Iatrogenic salivary duct injury in head and neck cancer patients: Report of four cases and review of the literature

Introduction: The lesions of the salivary ducts may be idiopathic, post- traumatic, or iatrogenic and lead to sialocele formation with persistent painful facial swelling or cutaneous fistula formation. No consensus on treatment of this condition exists: the options of treatment include needle aspiration, pressure dressings, antisialogogue therapy, radiotherapy, botulinum toxin and surgical approaches as duct repair, diversion, ligation, different drainage systems and even parotidectomy/submaxilectomy. The management and special features of iatrogenic salivary duct injury in patients with oral cancer who underwent head and neck reconstructive surgery has not been described yet. Material and Methods: We present four cases of iatrogenic lesions of salivary ducts and its management in patients with oral cancer. Conclusions: The iatrogenic lesions of salivary ducts are to be taken into account in patients with oral cancer as the distal ends of salivary ducts could be involved in the margins of surgical resection. Different options of treatment of this complication are described.

Key words:Sialocele, oral cancer, salivary duct.

Mitochondrial mitophagy protection combining rivaroxaban and aspirin in high glucose-exposed human coronary artery endothelial cell. An in vitro study

PURPOSE

Combination of Rivaroxaban plus Aspirin improved cardiovascular outcome in patients with stable cardiovascular disease. The aim was to determine if Rivaroxaban and acetylsalicylic acid alone or in combination may protect mitochondrial mitophagy in human coronary artery endothelial cells (HCAEC) exposed to D-glucose.

METHODS

HCAEC were incubated under different conditions: 5 mmol/L glucose D-glucose (control), 30 mmol/L D-Glucose with and without 50 nmol/L Rivaroxaban (Rivaroxaban), 0.33 mmol/L ASA (ASA) or Rivaroxaban (12.5 nmol/L)+ASA (0.33 mmol/L; (Riva+ASA).

RESULTS

HCAEC incubated with D-glucose showed an increased Factor Xa expression. The mitochondrial content of Pink-1 and Parkin were significantly reduced in high glucose-incubated HCAEC compared to control. Rivaroxaban+ASA significantly increased the mitochondrial content of Pink-1 and Parkin, and the mitochondrial membrane potential compared to D-Glucose group. Both ASA alone and Riva+ASA reduced reactive oxygen species (ROS) and tissue factor production induced by high glucose exposure.

CONCLUSION

Under high glucose condition combining Rivaroxaban+ASA increased the mitochondrial content of Pink-1 and Parkin, restored mitochondria membrane potential and reduced ROS and tissue factor expression in HCAEC. It suggests potential effects induced by dual use of Rivaroxaban and ASA on the coronary endothelium subjected to high glucose condition.

Computer-Assisted Dental Implant Placement Following Free Flap Reconstruction: Virtual Planning, CAD/CAM Templates, Dynamic Navigation and Augmented Reality

Image-guided surgery, prosthetic-based virtual planning, 3D printing, and CAD/CAM technology are changing head and neck ablative and reconstructive surgical oncology. Due to quality-of-life improvement, dental implant rehabilitation could be considered in every patient treated with curative intent. Accurate implant placement is mandatory for prosthesis long-term stability and success in oncologic patients. We present a prospective study, with a novel workflow, comprising 11 patients reconstructed with free flaps and 56 osseointegrated implants placed in bone flaps or remnant jaws (iliac crest, fibula, radial forearm, anterolateral thigh). Starting from CT data and jaw plaster model scanning, virtual dental prosthesis was designed. Then prosthetically driven dental implacement was also virtually planned and transferred to the patient by means of intraoperative infrared optical navigation (first four patients), and a combination of conventional static teeth supported 3D-printed acrylic guide stent, intraoperative dynamic navigation, and augmented reality for final intraoperative verification (last 7 patients). Coronal, apical, and angular deviation between virtual surgical planning and final guided intraoperative position was measured on each implant. There is a clear learning curve for surgeons when applying guided methods. Initial only-navigated cases achieved low accuracy but were comparable to non-guided freehand positioning due to jig registration instability. Subsequent dynamic navigation cases combining highly stable acrylic static guides as reference and registration markers result in the highest accuracy with a 1–1.5-mm deviation at the insertion point. Smartphone-based augmented reality visualization is a valuable tool for intraoperative visualization and final verification, although it is still a difficult technique for guiding surgery. A fixed screw-retained ideal dental prosthesis was achieved in every case as virtually planned. Implant placement, the final step in free flap oncological reconstruction, could be accurately planned and placed with image-guided surgery, 3D printing, and CAD/CAM technology. The learning curve could be overcome with preclinical laboratory training, but virtually designed and 3D-printed tracer registration stability is crucial for accurate and predictable results. Applying these concepts to our difficult oncologic patient subgroup with deep anatomic alterations ended in comparable results as those reported in non-oncologic patients.

Primary stability and PES/WES evaluation for immediate implants in the aesthetic zone: a pilot clinical double-blind randomized study

The use of immediate implants in the aesthetic area is a technique widely used in modern implantology. The characteristics of the patient, the implant, and the surgical procedure used may influence the final results. The aim was to assess whether the implant design affects primary (P.S.) and secondary stability (S.S.), bone level (B.L.), and PES/WES evaluation. Twenty implants with two different designs (n = 10) were immediately placed and randomly located in the upper anterior maxilla with no grafting material. Implant-Stability-Quotient (ISQ), B.L., and Pink-Esthetic-Score/White-Esthetic-Score (PES/WES) were evaluated. Shapiro–Wilk normality test was performed to determine the sample normality, as the data did not follow a normal distribution, the Wilcoxon-Mann–Whitney test was applied (p < 0.05). ISQ was determined at placement (PS): control 59.1 (C.I.54.8–63.3); experimental 62.2(C.I.60.1–64.2) and three months after placement (SS): control 62.2.1 (C.I.53.3–71.0); experimental 67.2(C.I.65.8–68.5). The BL was measured at three months after placement: control 0.38 mm (C.I.− 0.06 to  + 0.83); experimental 0.76 mm (C.I.0.33–1.19) and at 12 months post-loading: control 0.07 mm (C.I.− 0.50–0.65); experimental 0.90 mm (C.I.0.38–1.42). PES/WES values were evaluated for the control group: 15 (C.I.12.68–17.32), and for the experimental group 15.20 (C.I.11.99–18.41). No significant differences were shown between both implant designs. A good grade of osseointegration and primary/secondary stability was achieved, as well as proper maintenance of crestal bone and adequate PES/WES scores. The criteria for selection for the ideal patient for immediate implant placement is essential.

ClinicalTrials Protocol ID: NCT04343833.

Aggressive Late Recurrence of a Calcifying Epithelial Odontogenic Tumor: Surgical Refinements Based on New Technologies

A calcifying epithelial odontogenic tumor is a rare, benign odontogenic neoplasm. Surgical treatment is the option, and late recurrence is very rare. Radiologically, the lesions are commonly present scattered calcifications. This case report details a 64-year-old female patient with a recurrence of a right mandibular calcifying epithelial odontogenic tumor 2 decades after successful initial surgical removal. A segmental mandibulectomy and immediate reconstruction were performed using a planned vascularized free fibula flap with virtual surgery, custom reconstruction plate, and intraoperative computed tomography. Modifications were made to the design of the reconstruction plate to improve the cervicofacial profile and subsequent rehabilitation with dental implants. Fully guided implant surgery with point-of-care manufacturing protocol was done to improve prosthetically driven implant planning. The case presented highlights the usefulness of new technologies for mandibular reconstruction with the free fibula flap and the concept of point-of-care with technical notes that increase precision and reduce morbidity in implant-supported rehabilitation.

Dynamic Trends in Surgical Oromaxillofacial Trauma Epidemiology: A Comparative Study of Pre-COVID-19 and COVID-19 Periods in Tertiary Referral Hospitals in Madrid

Introduction: The COVID-19 pandemic has induced profound societal and healthcare transformations globally. Material and methods: This multicenter retrospective study aimed to assess potential shifts in the epidemiology and management of oromaxillofacial trauma requiring surgical intervention over a 1-year period encompassing the onset of the COVID-19 pandemic, in comparison to the preceding year. The parameters investigated included age, sex, injury mechanisms, fractured bones, and treatment modalities. The statistical significance was set at p < 0.05. Results: A notable 39.36% reduction in oromaxillofacial fractures was identified (p < 0.001), with no significant alterations in sex distribution, types of fractured bones, or treatment modalities. An appreciable increase in mean age was observed (35.92 vs. 40.26) (p = 0.006). Analysis of the causes of oromaxillofacial trauma revealed diminished incidents of interpersonal violence (41% vs. 35%) and sports-related injuries (14% vs. 8%), alongside an escalation in cases attributed to falls (27% vs. 35%), precipitation events (2% vs. 5%), and traffic accidents (12% vs. 13%). The mandible emerged as the most frequently fractured bone. Conclusion: In conclusion, the COVID-19 pandemic has decreased the number of maxillofacial fractures treated surgically and has changed the epidemiology and the etiology of facial traumas.

Proportional Condylectomy for the Treatment of Unilateral Condylar Hyperplasia With Maloclussion: Role of Point-of-Care Manufacturing Surgical Guides and Intraoperative Computed Tomography to Avoid Secondary Orthognatic Surgery

Condylar hyperplasia (CH) is a complex, usually unilateral pathology affecting the jaw, leading to facial asymmetry and malocclusion. Its etiology is unclear, with potential links to endocrine disorders, trauma, and genetic factors. Unilateral condylar hyperplasia (UCH) typically presents in young patients but can occur at any age. Common symptoms include progressive facial asymmetry, malocclusion, and temporomandibular joint dysfunction. Diagnostic imaging like single positron emission computed tomography helps assess condylar activity. Treatment aims to halt condylar growth and correct facial asymmetry, commonly through high condylectomy, which involves removing the upper 3 to 5 mm of the condylar head. Recently, proportional condylectomy, using point-of-care manufacturing 3-dimensional-cutting guides and intraoperative computed tomography control, has shown promising results, potentially eliminating the need for orthognathic surgery. This technique was successfully applied in a case involving a 29-year-old woman, resulting in normalized occlusion and aesthetics after subsequent orthodontic treatment, with stable outcomes 1-year post-treatment.

Survival rate of odontogenic descending necrotizing mediastinitis. Our experience in last 5 years

BACKGROUND

Descending necrotising mediastinitis is one of the most lethal and least frequent forms of mediastinitis. It is a life-threatening infection most frequently originating from an oropharyngeal or odontogenic infection.

MATERIAL AND METHODS

A retrospective study of 6 patients diagnosed and treated for descending necrotising mediastinitis between 2015 and 2020 is reported.

RESULTS

All patients were male, mean age of 34.83 years; 66% were smokers. 83% had an orocervical infection and 34% had initial mediastinal spread. All patients were treated initially with empirical broad-spectrum antibiotics and surgical drainage, with subsequent admission to the Intensive Care Unit; only one of them required tracheostomy. The mean hospital stay was 27.37 days. After a mean follow-up of 6 months, 100% of the cases had a complete recovery.

CONCLUSIONS

Early diagnosis and surgical treatment combined with improved life-support treatment in intensive care units and broad-spectrum antibiotic therapy leads to a decrease in associated mortality.

Microcystic Adnexal Carcinoma. A Rare Entity

Background

Microcystic adnexal carcinoma is a rare malignant tumour derived from sweat glands, locally aggressive, but with low rate of lymphatic or metastatic spread. Tends to affect the deep dermis, without affection of epidermis. Surgery remains as the first line treatment.

Case Report

We present a case of a 46-year-old woman with a slow growing lesion of the upper lip, with biopsy diagnosis of microcystic adnexal carcinoma. She underwent a resection and reconstruction with local advancement flaps. The final anatomopathological study showed an adnexal epithelial neoplasm with imprecise borders, poorly delimited, non-encapsulated, growing in plaque-like formation from the superficial dermis into the adipose tissue, perineural invasion, without epidermal infiltration.

Discussion

It is an extremely rare malignant tumour, appearing as a solitary papule or plaque affecting the central face, that often affect middle-aged caucasic, female patients. Usual local aggressive nature, characterized by small nests and strands of cells in deep dermis and perineural-invasion images, absent in superficial tissue. An incisional biopsy is need to make a correct diagnosis. Due to its rarity there is no consensus on the best management and follow-up. The microcystic adnexal carcinoma should be taken into consideration in the differential diagnosis. Key words:Microcystic adnexal carcinoma, lip, histopathology.