutionarily conserved with those of mammalian cells. However, insect cells also produce additional natural retinoids. Namely, two retinoic acid peptides, N-trans-retinoylserine (1) and N-trans-retinoylalanine (2), have been isolated from a cell line of the common cabbage looper, Trichoplusia ni. These are the first examples of naturally occurring retinoic acid linked to amino acids through an amide bond; the amino acid moieties are depicted in the more common l-configuration, although the absolute configuration was not determined due to the minuscule sample amount.

3D interstitial HDR brachytherapy combined with 3D external beam radiotherapy and androgen deprivation for prostate cancer. Preliminary results

BACKGROUND

Evaluation of feasibility, tolerance and efficiency for a new 3D interstitial HDR brachytherapy technique combined with 3D external beam radiotherapy and androgen deprivation for prostate cancer.

PATIENTS AND METHODS

Between January 1997 and August 1998 we treated 35 patients with stage cT1-3 N0 M0 prostate cancer. Thirty-two patients with a follow-up of 12 to 28 months (median: 18 months) were evaluated. After ultrasound-guided transrectal implantation of 4 non-parallel needles, CT based 3D brachytherapy treatment planning ("Offenbach system") was performed. All patients received 4 fractions brachytherapy using a fractional dose of 5 or 7 Gy. Time between each fraction was 14 days. After brachytherapy 3D external irradiation followed up to 39.6 or 45.0 Gy. All patients received androgen deprivation, starting 2 to 19 months before brachytherapy, ending 3 months after 3D external radiotherapy.

RESULTS

Posttreatment PSA levels dropped to < 1.5 ng/ml in 29/32 patients (91%). In 25 patients PSA levels were < 0.5 ng/ml, in 4 patients 0.5 to 1.5 ng/ml. In 2 patients we noted biochemical relapse. Transrectal implantation was very well tolerated. Grade 3 acute urinary toxicity occurred in 1 patient. We noted no Grade 2 or higher acute gastrointestinal toxicity. One patient developed a Grade 3 late urinary toxicity. No patient showed late gastrointestinal side effects. All 140 dose-volume histograms for 3D HDR brachytherapy were analyzed.

CONCLUSIONS

The new 3D HDR brachytherapy technique, combined with 3D external irradiation and androgen deprivation, is a feasible, so far well-tolerated and effective treatment in the short-time follow-up of median 18 months.

New interstitial HDR brachytherapy technique for prostate cancer: CT based 3D planning after transrectal implantation

We have developed a new interstitial HDR brachytherapy technique for the treatment of prostate cancer using CT based 3D planning after transrectal implantation of four non-parallel needles. CT based needle reconstruction, target definition, evaluation and documentation, including DVHs and 3D imaging, is a feasible, safe and well tolerated treatment concept.

CT guided interstitial high dose rate brachytherapy for recurrent malignant gliomas

This paper describes the technique and preliminary results of high dose rate (HDR) interstitial brachytherapy for recurrent grade III and grade IV gliomas. Although in the initial treatment of malignant gliomas brachytherapy has been shown to give better results than external beam therapy, this has previously always been with low dose rate (LDR) brachytherapy. Stereotactic frames are used for interstitial LDR brachytherapy but a CT image-guided technique does not require such a frame. The survival rates for our initial 53 patients do not significantly differ from LDR results. However, using HDR there are several advantages, including a much shorter treatment time with HDR than LDR and better patient comfort. HDR also allows better individualized optimization of the treatment than LDR.

Comparison of calibration procedures for 192Ir high-dose-rate brachytherapy sources

PURPOSE

To compare the efficacy of different calibration procedures for 192Ir high-dose-rate (HDR) brachytherapy sources and to determine their suitability in clinical practice. In addition the manufacturer's calibration is compared with our experimental measurements so that the accuracy of the source strength on the manufacturer certificate which is supplied with each new 192Ir source can be accessed.

METHODS AND MATERIALS

We compared three types of calibration system: well-type chambers (HDR-1000 and SDS), cylindrical phantom, and plate phantom. The total number of measurements we obtained was 365. The number of sources used for the calibration procedure comparison was 20 and the number used for comparison with the manufacturer's calibration was 46. This study was made during the period 1989-1997. Also, Physikalisch-Technische Bundesanstalt (PTB) calibrated one of our sources using their PTB protocol so that the results could be compared with our own.

RESULTS

The sensitivity of each system on scattering from the room walls was studied. It was found that different minimum lateral distances from the walls were required for the different systems tested: 15 cm and 25 cm for the well-type chambers, 75 cm for the cylindrical phantom, and 13 cm for the plate phantom. The minimum thickness required to reach phantom scattering saturation for the plate phantom setup is 24 cm. The influence of the applicator material used in the calibration setup was found to be 1.7% for the stainless steel dosimetry applicator compared to the plastic 5F applicator. The accuracy of source positioning within the applicator can lead to dosimetric errors of +/-1.2% for the radial distance of 8.0 cm used with both solid phantoms. The change in the response for both well-type chambers was only 0.1% for changes in the source position within +/-7.5 mm around the response peak. Good agreement was found between all dosimetry systems included in our study. Taking the HDR-1000 well-type chamber results as a reference, we observed percentage root mean square (RMS) values of 0.11% for the SDS well-type chamber, 0.44% for the cylindrical, and 0.60% for the plate phantom setup. A comparison of our results using the cylindrical phantom with those of the manufacturer showed a percentage RMS value of 3.3% with a percentage fractional error range of -13.0% to +6.0%. The comparison of our calibration results with those of PTB gave deviations less than 0.4% for all systems.

CONCLUSIONS

Our results have shown that with careful use of all calibration system protocols an accurate determination of source strength can be obtained. However, the manufacturer's calibration is not accurate enough on its own, and it should be mandatory for clinics to always measure the source strength of newly delivered 192Ir brachytherapy sources. The influence of the applicator material, metal or plastic, should always be taken into account.

[Problems of cervical cancer and presentation of a new ring applicator for the afterloading technic with the selectron]

During our radiooncologic experience, we have learned the problems caused by insufficient information on the patient and his tumor. Histologic data, stage and a drawing of the extension of the tumor are generally submitted to the radiotherapist. This study is intended to remind that some other factors are important for the radiooncologic decision about local and temporal dose distribution, such as tumor size, endometrial extension to the fundus, frequency of metastases and recurrences, different histology/grading, and performed surgical technique/radicality. The vital importance of these factors is explained. A new circular applicator is presented for routine afterloading irradiation with the selectron. The applicator has proved to be useful in practice. The problems of the afterloading technique as against the radium technique are indicated, especially with regard to the dose rate in point A.