Development of biocompatible synthetic extracellular matrices for tissue engineering

Tissue engineering may provide an alternative to organ and tissue transplantation, both of which suffer from a limitation of supply. Cell transplantation using biodegradable synthetic extracellular matrices offers the possibility of creating completely natural new tissues and so replacing lost or malfunctioning organs or tissues. Synthetic extracellular matrices fabricated from biocompatible, biodegradable polymers play an important role in the formation of functional new tissue from transplanted cells. They provide a temporary scaffolding to guide new tissue growth and organization, and may provide specific signals intended to retain tissue-specific gene expression.

Open pore biodegradable matrices formed with gas foaming

Engineering tissues utilizing biodegradable polymer matrices is a promising approach to the treatment of a number of diseases. However, processing techniques utilized to fabricate these matrices typically involve organic solvents and/or high temperatures. Here we describe a process for fabricating matrices without the use of organic solvents and/or elevated temperatures. Disks comprised of polymer [e.g., poly (D,L-lactic-co-glycolic acid)] and NaCl particles were compression molded at room temperature and subsequently allowed to equilibrate with high pressure CO2 gas (800 psi). Creation of a thermodynamic instability led to the nucleation and growth of gas pores in the polymer particles, resulting in the expansion of the polymer particles. The polymer particles fused to form a continuous matrix with entrapped salt particles. The NaCl particles subsequently were leached to yield macropores within the polymer matrix. The overall porosity and level of pore connectivity were regulated by the ratio of polymer/salt particles and the size of salt particles. Both the compressive modulus (159+/-130 kPa versus 289+/-25 kPa) and the tensile modulus (334+/-52 kPa versus 1100+/-236 kPa) of the matrices formed with this approach were significantly greater than those formed with a standard solvent casting/particulate leaching process. The utility of these matrices was demonstrated by engineering smooth muscle tissue in vitro with them. This novel process, a combination of high pressure gas foaming and particulate leaching techniques, allows one to fabricate matrices with a well controlled porosity and pore structure. This process avoids the potential negatives associated with the use of high temperatures and/or organic solvents in biomaterials processing.

Persistent infection with Theiler's virus leads to CNS autoimmunity via epitope spreading

Multiple sclerosis (MS) is a T cell-mediated autoimmune demyelinating disease, which may be initiated by a virus infection. Theiler's murine encephalomyelitis virus (TMEV), a natural mouse pathogen, is a picornavirus that induces a chronic, CD4+ T cell-mediated demyelinating disease with a clinical course and histopathology similar to that of chronic progressive MS (ref. 3). Demyelination in TMEV-infected mice is initiated by a mononuclear inflammatory response mediated by virus-specific CD4+ T cells targeting virus, which chronically persists in the CNS (ref. 4-6). We show that beginning 3-4 weeks after disease onset, T-cell responses to multiple myelin autoepitopes arise in an ordered progression and may play a pathologic role in chronic disease. Kinetic and functional studies show that T-cell responses to the immunodominant myelin proteolipid protein epitope (PLP139-151) did not arise because of cross-reactivity between TMEV and self epitopes (that is, molecular mimicry), but because of de novo priming of self-reactive T cells to sequestered autoantigens released secondary to virus-specific T cell-mediated demyelination (that is, epitope spreading). Epitope spreading is an important alternate mechanism to explain the etiology of virus-induced organ-specific autoimmune diseases.

Requirement for math5 in the development of retinal ganglion cells

math5 is a murine orthologue of atonal, a bHLH proneural gene essential for the formation of photoreceptors and chordotonal organs in Drosophila. The expression of math5 coincides with the onset of retinal ganglion cell (RGC) differentiation. Targeted deletion of math5 blocks the initial differentiation of 80% of RGCs and results in an increase in differentiated amacrine cells. Furthermore, the absence of math5 abolishes the retinal expression of brn-3b and the formation of virtually all brn-3b-expressing RGCs. These results imply that math5 is a proneural gene essential for RGC differentiation and that math5 acts upstream to activate brn-3b-dependent differentiation processes in RGCs.

Cyclic mechanical strain regulates the development of engineered smooth muscle tissue

We show that the appropriate combinations of mechanical stimuli and polymeric scaffolds can enhance the mechanical properties of engineered tissues. The mechanical properties of tissues engineered from cells and polymer scaffolds are significantly lower than the native tissues they replace. We hypothesized that application of mechanical stimuli to engineered tissues would alter their mechanical properties. Smooth muscle tissue was engineered on two different polymeric scaffolds and subjected to cyclic mechanical strain. Short-term application of strain increased proliferation of smooth muscle cells (SMCs) and expression of collagen and elastin, but only when SMCs were adherent to specific scaffolds. Long-term application of cyclic strain upregulated elastin and collagen gene expression and led to increased organization in tissues. This resulted in more than an order of magnitude increase in the mechanical properties of the tissues.

Angiocentric lymphoma of the head and neck: patterns of systemic failure after radiation treatment

PURPOSE

To investigate the patterns of systemic failure and the clinical outcome in patients with angiocentric lymphoma of the head and neck who were treated with radiation alone, and to discuss the optimal mode of treatment for these patients.

PATIENTS AND METHODS

We reviewed the records of 92 patients with stage I or II angiocentric lymphoma who were treated at Yonsei Cancer Center between 1976 and 1994. All patients were treated with involved-field irradiation. Radiation doses ranged from 40 to 60 Gy (median dose, 50.4 Gy). Treatment response, patterns of treatment failure including systemic failure, and clinical outcome after radiation treatment were analyzed.

RESULTS

The most frequently involved site was the nasal cavity, either alone or in conjunction with other sites. In 16 patients (17.4%), angiocentric lymphoma was accompanied by cervical lymphadenopathy. Disease was classified as stage I in 62 patients (67.4%) and stage II in 30 patients (32.6%). After completion of radiation treatment, 61 patients (66.3%) achieved a complete response and 16 (17.4%) a partial response. Half of the patients (50.0%) ultimately experienced local recurrence with or without other components of failure, whereas regional failure was relatively uncommon (10.9%). Systemic failure occurred in 25.0% of patients during follow-up. Six patients had histologic findings identical to those at the time of the original disease (group I), whereas four patients exhibited morphologic features of frank lymphomas (group II). The majority of patients with systemic relapse had the predilection sites for widespread extranodal involvement, such as the skin, brain, lung, gastrointestinal tract, or testes. In addition, seven patients died from various medical illnesses or immunologic disorders, including hemophagocytic syndrome and second primary cancers (group III). After a median follow-up of 56 months, the overall survival and disease-free survival rates for all patients were 40.1% and 37.8%, respectively. All patients except one with systemic failure died within 1 year.

CONCLUSION

Treatment with radiation alone had suboptimal results, partly because of the occurrence of a variety of systemic failure with diverse clinicopathologic features. Given the frequent occurrence of systemic failure after radiation treatment, we believe that the multimodality treatment approach containing more effective chemotherapeutic agents should be incorporated in the treatment of angiocentric lymphoma confined to the head and neck.

Biomaterials for tissue engineering

Biomaterials play a critical role in the engineering of new functional genitourinary tissues for the replacement of lost or malfunctioning tissues. They provide a temporary scaffolding to guide new tissue growth and organization and may provide bioactive signals (e.g., cell-adhesion peptides and growth factors) required for the retention of tissue-specific gene expression. A variety of biomaterials, which can be classified into three types--naturally derived materials (e.g., collagen and alginate), acellular tissue matrices (e.g., bladder submucosa and small-intestinal submucosa), and synthetic polymers [e.g., polyglycolic acid, polylactic acid, and poly(lactic-co-glycolic acid)]--have proved to be useful in the reconstruction of a number of genitourinary tissues in animal models. Some of these materials are currently being used clinically for genitourinary applications. Ultimately, the development or selection of appropriate biomaterials may allow the engineering of multiple types of functional genitourinary tissues.

Early in vivo experience with tissue-engineered trileaflet heart valves

BACKGROUND

Tissue engineering is a new approach in which techniques are being developed to transplant autologous cells onto biodegradable scaffolds to ultimately form new functional autologous tissue. Workers at our laboratory have focused on tissue engineering of heart valves. The present study was designed to evaluate the implantation of a whole trileaflet tissue-engineered heart valve in the pulmonary position in a lamb model.

METHODS AND RESULTS

We constructed a biodegradable and biocompatible trileaflet heart valve scaffold that was fabricated from a porous polyhydroxyalkanoate (pore size 180 to 240 microm; Tepha Inc). Vascular cells were harvested from ovine carotid arteries, expanded in vitro, and seeded onto our heart valve scaffold. With the use of cardiopulmonary bypass, the native pulmonary leaflets were resected, and 2-cm segments of pulmonary artery were replaced by autologous cell-seeded heart valve constructs (n=4). One animal received an acellular valved conduit. No animal received any anticoagulation therapy. Animals were killed at 1, 5, 13, and 17 weeks. Explanted valves were examined histologically with scanning electron microscopy, biochemically, and biomechanically. All animals survived the procedure. The valves showed minimal regurgitation, and valve gradients were <20 mm Hg on echocardiography. The maximum gradient was 10 mm Hg with direct pressures. Macroscopically, the tissue-engineered constructs were covered with tissue, and there was no thrombus formation on any of the specimens. Scanning electron microscopy showed smooth flow surfaces during the follow-up period. Histological examination demonstrated laminated fibrous tissue with predominant glycosaminoglycans as extracellular matrix. 4-Hydroxyproline assays demonstrated an increase in collagen content as a percentage of native pulmonary artery (1 week 45.8%, 17 weeks 116%). DNA assays showed a comparable number of cells in all explanted samples. There was no tissue formation in the acellular control.

CONCLUSIONS

Tissue-engineered heart valve scaffolds fabricated from polyhydroxyalkanoates can be used for implantation in the pulmonary position with an appropriate function for 120 days in lambs.

Targeted Disruption of the Myocilin Gene (Myoc) Suggests that Human Glaucoma-Causing Mutations Are Gain of Function

Glaucoma is a heterogeneous eye disease and a major cause of blindness worldwide. Recently, primary open angle glaucoma (POAG)-associated mutations have been found in the trabecular meshwork inducible glucocorticoid response gene (TIGR), also known as the myocilin gene (MYOC), at the GLC1A locus on chromosome 1q21-q31. These mutations occurred in a subset of patients with juvenile- and adult-onset POAG and exhibited autosomal dominant inheritance. Ocular expression and its involvement in POAG suggest that TIGR/MYOC may have a role(s) in regulating intraocular pressure (IOP). Here, we report the generation and analysis of mice heterozygous and homozygous for a targeted null mutation in Myoc. Our study shows that Myoc mutant mice are both viable and fertile. Our in vivo findings further demonstrate that Myoc is not required for normal IOP or normal ocular morphology. The lack of a discernable phenotype in both Myoc-heterozygous and Myoc-null mice suggests that haploinsufficiency is not a critical mechanism for POAG in individuals with mutations in MYOC. Instead, disease-causing mutations in humans likely act by gain of function.

Engineering smooth muscle tissue with a predefined structure

Nonwoven meshes of polyglycolic acid (PGA) fibers are attractive synthetic extracellular matrices (ECMs) for tissue engineering and have been used to engineer many types of tissues. However, these synthetic ECMs lack structural stability and often cannot maintain their original structure during tissue development. This makes it difficult to design an engineered tissue with a predefined configuration and dimensions. In this study, we investigated the ability of PGA fiber-based matrices bonded at their fiber crosspoints with a secondary polymer, poly-L-lactic acid (PLLA), to resist cellular contractile forces and maintain their predefined structure during the process of smooth muscle (SM) tissue development in vitro. Physically bonded PGA matrices exhibited a 10- to 35-fold increase in the compressive modulus over unbonded PGA matrices, depending on the mass of PLLA utilized to bond the PGA matrices. In addition, the bonded PGA matrices degraded much more slowly than the unbonded matrices. The PLLA bonding of PGA matrices had no effect on the ability of cells to adhere to the matrices. After 7 weeks in culture, the bonded matrices maintained 101 +/- 4% of their initial volume and an approximate original shape while the unbonded matrices contracted to 5 +/- 1% of their initial volume with an extreme change in their shape. At this time the bonded PGA matrices had a high cellularity, with smooth muscle cells (SMCs) and ECM proteins produced by these cells (e.g., elastin) filling the pores between PGA fibers. This study demonstrated that physically bonded PGA fiber-based matrices allow the maintenance of the configuration and dimensions of the original matrices and the development of a new tissue in a predefined three-dimensional structure. This approach may be useful for engineering a variety of tissues of various structures and shapes, and our study demonstrates the importance of matching both the initial mechanical properties and the degradation rate of a matrix to the specific tissue one is engineering.

In vitro biocompatibility assessment of naturally derived and synthetic biomaterials using normal human urothelial cells

The reconstruction of urinary tissues often employs various types of biomaterials, and adequate material biocompatibility is essential for the successful reconstruction of urinary tissues. In this study we utilized a primary normal human urothelial cell culture system to evaluate the in vitro biocompatibility of a number of naturally derived biomaterials [i.e., bladder submucosa, small intestinal submucosa, collagen, and alginate] and polymeric biomaterials [i.e., poly(glycolic acid), poly(L-lactic acid), poly(lactic-co-glycolic acid), and silicone] that are either experimentally or clinically used in urinary reconstructive surgery. To determine the cytotoxic and bioactive effects of these biomaterials, the cell viability, metabolic activity, apoptotic properties, and DNA-synthesis activity were measured with four types of assays [Neutral Red, 3-(4,5-dimethylthiazol-2-yl)-2,5diphenyl tetrazolium bromide, apoptotic activity, and tritiated thymidine incorporation assays] using extract and direct contact methods. Most of the biomaterials tested did not induce significant cytotoxic effects and exhibited normal metabolic function and cell growth in vitro. This normal primary human urothelial cell culture model is suitable for in vitro biocompatibility assessments and is able to provide information on the cell-biomaterial interactions and the ability of biomaterials to support bioactive cell functions.

Engineered smooth muscle tissues: regulating cell phenotype with the scaffold

Culturing cells on three-dimensional, biodegradable scaffolds may create tissues suitable either for reconstructive surgery applications or as novel in vitro model systems. In this study, we have tested the hypothesis that the phenotype of smooth muscle cells (SMCs) in three-dimensional, engineered tissues is regulated by the chemistry of the scaffold material. Specifically, we have directly compared cell growth and patterns of extracellular matrix (ECM) (e.g. , elastin and collagen) gene expression on two types of synthetic polymer scaffolds and type I collagen scaffolds. The growth rates of SMCs on the synthetic polymer scaffolds were significantly higher than on type I collagen sponges. The rate of elastin production by SMCs on polyglycolic acid (PGA) scaffolds was 3.5 +/- 1.1-fold higher than that on type I collagen sponges on Day 11 of culture. In contrast, the collagen production rate on type I collagen sponges was 3.3 +/- 1.1-fold higher than that on PGA scaffolds. This scaffold-dependent switching between elastin and collagen gene expression was confirmed by Northern blot analysis. The finding that the scaffold chemistry regulates the phenotype of SMCs independent of the scaffold physical form was confirmed by culturing SMCs on two-dimensional films of the scaffold materials. It is likely that cells adhere to these scaffolds via different ligands, as the major protein adsorbed from the serum onto synthetic polymers was vitronectin, whereas fibronectin and vitronectin were present at high density on type I collagen sponges. In summary, this study demonstrates that three-dimensional smooth muscle-like tissues can be created by culturing SMCs on three-dimensional scaffolds, and that the phenotype of the SMCs is strongly regulated by the scaffold chemistry. These engineered tissues provide novel, three-dimensional models to study cellular interaction with ECM in vitro.

Scaffolds for engineering smooth muscle under cyclic mechanical strain conditions

Cyclic mechanical strain has been demonstrated to enhance the development and function of engineered smooth muscle (SM) tissues, but appropriate scaffolds for engineering tissues under conditions of cyclic strain are currently lacking. These scaffolds must display elastic behavior, and be capable of inducing an appropriate smooth muscle cell (SMC) phenotype in response to mechanical signals. In this study, we have characterized several scaffold types commonly utilized in tissue engineering applications in order to select scaffolds that exhibit elastic properties under appropriate cyclic strain conditions. The ability of the scaffolds to promote an appropriate SMC phenotype in engineered SM tissues under cyclic strain conditions was subsequently analyzed. Poly(L-lactic acid)-bonded polyglycolide fiber-based scaffolds and type I collagen sponges exhibited partially elastic mechanical properties under cyclic strain conditions, although the synthetic polymer scaffolds demonstrated significant permanent deformation after extended times of cyclic strain application. SM tissues engineered with type I collagen sponges subjected to cyclic strain were found to contain more elastin than control tissues, and the SMCs in these tissues exhibited a contractile phenotype. In contrast, SMCs in control tissues exhibited a structure more consistent with the nondifferentiated, synthetic phenotype. These studies indicate the appropriate choice of a scaffold for engineering tissues in a mechanically dynamic environment is dependent on the time frame of the mechanical stimulation, and elastic scaffolds allow for mechanically directed control of cell phenotype in engineered tissues.

The prevalence and types of androgenetic alopecia in Korean men and women

BACKGROUND

There are racial differences in the prevalence and types of androgenetic alopecia (AGA). There have been several reports on the prevalence and types of AGA in the general population of caucasians, but few studies on Koreans with samples of sufficient numbers have been reported.

OBJECTIVES

To obtain a more precise estimate of the prevalence and types of AGA in Korean men and women and to compare the results with those in caucasians.

METHODS

The prevalence and types of AGA were analysed in 10,132 Koreans (5531 men and 4601 women) who had visited the Health Examination Centre at Kyung Hee University Hospital for regular health examinations between December 1997 and July 1999. To classify the degree of hair loss for each subject, the Norwood classification was used in men and the Ludwig classification in women. For AGA in men, 'female pattern' was added to the Norwood classification.

RESULTS

In Korean men, the prevalence of AGA (Norwood III or above) at all ages was 14.1%. It increased steadily with advancing age, but was lower than that of caucasians: 2.3% in the third decade, 4.0% in the fourth decade, 10.8% in the fifth decade, 24.5% in the sixth decade, 34.3% in the seventh decade and 46.9% over 70 years. Type III vertex involvement was the most common type in the third decade to the seventh decade; over 70 years, type VI was most common. A 'female pattern' was observed in 11.1% of cases. In Korean women, the prevalence of AGA (Ludwig I or above) at all ages was 5.6%. It also increased steadily with advancing age: 0.2% in the third decade, 2.3% in the fourth decade, 3.8% in the fifth decade, 7.4% in the sixth decade, 11.7% in the seventh decade and 24.7% over 70 years. Grade I was the most common type up to the sixth decade; over 60 years, grade I and II were similar in prevalence. Grade III (total baldness) was not observed. A family history of baldness was present in 48.5% of men and 45.2% of women with AGA.

CONCLUSIONS

The prevalence of AGA in Korean men and women was lower than that in caucasians, as recorded in the literature. Korean men tend to have more frontal hairline preservation and show a more 'female pattern' of hair thinning than caucasians. Therefore, 'female pattern' should be added to the classification of AGA.

Changing prevalence of glomerular diseases in Korean adults: a review of 20 years of experience

BACKGROUND

The prevalence of glomerular diseases differs according to geographic area, race, age and indications for a renal biopsy. This study was conducted to evaluate the distribution and changing patterns of renal diseases during the past 20 years in a large patient population in Korea.

METHODS

Patients aged 16 years or older who underwent a renal biopsy at Severance Hospital in the Yonsei University Health System from 1987 to 2006 were enrolled. All medical records were reviewed retrospectively.

RESULTS

In total, 1818 patients (M:F = 1.02:1) were reviewed. Glomerulonephritis (GN) comprised 85.9% of the total biopsied cases. The most common primary GN was IgA nephropathy (IgAN) (28.3%), which was followed by minimal change disease (MCD) (15.5%), membranous nephropathy (MN) (12.3%), focal segmental glomerulosclerosis (FSGS) (5.6%) and membranoproliferative GN (MPGN) (4.0%). The most common secondary GN was lupus nephritis (8.7%). The most common idiopathic nephrotic syndrome was MCD (38.5%), which was followed by MN and IgAN. Among 128 (7.4%) patients who were HBsAg-positive, MN (30.5%) and MPGN (21.1%) were the most common GN. When the incidence rates between 1987-91 and 2002-06 were compared, IgAN increased from 25.6 to 34.5%, while MCD (from 23.2 to 7.0%) and MPGN (from 6.7 to 1.7%) decreased significantly (P < 0.01).

CONCLUSIONS

IgAN was the most common primary GN, and MCD was the most common cause of nephrotic syndrome. In the 5-year quartile comparison, the relative frequency of IgAN increased, while the relative frequency of MCD and MPGN decreased significantly during the past 20 years.

Large anomalous Hall current induced by topological nodal lines in a ferromagnetic van der Waals semimetal

Topological semimetals host electronic structures with several band-contact points or lines and are generally expected to exhibit strong topological responses. Up to now, most work has been limited to non-magnetic materials and the interplay between topology and magnetism in this class of quantum materials has been largely unexplored. Here we utilize theoretical calculations, magnetotransport and angle-resolved photoemission spectroscopy to propose Fe₃GeTe₂, a van der Waals material, as a candidate ferromagnetic (FM) nodal line semimetal. We find that the spin degree of freedom is fully quenched by the large FM polarization, but the line degeneracy is protected by crystalline symmetries that connect two orbitals in adjacent layers. This orbital-driven nodal line is tunable by spin orientation due to spin-orbit coupling and produces a large Berry curvature, which leads to a large anomalous Hall current, angle and factor. These results demonstrate that FM topological semimetals hold significant potential for spin- and orbital-dependent electronic functionalities.

Optimization of microbial poly(3-hydroxybutyrate) recover using dispersions of sodium hypochlorite solution and chloroform

Optimization was carried out for the recovery of microbiol poly(3-hydroxybutyrate) (PHB) from Alcaligenes eutrophus. This process involved the use of a dispersion made of sodium hypochlorite solution and chloroform. The dispersion enabled us to take advantage of both differential digestion by hypochlorite and solvent extraction by chloroform. The PHB recovery (%) from cell powder was maximized using a 30% hypochlorite concentration, a 90-min treatment time, and a 1:1 (v/v) chloroform-to-aqueous-phase ratio. Under these optimal conditions, the recovery was about 91% and the purity of recovered PHB was higher than 97%. The number average molecular weight, M(n) of recovered PHB was about 300,000 and the weight average molecular weight M(w) was about 1,020,000, compared to the original M(n) of 530,000 and M(w) of 1,272,000. The moderate decrease in both M(n) and M(w) might be ascribed to the shielding effect of chloroform. In addition, the relatively small decrease in M(w) probably resulted from the loss of short PHB chains which might be water soluble. The crystallinity of recovered PHB was in the range of 60 to 65%although a slightly higher crystallinity was observed when the dispersion was used. (c) 1994 John Wiley & Sons, Inc.

Dynamic seeding and in vitro culture of hepatocytes in a flow perfusion system

Our laboratory has investigated hepatocyte transplantation using biodegradable polymer matrices as an alternative treatment to end-stage liver disease. One of the major limitations has been the insufficient survival of an adequate mass of transplanted cells. This study investigates a novel method of dynamic seeding and culture of hepatocytes in a flow perfusion system. In experiment I, hepatocytes were flow-seeded onto PGA scaffolds and cultured in a flow perfusion system for 24 h. Overall metabolic activity and distribution of cells were assessed by their ability to reduce MTT. DNA quantification was used to determine the number of cells attached. Culture medium was analyzed for albumin content. In Experiment II, hepatocyte/polymer constructs were cultured in a perfusion system for 2 and 7 days. The constructs were examined by SEM and histology. Culture medium was analyzed for albumin. In experiment I, an average of 4.4 X 10(6) cells attached to the scaffolds by DNA quantification. Cells maintained a high metabolic activity and secreted albumin at a rate of 13 pg/cell/day. In experiment II, SEM demonstrated successful attachment of hepatocytes on the scaffolds after 2 and 7 days. Cells appeared healthy on histology and maintained a high rate of albumin secretion through day 7. Hepatocytes can be dynamically seeded onto biodegradable polymers and survive with a high rate of albumin synthesis in the flow perfusion culture system.

Phase II study of capecitabine plus cisplatin as first-line chemotherapy in advanced gastric cancer

BACKGROUND

A phase II study was conducted to assess the efficacy and tolerability of combination therapy with capecitabine and cisplatin in patients with advanced gastric cancer.

PATIENTS AND METHODS

Patients with previously untreated metastatic or unresectable measurable gastric adenocarcinoma received oral capecitabine 1250 mg/m(2) twice daily, days 1-14, and i.v. cisplatin 60 mg/m(2) on day 1. This cycle was repeated every 3 weeks.

RESULTS

Forty-two patients were enrolled in this study. Of these, 38 patients were assessable for efficacy and 40 were assessable for toxicity. One patient achieved a complete response and 22 patients had partial responses, giving an overall response rate of 54.8% in the intention-to-treat population (95% confidence interval 39.8% to 69.8%). The median time to progression was 6.3 months and the median overall survival was 10.1 months. The principal adverse events were neutropenia and hand-foot syndrome. Grade 3/4 adverse events were neutropenia (32.5% of patients), thrombocytopenia (10%), stomatitis (2.5%) and diarrhea (5%). Grade 2 and 3 hand-foot syndrome occurred in 20% and 7.5% of patients, respectively. There were no treatment-related deaths.

CONCLUSIONS

The combination of capecitabine and cisplatin is active and well tolerated in patients with advanced gastric cancer.

Effects of 5-fluorouracil and leucovorin in the treatment of pancreatic-biliary tract adenocarcinomas

Adenocarcinomas of the pancreas and biliary tract are highly malignant neoplasms, which are found in the advanced stage. Chemotherapy commonly plays a palliative role in the treatment of pancreatic and biliary tract cancers. 5-Fluorouracil (5-FU) is the most widely studied single agent; the response rate of 5-FU is only 20%. Recently, some reports presented interesting results, in which 5-FU, modulated with levofolinic acid (leucovorin), was active in patients with colorectal cancer. In relation, we performed a phase II study of 5-FU, modulated with leucovorin, in patients affected by advanced pancreatic or biliary tract cancer. Fifty-one patients with nonresectable carcinomas of the pancreas or biliary tract admitted to Korea University Hospital between May 1995 and December 1998 were included in this study. Chemotherapy consisted of leucovorin 25 mg/m2/day by 2-hour intravenous infusion, followed by 5-FU 375 mg/m2/day by bolus intravenous infusion, from day I to day 5. The treatment was repeated every 3 to 4 weeks. A total of 51 eligible patients with advanced adenocarcinoma of the pancreas or biliary tract were enrolled. Of 23 enrolled patients with pancreatic adenocarcinoma, one patient showed complete remission with a survival duration of 13 months (response duration was 9 months). Three patients had partial responses (PRs) with survival times of 6, 12, and 15 months, respectively. The overall response rate was 17.4% (95% confidence interval [CI], 7.2%-36.2%). The median time of overall survival was 6 months (range: 1-15 months). Of 28 enrolled patients with biliary tract cancer, complete responses were observed in 2 patients (7.1%) with survival time of 14 and 16 months, respectively. Seven patients had PRs with a median survival of 8 months. The overall response rate was 32.1% (95% CI, 20.3%-57.5%). The median time of overall survival was 6 months (range: 1-16 months). The most prominent toxicity was mucositis. Hematologic toxicity was less severe. 5-Fluorouracil in modulation with intravenous leucovorin is well tolerated by patients with stage IV pancreatic adenocarcinoma or biliary tract cancer. Although the response rate for patients with pancreatic adenocarcinoma is not better than that achieved using 5-FU monochemotherapy, the 32.1% overall response rate achieved in patients with biliary tract cancer suggests that 5-FU modulation with leucovorin is active in biliary tract cancer.

Atypical manifestations of reversible posterior leukoencephalopathy syndrome: findings on diffusion imaging and ADC mapping

Typically, reversible posterior leukoencephalopathy syndrome (RPLS) involves the parieto-occipital lobes. When regions of the brain other than the parieto-occipital lobes are predominantly involved, the syndrome can be called atypical RPLS. The purpose of this study is to find radiological and pathophysiological features of atypical RPLS by using diffusion-weighted imaging (D-WI). We retrospectively reviewed seven patients (two with eclampsia, one with cyclosporine neurotoxicity, and four with hypertensive encephalopathy) with atypical MR manifestations of RPLS. Changes in signal intensity on T2-weighted imaging (T2-WI) and D-WI, and ADC ratio, were analyzed. In patients with atypical manifestation of RPLS, high signal intensities on T2-WI were noted in the frontal lobe, basal ganglia, thalamus, brainstem, and subcortical white matter in regions other than the parieto-occipital lobes. These areas of increased signal intensities on T2-WI showed increased ADC values, representing vasogenic edema in all seven patients. This result should be very useful in differentiating atypical RPLS from other metabolic brain disorders that affect the same sites with cytotoxic edema.

Class I-deficient resistant mice intracerebrally inoculated with Theiler's virus show an increased T cell response to viral antigens and susceptibility to demyelination

Intracerebral inoculation of Theiler's murine encephalomyelitis virus (TMEV) results in immune-mediated demyelination in susceptible mouse strains. The histology of TMEV-induced demyelination is similar to that seen in patients suffering from multiple sclerosis. It was previously shown that the susceptibility of mice to TMEV-induced demyelination in certain strain combinations is closely associated with the major histocompatibility complex (MHC) class I locus. Here we examine disease susceptibility of beta 2-microglobulin (beta 2M)-deficient transgenic mice lacking class I expression and functional CD8+ T cells. In contrast to TMEV-infected parental C57BL/6 mice, the transgenics develop high levels of virus-specific DTH and T cell proliferation accompanied by an increased frequency of central nervous system (CNS) demyelinating lesions. However, clinical signs of demyelination were not noted. Neither antibody titer nor viral persistence were significantly affected in the beta 2M-deficient mice. These results suggest that in the absence of functional class I/CD8+ cells, the class II-restricted T cell response to TMEV is enhanced and CNS pathogenesis is heightened, although the level is not severe enough to result in clinical disease. When the TMEV-infected mice were subcutaneously immunized with virus, however, the beta 2M-deficient mice displayed clinical symptoms. Therefore, our results strongly suggest that CD8+ T cells do not directly contribute to CNS demyelination. In contrast, such T cells appear to be primarily involved in down-regulation of a potentially damaging CD4+ T cell response in resistant animals, although some of the T cells may play a role in clearing viral persistence in the CNS, resulting in the protection of the host from viral demyelination.

Fabrication of polyphenol-incorporated anti-inflammatory hydrogel via high-affinity enzymatic crosslinking for wet tissue adhesion

Epigallocatechin gallates (EGCGs), isolated from green tea, have intrinsic properties such as anti-oxidant, anti-inflammation, and radical scavenger effects. In this study, we report a tissue adhesive and anti-inflammatory hydrogel formed by high-affinity enzymatic crosslinking of polyphenolic EGCGs. A mixture of EGCG conjugated hyaluronic acids (HA_E) and tyramine conjugated hyaluronic acids (HA_T) was reacted with tyrosinase isolated from Streptomyces avermitillis (SA_Ty) to form that displayed fast enzyme kinetic to form a crosslinked adhesive hydrogel. A 1,2,3-trihydroxyphenyl group in EGCG displayed a high affinity to SA_Ty that allowed HA_E to be quickly oxidized and crosslinked with HA_T to form HA_T and HA_E mixed hydrogel (HA_TE). We then compared the HA_TE hydrogel with commercially available tissue adhesives, such as cyanoacrylate and fibrin glue. We report that the HA_TE exhibited the highest tissue adhesiveness both in wet and dry conditions. Furthermore, HA_TE successfully closed a skin wound and displayed insignificant host tissue responses. This demonstrates that polyphenol-incorporated anti-inflammatory hydrogel may provide a robust tissue adhesive platform for clinical applications.

Biochemical evidence for an editing role of thioesterase II in the biosynthesis of the polyketide pikromycin

The pikromycin biosynthetic gene cluster contains the pikAV gene encoding a type II thioesterase (TEII). TEII is not responsible for polyketide termination and cyclization, and its biosynthetic role has been unclear. During polyketide biosynthesis, extender units such as methylmalonyl acyl carrier protein (ACP) may prematurely decarboxylate to generate the corresponding acyl-ACP, which cannot be used as a substrate in the condensing reaction by the corresponding ketosynthase domain, rendering the polyketide synthase module inactive. It has been proposed that TEII may serve as an "editing" enzyme and reactivate these modules by removing acyl moieties attached to ACP domains. Using a purified recombinant TEII we have tested this hypothesis by using in vitro enzyme assays and a range of acyl-ACP, malonyl-ACP, and methylmalonyl-ACP substrates derived from either PikAIII or the loading didomain of DEBS1 (6-deoxyerythronolide B synthase; AT(L)-ACP(L)). The pikromycin TEII exhibited high K(m) values (>100 microm) with all substrates and no apparent ACP specificity, catalyzing cleavage of methylmalonyl-ACP from both AT(L)-ACP(L) (k(cat)/K(m) 3.3 +/- 1.1 m(-1) s(-1)) and PikAIII (k(cat)/K(m) 2.9 +/- 0.9 m(-1) s(-1)). The TEII exhibited some acyl-group specificity, catalyzing hydrolysis of propionyl (k(cat)/K(m) 15.8 +/- 1.8 m(-1) s(-1)) and butyryl (k(cat)/K(m) 17.5 +/- 2.1 m(-1) s(-1)) derivatives of AT(L)-ACP(L) faster than acetyl (k(cat)/K(m) 4.9 +/- 0.7 m(-1) s(-1)), malonyl (k(cat)/K(m) 3.9 +/- 0.5 m(-1) s(-1)), or methylmalonyl derivatives. PikAIV containing a TEI domain catalyzed cleavage of propionyl derivative of AT(L)-ACP(L) at a dramatically lower rate than TEII. These results provide the first unequivocal in vitro evidence that TEII can hydrolyze acyl-ACP thioesters and a model for the action of TEII in which the enzyme remains primarily dissociated from the polyketide synthase, preferentially removing aberrant acyl-ACP species with long half-lives. The lack of rigorous substrate specificity for TEII may explain the surprising observation that high level expression of the protein in Streptomyces venezuelae leads to significant (>50%) titer decreases.