Unraveling wall conditioning effects on plasma facing components in NSTX-U with the Materials Analysis Particle Probe (MAPP)

A novel Plasma Facing Components (PFCs) diagnostic, the Materials Analysis Particle Probe (MAPP), has been recently commissioned in the National Spherical Torus Experiment Upgrade (NSTX-U). MAPP is currently monitoring the chemical evolution of the PFCs in the NSTX-U lower divertor at 107 cm from the tokamak axis on a day-to-day basis. In this work, we summarize the methodology that was adopted to obtain qualitative and quantitative descriptions of the samples chemistry. Using this methodology, we were able to describe all the features in all our spectra to within a standard deviation of ±0.22 eV in position and ±248 s^-1 eV in area. Additionally, we provide an example of this methodology with data of boronized ATJ graphite exposed to NSTX-U plasmas.

In situ measurement of low-Z material coating thickness on high Z substrate for tokamaks

Rutherford backscattering of energetic particles can be used to determine the thickness of a coating of a low-Z material over a heavier substrate. Simulations indicate that 5 MeV alpha particles from an (241)Am source can be used to measure the thickness of a Li coating on Mo tiles between 0.5 and 15 μm thick. Using a 0.1 mCi source, a thickness measurement can be accomplished in 2 h of counting. This technique could be used to measure any thin, low-Z material coating (up to 1 mg/cm(2) thick) on a high-Z substrate, such as Be on W, B on Mo, or Li on Mo. By inserting a source and detector on a moveable probe, this technique could be used to provide an in situ measurement of the thickness of Li coating on NSTX-U Mo tiles. A test stand with an alpha source and an annular solid-state detector was used to investigate the measurable range of low-Z material thicknesses on Mo tiles.

Note: Electrostatic detection of stainless steel dust particles for fusion applications

Dust accumulation inside next-step fusion devices poses a significant safety concern and dust diagnostics will be needed to assure safe operations. An electrostatic dust detection device has been successfully demonstrated in the National Spherical Torus Experiment, Tore Supra, and the Large Helical Device, and the detector's response to carbon particles was previously characterized in laboratory experiments. This paper presents laboratory results showing that detection of stainless steel particles at levels as low as several μg/cm(2) is also possible.

Deuterium uptake in magnetic-fusion devices with lithium-conditioned carbon walls

Lithium wall conditioning has lowered hydrogenic recycling and dramatically improved plasma performance in many magnetic-fusion devices. In this Letter, we report quantum-classical atomistic simulations and laboratory experiments that elucidate the roles of lithium and oxygen in the uptake of hydrogen in amorphous carbon. Surprisingly, we show that lithium creates a high oxygen concentration on a carbon surface when bombarded by deuterium. Furthermore, surface oxygen, rather than lithium, plays the key role in trapping hydrogen.

Materials analysis and particle probe: a compact diagnostic system for in situ analysis of plasma-facing components (invited)

The objective of the materials analysis particle probe (MAPP) in NSTX is to enable prompt and direct analysis of plasma-facing components exposed to plasma discharges. MAPP allows multiple samples to be introduced to the level of the plasma-facing surface without breaking vacuum and analyzed using X-ray photoelectron spectroscopy (XPS), ion-scattering and direct recoil spectroscopy, and thermal desorption spectroscopy (TDS) immediately following the plasma discharge. MAPP is designed to operate as a diagnostic within the ∼12 min NSTX minimum between-shot time window to reveal fundamental plasma-surface interactions. Initial calibration demonstrates MAPP's XPS and TDS capabilities.

Simultaneous imaging/reflectivity measurements to assess diagnostic mirror cleaning

Practical methods to clean ITER's diagnostic mirrors and restore reflectivity will be critical to ITER's plasma operations. We describe a technique to assess the efficacy of mirror cleaning techniques and detect any damage to the mirror surface. The method combines microscopic imaging and reflectivity measurements in the red, green, and blue spectral regions and at selected wavelengths. The method has been applied to laser cleaning of single crystal molybdenum mirrors coated with either carbon or beryllium films 150-420 nm thick. It is suitable for hazardous materials such as beryllium as the mirrors remain sealed in a vacuum chamber.

High-resolution time-resolved extreme ultraviolet spectroscopy on NSTX

We report on upgrades to the flat-field grazing-incidence grating spectrometers X-ray and Extreme Ultraviolet Spectrometer (XEUS) and Long-Wavelength Extreme Ultraviolet Spectrometer (LoWEUS), at the National Spherical Torus Experiment (NSTX) at the Princeton Plasma Physics Laboratory. XEUS employs a variable space grating with an average spacing of 2400 lines/mm and covers the 9-64 Å wavelength band, while LoWEUS has an average spacing of 1200 lines/mm and is positioned to monitor the 90-270 Å wavelength band. Both spectrometers have been upgraded with new cameras that achieve 12.5 ms time resolution. We demonstrate the new time resolution capability by showing the time evolution of iron in the NSTX plasma.

Continuous improvement of H-mode discharge performance with progressively increasing lithium coatings in the National Spherical Torus Experiment

Lithium wall coatings have been shown to reduce recycling, improve energy confinement, and suppress edge localized modes in the National Spherical Torus Experiment. Here, we show that these effects depend continuously on the amount of predischarge lithium evaporation. We observed a nearly monotonic reduction in recycling, decrease in electron transport, and modification of the edge profiles and stability with increasing lithium. These correlations challenge basic expectations, given that even the smallest coatings exceeded that needed for a nominal thickness of the order of the implantation range.

Evaluation of an electrostatic dust removal system with potential application in next-step fusion devices

The ability to manage inventories of carbon, tritium, and high-Z elements in fusion plasmas depends on means for effective dust removal. A dust conveyor, based on a moving electrostatic potential well, was tested with particles of tungsten, carbon, glass, and sand. A digital microscope imaged a representative portion of the conveyor, and dust particle size and volume distributions were derived before and after operation. About 10 mm(3) volume of carbon and tungsten particles were moved in under 5 s. The highest driving amplitude tested of 3 kV was the most effective. The optimal driving frequency was 210 Hz (maximum tested) for tungsten particles, decreasing to below 60 Hz for the larger sand particles. Measurements of particle size and volume distributions after 10 and 100 cycles show the breaking apart of agglomerated carbon and the change in particle distribution over short timescales (<1 s).

Note: He puff system for dust detector upgrade

Local detection of surface dust is needed for the safe operation of next-step magnetic fusion devices such as ITER. An electrostatic dust detector, based on a grid of interlocking circuit traces biased to 50 V, has been developed to detect dust on remote surfaces and was successfully tested for the first time on the National Spherical Torus Experiment. In this note, we report a helium puff system that clears residual dust from this detector and any incident debris or fibers that might cause a permanent short circuit. Two consecutive helium puffs delivered by three 0.45 mm nozzles at an angle of 30° cleared the entire 5 cm × 5 cm surface of the detector.

Experimental setup for tungsten transport studies at the NSTX tokamak

Tungsten particles have been introduced into the National Spherical Torus Experiment (NSTX) in Princeton with the purpose to investigate the effects of tungsten injection on subsequent plasma discharges. An experimental setup for the study of tungsten particle transport is described where the particles are introduced into the tokamak using a modified particle dropper, otherwise used for lithium-powder injection. An initial test employing a grazing-incidence extreme ultraviolet spectrometer demonstrates that the tungsten-transport setup could serve to infer particle transport from the edge to the hot central plasmas of NSTX.

First real-time detection of surface dust in a tokamak

The first real-time detection of surface dust inside a tokamak was made using an electrostatic dust detector. A fine grid of interlocking circuit traces was installed in the NSTX vessel and biased to 50 V. Impinging dust particles created a temporary short circuit and the resulting current pulse was recorded by counting electronics. The techniques used to increase the detector sensitivity by a factor of ×10,000 to match NSTX dust levels while suppressing electrical pickup are presented. The results were validated by comparison to laboratory measurements, by the null signal from a covered detector that was only sensitive to pickup, and by the dramatic increase in signal when Li particles were introduced for wall conditioning purposes.

Dust measurements in tokamaks (invited)

Dust production and accumulation present potential safety and operational issues for the ITER. Dust diagnostics can be divided into two groups: diagnostics of dust on surfaces and diagnostics of dust in plasma. Diagnostics from both groups are employed in contemporary tokamaks; new diagnostics suitable for ITER are also being developed and tested. Dust accumulation in ITER is likely to occur in hidden areas, e.g., between tiles and under divertor baffles. A novel electrostatic dust detector for monitoring dust in these regions has been developed and tested at PPPL. In the DIII-D tokamak dust diagnostics include Mie scattering from Nd:YAG lasers, visible imaging, and spectroscopy. Laser scattering is able to resolve particles between 0.16 and 1.6 microm in diameter; using these data the total dust content in the edge plasmas and trends in the dust production rates within this size range have been established. Individual dust particles are observed by visible imaging using fast framing cameras, detecting dust particles of a few microns in diameter and larger. Dust velocities and trajectories can be determined in two-dimension with a single camera or three-dimension using multiple cameras, but determination of particle size is challenging. In order to calibrate diagnostics and benchmark dust dynamics modeling, precharacterized carbon dust has been injected into the lower divertor of DIII-D. Injected dust is seen by cameras, and spectroscopic diagnostics observe an increase in carbon line (CI, CII, C(2) dimer) and thermal continuum emissions from the injected dust. The latter observation can be used in the design of novel dust survey diagnostics.

Characteristics of the first H-mode discharges in the national spherical torus experiment

We report observations of the first low-to-high ( L-H) confinement mode transitions in the National Spherical Torus Experiment. The H-mode energy confinement time increased over reference discharges transiently by 100-200%, as high as approximately 100 ms. This confinement time is approximately 2 times higher than predicted by a multimachine scaling. Thus the confinement time of spherical tori has been extended to a record high value, leading to an eventual revision of confinement scalings. Finally, the power threshold for H-mode access is >10x higher than predicted by an international scaling from conventional aspect-ratio tokamaks, which could lead to new understanding of H-mode transition dynamics.

Effects of high-preference single-digit mathematics problem completion on multiple-digit mathematics problem performance

The purpose of this study was to examine the effects of a sequence of three single-digit (1 digit x 1 digit) multiplication problems on the latency to initiate multiple-digit (3 digit x 3 digit) multiplication problems for 2 students in an alternative education school. Data showed that (a) during the preference assessment, both students selected the single-digit problems in a majority of the sessions, and (b) intervention resulted in a decrease in latency between problems for both students. Results are discussed in relation to using high-preference sequences to promote behavioral momentum in academic content areas.

Charge-coupled-device detection of soft x rays for grazing-incidence spectrometers

We describe calculations of the sensitivity of CCD's to soft x rays incident at grazing angles. Soft-x-ray spectrometers based on a Rowland-circle geometry have a focal plane and hence detector surface at grazing incidence to the soft × rays. We model the penetration of the grazing-incidence soft × rays to the sensitive region of the CCD and predict the charge-collection efficiency as a function of wavelength. The results show significant advantages over microchannel plate intensified detection.

Effects of response and trial repetition on sight-word training for students with learning disabilities

Alternating treatments designs were used to compare the effects of trial repetition (one response within five trials per word) versus response repetition (five response repetitions within one trial per word) on sight-word acquisition for 3 elementary students diagnosed with specific learning disabilities in reading. Although both interventions occasioned the same number of accurate responses per word during training, the trial-repetition condition, which involved complete antecedent-response-feedback sequences, resulted in more words mastered for all 3 students.

A comparison of fast-rate, slow-rate, and silent previewing interventions on reading performance

Researchers investigated the effects of three different previewing interventions on the oral reading rates of 12 junior and senior high school students with learning disabilities. Under fast-rate listening previewing (FRLP), students were instructed to follow silently as experimenters read from a text at an average rate that was 77.7% faster than the students' current oral reading rate. During slow-rate listening previewing (SRLP), students followed along as experimenters read at an average rate that was 22.5% faster than the students' reading rate. Students were instructed to read passages silently under silent previewing (SP). Immediately following each previewing intervention, students read the same passage aloud. The number of words read correctly per minute and the number of errors per minute served as dependent variables. The results showed statistically significant decreases in error rates under SRLP and SP. The results also showed that SRLP resulted in statistically significantly fewer errors per minute than FRLP. These results suggest that orally reading while students follow along at a rate much higher than their current reading rates may not be as beneficial as reading aloud at slower rates.

High-sensitivity stimulated-emission detector for soft-x-ray laser research

A novel, extremely sensitive system for the detection of stimulated emission is proposed. The principle of the detection method relies on the major difference between stimulated and spontaneous emission, its directionality. A unique feature of the system is the use of a separate spontaneous-emission source. The system is predicted to be sensitive to gain-length products down to 0.1 and below, a capability that would be useful in media in which stimulated emission is weak compared with spontaneous emission. This will have important applications to the development of soft-x-ray lasing in novel systems.

Soft x-ray lasers and their applications

The emerging technology of soft x-ray lasers has novel applications to microscopy, lithography, and other fields. This article describes the status of soft x-ray laser research with the aim of bringing the rapid developments in this field to the attention of potential users in other disciplines. The different techniques for generating a population inversion and producing a soft x-ray laser are reviewed. The status of current research in the field and the near-term prospects are described. It is expected that the range of potential applications of soft x-ray lasers will increase as their performance improves. Work aimed at increasing the output power and progressing to shorter wavelengths with these devices is also reviewed.

Gain measurements at 18.22 nm in C VI generated by a Nd:glass laser

We present recent gain measurements in C VI at 18.22 nm for a soft-x-ray amplifier produced by a line-focused glass laser (1.053 microm) on a solid carbon target. The maximum gain measured was 8 +/- 2 cm(-1) in the recombining plasma column, with additional radiation cooling, with additional radiation cooling by iron impurities.