Are Cementoblasts a Subpopulation of Osteoblasts or a Unique Phenotype?

Experimental studies have shown a great potential for periodontal regeneration. The limitations of periodontal regeneration largely depend on the regenerative potential at the root surface. Cellular intrinsic fiber cementum (CIFC), so-called bone-like tissue, may form instead of the desired acellular extrinsic fiber cementum (AEFC), and the interfacial tissue bonding may be weak. The periodontal ligament harbors progenitor cells that can differentiate into periodontal ligament fibroblasts, osteoblasts, and cementoblasts, but their precise location is unknown. It is also not known whether osteoblasts and cementoblasts arise from a common precursor cell line, or whether distinct precursor cell lines exist. Thus, there is limited knowledge about how cell diversity evolves in the space between the developing root and the alveolar bone. This review supports the hypothesis that AEFC is a unique tissue, while CIFC and bone share some similarities. Morphologically, functionally, and biochemically, however, CIFC is distinctly different from any bone type. There are several lines of evidence to propose that cementoblasts that produce both AEFC and CIFC are unique phenotypes that are unrelated to osteoblasts. Cementum attachment protein appears to be cementum-specific, and the expression of two proteoglycans, fibromodulin and lumican, appears to be stronger in CIFC than in bone. A theory is presented that may help explain how cell diversity evolves in the periodontal ligament. It proposes that Hertwig’s epithelial root sheath and cells derived from it play an essential role in the development and maintenance of the periodontium. The role of enamel matrix proteins in cementoblast and osteoblast differentiation and their potential use for tissue engineering are discussed.

The junctional epithelium: from health to disease

The junctional epithelium is located at a strategically important interface between the gingival sulcus, populated with bacteria, and the periodontal soft and mineralized connective tissues that need protection from becoming exposed to bacteria and their products. Its unique structural and functional adaptation enables the junctional epithelium to control the constant microbiological challenge. The antimicrobial defense mechanisms of the junctional epithelium, however, do not preclude the development of gingival and periodontal lesions. The conversion of the junctional to pocket epithelium, which is regarded as a hallmark in disease initiation, has been the focus of intense research in recent years. Research has shown that the junctional epithelial cells may play a much more active role in the innate defense mechanisms than previously assumed. They synthesize a variety of molecules directly involved in the combat against bacteria and their products. In addition, they express molecules that mediate the migration of polymorphonuclear leukocytes toward the bottom of the gingival sulcus. Periodontopathogens-such as Actinobacillus actinomycetemcomitans or, in particular, Porphyromonas gingivalis-have developed sophisticated methods to perturb the structural and functional integrity of the junctional epithelium. Research has focused on the direct effects of gingipains, cysteine proteinases produced by Porphyromonas gingivalis, on junctional epithelial cells. These virulence factors may specifically degrade components of the cell-to-cell contacts. This review will focus on the unique structural organization of the junctional epithelium, on the nature and functions of the various molecules expressed by its cells, and on how gingipains may attenuate the junctional epithelium's structural and functional integrity.

Cementogenesis reviewed: a comparison between human premolars and rodent molars

BACKGROUND

Cementum continues to be the least-known mineralized tissue. Although recent advances in the field of molecular biology have contributed to an understanding of the involvement of molecular factors in cementum formation during development and regeneration, cementogenesis on a cell biological basis is still poorly understood. Virtually nothing is known about cementoblast origin, differentiation, and the cell dynamics during normal development, repair, and regeneration. This review describes the recent findings of cementogenesis on roots of human premolars and opposes them to those of teeth from other mammals, particularly the rodent molar.

METHODS

Using light and electron microscopy, light microscopic radioautography, and various measurements, a comprehensive insight into the development and repair of cementum during and after root formation and tooth eruption has been achieved for human premolars.

RESULTS

Cementum is a highly responsive mineralized tissue. This biological activity is necessary for root integrity and for bringing and maintaining the tooth in its proper position. With regard to cementum formation and periodontal fiber attachment, considerable species-particularities exist that are mainly based on differences in growth rates and tooth sizes. Since root development and initial cementogenesis last on the average 5-7 years in human premolars, cementum formation in these teeth is characterized by along-lasting phase of prefunctional development, with occurs independent of principal periodontal fiber attachment to the root and which may take 5 years or more. The first molar of the rat, however, is in functional occlusion 3 1/2 weeks after the onset of root formation. Since initial cementum formation and periodontal fiber attachment to the root occur almost at the same time in this tooth, the distinction between cells associated with one or the other process is very difficult to achieve, and cementogenesis cannot be described independent of periodontal fiber attachment to the root. Therefore, the determination of cementoblast origin in the rodent molar may be intricate.

CONCLUSIONS

Taking into account these species differences, the current description on the origin and differentiation of cementoblasts is inconsistent and the description of cementogenesis is still incomplete. This review calls into question the currently held concept of cementogenesis and offers a possible alternative.

Resonance frequency analysis in relation to jawbone characteristics and during early healing of implant installation

OBJECTIVES

To monitor resonance frequency analysis (RFA) in relation to the jawbone characteristics and during the early phases of healing and incorporation of Straumann dental implants with an SLA surface.

MATERIAL AND METHODS

17 Straumann 4.1 mm implants (10 mm) and 7 Straumann 4.8 mm implants (10 mm) were installed and ISQ determined at baseline and after 1, 2, 3, 4, 5, 6, 8 and 12 weeks. Central bone cores were analyzed from the 4.1 mm implants using micro CT for bone volume density (BVD) and bone trabecular connectivity (BTC).

RESULTS

Pocket probing depths ranged from 2-4 mm and bleeding on probing from 5-20%. At baseline, BVD varied between 24% and 65% and BTC between 4.9 and 25.4 for the 4.1 mm implants. Baseline ISQ varied between 55 and 74 with a mean of 61.4. No significant correlations were found between BVD or BTC and ISQ Values. For the 4.8 mm diameter implants baseline ISQ values ranged from 57-70 with a mean of 63.3. Over the healing period ISQ values increased at 1 week and decreased after 2-3 weeks. After 4 weeks ISQ values, again increased slightly, no significant differences were noted over time. One implant (4.1 mm) lost stability at 3 weeks. Its ISQ value had dropped from 68 to 45. However the latter value was determined after the clinical diagnosis of instability.

CONCLUSION

ISQ values of 57-70 represented homeostasis and implant stability. However no predictive value for loosing implant stability can be attributed to RFA since the decrease occurred after the fact.

Does excessive occlusal load affect osseointegration? An experimental study in the dog

AIM

The purpose of this study was to evaluate the effect of excessive occlusal load following placement of titanium implants in the presence of healthy peri-implant mucosal tissues.

MATERIALS AND METHODS

Mandibular bilateral recipient sites in six Labrador dogs were established by extracting premolars and molars. After 3 months, two TPS (titanium plasma sprayed) implants and two SLA (sandblasted, large grit, acid etched) implants were placed on each side of the mandible in each dog. Three implants were lost in the initial healing phase, leaving 45 implants for evaluation. Following 6 months of healing, gold crowns were placed on implants on the test side of the mandible. The crowns were in supra-occlusal contact with the opposing teeth in order to create excessive occlusal load. Implants on the control side were not loaded. Plaque control was performed throughout the experimental period. Clinical measurements and standardised radiographs were obtained at baseline and 1, 3 and 8 months after loading. At 8 months, the dogs were killed and histologic analyses were performed.

RESULTS

At 8 months, all implants were osseointegrated. The mean probing depth was 2.5+/-0.3 and 2.6+/-0.3 mm at unloaded and loaded implants, respectively. Radiographically, the mean distance from the implant shoulder to the marginal bone level was 3.6+/-0.4 mm in the control group and 3.7+/-0.2 mm in the test group. Control and test groups were compared using paired non-parametric analyses. There were no statistically significant changes for any of the parameters from baseline to 8 months in the loaded and unloaded implants. Histologic evaluation showed a mean mineralised bone-to-implant contact of 73% in the control implants and 74% in the test implants, with no statistically significant difference between test and control implants.

CONCLUSION

In the presence of peri-implant mucosal health, a period of 8 months of excessive occlusal load on titanium implants did not result in loss of osseointegration or marginal bone loss when compared with non-loaded implants.

Developmental appearance and distribution of bone sialoprotein and osteopontin in human and rat cementum

BACKGROUND

Bone sialoprotein (BSP) and osteopontin (OPN), two major noncollagenous proteins (NCPs) in collagen-based mineralized tissues, have been implicated in mineral deposition and cell- and matrix-matrix interactions during root development. However, their role in cementogenesis is still a subject of debate. Since distribution of proteins is indicative of function, we have analyzed their temporo-spatial appearance in relation to that of cementum collagen.

METHODS

Human premolars and rat molars at various stages of root development characterized by differing rates of formation were fixed in aldehyde and embedded in epoxy and LR White resin. Sections were processed for ultrastructural analysis and postembedding colloidal gold (immuno)cytochemistry.

RESULTS

Incubations with antibodies against BSP and OPN and with lectins recognizing prominent sugars in these proteins generally revealed similar labeling patterns in both human and rat teeth, with gold particles accumulating mainly in the interfibrillar spaces. The lectin Helix pomatia, specific for N-acetyl-D-galactosamine, was distinctive in that it consistently reacted with human cementum, but only sporadically labeled rat cementum. Regardless of both the species and the stage of root development, mineralization initiated in mantle predentin in association with distinct foci immunoreactive for BSP and OPN. In human teeth, the deposition of cementum collagen began before the start of dentin mineralization and thus prior to any detectable labeling for BSP and OPN. However, at early stages of root formation in the rat, cementum collagen appeared after BSP and OPN accumulated on the root surface, whereas at advanced stages the deposition of cementum collagen, BSP and OPN coincided.

CONCLUSIONS

The temporo-spatial differences in the appearance of BSP and OPN relative to cementum collagen correlate well with known differences in the speed of root elongation and explain the variable appearance of the dentino-cemental junction. The data reveal no causal relationship between BSP and OPN and the differentiation of cementoprogenitor cells and indicate that the distribution of collagen fibrils ultimately determines the amount and pattern of accumulation of these NCPs. There also is no consistent planar accumulation of BSP and OPN between dentin and cementum such as the cement lines found between "old" and "new" bone. It is concluded that the interlacement of collagen fibrils at the dentino-cemental junction, across which mineralization spreads, represents the primary attachment mechanism between cementum and dentin.

Bone apposition to a titanium-zirconium alloy implant, as compared to two other titanium-containing implants

Implants made of commercially pure titanium (cpTi) are widely and successfully used in dentistry. For certain indications, diameter-reduced Ti alloy implants with improved mechanical strength are highly desirable. The aim was to compare the osseointegration of titanium-zirconium (TiZr) and cpTi implants with a modified sandblasted and acid-etched (SLActive) surface and with a Ti6Al4V alloy that was sand-blasted and acid-washed. Cylindrical implants with two, 0.75 mm deep, circumferential grooves were placed in the maxilla of miniature pigs and allowed to heal for 1, 2, 4 and 8 weeks. Undecalcified toluidine blue-stained ground sections were produced. Surface topography, area fraction of tissue components, and bone-to-implant contact (BIC) were determined. All materials showed significantly different surface roughness parameters. The amount of new bone within the implant grooves increased over time, without significant differences between materials. However, BIC values were significantly related to the implant material and the healing period. For TiZr and cpTi implants, the BIC increased over time, reaching values of 59.38 % and 76.15 % after 2 weeks, and 74.50 % and 84.67 % after 8 weeks, respectively. In contrast, the BIC for Ti6Al4V implants peaked with 42.29 % after 2 weeks followed by a decline to 28.60 % at 8 weeks. Significantly more surface was covered by multinucleated giant cells on Ti6Al4V implants after 4 and 8 weeks. In conclusion, TiZr and cpTi implants showed faster osseointegration than Ti6Al4V implants. Both chemistry and surface topography might have influenced the results. The use of diameter-reduced TiZr implants in more challenging clinical situations warrants further documentation in long-term clinical studies.

Osteogenic potential of autogenous bone grafts harvested with four different surgical techniques

The osteogenic potential of autogenous bone grafts is superior to that of allografts and xenografts because of their ability to release osteoinductive growth factors and provide a natural osteoconductive surface for cell attachment and growth. In this in vitro study, autogenous bone particles were harvested by four commonly used techniques and compared for their ability to promote an osteogenic response. Primary osteoblasts were isolated and seeded on autogenous bone grafts prepared from the mandibles of miniature pigs with a bone mill, piezo-surgery, bone scraper, and bone drill (bone slurry). The osteoblast cultures were compared for their ability to promote cell attachment, proliferation, and differentiation. After 4 and 8 hrs, significantly higher cell numbers were associated with bone mill and bone scraper samples compared with those acquired by bone slurry and piezo-surgery. Similar patterns were consistently observed up to 5 days. Furthermore, osteoblasts seeded on bone mill and scraper samples expressed significantly elevated mRNA levels of collagen, osteocalcin, and osterix at 3 and 14 days and produced more mineralized tissue as assessed by alizarin red staining. These results suggest that the larger bone graft particles produced by bone mill and bone scraper techniques have a higher osteogenic potential than bone slurry and piezo-surgery.

Immunodetection of enamel- and cementum-related (bone) proteins at the enamel-free area and cervical portion of the tooth in rat molars

Enamel and dentin at the cervical portion of the tooth are frequently covered by a collagen-free matrix referred to as acellular afibrillar cementum (AAC). It is believed that AAC deposition occurs when the enamel organ is displaced or disrupted, and mesenchymal cells from the dental follicle gain access to the tooth surface, differentiate into cementoblasts, and secrete noncollagenous proteins typically found in collagen-based mineralized tissues. A similar thin layer of mineralized matrix is found at the enamel-free area (EFA) of rodent molars, but in this case the matrix is covered by inner enamel epithelium (IEE) throughout development. We have, therefore, used this site as a paradigm to test the hypothesis that typical mesenchymal matrix proteins can also be found in association with epithelial cells. To this end, we have analyzed the presence and distribution of enamel- and cementum-related matrix proteins at the EFA and at the cervical portion of the tooth. Rat mandibular molars were processed for colloidal gold immunolabeling with antibodies to amelogenins, bone sialoprotein (BSP), osteopontin (OPN), osteocalcin (OC), and dentin sialoprotein (DSP), and the plasma proteins alpha 2 HS-glycoprotein and albumin. The EFA matrix was immunoreactive for amelogenins as well as for BSP, OPN, OC, and alpha 2 HS-glycoprotein, but not for albumin and DSP. The AAC was, similar to the EFA matrix, labeled for BSP, OPN, OC, and alpha 2 HS-glycoprotein. These data show for the first time that the EFA matrix is comprised of a mixture of enamel- and cementum-related proteins, a situation that parallels the distribution of matrix constituents at the cervical portion of the tooth. Since the EFA matrix is deposited on top of the mineralized dentin, and since the enamel organ seals off the forming matrix, it is concluded that EFA cells are responsible for the production of these proteins. Consistent with previous reports showing that epithelial cells can produce both BSP and OPN in some circumstances, the data also suggest that AAC may be deposited by cells of epithelial origin. Furthermore, they lend support to the possibility that cells derived from Hertwig's epithelial root sheath may likewise be capable of producing cementum matrix proteins.

Immunolocalization of epithelial and mesenchymal matrix constituents in association with inner enamel epithelial cells

After crown formation, the enamel organ reorganizes into Hertwig's epithelial root sheath (HERS). Although it is generally accepted that HERS plays an inductive role during root formation, it also has been suggested that it may contribute enamel-related proteins to cementum matrix. By analogy to the enamel-free area (EFA) in rat molars, in which epithelial cells express not only enamel proteins but also "typical" mesenchymal matrix constituents, it has been proposed that HERS cells may also have the potential to produce cementum proteins. To test this hypothesis, we examined the nature of the first matrix layer deposited along the cervical portion of root dentin and the characteristics of the associated cells. Rat molars were processed for postembedding colloidal gold immunolabeling with antibodies to amelogenin (AMEL), ameloblastin (AMBN), bone sialoprotein (BSP), and osteopontin (OPN). To minimize the possibility of false-negative results, several antibodies to AMEL were used. The labelings were compared with those obtained at the EFA. Initial cementum matrix was consistently observed at a time when epithelial cells from HERS covered most of the forming root surface. Cells with mesenchymal characteristics were rarely seen in proximity to the matrix. Both the EFA matrix and initial cementum exhibited collagen fibrils and were intensely immunoreactive for BSP and OPN. AMEL and AMBN were immunodetected at the EFA but not over the initial cementum proper. These two proteins were, however, present at the cervical-most portion of the root where enamel matrix extends for a short distance between dentin and cementum. These data suggest that epithelial cells along the root surface are likely responsible for the deposition of the initial cementum matrix and therefore, like the cells at the EFA, may be capable of producing mesenchymal proteins.

Initiation of acellular extrinsic fiber cementum on human teeth. A light- and electron-microscopic study

The development of acellular extrinsic fiber cementum (AEFC) has never before been studied in human teeth. We have therefore examined the initiation of AEFC in the form of a collagenous fiber fringe and its attachment to the underlying dentinal matrix, in precisely selected, erupting human premolars with roots developed to 50%-60% of their final length. Freshly extracted teeth were prefixed in Karnovsky's fixative, decalcified in EDTA and subdivided into about 10 blocks each, cut from the mesial and distal root surfaces, vertical to and along the root axis. The blocks were postfixed in osmium tetroxide, embedded in Epon and cut for light- and electron-microscopic investigation. Starting at the advancing edge of the root, within a region extending about 1 mm coronal to this edge, fibroblast-like cells were seen closely covering the external root surface. Along the first 100 microns from the root edge, these cells extended cytoplasmic processes and contacted the dentinal collagen fibrils. Between these cells and the dentinal matrix, new collagen fibrils and very short collagen fibers gradually developed. Within the second 100 microns from the root edge, this resulted in the formation of a cell-fiber fringe network. Newly formed fibers of the fringe were directly attached to the non-mineralized matrix containing dentinal collagen fibrils and could be distinguished from the latter by differences in fibril orientation. During the process of dentin mineralization, the transitional zone between the fiber-fringe base and the dentinal matrix, i.e., the future dentino-cemental junction, also mineralized. It is suggested that this fiber fringe is the base of AEFC, which later increases in thickness by fiber extension and subsequent mineralization.

Bioengineered periodontal tissue formed on titanium dental implants

The ability to use autologous dental progenitor cells (DPCs) to form organized periodontal tissues on titanium implants would be a significant improvement over current implant therapies. Based on prior experimental results, we hypothesized that rat periodontal ligament (PDL)-derived DPCs can be used to bioengineer PDL tissues on titanium implants in a novel, in vivo rat maxillary molar implant model. Analyses of recovered implants revealed organized PDL tissues surrounding titanium implant surfaces in PDL-cell-seeded, and not in unseeded control, implants. Rat PDL DPCs also exhibited differentiative potential characteristic of stem cells. These proof-of-principle findings suggest that PDL DPCs can organize periodontal tissues in the jaw, at the site of previously lost teeth, indicating that this method holds potential as an alternative approach to osseointegrated dental implants. Further refinement of this approach will facilitate the development of clinically relevant methods for autologous PDL regeneration on titanium implants in humans.

How repair cementum becomes attached to the resorbed roots of human permanent teeth

Human premolars extracted for orthodontic reasons were fixed with a mixture of formaldehyde and glutaraldehyde and processed for light and transmission electron microscopy. About 15% of all available teeth showed signs of superficial root resorption. Quantitatively, the resorption lacunae were more frequent at the apical third of the root, when compared to the mid-root and the cervical levels. Qualitatively, the resorption areas appeared as shallow irregular concavities. The degree of resorption and/or repair varied considerably both within and between sites, ranging from arrested resorption to advanced repair. An about 1- to 2-microns-thick seam of exposed collagen fibrils of the residual dentinal matrix lined the resorbed root surfaces in the arrested stage of resorption. A particular class of mononuclear cells repopulated these surfaces and commenced to attach newly produced collagenous matrix fibrils to the exposed dentinal matrix. Increasing fibril formation and bundling resulted in a collagenous fiber fringe oriented perpendicular to the bottom of Howship's lacunae. Following the implantation and establishment of this initial fiber fringe, the junctional zone between the two matrices and further portions of the repair matrix became progressively obscured by a fine granular and electron-dense material, indicating the advancing front of mineralization. In addition, the junctional zone later attained a high degree of electron density and basophilia. Subsequently formed matrix derived from cementoblasts was structurally heterogeneous and resembled cellular intrinsic fiber cementum (CIFC). It is suggested that the initially produced matrix along resorbed root surfaces closely resembles that seen during initial formation of acellular extrinsic fiber cementum (AEFC), whereas further apposition results in a tissue with the characteristics of CIFC.

Establishment of acellular extrinsic fiber cementum on human teeth. A light- and electron-microscopic study

The present study describes for the first time the development of early acellular extrinsic fiber cementum (AEFC) until its establishment on human teeth. Precisely selected premolars with roots developed to 50%-100% of their final length were prefixed in Karnovsky's fixative and most of them were decalcified in EDTA. Their roots were subdivided into about 10 blocks each, cut from the mesial and distal root surfaces. Following osmication, these blocks were embedded in Epon and sectioned for light- and transmission electron microscopy. Some blocks were cut non-demineralized. From semithin stained sections, the density of the collagenous fiber fringe protruding from the root surface was measured by using the Videoplan-system. After initiation of this fiber fringe and its attachment to the dentinal root surface followed by mineralization, the fringe gradually increased in length and subsequently became mineralized. Fringe elongation and the advancement of the mineralization front appeared to progress proportionally. Thus, in all stages of AEFC development, a short fiber fringe covered the mineralized AEFC. Its density remained constant, irrespective of AEFC thickness. The latter gradually increased and reached an early maximum of 15-20 microns in the cervical region. At this stage, the AEFC fringe appeared to fuse with the future dentogingival or other collagen fibers of the tooth supporting apparatus. Mineralization of the fringe commenced with isolated, spherical or globular centers, which later fused with the mineralization front and became incorporated in AEFC.

Initial formation of cellular intrinsic fiber cementum in developing human teeth. A light- and electron-microscopic study

The present study describes the formative process of the initiation of cellular intrinsic fiber cementum (CIFC) in still growing human teeth. From 29 premolars and molars with incomplete roots developed to 60-90% of their final length, 8 premolars (with roots formed to three quarters of their final length) were selected for electron-microscopic investigation. All teeth were clinically intact and prefixed in Karnovsky's fixative immediately after extraction. Most of them were decalcified in ethylene diaminetetraacetic acid (EDTA), and the apical part of the roots was divided axially into mesial and distal portions that were subdivided in about 5 slices each. Following osmication and embedding in Epon, these blocks were cut for light- and electron-microscopic examination. In addition, 5 teeth with incomplete roots were freed from organic material and processed for scanning electron microscopy. It was found that CIFC-initiation commenced very close to the advancing root edge and resulted in a rapid cementum thickening. Thereafter, appositional growth continued on the already established cementum surface. Large, basophilic and rough endoplasmic reticulum-rich cementoblasts, some of which became cementocytes, were responsible for both fast and slow CIFC-formation. The CIFC-matrix was free of Sharpey's fibers and composed of more or less organized intrinsic collagen fibrils, in part fibril bundles, that ran roughly parallel to the root surface. Initially, the cementum fibrils intermingled with those of the dentinal collagen fibrils, which were not yet mineralized. This boundary subsequently underwent calcification. The development of collagen fibril bundles and their extracellular arrangement were associated with cytoplasmic processes probably involved in fibril formation and fibril assembly. Many cementoblasts contained intracytoplasmic, membrane-bounded collagen fibrils, which probably were related to fibril formation rather than degradation.

Growth of acellular extrinsic fiber cementum (AEFC) and density of inserting fibers in human premolars of adolescents

The present study describes for the first time the changes of both AEFC thickness and the numerical density of collagen fibers inserting into AEFC at specified levels and sites of human premolars at different stages of development. The investigation was based on 45 premolars (25 maxillary, 20 mandibular; 25 first and 20 second), extracted from adolescents and young adults. All teeth were free of disease and presented with roots developed from 30-100% of their final length. They were prefixed in Karnovsky's fixative, decalcified in EDTA and subdivided into about 14 slices each, cut from mesial and distal root surfaces, vertical to and along the root axis. The slices were postfixed in OsO4, embedded in Epon and cut for light-microscopic study. AEFC thickness (4086 measurements) and the density of the collagenous fiber fringe (454 counts) inserting in AEFC were measured at 1, 3, 5 and 7 mm apical to the cementoenamel junction. The data obtained showed: AEFC thickness increased with age and varied between 0 and 57.5 microns. Between 9 and 17 years, cervical AEFC thickness increased in maxillary first premolars from an average of 5 to 30 microns, and in mandibular second premolars from 6 to 20 microns, i.e., AEFC grew at approximately the same rate as later in life. Depending on the differences in tooth development, AEFC on maxillary first premolars became thicker than that on mandibular second premolars. Due to the corono-apically decreasing gradient of AEFC development, its increase in mid-root regions lagged behind that in cervical regions of all teeth in people younger than about 14 yr.(ABSTRACT TRUNCATED AT 250 WORDS)

Attempts to label matrix synthesis of human root cementum in vitro

The present study describes the dynamic process of both acellular extrinsic (AEFC) and acellular/cellular intrinsic fiber cementum (AIFC/CIFC) matrix production on growing human teeth. Selected erupting maxillary and mandibular premolars with roots grown to about 70%-95% of their final length were placed in organ culture immediately following extraction. Twelve teeth for short-time labeling were pulse-incubated for 15 min in medium containing 3H-proline and chased for various times in order to follow the migration and secretion of the tracer. Eight teeth for long-time incubation were labeled continuously for 5 h before being chased for 1-8 days in order to label cementum matrix accumulation. After decalcification in ethylene diaminetetraacetic acid (EDTA), their roots were subdivided into about 20 slices each. Epon-embedded sections were prepared for light- and electron-microscopic as well as autoradiographic examination. During CIFC-formation, cementoblasts revealed high intracytoplasmic silver grain concentrations within the first hour after 3H-proline administration. The release of the tracer occurred between 60 to 120 min after administration. After 2 h, cementoblasts and the cementum matrix appeared to be labeled about equally. After 5 h, most of the labeled proteins appeared to be localized in the cementoid. Silver grains increased in number over the cementum matrix from 5-24 h. Very high intracellular grain concentrations within very large cementoblasts corresponded to regions of rapid cementum formation. Tracer-halos around entrapped cells lend support to a multipolar mode of matrix production during CIFC-initiation. The fate of the tracer during the development of early AEFC-matrix was less clear. However, fibroblasts revealed dense intracytoplasmic grain accumulations within the first hour after 3H-proline administration. Thereafter, the tracer localization was vague. This indistinct grain localization reflected the particular mode of AEFC-matrix production characterized by addition of new fibril segments to pre-existing fibers of a collagenous fringe.

Healing of localized gingival recessions treated with a coronally advanced flap alone or combined with an enamel matrix derivative and a porcine acellular dermal matrix: a preclinical study

OBJECTIVE

This study aimed to evaluate the effects of a porcine acellular dermal matrix (PADM) with or without an enamel matrix derivative (EMD) on gingival recession defects treated with a coronally advanced flap (CAF) in dogs.

MATERIALS AND METHODS

Miller class II gingival recession defects (5 mm wide and 7 mm deep) were surgically created on the labial side of bilateral maxillary canines in 12 dogs. After 8 weeks of plaque accumulation, the 24 chronic defects were randomly assigned to one of the following 4 treatments: CAF, CAF with PADM (CAF/PADM), CAF with EMD (CAF/EMD), and CAF with EMD and PADM (CAF/EMD/PADM). The animals were sacrificed 10 weeks after surgery for histologic evaluation.

RESULTS

In all groups, root coverage was obtained to a varying degree. PADM was well incorporated in gingival connective tissue in the CAF/PADM and in the CAF/EMD/PADM groups. The height of newly formed bone was significantly greater in the CAF/EMD/PADM group than in the CAF and CAF/PADM groups. New cementum with periodontal ligament-like tissue was predominantly found in the CAF/EMD and CAF/EMD/PADM groups. The CAF/EMD/PADM group showed the greatest amount of new cementum among the groups examined, although the difference was not statistically significant.

CONCLUSION

Within the limitations of the present study, it can be concluded that CAF/EMD/PADM treatment may promote periodontal regeneration in gingival recession defects.

CLINICAL RELEVANCE

The present results suggest that the combination of EMD and PADM in conjunction with CAF may represent a promising approach for treating single Miller class II gingival recessions.

Common target genes of palatal and gingival fibroblasts for EMD: the microarray approach

BACKGROUND AND OBJECTIVE

Connective tissue grafts are frequently applied, together with Emdogain(®) , for root coverage. However, it is unknown whether fibroblasts from the gingiva and from the palate respond similarly to Emdogain. The aim of this study was therefore to evaluate the effect of Emdogain(®) on fibroblasts from palatal and gingival connective tissue using a genome-wide microarray approach.

MATERIAL AND METHODS

Human palatal and gingival fibroblasts were exposed to Emdogain(®) and RNA was subjected to microarray analysis followed by gene ontology screening with Database for Annotation, Visualization and Integrated Discovery functional annotation clustering, Kyoto Encyclopedia of Genes and Genomes pathway analysis and the Search Tool for the Retrieval of Interacting Genes/Proteins functional protein association network. Microarray results were confirmed by quantitative RT-PCR analysis.

RESULTS

The transcription levels of 106 genes were up-/down-regulated by at least five-fold in both gingival and palatal fibroblasts upon exposure to Emdogain(®) . Gene ontology screening assigned the respective genes into 118 biological processes, six cellular components, eight molecular functions and five pathways. Among the striking patterns observed were the changing expression of ligands targeting the transforming growth factor-beta and gp130 receptor family as well as the transition of mesenchymal epithelial cells. Moreover, Emdogain(®) caused changes in expression of receptors for chemokines, lipids and hormones, and for transcription factors such as SMAD3, peroxisome proliferator-activated receptor gamma and those of the ETS family.

CONCLUSION

The present data suggest that Emdogain(®) causes substantial alterations in gene expression, with similar patterns observed in palatal and gingival fibroblasts.

Effect of pulverized natural bone mineral on regeneration of three-wall intrabony defects. A preclinical study

AIMS

The objective of this study is to evaluate the effects of a paste-like bone substitute material with easy handling properties and improved mechanical stability on periodontal regeneration of intrabony defects in dogs.

MATERIALS AND METHODS

Mandibular and maxillary first and third premolars were extracted, and three-wall intrabony defects were created on second and fourth premolars. After a healing period of 3 months, acute type defects were filled with a paste-like formulation of deproteinized bovine bone mineral (DBBM) (particle size, 0.125-0.25 mm) in a collagenous carrier matrix (T1), pulverized DBBM (particle size, 0.125-0.25 mm) without the carrier (T2), or Bio-Oss® granules (particle size, 0.25-1.00 mm) as control (C). All defects were covered with a Bio-Gide® membrane. The dogs were sacrificed after 12 weeks, and the specimens were analyzed histologically and histometrically.

RESULTS

Postoperative healing of all defects was uneventful, and no histological signs of inflammation were observed in the augmented and gingival regions. New cementum, new periodontal ligament, and new bone were observed in all three groups. The mean vertical bone gain was 3.26 mm (T1), 3.60 mm (T2), and 3.81 mm (C). That of new cementum was 2.25 mm (T1), 3.88 mm (T2), and 3.53 mm (C). The differences did not reach statistical significance. The DBBM particles were both incorporated in new bone and embedded in immature bone marrow.

CONCLUSIONS

The results of this preclinical study showed that the 0.125-0.25-mm DBBM particles in a powder or paste formulation resulted in periodontal regeneration comparable to the commercially available DBBM. Osteoconductivity, in particular, was not affected by DBBM size or paste formulation.

CLINICAL RELEVANCE

The improved handling properties of the paste-like bone substitute consisting of small DBBM particles embedded in a collagen-based carrier hold promise for clinical applications.