Lack of long-term effects of in utero exposure to zidovudine among uninfected children born to HIV-infected women. Pediatric AIDS Clinical Trials Group Protocol 219/076 Teams

CONTEXT

With the success of zidovudine chemoprophylaxis for prevention of perinatal transmission of the human immunodeficiency virus (HIV), an increasing number of HIV-exposed but uninfected children will have in utero exposure to zidovudine and other antiretroviral drugs.

OBJECTIVE

To evaluate the long-term effects of in utero exposure to zidovudine vs placebo among a randomized cohort of uninfected children.

DESIGN

Prospective cohort study based on data collected during Pediatric AIDS Clinical Trials Group Protocol 076, a perinatal zidovudine HIV prevention trial, and Protocol 219, a long-term observational protocol.

SETTING

Pediatric research clinics in the United States.

PATIENTS

Two hundred thirty-four uninfected children born to 230 HIV-infected women enrolled in Protocol 076 and followed up through February 28, 1997, in Protocol 219 (122 in the zidovudine group and 112 in the placebo group).

MAIN OUTCOME MEASURES

Physical growth measurements, immunologic parameters, cognitive/developmental function, occurrence of neoplasms, and mortality data assessed every 6 months for children younger than 24 months and yearly thereafter or as clinically indicated. Baseline echocardiogram and funduscopic evaluations were collected before 36 months of age.

RESULTS

Median age of children at time of last follow-up visit was 4.2 years (range, 3.2-5.6 years). There were no significant differences between children exposed to zidovudine and those who received placebo in terms of sequential data on lymphocyte subsets; weight, height, and head circumference z scores; and cognitive/developmental function. No deaths or malignancies occurred. Two children (both exposed to zidovudine) are being followed up for abnormal, unexplained ophthalmic findings. One child exposed to zidovudine had a mild cardiomyopathy on echocardiogram at the age of 48 months; the child is clinically asymptomatic.

CONCLUSIONS

No adverse effects were observed in HIV-uninfected children with in utero and neonatal exposure to zidovudine followed up for as long as 5.6 years. Continued prospective evaluations of children born to HIV-infected women who are exposed to antiretroviral or immunotherapeutic agents are critical to assess the long-term safety of interventions that prevent perinatal HIV transmission.

Requirements for binding and signaling of the kinase domain receptor for vascular endothelial growth factor

Vascular endothelial growth factor (VEGF) is a dimeric hormone that controls much of vascular development through binding and activation of its kinase domain receptor (KDR). We produced analogs of VEGF that show it has two receptor-binding sites which are located near the poles of the dimer and straddle the interface between subunits. Deletion experiments in KDR indicate that of the seven IgG-like domains in the extracellular domain, only domains 2-3 are needed for tight binding of VEGF. Monomeric forms of the extracellular domain of KDR bind approximately 100 times weaker than dimeric forms showing a strong avidity component for binding of VEGF to predimerized forms of the receptor. Based upon these structure-function studies and a mechanism in which receptor dimerization is critical for signaling, we constructed a receptor antagonist in the form of a heterodimer of VEGF that contained one functional and one non-functional site. These studies establish a functional foundation for the design of VEGF analogs, mimics, and antagonists.

Silicon micromachining to tissue engineer branched vascular channels for liver fabrication

To date, many approaches to engineering new tissue have emerged and they have all relied on vascularization from the host to provide permanent engraftment and mass transfer of oxygen and nutrients. Although this approach has been useful in many tissues, it has not been as successful in thick, complex tissues, particularly those comprising the large vital organs such as the liver, kidney, and heart. In this study, we report preliminary results using micromachining technologies on silicon and Pyrex surfaces to generate complete vascular systems that may be integrated with engineered tissue before implantation. Using standard photolithography techniques, trench patterns reminiscent of branched architecture of vascular and capillary networks were etched onto silicon and Pyrex surfaces to serve as templates. Hepatocytes and endothelial cells were cultured and subsequently lifted as single-cell monolayers from these two-dimensional molds. Both cell types were viable and proliferative on these surfaces. In addition, hepatocytes maintained albumin production. The lifted monolayers were then folded into compact three-dimensional tissues. Thus, with the use microfabrication technology in tissue engineering, it now seems feasible to consider lifting endothelial cells as branched vascular networks from two-dimensional templates that may ultimately be combined with layers of parenchymal tissue, such as hepatocytes, to form three-dimensional conformations of living vascularized tissue for implantation.

The health burden of breast hypertrophy

Women seeking consultation for the surgical relief of symptoms associated with breast hypertrophy have been the focus of many studies. In contrast, little is known about those women with breast hypertrophy who do not seek symptomatic relief. The purpose of this study was to describe the health burden of breast hypertrophy by using a set of validated questionnaires and to compare women with breast hypertrophy who seek surgical treatment with those who do not. In addition, this latter group was compared with a group of control women without breast hypertrophy. Women seeking consultation for surgery were recruited from 14 plastic-surgery practices. Control subjects were recruited by advertisements in primary-care offices and newspapers. Women were asked to complete a self-report questionnaire that included the European Quality of Life (EuroQol) questionnaire, McGill Pain Questionnaire, Multidimensional Body Self Relations Questionnaire (MBSRQ), the Short Form-36 (SF-36) questionnaire, and questions regarding breast-related symptoms, comorbidities, and bra size. Descriptive statistics were compiled for three groups of women: (1) hypertrophy patients seeking surgical care, (2) hypertrophy control subjects (those whose reported bra-cup size was a D or larger), and (3) normal control subjects (those whose reported bra-cup size was an A, B, or C). The multiple linear regression method was used to compare the health burdens across groups while adjusting for other variables. Two hundred ninety-one women seeking surgical care and 195 control subjects were enrolled in the study. The 184 control subjects with bra-cup information available were further separated into 88 hypertrophy control subjects and 96 normal control subjects. In the control group, bra-cup size was correlated with health-burden measures, whereas in the surgical candidates, it was not. When scores were compared across the three groups, significant differences were found in all health-burden measures. The surgical candidates scored more poorly on the EuroQol utility, McGill pain rating index, MBSRQ appearance evaluation, physical component scale of the SF-36, and on breast symptoms than did the two control groups. In addition, the hypertrophy control subjects scored more poorly than the normal control subjects. With multiple linear regression analysis incorporating important potential confounders, the poorer scores in the surgical candidates remained statistically significant. It was concluded that breast hypertrophy in those seeking surgical care and those not seeking surgery has a significant impact on women's quality of life as measured by validated and widely used self-report instruments including the EuroQol, MBSRQ, McGill Pain Questionnaire, and the SF-36. Likewise, a new assessment instrument for breast-related symptoms also demonstrated greater symptomatology in women with breast hypertrophy.

A review of the literature on the etiology of capsular contracture and a pilot study to determine the outcome of capsular contracture interventions

The etiology of capsular contracture is unclear and probably multifactorial. This review covers the literature on several proposed contracture factors, including filler material, implant placement, surface texture, and bacterial infection. The pilot study's goal was to test the feasibility of a data collection form, which could be used in a scaled-up study analyzing multiple surgeon's records. The goal of the expanded version of this study will be to determine the efficacy of available interventions for capsular contracture, including surveillance. The Breast Implant Public Health Project, LLC (BIPHP), piloted a retrospective review of outcomes in women who had interventions to relieve capsular contracture or had chosen a wait-and-watch approach. An evaluation of the efficacy of various treatments can help women decide if they want to pursue treatment at all and, if so, which treatment might offer them the best solution. BIPHP researchers (E.E.A., M.E.) developed a data collection form after reviewing records of three surgeons (B.C., W.P., V.L.Y.). During the data collection using the same records, we tested a randomization process to identify women with capsular contracture who underwent various interventions, including a wait-and-watch strategy, and those who had no mention of any intervention or waiting approach. Data were gathered on a total of 90 breasts with capsular contracture (scored Baker I-IV or qualitatively), of which 45 underwent a total of 102 interventions for capsular contracture. Interventions were classified as "closed capsulotomy," "surgical," or "watchful waiting." Closed capsulotomy was performed most often (47%), followed by surgery (29%) and watchful waiting (21%). Presurgical Baker scores averaged higher in breasts that underwent surgery (3.1) than for watchful waiting (2.5) or closed capsulotomy (2.3). Though closed capsulotomies had 100% of outcomes scoring "improved" or "same," 58% of the breasts underwent the procedure more than once, suggesting that the favorable outcome was short-lived. The wait-and-watch approach resulted in scores of either "same" or "worse"; surgery (open capsulotomy, repositioning, or capsulectomy) resulted in 79% improved, 16% same, and 5% worse outcomes in breasts with outcomes listed. In all intervention procedure categories, outcomes were frequently unavailable; they were noted only 60% of the time (52/87). The missing 40% may have resulted from the doctor's failure to note it in the chart, satisfied patients not returning for additional treatment, or dissatisfied patients seeking treatment elsewhere. Generally, the data collection forms and procedures were workable; however, we uncovered issues to address in the scale-up of this pilot study: (1) the outcome report rate was 60%; (2) though Baker scores are commonly used to evaluate the degree of capsular contracture, it seems that grade I may have different meanings for different surgeons, which would need to be clarified; (3) participating surgeons will need to divulge standard-of-care items that they may not have included in medical records, but routinely performed (e.g., patient massage, use of prophylactic antibiotics); and (4) records were initially separated by "implant," then researchers realized that a more useful collection would be by "breast." The latter approach captures the history of the breast in one record, which may be more important to contracture than the differences in implants. With the modifications discussed, the study can be scaled up to encompass as many records as necessary to achieve robust statistical power. These data will add to the existing literature regarding factors associated with capsular contracture and identify factors that affect the successful outcome of capsular contracture interventions.

Diagnosis of breast implant rupture: imaging findings and relative efficacies of imaging techniques

OBJECTIVE

The purpose of this study was to compare the efficacies of mammography, sonography, CT, and MR imaging in the detection of breast implant rupture and to analyze the imaging findings.

SUBJECTS AND METHODS

Thirty-two women with 63 silicone breast implants participated in the study. All but one had signs and symptoms suggestive of rupture, and all had requested that their implants be removed before they were enrolled in this imaging study. All patients had film-screen mammography, sonography, CT, and MR imaging. Twenty-two ruptures were found at surgery; 21 were intracapsular and one was extracapsular. The relative efficacies of the imaging studies were determined, and the imaging findings were compared with the surgical results.

RESULTS

Of the 32 women with 63 implants, mammographic sensitivity for detecting implant rupture was only 23% but the specificity was 98%. Sonography had a higher sensitivity (59%), but its specificity was significantly lower (79%). CT had a sensitivity of 82% and a specificity of 88%. MR was the only imaging technique that consistently provided evidence that enabled the evaluation of intracapsular and extracapsular ruptures. The sensitivity and specificity of MR imaging were 95% and 93%, respectively.

CONCLUSION

Our results show that MR imaging is more sensitive and specific for the detection of breast implant rupture than is mammography, CT, or sonography.

Substituted 3-imidazo[1,2-a]pyridin-3-yl- 4-(1,2,3,4-tetrahydro-[1,4]diazepino-[6,7,1-hi]indol-7-yl)pyrrole-2,5-diones as highly selective and potent inhibitors of glycogen synthase kinase-3

Glycogen synthase kinase-3 (GSK3) is involved in signaling from the insulin receptor. Inhibitors of GSK3 are expected to effect lowering of plasma glucose similar to insulin, making GSK3 an attractive target for the treatment of type 2 diabetes. Herein we report the discovery of a series of potent and selective GSK3 inhibitors. Compounds 7-12 show oral activity in an in vivo model of type II diabetes, and 9 and 12 have desirable PK properties.

Induction of tolerance in composite-tissue allografts

BACKGROUND

Transplantation of composite-tissue allograft (CTA) such as the human hand recently became a clinical reality. The high risks associated with the use of lifelong immunosuppression have been the prohibiting factor in the routine use of the CTA transplants. In this article, we present a new approach of inducing long-term, donor-specific tolerance to CTAs without recipient preconditioning and need for chronic immunosuppression.

METHODS

We have developed a clinically applicable 35-day protocol that induces donor-specific tolerance in a rat hindlimb-transplantation model across major histocompatibility complex (MHC) barrier [Lewis-Brown-Norway (LBN, RT1 -->F1) to Lewis (LEW, RT1 ) by using cyclosporine A (CsA) and a mouse monoclonal antibody against rat alphabeta-T-cell receptor (TCR) to systemically eliminate alloresponsive cells. Standard skin grafting, flow cytometry (FC), and mixed lymphocyte reaction (MLR) were used to assess efficacy of immunodepletion and confirm donor-specific tolerance and chimerism.

RESULTS

Under this protocol long-term tolerance (>720 days) was induced in all (n=5) CTA recipients across the MHC barrier without further need for immunosuppression. Tolerance was confirmed in all limb-allograft recipients by skin grafting in vivo and by MLR in vitro. The animals rejected third-party grafts, indicating immunocompetence.

CONCLUSIONS

In this CTA model, combined protocol of alphabeta-TCR monoclonal antibody and CsA resulted in induction of donor-specific tolerance across the MHC barrier without recipient conditioning. We believe that our findings will foster development of new therapeutic strategies and expand clinical applications for composite-tissue transplantation.

A label-free optical technique for detecting small molecule interactions

A novel approach for the label-free detection of molecular interactions is presented in which a colorimetric resonant grating is used as a surface binding platform. The grating, when illuminated with white light, is designed to reflect only a single wavelength. When molecules are attached to the surface, the reflected wavelength (color) is shifted due to the change of the optical path of light that is coupled into the grating. By linking receptor molecules to the grating surface, complementary binding molecules can be detected without the use of any kind of fluorescent probe or radioactive label. The detection technique is capable of detecting the addition and removal of small molecules as they interact with receptor molecules on the sensor surface or enzymes in the solution surrounding the sensor. Two assays are presented to exemplify the detection of small molecule interactions with the biosensor. First, an avidin receptor layer is used to detect 244 Da biotin binding. Second, a protease assay is performed in which a 136 Da p-nitroanilide (pNA) moeity is cleaved from an immobilized substrate. Because the sensor structure can be embedded in the plastic surfaces of microtiter plates or the glass surfaces of microarray slides, it is expected that this technology will be most useful in applications where large numbers of biomolecular interactions are measured in parallel, particularly when molecular labels will alter or inhibit the functionality of the molecules under study. Screening of pharmaceutical compound libraries with protein targets, and microarray screening of protein-protein interactions for proteomics are examples of applications that require the sensitivity and throughput afforded by this approach.

Receptor-selective variants of human vascular endothelial growth factor. Generation and characterization

Vascular endothelial growth factor (VEGF) is a pleiotropic factor that exerts a multitude of biological effects through its interaction with two receptor tyrosine kinases, fms-like tyrosine kinase (Flt-1) or VEGF receptor 1 and kinase insert domain-containing receptor (KDR) or VEGF receptor 2. Whereas it is commonly accepted that KDR is responsible for the proliferative activities of VEGF, considerable controversy and uncertainty exist about the role of the individual receptors in eliciting many of the other effects. Based on a comprehensive mutational analysis of the receptor-binding site of VEGF, an Flt-1-selective variant was created containing four substitutions from the wild-type protein. This variant bound with wild-type affinity to Flt-1, was at least 470-fold reduced in binding to KDR, and had no activity in cell-based assays measuring autophosphorylation of KDR or proliferation of primary human vascular endothelial cells. Using a competitive phage display strategy, two KDR-selective variants were discovered with three and four changes from wild-type, respectively. Both variants had approximately wild-type affinity for KDR, were about 2000-fold reduced in binding to Flt-1, and showed activity comparable with the wild-type protein in KDR autophosphorylation and endothelial cell proliferation assays. These variants will serve as useful reagents in elucidating the roles of Flt-1 and KDR.

Concentrations of levofloxacin (HR 355) in the respiratory tract following a single oral dose in patients undergoing fibre-optic bronchoscopy

Concentrations of levofloxacin were measured in bronchial biopsies, alveolar macrophages (AM), epithelial lining fluid (ELF) and serum following a single oral dose. Concentrations were measured by a microbiological assay method. A total of 35 patients undergoing fibre-optic bronchoscopy were studied. Mean serum, AM, ELF and biopsy concentrations were as follows. 0.5 h: 4.73 mg/L, 19.1 mg/L, 4.74 mg/L and 4.3 mg/kg; 1 h: 6.6 mg/L, 32.5 mg/L, 10.8 mg/L and 8.3 mg/kg; 2 h: 4.9 mg/L, 41.9 mg/L, 9.0 mg/L and 6.5 mg/kg; 4 h: 4.1 mg/L, 27.7 mg/L, 10.9 mg/L and 6.0 mg/kg; and 6-8 h: 4.0 mg/L, 38.4 mg/L, 9.6 mg/L and 4.0 mg/kg respectively. Mean serum and AM concentrations at 12-24 h were 1.2 and 13.9 mg/L respectively (concentrations in biopsy and ELF were only measurable in three of the six patients). These concentrations exceed the MIC90s of the common respiratory pathogens, Haemophilus influenzae (0.015 mg/L), Moraxella catarrhalis (0.06 mg/L) and Streptococcus pneumoniae (1 mg/L) and suggest that levofloxacin should be efficacious in the treatment of community- and hospital-acquired respiratory infection.

The development of potent and selective bisarylmaleimide GSK3 inhibitors

Many 3-aryl-4-(1,2,3,4-tetrahydro[1,4]diazepino[6,7,1-hi]indol-7-yl)maleimides exhibit potent GSK3 inhibitory activity (<100 nM IC(50)), although few show significant selectivity (>100x) versus CDK2, CDK4, or PKCbetaII. However, combining 3-(imidazo[1,2-a]pyridin-3-yl), 3-(pyrazolo[1,5-a]pyridin-3-yl) or aza-analogs with a 4-(2-acyl-(1,2,3,4-tetrahydro[1,4]diazepino[6,7,1-hi]indol-7-yl)) group on the maleimide resulted in very potent inhibitors of GSK3 (</=5 nM) with >160 to >10,000-fold selectivity versus CDK2/4 and PKCbetaII. These compounds also inhibited tau phosphorylation in cells and were effective in lowering plasma glucose in a rat model of type 2 diabetes (ZDF rat).

Small molecule inhibition of the TNF family cytokine CD40 ligand through a subunit fracture mechanism

BIO8898 is one of several synthetic organic molecules that have recently been reported to inhibit receptor binding and function of the constitutively trimeric tumor necrosis factor (TNF) family cytokine CD40 ligand (CD40L, aka CD154). Small molecule inhibitors of protein-protein interfaces are relatively rare, and their discovery is often very challenging. Therefore, to understand how BIO8898 achieves this feat, we characterized its mechanism of action using biochemical assays and X-ray crystallography. BIO8898 inhibited soluble CD40L binding to CD40-Ig with a potency of IC(50) = 25 μM and inhibited CD40L-dependent apoptosis in a cellular assay. A co-crystal structure of BIO8898 with CD40L revealed that one inhibitor molecule binds per protein trimer. Surprisingly, the compound binds not at the surface of the protein but by intercalating deeply between two subunits of the homotrimeric cytokine, disrupting a constitutive protein-protein interface and breaking the protein's 3-fold symmetry. The compound forms several hydrogen bonds with the protein, within an otherwise hydrophobic binding pocket. In addition to the translational splitting of the trimer, binding of BIO8898 was accompanied by additional local and longer-range conformational perturbations of the protein, both in the core and in a surface loop. Binding of BIO8898 is reversible, and the resulting complex is stable and does not lead to detectable dissociation of the protein trimer. Our results suggest that a set of core aromatic residues that are conserved across a subset of TNF family cytokines might represent a generic hot-spot for the induced-fit binding of trimer-disrupting small molecules.

Epolones: novel sesquiterpene-tropolones from fungus OS-F69284 that induce erythropoietin in human cells

In the course of our screening for small molecule modulators of erythropoietin gene expression, two novel sesquiterpene tropolones and pycnidone were isolated from a culture of OS-F69284 (ATCC 74390). Their structures were elucidated by extensive 1H and 13C NMR spectroscopic studies and chemical reactions. These compounds induced erythropoietin gene expression 5-fold at a concentration of 1-1.6 microM.

Oral vitamin B12 can change our practice

Oral vitamin B12 can provide an effective alternative to intramuscular injections, so giving patients a choice and reducing costs in primary care. This study investigated the effectiveness, safety, and acceptability of oral vitamin B12 as replacement therapy in patients with vitamin B12 deficiency in a city general practice population. Forty patients previously maintained on vitamin B12 injections were given 1000 micro g of oral cyanocobalamin daily for up to 18 months. All the patients maintained satisfactory serum B12 levels and showed normal haematology and neurology. Compliance and acceptability was excellent. The time for a change in practice has indeed arrived.

Liposomal formulation increases local delivery of amphotericin from bone cement: a pilot study

BACKGROUND

Amphotericin is a highly toxic hydrophobic antifungal. Delivery of amphotericin from antifungal-loaded bone cement (ALBC) is much lower than would be expected for an equivalent load of water-soluble antibacterials. Lipid formulations have been developed to decrease amphotericin toxicity. It is unknown how lipid formulations affect amphotericin release and compressive strength of amphotericin ALBC.

QUESTIONS/PURPOSES

We asked if amphotericin release from liposomal amphotericin ALBC (1) changed with amphotericin load; (2) differed from release from amphotericin deoxycholate ALBC; (3) was an active drug; and (4) if liposomal amphotericin affected the bone cement strength.

METHODS

Forty-five standardized test cylinders were fabricated from three formulations of ALBC: Simplex™ P bone cement with 200 mg liposomal amphotericin, 800 mg liposomal amphotericin, or 800 mg amphotericin deoxycholate per batch. For each ALBC formulation, cumulative released amphotericin was determined from five cylinders, and compressive strength was measured for 10 cylinders, five before elution and five after. Activity of released amphotericin was determined by growth inhibition assay.

RESULTS

Amphotericin release was greater for increased load of liposomal amphotericin: 770 μg for 800 mg versus 118 μg for 200 mg. Amphotericin release was greater from liposomal ALBC than from deoxycholate ALBC: 770 μg versus 23 μg over 7 days for 800 mg amphotericin. Released amphotericin was active. Compressive strength of liposomal ALBC is decreased, 67 MPa and 34 MPa by Day 7 in elution for the 200-mg and 800-mg formulations, respectively.

CONCLUSIONS

Liposomal amphotericin has greater amphotericin release from ALBC than amphotericin deoxycholate. Compressive strength of liposomal amphotericin ALBC decreases to less than recommended for implant fixation. Local toxicity data are needed before liposomal amphotericin ALBC can be used clinically.

Stability of reamed and unreamed intramedullary tibial nails: a biomechanical study

We examined the correlation of bone mineral density and bone strength in the cadaver tibia, and looked in vitro at the relative stability of tibial fractures fixed with either reamed or unreamed tibial nails. Bone-mineral density correlated well with bone strength (r = 0.946), but paired tibias did not correlate closely. The unreamed nail-bone construct was less stable than the reamed construct in each pair tested (P < 0.05), and a comparison of all bones showed it to be less stable at all levels of our testing regimen, including failure (P < 0.01). Bending and breakage was seen in four of the smaller unreamed interlocking screws (4 mm).

Concentrations of trovafloxacin in bronchial mucosa, epithelial lining fluid, alveolar macrophages and serum after administration of single or multiple oral doses to patients undergoing fibre-optic bronchoscopy

Concentrations of trovafloxacin were measured in serum, alveolar macrophages, epithelial lining fluid and bronchial mucosa following single and multiple oral doses. Concentrations were determined using a microbiological assay method. There were 18 subjects in the single dose and nine subjects in the multiple dose groups. After single dosing, mean concentrations in serum, alveolar macrophages, epithelial lining fluid and bronchial mucosa at 6, 12 and 24 h were as follows: 6 h, 1.41 mg/L, 19.06 mg/L, 3.01 mg/L and 1.52 mg/kg; 12 h, 0.85 mg/L, 16.22 mg/L, 4.8 mg/L and 1.01 mg/kg; 24 h, 0.37 mg/L, 10.23 mg/L, 0.93 mg/L, and no measurable concentration, respectively. After multiple dosing (approximately 6 h post-dose) the corresponding concentrations were 1.47 mg/L, 34.3 mg/L, 10.21 mg/L and 1.67 mg/kg, respectively. These concentrations exceed the MIC90s for the common respiratory pathogens, Haemophilus influenzae 0.06 mg/L, Moraxella catarrhalis 0.008 mg/L and Streptococcus pneumoniae 0.12 mg/L and suggest that trovafloxacin should be efficacious in the treatment of community- and hospital-acquired respiratory infections.

Dehydroepiandrosterone as an enhancer of functional recovery following crush injury to rat sciatic nerve

This study was designed to investigate the effect of dehydroepiandrosterone (DHEA) on the recovery of the rat sciatic nerve following crush injury. A standard hemostat system was used to create the injury, with a length of 1.5 mm in three groups of 18 animals each. In group I, the crush injury was applied without any treatment. In groups II and III, vehicle (ethylene glycol) and DHEA solutions were injected subepineurally 30 min following the crush injury. Sciatic function index (SFI), toe contracture measurement, gastrocinemius muscle weight, total number of myelinated fibers, fiber diameters, myelin thickness, and axon/fiber cross-sectional ratio were measured at 3, 6, and 12 weeks. The SFI values in the DHEA group showed a faster return to normal values confirmed at 3 and 6 weeks (P < 0.05). The number of myelinated fibers and fiber diameters at 6 and 12 weeks were significantly higher in the DHEA group (P < 0.05). In this study, the subepineural injection of DHEA following crush injury was found to enhance functional recovery of the rat sciatic nerve.

Aspergillus fumigatus infection in a mega prosthetic total knee arthroplasty: salvage by staged reimplantation with 5-year follow-up

Fungal infection after total joint arthroplasty is an extremely serious complication and a challenge to the treating physician. When a fungal infection is compounded by a massive allograft or a metallic segmental replacement of the femur or other long bone, treatment options become increasingly limited and commonly have led to arthrodesis or amputation of the infected limb. We present the first case report of a low-grade osteosarcoma treated with a segmental distal femoral allograft prosthetic composite knee arthroplasty, which was complicated by infection with Aspergillus fumigatus. This complication was treated successfully with a staged reimplantation procedure, intravenous amphotericin, and oral fluconazole suppression. At 5 years after reimplantation, the patient has had no evidence of infection, no pain, and excellent range of motion without extensor lag. The Knee Society knee score improved from 50 to 100, and the function score improved from 40 to 100 (for both scores, 100 is the maximum).

Structure-activity relationships of pyrimidines as dihydroorotate dehydrogenase inhibitors

The activity of dihydroorotate dehydrogenase (DHO-dehase) has been reported to decrease both in vitro and in vivo in hepatocellular carcinomas. DHO-dehase, the fourth enzyme of the de novo pyrimidine biosynthetic pathway, is a mitochondrial enzyme which is both a potential rate-limiting reaction in the de novo pyrimidine biosynthetic pathway and a potential therapeutic target for tumor inhibitors. This paper reports results on a series of pyrimidine analogs of dihydroorotate (DHO) and orotic acid (OA) as inhibitors of DHO-dehase. The enzyme test results established that the intact amide and imide groups of the pyrimidine ring and the 6-carboxylic acid are required for significant enzyme inhibition. The testing of several functional groups similar in characteristics to that of the carboxylic acid, such as sulfonamide, tetrazole and phosphate, indicated that the carboxylic acid group is preferred by the enzyme. Using various 5-substituted OA and DHO derivatives, it was shown that there is a steric limitation of a methyl group at this position. The compound D,L-5-trans-methyl DHO (7) (Ki of 45 microM) was both an inhibitor and a weak substrate for the enzyme, demonstrating that mechanism-based enzyme inhibitors should be effective. The testing results further suggest that a negatively charged enzyme substituent may be present near the 5-position of the pyrimidine ring and that there may be an enzyme-substrate metal coordination site near the N-1 and carboxylic acid positions of the pyrimidine ring. The combined testing results were then used to define both conformational and steric substrate enzyme binding requirements from which a model was proposed for the binding of DHO and OA to the DHO-dehase active site.

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

BACKGROUND

Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres.

METHODS

This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low-middle-income countries.

RESULTS

In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of 'single-use' consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low-middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia.

CONCLUSION

This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high- and low-middle-income countries.

The effect of kyphosis on the mechanical strength of a long-segment posterior construct using a synthetic model

STUDY DESIGN

This experimental study used synthetic spine models to compare the effect of the angle of kyphosis, rod diameter, and hook number on the biomechanical stiffness of a long-segment posterior spinal construct.

OBJECTIVE

To examine the biomechanical effects of incremental kyphosis on variously instrumented long-segment posterior spinal constructs.

SUMMARY OF BACKGROUND DATA

Euler's formula for loading of curved long columns would suggest that kyphosis has a profound impact on the biomechanical behavior of long-segment posterior spinal constructs. The effects of sagittal contour on the mechanical properties of long-segment posterior spinal constructs have not been well documented.

METHODS

Kyphotic and straight synthetic spine models were used to test long-segment posterior instrumentation constructs biomechanically while varying rod diameter and the number of hook sites. The synthetic spines, composed of polypropylene vertebral blocks and isoprene elastomer intervertebral spacers, were fabricated with either 0 degrees, 27 degrees, or 53 degrees of sagittal contour. The models were instrumented with 5.5- or 6.35-mm titanium rods, and with either 8 or 12 hooks. The models were loaded from 0 to 300 N in a cyclical ramp fashion using an MTS 858 Bionix testing device testing device. Construct stiffness (force and displacement) during axial compression was determined.

RESULTS

Straight model: Changing the hook number from 8 to 12 caused a 32% increase in construct stiffness with the 5.5-mm rod. Changing the rod diameter from 5.5 to 6.35 mm caused a 36% increase in construct stiffness with the 8-hook pattern. Changing both the rods and hooks caused the stiffness to increase 44%. 27 degrees

MODEL

Changing the hook number from 8 to 12 caused a 20% increase in construct stiffness with the 6.5-mm rod. Changing the rod diameter from 5.5 to 6.35 mm caused a 29% increase in construct stiffness with the 12-hook pattern. Changing both the rods and hooks caused the construct stiffness to increase 26%. 53 degrees

MODEL

Changing the hook number from 8 to 12 caused a 14% increase in construct stiffness with the 6.35-mm rod. Changing the rod diameter from 5.5 to 6.35 mm caused a 17% (P<0.0005) increase in construct stiffness with the 12-hookpattern. Changing both rods and hooks caused the stiffness to increase 21%. Summary data on angular kyphosis: Using the same rod diameter and the same number of hooks, and progressing from a straight alignment to 27 degrees of sagittal contour decreased construct stiffness 32%. Going from straight alignment to 53 degrees decreased the stiffness 59.6%. All reported values were statistically significant (P < 0.0005).

CONCLUSIONS

The biomechanical stiffness of the straight spine was sensitive to both an increase in hook fixation sites and an increase in rod diameter. The kyphotic spines, however, were more sensitive to variations in rod diameter. Although with increasing kyphosis, the optimum instrumentation strategy will maximize both rod diameter and the number of hook sites, instrumented kyphotic spines remain biomechanically "disadvantaged" as compared with nonkyphotic instrumented spines.

A biomechanical study of the flexor digitorum superficialis: effects of digital pulley excision and loss of the flexor digitorum profundus

Many reports have been devoted to characterizing the significance of the pulleys for the flexor digitorum profundus (FDP). However, no comparable work has been published on the flexor digitorum superficialis (FDS). This study characterized the FDS in a human cadaver model. Eleven fresh-frozen cadaver hands were used. By using a tensiometer, data were gathered for tendon excursion, tendon load, and work of flexion. Changes in efficiency were caused by excision of annular pulleys A1, A2, A3, and the palmar aponeurotic pulley. We also measured the effect of FDP excision on FDS efficiency. Sectioning of the A2 and A3 pulleys together caused statistically significant losses of efficiency in all three parameters (work, load, and excursion). When the FDP was removed from a finger with an intact pulley system, losses in both work and excursion efficiencies were significant. Removing the FDP while cutting different pulleys caused significant decrease in FDS excursion efficiency. We conclude that A2 and A3 are the most important pulleys for maintaining normal FDS function, and that the presence of the FDP in the digital sheath is essential for optimal FDS excursion efficiency.