Electronic properties of the interface between p-CuI and anatase-phase n-TiO2 single crystal and nanoparticulate surfaces: A photoemission study

We present a study of the growth of the p-type inorganic semiconductor CuI on n-type TiO2 anatase single crystal (101) surfaces and on nanoparticulate anatase surfaces using synchrotron radiation photoemission spectroscopy. Core level photoemission data obtained using synchrotron radiation reveal that both the substrate (TiO2) and the overlayer (CuI) core levels shift to a lower binding energy to different degrees following the growth of CuI on TiO2. Valence band photoemission data show that the valence band maximum of the clean substrate differs from that of the dosed surface which may be interpreted qualitatively as due to the introduction of a new density of states within the band gap of TiO2 as a result of the growth of CuI. The valence band offset for the heterojunction n-TiO2p-CuI has been measured using photoemission for both nanoparticulate and single crystal TiO2 surfaces, and the band energy alignment for these heterojunction interfaces is presented. With the information obtained here, it is suggested that the interface between p-CuI and single crystal anatase-phase n-TiO2 is a type-II heterojunction interface, with significant band bending. The measured total band bending matches the work function change at the interface, i.e., there is no interface dipole. In the case of the nanoparticulate interface, an interface dipole is found, but band bending within the anatase nanoparticles remains quite significant. We show that the corresponding depletion layer may be accommodated within the dimension of the nanoparticles. The results are discussed in the context of the functional properties of dye-sensitized solid state solar cells.

Low-dose postoperative aprotinin reduces mediastinal drainage and blood product use in patients undergoing primary coronary artery bypass grafting who are taking aspirin: a prospective, randomized, double-blind, placebo-controlled trial

BACKGROUND

Although low-dose aprotinin administered after cardiopulmonary bypass has been reported to reduce mediastinal blood loss and blood product requirements in patients not taking aspirin, it is unknown whether low-dose postoperative aprotinin has any beneficial effects in patients undergoing coronary artery bypass operations who are at high risk of excessive postoperative bleeding and increased transfusion requirements because of aspirin use until just before the operation.

METHODS

Fifty-five patients undergoing primary coronary artery operations with cardiopulmonary bypass who continued taking aspirin (150 mg/d) until the day before the operation were enrolled in a prospective, randomized, double-blind trial to receive a single dose of either placebo (n = 29) or 2 x 10(6) kallikrein inhibiting units of aprotinin (n = 26) at the time of sternal skin closure.

RESULTS

Patients in the aprotinin group had a lower rate (28 +/- 18 vs 43 +/- 21 mL/h [mean +/- standard deviation], P <.005) and total volume of mediastinal drainage (955 +/- 615 vs 1570 +/- 955 mL, P <.007), as well as a shorter duration of mediastinal drain tube insertion (24.4 +/- 13.8 vs 31.3 +/- 16.5 hours, P <.05). In addition, a smaller proportion of patients receiving aprotinin required a blood product (31% vs 62%, P =.03), resulting in a reduction in the use of packed cells by 47% (P =.05), platelets by 77% (P =.01), fresh frozen plasma by 88% (P =.03), and total blood products by 68% (P =.01) in this group.

CONCLUSIONS

These results suggest that postoperative administration of low-dose aprotinin in patients taking aspirin until just before primary coronary artery operations with cardiopulmonary bypass not only reduces the rate and total amount of postoperative mediastinal blood loss but also lowers postoperative blood product use.

Dynamic complex wave-front modulation with an analog spatial light modulator

A method of producing an arbitrary complex field modulation by use of two pixels of an analog ferroelectric spatial light modulator (SLM) is demonstrated. The method uses the gray-scale modulation capabilities of a SLM to spatially encode the complex data on two pixels. A spatial filter is used to remove the carrier signal. This technique gives fast gray-level amplitude and phase modulation.

Experimental implementation of a Wiener filter in a hybrid digital--optical correlator

We present the implementation of a clutter-tolerant filter in a hybrid correlator system. Wiener filters were mapped with a complex encoding technique onto a smectic A(*) liquid-crystal spatial light modulator (SLM). The technique overcomes the problem of representing high-dynamic-range data on SLM's that have limited modulation capabilities. It also provides a compact image recognition system that is robust enough for many real-world applications. Experimental results are presented.

Prophylactic intravenous mannitol and normal saline in patients with poor renal function prior to cardiac surgery: Time for a multicentre trial?

BACKGROUND

Postoperative acute renal failure requiring dialysis has a poor prognosis, which has remained unaltered for 50 years. Therefore, in cardiac surgical patients at increased risk of postoperative oliguric acute renal failure (preoperative serum creatinine >0.13 mmol/L), we assessed the use of prophylactic intravenous (i.v) 20% mannitol and normal saline therapy in addition to traditional methods of therapeutic renal support.

METHODS

Seventy-five patients with a mean preoperative serum creatinine of 0.192 mmol/L received i.v. 20% mannitol and normal saline pre-, intra- and postoperatively. This treatment was continued postoperatively until serum creatinine returned to baseline.

RESULTS

No patient required dialysis, no patient died, developed a myocardial infarction nor a stroke in the first 30 days post-surgery. Serum creatinine and urea increased to a mean peak on day 3 of 0.233 +/- 94 and 24.6 +/- 13 mmol/L, respectively. However, all patients maintained a high urine output (>2 L/day) and no patient required haemodialysis.

CONCLUSION

Therapy with i.v. 20% mannitol and normal saline appears safe and effective in maintaining a diuresis and may avoid the need for dialysis. A randomised controlled trial of this treatment in patients at increased risk of postoperative acute renal failure is warranted.

Two-pixel computer-generated hologram with a zero-twist nematic liquid-crystal spatial light modulator

We present a method of producing a computer-generated hologram by use of a zero-twist linear nematic liquid-crystal spatial light modulator. A 2x1 macro pixel method is used; one pixel represents the real data, and one, the imaginary. A method is shown that produces both positive and negative analog amplitude modulation.

Microfabrication by use of a spatial light modulator in the ultraviolet: experimental results

We report the development of a new microstereophotolithography technique for creation of three-dimensional microcomponents by use of a planar, layer-by-layer process of exposure, in which a spatial light modulator is used as a dynamic lithographic mask. The system operates in the UV to take advantage of the wide supply of commercially available photopolymers designed for conventional stereolithography. With this novel procedure it is possible to build components with feature sizes as small as a few micrometers. The experimental setup is briefly described, and the first microcomponent fabricated by this system is shown.

UV Microstereolithography System that uses Spatial Light Modulator Technology

A new stereophotolithography technique utilizing a spatial light modulator (SLM) to create three-dimensional components with a planar, layer-by-layer process of exposure is described. With this procedure it is possible to build components with dimensions in the range of 50 mum-50 mm and feature sizes as small as 5 mum with a resolution of 1 mum. A polysilicon thin-film twisted nematic SVGA SLM is used as the dynamic photolithographic mask. The system consists of eight elements: a UV laser light source, an optical shutter, beam-conditioning optics, a SLM, a multielement reduction lens system, a high-resolution translation stage, a control system, and a computer-aided-design system. Each of these system components is briefly described. In addition, the optical characteristics of commercially available UV curable resins are investigated with nondegenerate four-wave mixing. Holographic gratings were written at a wavelength of 351.1 nm and read at 632.8 nm to compare the reactivity, curing speed, shrinkage, and resolution of the resins. These experiments were carried out to prove the suitability of these photopolymerization systems for microstereolithography.