Practical training using BEWE aimed at improving the diagnosis ability of erosive tooth wear for dental students-A randomized trial

INTRODUCTION

Erosive tooth wear (ETW) has been gaining attention due to its high prevalence. However, ETW clinical diagnosis is difficult and may go unnoticed by many professionals. The present study aimed to develop, implement and evaluate a theoretical-practical training using active methodologies in the development of undergraduate students' skills for the diagnosis of ETW compared to the traditional teaching method.

MATERIALS AND METHODS

This randomized controlled study involved two parallel groups: control group (n = 22), with learning based only on theoretical content and test group (n = 24), learning by theoretical-practical activity mediated by monitors/tutors. The theoretical class covered the current concepts of ETW, aetiology, diagnosis, use of the BEWE index, prevention and treatment. The practical training included exercises and discussions based on the diagnosis using BEWE scores of a collection of images and extracted teeth. To evaluate the efficacy of the teaching-learning methods, a theoretical multiple-choice questionnaire and a practical test using images and extracted teeth were applied. The outcome was the number of correct answers. Groups were compared by Mann-Whitney (theoretical knowledge) and T tests (practical ability in diagnosis) (p < .05).

RESULTS

There was no significant difference between groups in the theoretical evaluation (p = .866). The test group showed higher ability to diagnose ETW lesions compared to the control group in the practical tests (p = .001). The performance of ETW diagnosis was similar when images were used in comparison to extracted teeth (p = .570).

CONCLUSION

The practical activity associated with theoretical classes can be a promising strategy to improve the development of undergraduate students' skills in the diagnosis of ETW.

Are S-PRG composites able to resist against erosive and abrasive challenges and protect surrounding enamel in situ?

OBJECTIVES

This study evaluated the resistance of S-PRG (Surface Pre-Reacted Glass-ionomer) composites and other restorative materials against erosive and abrasive challenges and their protective effect on enamel adjacent to the restorations.

MATERIALS AND METHODS

Bovine enamel blocks were prepared and randomized into 12 groups, including 6 types of material, each of them subjected to erosion_e or erosion+abrasion_ea: Beautifil II (S-PRG); Beautifil Bulk Restorative (S-PRG); Filtek Z250 XT; Filtek Bulk Fill; EQUIA Forte; Riva Light Cure. Cavities were prepared in the middle of enamel blocks and restored with the materials. Initial profiling measurement was performed on the material and on adjacent enamel (100, 200, 300, 600 and 700 μm from the restoration margin). Palatal intraoral appliances with the restored enamel blocks were used by the volunteers (n = 10). During 5 days appliances were immersed in 2.5 % citric acid for 2 min; 6 × /day (erosion_e). For ea condition, blocks were brushed for 1 min after each acid immersion. Final profile assessment was performed. Data were analysed by two and three way ANOVA followed by Tukey's test (p < 0.05).

RESULTS

Material wear: Riva Light Cure showed the highest wear followed by EQUIA Forte and then all resin composites, including the ones with S-PRG (p = 0.000). Enamel wear: there was significant interaction among type of restorative material, wear condition and distance (p = 0.014), enamel around materials showed similar wear (p = 0.983) and the enamel subjected to ea exhibited highest wear (p = 0.000).

CONCLUSION

SPRG based composites showed resistance against erosive and abrasive challenges but were not able to protect enamel adjacent to the restorations.

CLINICAL SIGNIFICANCE

S-PRG composites exhibit resistance to material wear comparable to resin composites. However, they have shown an inability to effectively protect the adjacent enamel under in situ erosive-abrasive conditions, despite the presence of mineral-loss-preventing ions surrounding materials.

Erosion-inhibiting and enamel rehardening effects of different types of saliva

OBJECTIVES

The objective of this study was to assess the effects of in situ saliva compared to in vitro human saliva, with or without mucin, on inhibiting erosion and promoting enamel rehardening.

DESIGN

Bovine enamel blocks were randomly distributed into groups (n = 23): Gsitu (human saliva in situ), Gvitro (collected human saliva) and GvitroM (collected human saliva with mucin). The enamel blocks underwent a 2-hour period for the formation of salivary pellicle, based on the assigned groups. Subsequently, they were subjected to three erosive cycles, each of them consisting of an erosive challenge (immersion in 0.65 % citric acid, pH 3.5, 1 min) and saliva exposure (immersion in situ or in vitro saliva for 2 h). Microhardness measurements were performed at each cycle, after each experimental step (erosive challenge and exposure to saliva).

RESULTS

After the first demineralization, in vitro saliva groups presented greater hardness loss, with no statistical difference between GVitroM and GVitro. After the third erosive demineralization the in situ saliva resulted in less hardness loss compared to the first demineralization. In relation to surface hardness recovery, there was no difference among types of saliva but there was a decrease in hardness as the cycles progressed.

CONCLUSION

Saliva groups had different behaviors between the first and third demineralization, being similar after the third cycle in terms of hardness loss. Regarding hardness recovery, all saliva promoted enamel gain, but there was a gradual decrease with the progression of the cycles.

Revisiting the use of stainless steel crowns for treatment of molar-incisor hypomineralization: a case series

The restoration of teeth affected by molar-incisor hypomineralization (MIH) is challenging. To this end, preformed stainless steel crowns (SSCs) are a good option; however, their conventional use involves the removal of tooth structure. In the Hall technique, the SSC is seated over the primary teeth without caries removal or tooth preparation, aiming to seal carious lesions. This case series reports the use of SSCs in a similar way to the Hall technique for 3 pediatric patients with MIH. The high-caries-risk patient in case 1 lost hypomineralized enamel and developed a carious lesion immediately after eruption of a permanent first molar. The patient in case 2 complained of hypersensitivity associated with MIH of a first molar that had previously been restored. The patient in case 3 experienced atypical restoration failures in MIH-affected first molars. In all 3 cases, the use of SSCs without tooth preparation was an effective restorative treatment. Although this conservative treatment is a temporary solution, it provides good longevity and preserves tooth structure until the patient reaches physical and emotional/behavioral maturity for a definitive restoration.

S-PRG-based composites erosive wear resistance and the effect on surrounding enamel

This study evaluated Surface Pre-Reacted Glass-ionomer (S-PRG)-based-composites' surface resistance against erosive wear and their protective effect on surrounding enamel. Bovine enamel was randomized into 12 groups (n = 10/group) [erosion (e) or erosion + abrasion (a)]: nanohybrid-S-PRG-based composite (SPRGe/SPRGa), nanohybrid-S-PRG-based bulk-fill (SPRGBFe/SPRGBFa), nanoparticle-composite (RCe/RCa), nanohybrid-bulk-fill (BFe/BFa), Glass Hybrid Restorative System (GHRSe/GHRSa), and resin-modified glass-ionomer-cement (RMGICe/RMGICa). Cavities were prepared and restored. Initial profile assessment was performed on material and on adjacent enamel at distances of 100, 200, 300, 600, and 700 μm from margin. Specimens were immersed in citric acid (2 min; 6×/day for 5 days) for erosion. Erosion + abrasion groups were brushed for 1 min after erosion. Final profile assessment was performed. Two-way ANOVA and Tukey-test showed: for erosion, the GHRSe and RMGICe presented greater material wear compared to the other groups (p = 0.001); up to 300 μm away from restoration, GHRSe and SPRGBFe were able to prevent enamel loss compared to RMGICe and other composite groups (p = 0.001). For erosion + abrasion, none of the materials exhibited a significant protective effect and S-PRG-based groups showed lower wear than RMGICa and GHRSa, and higher wear than composites (p = 0.001). S-PRG-based-composites can diminish surrounding enamel loss only against erosion alone, similarly to GIC, with advantage of being a more resistant material.

Vitamin E: A potential preventive approach against dental erosion-an in vitro short-term erosive study

OBJECTIVES

This study evaluated the in vitro effect of different components of palm oil on enamel in a short-term erosive challenge.

METHODS

The acquired enamel pellicle (AEP) was previously formed in situ for 2 h. Subsequently, the bovine enamel blocks were treated in vitro according to following solutions: G1-palm oil; G2-85% tocotrienol solution; G3-oily vitamin E; G4-oily vitamin A; G5-deionized water (negative control); G6-stannous-containing solution (Elmex® Erosion Protection Dental Rinse) (positive control). After application of the treatment solutions (500 µl, 30 s), the blocks were immersed in 0.5% citric acid (pH 2.4) during 30 s (initial erosion). The response variable was the percentage of surface hardness loss. Data were analyzed by one-way ANOVA and Fisher's Test (p < 0.05).

RESULTS

The positive control (G6), palm oil (G1) and oily vitamin E (G3) groups presented the lowest percentage of surface hardness loss, and were statistically different from the negative group (G5) (p < 0.05), and no differences were found between these three groups. The 85% tocotrienol solution (G2) and oily vitamin A groups (G4) were not different to the negative control group.

CONCLUSIONS

Stannous-containing positive control (Elmex® Erosion Protection), palm oil and oily Vitamin E were able to protect enamel against the erosive challenge performed in this in vitro study. In addition, vitamin E is probably the key ingredient of palm oil responsible for preventing enamel erosion.

CLINICAL SIGNIFICANCE

Vitamin E presented similar preventive effect to a commercial mouthwash stannous-containing solution (Elmex® Erosion Protection) against initial erosion and, it can be considered as a promising natural alternative for the formulations of solutions aiming to prevent erosive tooth wear.

Impact of a simplified in situ protocol on enamel loss after erosive challenge

This study investigated the effect of the period of use and location of intraoral appliances on enamel surface loss. This randomized, single blind in situ study was conducted in 2 crossover phases based on the period of use, in which maxillary and mandibular appliances were simultaneously worn. Bovine enamel blocks (n = 120) were randomly divided among the studied groups by surface hardness. In each phase, fifteen volunteers used one maxillary appliance and two mandibular appliances for 5 days. Erosive challenge was performed 4X/day by immersion in 0.01 M HCL for 2 minutes. In the continuous phase, the intraoral appliances were worn for 20 hours. In the intermittent phase the appliances were worn for 8 hours and 30 minutes. Enamel loss was determined profilometrically. The discomfort of use of the appliances were evaluated in a questionnaire. Data were analyzed by two-way ANOVA/Tukey’s test and chi-square test (p<0.05). The maxillary appliance promoted higher enamel loss compared to the mandibular one (p<0.001). Intermittent use of appliances resulted in similar enamel loss to the continuous one (p = 0.686). All volunteers preferred to use the maxillary appliance in an intermittent regimen. The intermittent use of maxillary appliance is a simplified reliable protocol appropriated for in situ erosion studies in enamel.

O uso do protetor bucal nas artes marciais: consciência e atitude

Introdução: O uso de protetores bucais durante a prática de esportes de contato é de fundamental importância como medida preventiva dos traumatismos orofaciais.Objetivo: Realizar um levantamento quanto a utilização do protetor bucal entre praticantes de artes marciais, assim como verificar qual é a percepção que tais esportistas têm sobre sua importância e função.Métodos: Realizou-se uma pesquisa descritiva e transversal, de caráter investigativo, composta por 231 praticantes de três diferentes modalidades de artes marciais: Jiu-jítsu, Tae kwon do e Muay Thai, nas cidades de Nova Friburgo-RJ e Macaé-RJ, Brasil, por meio de um questionário estruturado. Os dados foram tabulados no programa estatístico SPSS 16.0. Foi realizada a frequência, sendo aplicado, ainda, o teste qui-quadrado (p<0,05), para estabelecer relação entre variáveis de interesse.Resultados: Os dados indicaram que 60,6% dos entrevistados nunca receberam informações sobre o traumatismo orofacial durante a prática esportiva e que 46,3% dos esportistas já sofreram algum tipo de traumatismo orofacial. A maioria dos atletas (93,9%) considera importante o uso do protetor bucal, porém este dado é desproporcional ao percentual de usuários do dispositivo: 78,7% noMuay Thai, 60,9% no Jiu-jítsu e 47,5% no Tae kwon do (p< 0,01). Dos protetores bucais existentes no mercado, o mais utilizado é o termoplástico ou tipo II (52,5%) em todas as modalidades de lutas avaliadas. O protetor bucal personalizado causou menor percentual de interferência no rendimento durante a prática esportiva quando comparado com os outros tipos de protetores (p<0,07).Conclusão: A maioria dos esportistas reconhece a importância do uso do protetor bucal, apesar de relatar não ter recebido informações sobre traumatismo orofacial durante a prática esportiva; a maioria dos atletas utiliza o protetor bucal termoplástico; há necessidade de se difundir informações sobre as vantagens do uso do protetor bucal personalizado, assim como, estimular o uso por parte de todos os praticantes de artes marciais.