The Effect of Accelerated Aging on Polylactide Containing Plant Extracts

In this study, natural extracts of plant origin were used as anti-aging compounds of biodegradable polymers. Coffee (0.5–10 wt%), cocoa, or cinnamon extracts were added to the polylactide matrix. The obtained materials were subjected to an accelerated aging process (720, 1440, or 2160 h) at 45 °C and 70% relative humidity under continuous UV radiation. The effectiveness of the tested extracts was compared to a commercially available anti-aging compound, 2 wt% of butylated hydroxytoluene. Visual evaluation, scanning electron microscopy, melt flow rate, thermogravimetry, differential scanning calorimetry, tensile strength, and impact tensile tests were performed. We show that the use of smaller amounts of tested extracts is particularly advantageous, which do not adversely affect the properties of polylactide-based materials at low contents. At the same time, their effectiveness in stabilizing tested properties during the accelerated aging process is mostly comparable to or greater than the reference compound.

Composting of Polylactide Containing Natural Anti-Aging Compounds of Plant Origin

The paper presents the effects of biodegradation of polylactide containing natural anti-aging compounds. Polymer containing 0.5; 5 and 10 wt % of coffee, cocoa or cinnamon extracts were subjected to industrial composting for 7, 14, 21 or 28 days. The effect of the composting process on polylactide properties was examined based on visual assessment, scanning electron microscopy, average molecular weight, differential scanning calorimetry, thermogravimetry, and tensile strength. The impact of the tested extracts on the effects of the composting process was compared with the impact of a commercially available anti-aging compound. It was found that the tested extracts in most cases did not adversely affect the effects of the composting process compared to pure polylactide, often resulting in intensification of biodegradation processes. As a result of the composting process, changes in the macro- and microscopic appearance of the samples and a decrease in molecular weight, phase transition temperatures, thermal resistance, and thermal strength were observed on a scale close to or greater than the reference anti-aging compound.

Copper Filled Poly(Acrylonitrile-co-Butadiene-co-Styrene) Composites for Laser-Assisted Selective Metallization

Selective metallization of polymeric materials using the technique known as laser direct structuring (LDS) is intensively developed. In this technique, metallized products can be manufactured by injection molding or by 3D printing process if rapid prototyping is need. Special additives present in the polymer matrix enable direct electroless metallization only on the surface which was laser activated. This paper presents the results of using copper microparticles introduced into the poly(acrylonitrile-butadiene-styrene) (ABS) matrix at various amounts (up to about 5 vol %). ABS was selected due to its good processing and mechanical properties and as one of the most common thermoplastics used in 3D printing. The influence of copper on structural, mechanical, and processing properties as well as on the effects of laser surface activation were determined. Two types of infrared lasers were tested for surface activation: Nd:YAG fiber laser (λ = 1064 nm) and CO₂ laser (λ = 10.6 µm). Various irradiation parameters (power, scanning speed, and frequency) were applied to find suitable conditions for laser surface activation and electroless metallization. It was found that the composites tested can be effectively metallized using the Nd:YAG laser, but only in a narrow range of radiation parameters. Activation with CO₂ laser failed, regardless of applied irradiation conditions. It resulted from the fact that ablation rate and thickness of modified surface layer for CO₂ were lower than for Nd:YAG laser using the same irradiation parameters (power, speed, and frequency of laser beams), thus the laser wavelength was crucial for successful surface activation.

Modification of Polycaprolactone with Plant Extracts to Improve the Aging Resistance

Natural extracts of plant origin are used as anti-aging compounds of biodegradable polymers. Coffee, cocoa, or cinnamon extracts in amounts from 0.5 to 10 wt.% were added to the polycaprolactone matrix. The manufactured materials were aged at elevated temperatures with increased relative humidity and continuous exposure to UV radiation for 720, 1440, or 2160 h. The performance of the proposed extracts was compared with the retail anti-aging compound, butylated hydroxytoluene. Visual assessment, FTIR analysis, melt flow rate, tensile strength, impact tensile strength, thermogravimetry, and differential scanning calorimetry tests were conducted. Results showed that the use of lower contents of the tested extracts is particularly advantageous. When the content of the extract did not exceed 1 wt.%, no unfavorable influence on the properties of the materials was observed. The stabilizing performance during accelerated aging was mostly similar to or greater than that of the reference compound used.

Laser Activated and Electroless Metalized Polyurethane Coatings Containing Copper(II) L-Tyrosine and Glass Microspheres

Polyurethane coatings containing copper(II) L-tyrosine and glass microspheres were laser irradiated and underwent electroless metallization. Various sizes of glass microspheres were incorporated into the polyurethane coating matrix in order to examine their effects on surface activation and electroless metallization. The surface of the coatings was activated by using ArF excimer laser emitting ultraviolet radiation (λ = 193 nm) using different number of laser pulses and their fluence. The effects of surface activation and metallization were evaluated mainly based on optical and scanning electron microcopies (SEM), energy-dispersive X-ray spectroscopy (EDX) and photoelectron spectroscopy (XPS). It was found that the presence of glass microspheres enabled the reduction in copper complex content, intensified the ablation process (higher cone-like structures created) and resulted in higher content of copper metallic seeds. On the other hand, the glass microspheres concentration, which was higher for lower size microspheres, was advantageous for obtaining a fully metallized layer.

Comparative Evaluation of Cu(acac)2 and {[Cu(μ-O,O'-NO3) (L-arg) (2,2'-bpy)]·NO3}n as Potential Precursors of Electroless Metallization of Laser-Activated Polymer Materials

This paper presents a comparative assessment of Cu(acac)2 and {[Cu(μ-O,O'-NO3) (L-arg)(2,2'-bpy)]·NO3}n as potential precursors for the electroless metallization of laser activated polymer materials. Coatings consisting of polyurethane resin, one of the two mentioned precursor compounds, and antimony oxide (Sb2O3), as a compound strongly absorbing infrared radiation, were applied on the polycarbonate substrate. The coatings were activated with infrared Nd: YAG laser radiation (λ = 1064 nm) and electroless metallized. It was found that after laser irradiation, a micro-rough surface structure of the coatings was formed, on which copper was present in various oxidation states, as well as in its metallic form. For selected parameters of laser irradiation, it was possible to deposit a copper layer on the coating containing Cu(acac)2 and Sb2O3, which is characterized by high adhesion strength. It was also found that the {[Cu(μ-O,O'-NO3) (L-arg)(2,2'-bpy)]·NO3}n complex was not an effective precursor for the electroless metallization of Nd:YAG laser activated coatings. An attempt was made to determine the influence of the precursor chemical structure on the obtained metallization effects.

The Effect of Antimony (III) Oxide on the Necessary Amount of Precursors Used in Laser-Activated Coatings Intended for Electroless Metallization

The article presents research on the potential use of organometallic compounds with the addition of antimony (III) oxide Sb₂O₃ as a coating additive that will make coatings susceptible to electroless metallization after prior surface irradiation with 193 nm wavelength laser radiation and a different number of laser pulses. The surface modification and activation effects were assessed by optical-imagining as well as by scanning electron microscopy (SEM) with energy dispersive analysis (EDX). It was found that the presence of Sb₂O₃ in the coating made it possible to reduce the content of the copper complex, causing an intensive surface ablation, resulting in the formation of a conical structure with a higher content of metallic copper nuclei.