Digital biosensor for human cerebrospinal fluid detection with single-use sensing strips

Leakage of human cerebrospinal fluid (CSF) caused by trauma or other reasons presents exceptional challenges in clinical analysis and can have severe medical repercussions. Conventional test methods, including enzyme-linked immunosorbent assay and immunofixation electrophoresis testing, typically are performed at a few clinical reference laboratories, which may potentially delay proper diagnosis and treatment. At the same time, medical imaging can serve as a secondary diagnosis tool. This work presented here reports the use of a point-of-care electrochemical sensor for detection of beta-2-transferrin (B2T), a unique isomer of transferrin that is present exclusively in human CSF but is absent in other bodily fluids. Limits of detection were examined via serial dilution of human samples with known B2T concentrations down to 7 × 10^-12 g B2T/ml while maintaining excellent sensitivity. Nine human samples with varying levels of B2T were compared using up to 100 times dilution to confirm the validity of sensor output across different patient samples.

In Vitro Corrosion of SiC-Coated Anodized Ti Nano-Tubular Surfaces

Peri-implantitis leads to implant failure and decreases long-term survival and success rates of implant-supported prostheses. The pathogenesis of this disease is complex but implant corrosion is believed to be one of the many factors which contributes to progression of this disease. A nanostructured titanium dioxide layer was introduced using anodization to improve the functionality of dental implants. In the present study, we evaluated the corrosion performance of silicon carbide (SiC) on anodized titanium dioxide nanotubes (ATO) using plasma-enhanced chemical vapor deposition (PECVD). This was investigated through a potentiodynamic polarization test and bacterial incubation for 30 days. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to analyze surface morphologies of non-coated and SiC-coated nanotubes. Energy dispersive X-ray (EDX) was used to analyze the surface composition. In conclusion, SiC-coated ATO exhibited improved corrosion resistance and holds promise as an implant coating material.

Nanostructured Surfaces to Promote Osteoblast Proliferation and Minimize Bacterial Adhesion on Titanium

The objective of this study was to investigate the potential of titanium nanotubes to promote the proliferation of human osteoblasts and to reduce monomicrobial biofilm adhesion. A secondary objective was to determine the effect of silicon carbide (SiC) on these nanostructured surfaces. Anodized titanium sheets with 100-150 nm nanotubes were either coated or not coated with SiC. After 24 h of osteoblast cultivation on the samples, cells were observed on all titanium sheets by SEM. In addition, the cytotoxicity was evaluated by CellTiter-BlueCell assay after 1, 3, and 7 days. The samples were also cultivated in culture medium with microorganisms incubated anaerobically with respective predominant periodontal bacteria viz. Porphyromonas gingivalis, Treponema denticola, and Tannerella forsythia as monoinfection at 37 °C for 30 days. The biofilm adhesion and coverage were evaluated through surface observation using Scanning Electron Microscopy (SEM). The results demonstrate that Ti nanostructured surfaces induced more cell proliferation after seven days. All groups presented no cytotoxic effects on human osteoblasts. In addition, SEM images illustrate that Ti nanostructured surfaces exhibited lower biofilm coverage compared to the reference samples. These results indicate that Ti nanotubes promoted osteoblasts proliferation and induced cell proliferation on the surface, compared with the controls. Ti nanotubes also reduced biofilm adhesion on titanium implant surfaces.

Fast SARS-CoV-2 virus detection using disposable cartridge strips and a semiconductor-based biosensor platform

Detection of the SARS-CoV-2 spike protein and inactivated virus was achieved using disposable and biofunctionalized functional strips, which can be connected externally to a reusable printed circuit board for signal amplification with an embedded metal-oxide-semiconductor field-effect transistor (MOSFET). A series of chemical reactions was performed to immobilize both a monoclonal antibody and a polyclonal antibody onto the Au-plated electrode used as the sensing surface. An important step in the biofunctionalization, namely, the formation of Au-plated clusters on the sensor strips, was verified by scanning electron microscopy, as well as electrical measurements, to confirm successful binding of thiol groups on this Au surface. The functionalized sensor was externally connected to the gate electrode of the MOSFET, and synchronous pulses were applied to both the sensing strip and the drain contact of the MOSFET. The resulting changes in the dynamics of drain waveforms were converted into analog voltages and digital readouts, which correlate with the concentration of proteins and virus present in the tested solution. A broad range of protein concentrations from 1 fg/ml to 10 μg/ml and virus concentrations from 100 to 2500 PFU/ml were detectable for the sensor functionalized with both antibodies. The results show the potential of this approach for the development of a portable, low-cost, and disposable cartridge sensor system for point-of-care detection of viral diseases.

Color perceptibility and validity of silicon carbide-based protective coatings for dental ceramics

STATEMENT OF PROBLEM

A silicon carbide (SiC) protective coating has been developed for dental ceramics, but whether the coated ceramics can match the classical VITA shades is unclear.

PURPOSE

The purpose of this observational in vitro study was to evaluate the color adaptability of SiC-coated dental ceramics by testing the hypotheses that SiC-coated disks can be fabricated to match standard tooth shades and have a perceptible color match rate of at least 50% for disks with a color difference (ΔE)<2.0. The effects of ΔE, shade hue, shade value, observer sex, years of experience, profession, and shade guide orientation on color perception were studied.

MATERIAL AND METHODS

SiC-coated disks were fabricated to color match (ΔE_ab<3.3) all 16 VITA classical shades. Uncoated disks of each VITA shade were used as the reference materials to determine whether the SiC-coated disks were color matched to the classical VITA shade guide. Three ΔE formulas (76, 94, and 2000) were applied and compared. Participants (N=120) with an average of 22 years of experience included dental school students, dental faculty members, and dental assistants. Pseudoisochromatic plate and the Farnsworth D-15 Panel test for assessing color deficiency and color blindness were administered. Participants then attempted to match SiC-coated disks to standard shade guides arranged by value or hue. All spectrophotometer readings and color matching were conducted in a light booth with standardized daylight illumination. Statistical analysis used the Fisher's exact test to determine factors associated with improved matching performance (α=.05).

RESULTS

A significant difference in color match rate was found between disks with ΔE<2.0 (63.9%) and ΔE≥2.0 (41.7%) (P<.001). Arranging shade by value (72.2%) instead of hue (67.2%) produced better color matching (P<.001). Sex (P=.430), profession (P=.708), and years of experience (P=.902) had no significant influence on color matching.

CONCLUSIONS

SiC-coated disks were successfully fabricated to match all VITA classical shades, and clinical visual color matching results confirmed that ΔE was a useful metric in optimizing color matching for the SiC-coated dental ceramics.

Novel Coatings to Minimize Corrosion of Titanium in Oral Biofilm

The aim of this work is to investigate the effects produced by polymicrobial biofilm (Porphyromonas gingivalis, Streptococcus mutans, Streptococcus sanguinis, and Streptococcus salivarius) on the corrosion behavior of titanium dental implants. Pure titanium disks were polished and coated with titanium nitride (TiN) and silicon carbide (SiC) along with their quarternized versions. Next, the disks were cultivated in culture medium (BHI) with P. gingivalis, S. mutans, S. sanguinis, and S. salivarius and incubated anaerobically at 37 °C for 30 days. Titanium corrosion was evaluated through surface observation using Scanning Electron Microscope (SEM) and Atomic Force Microscopy (AFM). Furthermore, the Ti release in the medium was evaluated by Inductively Coupled Plasma Mass Spectrometry (ICP-MS). SEM images showed that coated Ti disks exhibited lower corrosion compared to non-coated disks, except for the quartenized TiN. This was confirmed by AFM, where the roughness was higher in non-coated Ti disks. ICP showed that Ti levels were low in all coating disks. These results indicate that these SiC and TiN-based coatings could be a useful tool to reduce surface corrosion on titanium implant surfaces.

The Galvanic Effect of Titanium and Amalgam in the Oral Environment

The effects of the presence of amalgam on titanium (Ti) dissolution in the oral environment under acidic, neutral, and basic conditions was studied. The presence of amalgam was found to suppress Ti release under acidic conditions due to the redeposition of TiO_x/SnO_x on the surface of the Ti. The redeposition of SnO_x was due to the amalgam releasing its components (Hg, Cu, Sn, Ag) and the thermodynamic preference of Sn to oxidize, which was confirmed using mass measurements, ICP-MS analyses, and X-ray Photoelectron Spectroscopy (XPS). XPS depth profiling was performed to characterize the composition and oxidation states of the redeposited SnO_x/TiO_x film. Under basic conditions, the amalgam hindered Ti dissolution, but no redeposition of amalgam components was observed for the Ti.

Novel Coatings to Minimize Bacterial Adhesion and Promote Osteoblast Activity for Titanium Implants

Titanium nitride (TiN) and silicon carbide (SiC) adhesion properties to biofilm and the proliferation of human osteoblasts were studied. Quaternized titanium nitride (QTiN) was produced by converting the surface nitrogen on TiN to a positive charge through a quaternization process to further improve the antibacterial efficiency. The SiC required a nitridation within the plasma chamber of the surface layer before quaternization could be carried out to produce quaternized SiC (QSiC). The antimicrobial activity was evaluated on the reference strains of Porphyromonas gingivalis for 4 h by fluorescence microscopy using a live/dead viability kit. All the coatings exhibited a lower biofilm coverage compared to the uncoated samples (Ti—85.2%; TiN—24.22%; QTiN—11.4%; SiC—9.1%; QSiC—9.74%). Scanning Electron Microscope (SEM) images confirmed the reduction in P. gingivalis bacteria on the SiC and TiN-coated groups. After 24 h of osteoblast cultivation on the samples, the cell adhesion was observed on all the coated and uncoated groups. Fluorescence images demonstrated that the osteoblast cells adhered and proliferated on the surfaces. TiN and SiC coatings can inhibit the attachment of Porphyromonas gingivalis and promote osteoblast adhesion on the titanium used for implants. These coatings may possess the ability to prevent the development of peri-implantitis and stimulate osteointegration.

Annealing and N2 Plasma Treatment to Minimize Corrosion of SiC-Coated Glass-Ceramics

To improve the chemical durability of SiC-based coatings on glass-ceramics, the effects of annealing and N₂ plasma treatment were investigated. Fluorapatite glass-ceramic disks were coated with SiC via plasma-enhanced chemical vapor deposition (PECVD), treated with N₂ plasma followed by an annealing step, characterized, and then immersed in a pH 10 buffer solution for 30 days to study coating delamination. Post-deposition annealing was found to densify the deposited SiC and lessen SiC delamination during the pH 10 immersion. When the SiC was treated with a N₂ plasma for 10 min, the bulk properties of the SiC coating were not affected but surface pores were sealed, slightly improving the SiC’s chemical durability. By combining N₂ plasma-treatment with a post-deposition annealing step, film delamination was reduced from 94% to 2.9% after immersion in a pH 10 solution for 30 days. X-ray Photoelectron spectroscopy (XPS) detected a higher concentration of oxygen on the surface of the plasma treated films, indicating a thin SiO₂ layer was formed and could have assisted in pore sealing. In conclusion, post-deposition annealing and N₂ plasma treatment where shown to significantly improve the chemical durability of PECVD deposited SiC films used as a coating for glass-ceramics.

Anti-Bacterial Properties and Biocompatibility of Novel SiC Coating for Dental Ceramic

A 200 nm plasma-enhanced chemical vapor-deposited SiC was used as a coating on dental ceramics to improve anti-bacterial properties for the applications of dental prosthesis. A thin SiO₂ (20 nm) in the same system was deposited first, prior to SiC deposition, to improve the adhesion between SiC to dental ceramic. Silane and methane were the precursors for SiC deposition, and the SiO₂ deposition employed silane and nitrous oxide as the precursors. SiC antimicrobial activity was evaluated on the proliferation of biofilm, Streptococcus sanguinis, and Streptococcus mutans on SiC-coated and uncoated dental ceramics for 24 h. The ceramic coating with SiC exhibited a biofilm coverage of 16.9%, whereas uncoated samples demonstrated a significantly higher biofilm coverage of 91.8%, measured with fluorescence and scanning electron microscopic images. The cytotoxicity of the SiC coating was evaluated using human periodontal ligament fibroblasts (HPdLF) by CellTiter-BlueCell viability assay. After 24 h of HPdLF cultivation, no obvious cytotoxicity was observed on the SiC coating and control group; both sets of samples exhibited similar cell adhesion and proliferation. SiC coating on a ceramic demonstrated antimicrobial activity without inducing cytotoxic effects.

Novel Coating to Minimize Corrosion of Glass-Ceramics for Dental Applications

The effect of a novel silicon carbide (SiC) coating on the chemical durability of a fluorapatite glass-ceramic veneer was investigated by examining weight loss and ion release levels. The hypothesis that this novel coating will exhibit significant corrosion resistance was tested. Inductively coupled plasma atomic emission spectrometer (ICP) was used for ion concentration determination and scanning electron microscopy (SEM) for surface morphology analyses. Samples were immersed in pH 10 and pH 2 buffer solutions to represent extreme conditions in the oral cavity. Analyses were done at 15 and 30 days. The SiC coated group demonstrated significant reduction in weight loss across all solutions and time points (p < 0.0001). Ion release analyses demonstrated either a marginally lower or a significantly lower release of ions for the SiC-coated disks. SEM analysis reveals planarization of surfaces by the SiC-coated group. The surfaces of coated samples were not as corroded as the non-coated samples, which is indicative of the protective nature of these coatings. In conclusion, SiC is a novel coating that holds promise for improving the performance of ceramic materials used for dental applications.

Demonstration of SiO2/SiC based protective coating for dental ceramic prostheses

SiO₂/SiC coatings were deposited onto ceramics disks using plasma enhanced chemical vapor deposition. The effects of deposition pressure and gas-flow ratio on the refractive index, extinction coefficient, and SiC composition were studied. For the highest studied SiH₄ to CH₄ gas-flow ratio of 1.5, the refractive index increased by 17% from 2.53 (at the wavelength of 845 nm) to 2.96 (at the wavelength of 400 nm). For the lowest studied SiH₄ to CH₄ gas-flow ratio of 0.5, the refractive index only increased by 4% from 2.11 (at the wavelength of 845 nm) to 2.20 (at the wavelength of 400 nm). At higher deposition pressures, the variation in refractive index of the SiC coatings was significantly lower showing a slight increase from 1.93 (at a wavelength of 845 nm) to 1.96 at a wavelength of 400 nm. Except for the case of a low SiH₄ to CH₄ gas-flow ratio of 0.5, for light with wavelengths ≤ 650 nm, the extinction coefficient of the SiC coatings increased significantly. Light with a wavelength > 650 nm had an extinction coefficient near 0 in all cases. After annealing the sample at 400°C for 4 hours, hydrogen-related bonds broke and the stress of the film was reduced from -245 to -71 MPa. By utilizing different thicknesses of SiC, the full standard dental shade guide was matched with the ΔE of each coated disk being less than 3.3 compared to the shade guide.

Radiotherapy and local control in rectal cancer

Recurrence is a stage in the natural history of rectal cancer. Preoperative radiotherapy or postoperative radiochemotherapy lower the rate of recurrence, improving local control. From 1980 to 1997, at the "Divisione di Radioterapia" of the "Università Cattolica del S. Cuore" of Rome 380 patients with rectal cancer of early clinical stage T2-3, candidates for surgery for cure, underwent radiation therapy. 119 patients underwent postoperative radiotherapy (45-50 Gy); 45 patients underwent "sandwich" radiotherapy (45 Gy:27 Gy before and 28 Gy after surgery), of whom 7 were treated with preoperative radiotherapy alone; 145 patients underwent preoperative concomitant radiochemotherapy according to 3 different protocols, radiotherapy (38 Gy) combined with mitomycin C and 5-FU; radiotherapy (50.4 Gy) combined with cisplatin and 5-FU; radiotherapy (45 Gy) combined with 5-FU and folinic acid. 71 patients were treated with preoperative radiotherapy (38 Gy) combined with IORT (10 Gy). Median follow-up was 6 years. Overall local control was 85% at 3 years, 83% at 5 years, 81% at 10 years. The rate of local control at 5 years was: 76% for postoperative radiotherapy, 83% for "sandwich" radiotherapy, 84% for preoperative radiochemotherapy and 93% for preoperative radiotherapy combined with IORT. Local control was shown to be significantly better with preoperative treatment as compared to postoperative treatment (p = 0.02). The incidence of metastases was 35% in the patients with local recurrence and 16% in those with local control. The difference in survival was highly significant in patients with local control as compared to those with local recurrence: at 5 years 87% and 32% respectively. Patients with local control showed a lower incidence of metastasis and a better survival.

Bone marrow micrometastases in a patient with localized Wilms' tumor

The case of a 7-year-old boy presenting at diagnosis with a localized (stage III) Wilms' tumor of favorable histology is presented. Immunocytologic analysis of bone marrow aspirates revealed cells positive for neural cell adhesion molecule (NCAM) and negative for class I major histocompatibility complex (MHC) antigens. These cells were interpreted as deriving from the tumor blastemal component. Postoperatively the child underwent radiotherapy and chemotherapy, and he remains free of disease 12 months after completion of therapy. In patients with nonmetastatic Wilms' tumor at onset, the evaluation of the actual frequency of occult marrow involvement and the assessment of its clinical significance may necessitate further investigation.