Milk beverage base with lactose removed with ultrafiltration: Effect of fat and protein concentration on sensory and physical properties

Our objectives were to determine the effect of fat (skim to whole milk) and protein (3.4%-10.5%) concentration on the sensory and physical properties of milk beverage base that had lactose and other low molecular components removed by ultrafiltration (UF). In experiment 1, a matrix of 16 treatments was produced to achieve 4 levels of lactose removal (0%, 30%, 70%, and 97%) at each of 4 fat levels (skim, 1%, 2%, and whole milk). In experiment 2, a matrix of 12 treatments was produced to achieve 4 levels of lactose removal (0%, 30%, 70%, and 97%) at each of 3 protein concentrations (3.4%, 6.5%, and 10.5% protein). Physical and sensory properties of these products were determined. Removal of >95% of milk lactose by UF required a diafiltration volume of approximately 3 times the milk volume. Lactose and low molecular weight solute removal increased whiteness across the range from skim to whole milk while decreasing viscosity and making milk flavor blander. In addition, lactose (and other low molecular weight solute) removal by UF decreased titratable acidity by more than 50% and increased milk pH at 20°C to >7.0. Future work on milk and milk-based beverages with lactose removed by UF needs to focus on interaction of the remaining milk solids with added flavorings, changing casein to whey protein ratio before removal of lactose by UF, and the effect of lactose and low molecular weight solute removal on heat stability, particularly for neutral-pH, shelf-stable milk-based beverages.

Calcium dynamics and associated temporal patterns of milk constituents in early-lactation multiparous Holsteins

At the onset of lactation, calcium (Ca) homeostasis is challenged. For the transitioning dairy cow, inadequate responses to this challenge may result in subclinical hypocalcemia at some point in the postpartum period. It has been proposed that dynamics of blood Ca and the timing of subclinical hypocalcemia allow cows to be classified into 4 Ca dynamic groups by assessing serum total Ca concentrations (tCa) at 1 and 4 days in milk (DIM). These differing dynamics are associated with different risks of adverse health events and suboptimal production. Our prospective cohort study aimed to characterize the temporal patterns of milk constituents in cows with differing Ca dynamics to investigate the potential of Fourier-transform infrared spectroscopic (FTIR) analysis of milk as a diagnostic tool for identifying cows with unfavorable Ca dynamics. We sampled the blood of 343 multiparous Holsteins on a single dairy in Cayuga County, New York, at 1 and 4 DIM and classified these cows into Ca dynamic groups using threshold concentrations of tCa (1 DIM: tCa <1.98 mmol/L; 4 DIM: tCa <2.22 mmol/L) derived from receiver operating characteristic curve analysis based on epidemiologically relevant health and production outcomes. We also collected proportional milk samples from each of these cows from 3 to 10 DIM for FTIR analysis of milk constituents. Through this analysis we estimated the milk constituent levels of anhydrous lactose (g/100 g of milk and g/milking), true protein (g/100 g of milk and g/milking), fat (g/100 g of milk and g/milking), milk urea nitrogen (mg/100 g of milk), fatty acid (FA) groups including de novo, mixed origin, and preformed FA measured in grams/100 g of milk, by relative percentage, and grams/milking, as well as energy-related metabolites including ketone bodies and milk-predicted blood nonesterified FA. Individual milk constituents were compared among groups at each time point and over the entire sample period using linear regression models. Overall, we found differences among the constituent profiles of Ca dynamic groups at approximately every time point and over the entire sample period. The 2 at-risk groups of cows did not differ from each other at more than one time point for any constituent, however prominent differences existed between the milk of normocalcemic cows and the milk of the other Ca dynamic groups with respect to FA. Over the entire sample period, lactose and protein yield (g/milking) were lower in the milk of at-risk cows than in the milk of the other Ca dynamic groups. In addition, milk yield per milking followed patterns consistent with previous Ca dynamic group research. Though our use of a single farm does limit the general applicability of these findings, our conclusions provide evidence that FTIR may be a useful method for discriminating between cows with different Ca dynamics at time points that may be relevant in the optimization of management or development of clinical intervention strategies.

Effect of replacing a portion of inorganic chloride trace minerals with trace mineral amino acid complexes

The objective was to determine whether replacing a portion of inorganic chloride trace minerals and cobalt carbonate in the diet with AA complexes of trace minerals and cobalt glucoheptonate will improve lactating cow performance, feed efficiency, and calf performance. In a clinical trial, 69 Holstein cows entering second lactation and greater were randomly assigned to 1 of 2 treatments, with the total dietary trace mineral concentration the same between treatments, starting 1 wk after dry off (50 to 57 d before expected parturition) until 154 d in milk (DIM): (1) an inorganic chloride trace mineral (ITM) blend consisting of Zn (75 mg/kg), Mn (65 mg/kg), and Cu (10 mg/kg) as hydroxychlorides and Co (1 mg/kg) as carbonate (n = 37) or (2) partial replacement of ITM with AA complexes of Zn (40 mg/kg), Mn (20 mg/kg), and Cu (3.5 mg/kg) and Co glucoheptonate (1 mg/kg; AATM; Availa-Dairy, Zinpro Corp.; n = 32). Dry matter intake (DMI) was recorded daily from enrollment through wk 8, and milk yields were recorded daily from calving through wk 22. Milk composition and body weights (BW) were collected weekly. Serum samples were analyzed for albumin (Alb), cholesterol (Chol), total bilirubin (Bili), aspartate aminotransferase (AST), haptoglobin, β-hydroxybutyrate (BHB), and Ca. A liver health index (LHI) was calculated based on Bili, Chol, and Alb concentrations. A liver functionality index (LFI) was calculated to standardize changes in Alb, Chol, and Bili from 4 to 29 DIM. Greater LHI and LFI indicate better health status. Colostrum was analyzed for IgG and Brix, and calf serum was analyzed for IgG. Calf growth was monitored through 9 wk of age (AATM: n = 12, ITM: n = 10). Data were analyzed using SAS software with mixed effects models and repeated-measures analysis, when applicable. Survival analysis for pregnancy by 154 DIM was analyzed by Cox proportional and Kaplan-Meier hazards models. Disorder incidence was tested with Fisher's exact test. Prepartum DMI as a percent of BW was lower in cows fed AATM and not significant postpartum. Cows fed AATM produced more milk from wk 1 to 8 and from wk 1 to 22. Energy-corrected milk yield and colostrum measures did not significantly differ between treatments. A treatment by time interaction was seen for AST and BHB; cows fed AATM tended to have lower AST concentrations at 28 DIM and lower concentrations in BHB through 29 DIM, though not statistically significant. Cows fed AATM had greater LHI at 4 DIM. Haptoglobin, Ca, LFI, hazard of pregnancy, risk to first service, survival curves, or services per pregnancy did not significantly differ. Calf serum IgG and birth weight did not significantly differ between treatments. Calves from dams fed AATM had greater average daily gain than calves from dams fed ITM. Overall, cows fed AATM during the dry period and early lactation had improved postpartum performance and potential health improvements.

Patterns of Fourier-transform infrared estimated milk constituents in early lactation Holstein cows on a single New York State dairy

Cows undergo immense physiological stress to produce milk during early lactation. Monitoring early lactation milk through Fourier-transform infrared (FTIR) spectroscopy might offer an understanding of which cows transition successfully. Daily patterns of milk constituents in early lactation have yet to be reported continuously, and the study objective was to initially describe these patterns for cows of varying parity groups from 3 through 10 d postpartum, piloted on a single dairy. We enrolled 1,024 Holstein cows from a commercial dairy farm in Cayuga County, New York, in an observational study, with a total of 306 parity 1 cows, 274 parity 2 cows, and 444 parity ≥3 cows. Cows were sampled once daily, Monday through Friday, via proportional milk samplers, and milk was stored at 4°C until analysis using FTIR. Estimated constituents included anhydrous lactose, true protein, and fat (g/100 g of milk); relative % (rel%) of total fatty acids (FA) and concentration (g/100 g of milk) of de novo, mixed, and preformed FA; individual fatty acids C16:0, C18:0, and C18:1 cis-9 (g/100 g of milk); milk urea nitrogen (MUN; mg/100 g of milk); and milk acetone (mACE), milk β-hydroxybutyrate (mBHB), and milk-predicted blood nonesterified fatty acids (mpbNEFA) (all expressed in mmol/L). Differences between parity groups were assessed using repeated-measures ANOVA. Milk yield per milking differed over time between 3 and 10 DIM and averaged 8.7, 13.3, and 13.3 kg for parity 1, 2, and ≥3 cows, respectively. Parity differences were found for % anhydrous lactose, % fat, and preformed FA (g/100 g of milk). Parity differed across DIM for % true protein, de novo FA (rel% and g/100 g of milk), mixed FA (rel% and g/100 g of milk), preformed FA rel%, C16:0, C18:0, C18:1 cis-9, MUN, mACE, mBHB, and mpbNEFA. Parity 1 cows had less true protein and greater fat percentages than parity 2 and ≥3 cows (% true protein: 3.52, 3.76, 3.81; % fat: 5.55, 4.69, 4.95, for parity 1, 2, ≥3, respectively). De novo and mixed FA rel% were reduced and preformed FA rel% were increased in primiparous compared with parity 2 and ≥3 cows. The increase in preformed FA rel% in primiparous cows agreed with milk markers of energy deficit, such that mpbNEFA, mBHB, and mACE were greatest in parity 1 cows followed by parity ≥3 cows, with parity 2 cows having the lowest concentrations. When measuring milk constituents with FTIR, these results suggest it is critical to account for parity for the majority of estimated milk constituents. We acknowledge the limitation that this study was conducted on a single farm; however, if FTIR technology is to be used as a method of identifying cows maladapted to lactation, understanding variations in early lactation milk constituents is a crucial first step in the practical adoption of this technology.

Effects of micellar casein concentrate purity and milk fat on sulfur/eggy flavor in ultrapasteurized milk-based beverages

Our objectives were to determine the level of milk-derived whey protein (MDWP) removal necessary to achieve no detectable sulfur/eggy flavor in ultrapasteurized fat-free micellar casein concentrate (MCC) beverages (6.5% protein) and in the same beverages containing 1 and 2% milk fat. Micellar casein concentrate with 95% MDWP removal was produced from skim milk (50°C) with a 3×, 3-stage ceramic microfiltration (MF) process using 0.1-µm pore size graded permeability membranes (n = 3). In experiment 1, MCC-based beverages at about 6.5% (wt/wt) true protein were formulated at a fat content of 0.15% fat (wt/wt) at 4 different levels of MDWP removal percentages (95.2%, 91.0%, 83.2%, and 69.3%). In experiment 2, a similar series of beverages at 3 MDWP removal percentages (95.2%, 83.2%, and 69.3%) with 0.1, 1, and 2% fat content were produced. The purity (or completeness of removal of whey protein by MF) of MCC was determined by the Kjeldahl method and sodium dodecyl sulfate (SDS)-PAGE. Sensory properties of beverages were documented by descriptive sensory analysis, and volatile sulfur compounds were evaluated using solid-phase microextraction followed by gas chromatography-triple quadrupole mass spectrometry. The purity of MCC measured by the Kjeldahl method (casein as a percentage of true protein) was higher after thermal treatment than before, whereas MCC purity evaluated by SDS-PAGE was unchanged by heat treatment. The purity of MCC had an effect on the flavor profile of thermally processed beverages at 6.5% protein made with fresh liquid MCC. No sulfur/eggy flavor was detected in MCC beverages when 95% of the MDWP was removed (MCC purity about 93 to 94%) from skim milk by microfiltration at 0.1, 1, and 2% fat. As the fat content of 6.5% protein beverages produced with MCC increased, sulfur/eggy flavor intensity and hydrogen sulfide concentration decreased. However, the effect of increasing milk fat on reducing sulfur/eggy flavor in MCC-based beverages at 6.5% protein was less than that of increasing MDWP removal from MCC. Sulfur off-flavors in neutral-pH dairy protein beverages can be mitigated by use of high-purity MCC or by incorporation of fat in the beverage, or both.

Children's perceptions of fluid milk with varying levels of milkfat

Schools participating in federal meal programs are limited to serving skim or low-fat (≤1%) flavored and unflavored milk. Few studies have directly addressed child perceptions and preferences for milk containing different amounts of milkfat. The objective of this study was to determine whether children can differentiate between flavored and unflavored fluid milk containing varying levels of milkfat and whether preferences for certain levels of milkfat exist. Flavored and unflavored milks containing 4 different percentages of milkfat (≤0.5, 1, 2, and 3.25%) were high-temperature, short-time processed, filled into half-gallon light-shielded milk jugs, and stored at 4°C in the dark. Milks were evaluated by children (ages 8-13 yr) following 7 d at 4°C. Acceptance testing and tetrad difference testing were conducted on flavored and unflavored milks with and without visual cues to determine if differences were driven by visual or flavor or mouthfeel cues. Child acceptance testing (n = 138 unflavored; n = 123 flavored) was conducted to evaluate liking and perception of selected attributes. Tetrad testing (n = 127 unflavored; n = 129 flavored) was conducted to determine if children could differentiate between different fat levels even in the absence of a difference in acceptance. The experiment was replicated twice. When visual cues were present, children had higher overall liking for 1% and 2% milks than skim for unflavored milk and higher liking for chocolate milks containing at least 1% milk fat than for skim. Differences in liking were driven by appearance, viscosity, and flavor. In the absence of visual cues, no differences were observed in liking or flavor or mouthfeel attributes for unflavored milk but higher liking for at least 1% milk fat in chocolate milk compared with skim was consistent with the presence of visual cues. From tetrad testing, children could visually tell a difference between all unflavored pairs except 2% versus whole milk and could not detect consistent differences between milkfat pairs in the absence of visual cues. For chocolate milk, children could tell a difference between all milk fat pairs with visual cues and could tell a difference between skim versus 2% and skim versus whole milk without visual cues. These results demonstrate that in the absence of package-related flavors, school-age children like unflavored skim milk as well as milk with higher fat content in the absence of visual cues. In contrast, appearance as well as flavor and mouthfeel attributes play a role in children's liking as well as their ability to discriminate between chocolate milks containing different amounts of fat, with chocolate milk containing at least 1% fat preferred. The sensory quality of school lunch milk is vital to child preference, and processing efforts are needed to maximize school milk sensory quality.

Performance evaluation of an enzymatic spectrophotometric method for milk urea nitrogen

Our objective was to determine the within and between laboratory performance of an enzymatic spectrophotometric method for milk urea nitrogen (MUN) determination. This method first uses urease to hydrolyze urea into ammonia and carbon dioxide. Next, ammonia (as ammonium ions) reacts with 2-oxoglutarate, in the presence of reduced nicotinamide-adenine dinucleotide phosphate (NADPH) and the enzyme glutamate dehydrogenase (GlDH), to form l-glutamic acid, water, and NADP⁺. The change in light absorption at 340 nm due to the conversion of NADPH to NADP+ is stoichiometrically a function of the MUN content of a milk sample. The relative within (RSD_r) and between (RSD_R) laboratory method performance values for the MUN enzymatic spectrophotometric method were 0.57% and 0.85%, respectively, when testing individual farm milks. The spectrophotometric MUN method demonstrated better within and between laboratory performance than the International Dairy Federation differential pH MUN method with a much lower RSD_r (0.57 vs. 1.40%) and RSD_R (0.85 vs. 4.64%). The spectrophotometric MUN method also had similar method performance statistics as other AOAC International official validated chemical methods for primary milk component determinations, with the average of all RSD_r and RSD_R values being <1%. An official collaborative study of the enzymatic spectrophotometric MUN method is needed to achieve International Dairy Federation, AOAC International, and International Organization for Standardization official method status.

Ready-to-drink protein beverages: Effects of milk protein concentration and type on flavor

This study evaluated the role of protein concentration and milk protein ingredient [serum protein isolate (SPI), micellar casein concentrate (MCC), or milk protein concentrate (MPC)] on sensory properties of vanilla ready-to-drink (RTD) protein beverages. The RTD beverages were manufactured from 5 different liquid milk protein blends: 100% MCC, 100% MPC, 18:82 SPI:MCC, 50:50 SPI:MCC, and 50:50 SPI:MPC, at 2 different protein concentrations: 6.3% and 10.5% (wt/wt) protein (15 or 25 g of protein per 237 mL) with 0.5% (wt/wt) fat and 0.7% (wt/wt) lactose. Dipotassium phosphate, carrageenan, cellulose gum, sucralose, and vanilla flavor were included. Blended beverages were preheated to 60°C, homogenized (20.7 MPa), and cooled to 8°C. The beverages were then preheated to 90°C and ultrapasteurized (141°C, 3 s) by direct steam injection followed by vacuum cooling to 86°C and homogenized again (17.2 MPa first stage, 3.5 MPa second stage). Beverages were cooled to 8°C, filled into sanitized bottles, and stored at 4°C. Initial testing of RTD beverages included proximate analyses and aerobic plate count and coliform count. Volatile sulfur compounds and sensory properties were evaluated through 8-wk storage at 4°C. Astringency and sensory viscosity were higher and vanillin flavor was lower in beverages containing 10.5% protein compared with 6.3% protein, and sulfur/eggy flavor, astringency, and viscosity were higher, and sweet aromatic/vanillin flavor was lower in beverages with higher serum protein as a percentage of true protein within each protein content. Volatile compound analysis of headspace vanillin and sulfur compounds was consistent with sensory results: beverages with 50% serum protein as a percentage of true protein and 10.5% protein had the highest concentrations of sulfur volatiles and lower vanillin compared with other beverages. Sulfur volatiles and vanillin, as well as sulfur/eggy and sweet aromatic/vanillin flavors, decreased in all beverages with storage time. These results will enable manufacturers to select or optimize protein blends to better formulate RTD beverages to provide consumers with a protein beverage with high protein content and desired flavor and functional properties.

The relationship of excessive energy deficit with milk somatic cell score and clinical mastitis

Periparturient cows go through a period of immune suppression often marked by immune cell dysfunction. Further exacerbation of this dysfunction through early-lactation excessive energy deficit (EED) has been associated with increased susceptibility to infectious conditions such as mastitis. Our objective was to explore the association of milk somatic cell score (SCS) and clinical mastitis (CM) diagnosis in cows identified with EED, diagnosed using each of the following: blood and milk β-hydroxybutyrate (BHB), milk predicted blood nonesterified fatty acid (mpbNEFA) concentrations, or milk de novo fatty acid (FA) relative percentages (rel %). We analyzed data collected from 396 multiparous Holstein cows from 2 New York farms in a prospective cohort study. Coccygeal vessel blood samples and composite milk samples were collected twice weekly from 3 to 18 days in milk (DIM) for a total of 4 time points per cow (T1, T2, T3, T4). Blood was analyzed using a hand-held meter, and milk was analyzed using Fourier-transform mid-infrared spectrometry for milk BHB and mpbNEFA concentrations, milk de novo FA rel %, and somatic cell count. Excessive energy deficit was diagnosed as blood BHB ≥ 1.2 mmol/L, milk BHB ≥ 0.14 mmol/L, mpbNEFA ≥ 0.55 mmol/L, or de novo FA ≤ 22.7 rel %, depending on the model. Clinical mastitis cultures were collected from 4 to 60 DIM by on-farm personnel. Incidence of hyperketonemia as determined by blood BHB was 13.4%, and incidence of CM was 23.9%. Separate repeated-measures ANOVA models were developed for each EED diagnostic analyte for parity groups 2, 3, and ≥4 to assess differences in SCS; t-test analyses were similarly used to assess the association of each diagnostic analyte with CM at each time point. For all diagnostic analytes, apart from milk BHB, cows diagnosed with EED tended to have lower SCS than their non-EED counterparts. This was especially apparent at T1 for all parity groups, and at T2, T3, and T4 for blood BHB and mpbNEFA. For EED diagnosis via mpbNEFA, mean SCS were lower in parity ≥4, with a difference in mean SCS between EED and non-EED animals of 0.7 SCS units, equating to a somatic cell count in EED animals approaching half that of non-EED (EED = 67,000 cells/mL, non-EED = 107,000 cell/mL). No important relationships were observed between CM diagnosis and blood BHB, milk BHB, or mpbNEFA. For de novo FA rel %, reductions in this analyte were noted before CM diagnosis at all time points. Although the relationship between EED and CM is still unclear, our findings suggest that cows in EED, diagnosed using blood BHB or mpbNEFA during the first 18 DIM, have a tendency toward lower SCS compared with their non-EED counterparts.

Effect of hyperketonemia on the diurnal patterns of energy-related blood metabolites in early-lactation dairy cows

Most dairy cows experience a period of energy deficit in early lactation, resulting in increased plasma concentrations of nonesterified fatty acids (NEFA) and β-hydroxybutyrate (BHB). Our objectives were to determine (1) the diurnal variation in plasma BHB and NEFA, (2) the correlation between plasma NEFA and BHB when accounting for diurnal changes, and (3) the effect of hyperketonemia (HYK) on the diurnal pattern of blood metabolites. Jugular catheters were placed in 28 multiparous Holstein cows between 3 and 9 days in milk, and blood samples were collected every 2 h for 96 h. Cows were retrospectively classified as HYK positive (HYK; n = 13) if they had plasma BHB concentrations ≥1.2 mmol/L for ≥3 study days, or HYK negative (non-HYK; n = 15) if they had plasma BHB concentrations ≥1.2 mmol/L for ≤2 study days. Generalized linear mixed models were used to analyze concentrations of analytes over time and differences in metabolites between HYK groups. The correlation between total plasma NEFA and BHB was analyzed by calculating the area under the curve for plasma NEFA and BHB for all cows. Plasma NEFA reached a peak approximately 2 h before morning feed delivery, falling to a nadir in the late evening. Plasma BHB was at a nadir at the time of morning feed delivery, peaking 4 h later. We observed a strong positive correlation between daily plasma NEFA and BHB. Additionally, HYK cows had greater concentrations of plasma NEFA and BHB than non-HYK cows. The HYK cows also experienced a greater magnitude of change in BHB throughout the day than the non-HYK cows. Our results suggest that the time relative to feeding should be considered when analyzing plasma metabolites, as classification of energy status may change throughout a day.

Association of mid-infrared-predicted milk and blood constituents with early-lactation disease, removal, and production outcomes in Holstein cows

Partial least squares regression estimates of milk and blood constituents using Fourier-transform mid-infrared (FTIR) analysis have shown promise as a tool for monitoring early-lactation excessive energy deficit in dairy herds. Our objective was to analyze milk via FTIR to determine the association of early-lactation predicted milk β-hydroxybutyrate (BHB) concentrations, predicted blood nonesterified fatty acid (NEFA) concentrations, and predicted milk de novo fatty acid (FA) percentages relative to total FA concentrations, with the risk of disease or removal in early lactation (hyperketonemia, displaced abomasum, metritis, culling, or death) and average daily milk yield during the first 15 wk of lactation. We enrolled 517 multiparous Holstein cows from 2 dairy farms in New York. Composite milk samples were collected twice weekly from 3 to 18 DIM for a total of 4 timepoints (T1, T2, T3, T4) and analyzed using FTIR spectrometry for milk BHB and FA composition and predicted blood NEFA. Blood samples were collected for hyperketonemia determination (BHB ≥ 1.2 mmol/L) using a handheld meter, and farm-diagnosed occurrence of disease or removal during the first 30 DIM and average daily milk yield during the first 15 wk of lactation were collected from herd management software. The incidence of disease or removal between 3 and 18 DIM was 20.2%. Explanatory models for disease or removal were developed for each predicted constituent of interest at each timepoint using fixed-effect multivariable Poisson regression. Repeated measures ANOVA models were developed for each predicted constituent to assess differences in average daily milk yield. For all timepoints, increased risk of disease or removal was associated with higher predicted milk BHB [relative risk (RR)_T1 = 2.0; RR_T2 = 3.4; RR_T3 = 5.2; RR_T4 = 9.1], higher predicted blood NEFA (RR_T1 = 2.7; RR_T2 = 2.5; RR_T3 = 3.8; RR_T4 = 10.0), and lower predicted milk de novo FA relative percentages (RR_T1 = 2.9; RR_T2 = 3.3; RR_T3 = 5.8; RR_T4 = 7.2). Average daily milk yield was increased for cows above the cut point for predicted milk BHB (2.1 kg/d) and predicted blood NEFA (3.5 kg/d) and below the cut point for de novo FA relative percentages (2.3 kg/d). Our results suggest that FTIR-predicted milk BHB, blood NEFA, and milk de novo FA relative percentages are promising indicators of subsequent disease or removal in early lactation; their positive relationship with milk yield warrants further exploration.

Effects of feeding synthetic zeolite A during the prepartum period on serum mineral concentration, oxidant status, and performance of multiparous Holstein cows

The objective of this study was to determine the effects of feeding synthetic zeolite A for 3 wk before expected calving on peripartal serum mineral concentrations, hypocalcemia, oxidant status, and performance. Holstein cows (n = 55) entering their second or greater lactations were assigned randomly to 1 of 2 dietary treatments starting 21 d before expected calving: control (CON: 40% corn silage, 33% wheat straw, and 27% concentrate; n = 29) or experimental [EXP: CON plus zeolite A (X-Zelit, Protekta Inc., Lucknow, ON, Canada/Vilofoss, Graasten, Denmark; n = 26) at an inclusion rate of 3.3% of dry matter, targeting 500 g/d as-fed]. Cows were fed the same postpartum diet and housed in individual tiestalls through 28 d in milk. Cows fed EXP had higher serum Ca concentrations as parturition approached and during the immediate postpartum period. Serum P concentrations were lower for the EXP-fed cows during the prepartum period and the first 2 d of lactation, whereas serum Mg concentrations were lower than those of the CON-fed cows only during the immediate periparturient period. Cows fed EXP had decreased prevalence of subclinical hypocalcemia (SCH) from d -1 through 3 relative to day of parturition, with the largest difference occurring within the first day postpartum. Prepartum dry matter intake tended to be decreased and rumination was decreased in cows fed EXP; however; postpartum dry matter intake, rumination, milk yield, milk component yield, and colostrum measurements did not differ between treatments. Cows fed EXP tended to have increased hazard of pregnancy by 150 d in milk when controlling for parity compared with CON-fed cows; potential reproductive benefits merit further study. This study demonstrated that zeolite A supplementation during the prepartum period results in markedly improved serum Ca concentrations around parturition and similar postpartum performance compared with controls and is effective at decreasing hypocalcemia in multiparous Holstein cows.

Does vitamin fortification affect light oxidation in fluid skim milk?

Off-flavors in milk related to light oxidation form due to photoxidation of native riboflavin and tetrapyrroles, resulting in an array of lipid oxidation compounds. Recent work has established that fortification with water-dispersible vitamin A can result in off-flavors in fluid skim milk caused by vitamin A degradation products in the vitamin premix. The objective of this study was to determine the role of vitamin fortification on light oxidation of high temperature, short time pasteurized fluid skim milk. First, the aroma profiles and aroma-active volatile compounds in light-exposed vitamin premixes were determined by exposing the premixes to fluorescent (FL) or light-emitting diode (LED) light at 2,000 lx at 4°C for 0, 2, 4, 8, or 24 h. A trained panel (n = 6) documented aroma profiles of each vitamin premix at each time point. Headspace solid-phase microextraction followed by gas chromatography-olfactometry and gas chromatography-mass spectrometry (GC-MS) were performed to characterize aroma-active compounds in light-exposed vitamin premixes. In the second experiment, commercial vitamin premixes (vitamin A and vitamin D in oil and water matrices) were used to fortify skim milk (vitamin A: 3,000 IU/946 mL; vitamin D: 600 IU/946 mL). Skim milk was pasteurized, homogenized, and packaged in 946-mL high-density polyethylene jugs. Milks were exposed to FL or LED light at 2,000 lx at 4°C for 4, 12, 24, or 48 h. Controls with and without vitamins and light shielding were included. Riboflavin and vitamin A and D degradation were quantified via ultra-high-performance liquid chromatography. A trained panel (n = 8) documented sensory profiles of milks at each time point. Lipid oxidation volatile compounds were quantified via solid-phase microextraction with GC-MS. Vitamin degradation volatile compounds were quantified via solvent-assisted sorptive stir bar extraction with GC-MS. Riboflavin, vitamin A, and vitamin D degradation were consistent with that reported in previous studies. We found no effect of vitamin fortification on development of typical light oxidation-related off-flavors (cardboard and mushroom) or lipid oxidation-related volatiles (hexanal and heptanal). A perfumey/floral flavor was documented in the oil-based vitamin A-fortified milk, suggesting that light exposure affected the off-flavors contributed by water- versus oil-based vitamin fortification. These results show no evidence that vitamin fortification at current levels provides any protection against light oxidation-related off-flavors in fluid milk.

Flavor and flavor chemistry differences among milks processed by high-temperature, short-time pasteurization or ultra-pasteurization

Typical high-temperature, short-time (HTST) pasteurization encompasses a lower heat treatment and shorter refrigerated shelf life compared with ultra-pasteurization (UP) achieved by direct steam injection (DSI-UP) or indirect heat (IND-UP). A greater understanding of the effect of different heat treatments on flavor and flavor chemistry of milk is required to characterize, understand, and identify the sources of flavors. The objective of this study was to determine the differences in the flavor and volatile compound profiles of milk subjected to HTST, DSI-UP, or IND-UP using sensory and instrumental techniques. Raw skim and raw standardized 2% fat milks (50 L each) were processed in triplicate and pasteurized at 78°C for 15 s (HTST) or 140°C for 2.3 s by DSI-UP or IND-UP. Milks were cooled and stored at 4°C, then analyzed at d 0, 3, 7, and 14. Sensory attributes were determined using a trained panel, and aroma active compounds were evaluated by solid-phase micro-extraction or stir bar sorptive extraction followed by gas chromatography-mass spectrometry, gas chromatography-olfactometry, and gas chromatography-triple quad mass spectrometry. The UP milks had distinct cooked and sulfur flavors compared with HTST milks. The HTST milks had less diversity in aroma active compounds compared with UP milks. Flavor intensity of all milks decreased by d 14 of storage. Aroma active compound profiles were affected by heat treatment and storage time in both skim and 2% milk. High-impact aroma active compounds were hydrogen sulfide, dimethyl trisulfide, and methional in DSI-UP and 2 and 3-methylbutanal, furfural, 2-heptanone, 2-acetyl-1-pyrroline, 2-aminoacetophenone, benzaldehyde, and dimethyl sulfide in IND-UP. These results provide a foundation knowledge of the effect of heat treatments on flavor development and differences in sensory quality of UP milks.

The effect of vitamin concentrates on the flavor of pasteurized fluid milk

Fluid milk consumption in the United States continues to decline. As a result, the level of dietary vitamin D provided by fluid milk in the United States diet has also declined. Undesirable flavor(s)/off flavor(s) in fluid milk can negatively affect milk consumption and consumer product acceptability. The objectives of this study were to identify aroma-active compounds in vitamin concentrates used to fortify fluid milk, and to determine the influence of vitamin A and D fortification on the flavor of milk. The aroma profiles of 14 commercial vitamin concentrates (vitamins A and D), in both oil-soluble and water-dispersible forms, were evaluated by sensory and instrumental volatile compound analyses. Orthonasal thresholds were determined for 8 key aroma-active compounds in skim and whole milk. Six representative vitamin concentrates were selected to fortify skim and 2% fat pasteurized milks (vitamin A at 1,500-3,000 IU/qt, vitamin D at 200-1,200 IU/qt, vitamin A and D at 1,000/200-6,000/1,200 IU/qt). Pasteurized milks were evaluated by sensory and instrumental volatile compound analyses and by consumers. Fat content, vitamin content, and fat globule particle size were also determined. The entire experiment was done in duplicate. Water-dispersible vitamin concentrates had overall higher aroma intensities and more detected aroma-active compounds than oil-soluble vitamin concentrates. Trained panelists and consumers were able to detect flavor differences between skim milks fortified with water-dispersible vitamin A or vitamin A and D, and unfortified skim milks. Consumers were unable to detect flavor differences in oil-soluble fortified milks, but trained panelists documented a faint carrot flavor in oil-soluble fortified skim milks at higher vitamin A concentrations (3,000-6,000 IU). No differences were detected in skim milks fortified with vitamin D, and no differences were detected in any 2% milk. These results demonstrate that vitamin concentrates may contribute to off flavor(s) in fluid milk, especially in skim milk fortified with water-dispersible vitamin concentrates.

Management practices, physically effective fiber, and ether extract are related to bulk tank milk de novo fatty acid concentration on Holstein dairy farms

The objective of this study was to evaluate the relationship of management practices and dietary factors with de novo fatty acid concentration in bulk tank milk from commercial dairy farms milking Holstein cows. Farms were selected based on de novo fatty acid concentration during the 6 mo before the farm visit and were categorized as high de novo (HDN; 24.61 ± 0.75 g/100 g of fatty acids, mean ± standard deviation; n = 19) or low de novo (LDN; 23.10 ± 0.88 g/100 g of fatty acids; n = 20). Farms were visited once in February, March, or April 2015 and evaluated based on management and facility design known to affect cow behavior, physical and chemical characteristics of the diet, and ration formulation and forage analyses obtained from the farm's nutritionist. We observed no differences between HDN and LDN farms in farm size, time away from the pen for milking, days in milk, or body condition score. We detected no differences between HDN and LDN farms in milk fat or true protein yield; however, milk fat and protein content and de novo fatty acid yield per day were higher for HDN farms, as was gross income per unit of milk sold. High de novo farms tended to be more likely to deliver fresh feed twice versus once per day, have a freestall stocking density ≤110%, and provide ≥46 cm of feed bunk space per cow. We observed no detectable differences in forage quality or ration dry matter, crude protein, or starch content. However, ether extract was lower and physically effective neutral detergent fiber was higher for HDN farms. Feeding management, stocking density, dietary ether extract content, and the physical characteristics of the diet are related to de novo fatty acid, fat, and protein concentration in bulk tank milk from high-producing Holstein dairy farms.

Comparison of functional properties of 34% and 80% whey protein and milk serum protein concentrates

This study compared the functional properties of serum protein concentrate (SPC) with whey protein concentrate (WPC) made from the same milk and with commercial WPC. The experimental SPC and WPC were produced at 34% or 80% protein from the same lot of milk. Protein contents of WPC and SPC were comparable; however, fat content was much lower in SPC compared with WPC and commercial WPC. The effect of drying methods (freeze vs. spray drying) was studied for 34% WPC and SPC. Few differences due to drying method were found in turbidity and gelation; however, drying method made a large difference in foam formation for WPC but not SPC. Between pH 3 and 7, SPC was found to have lower turbidity than WPC; however, protein solubility was similar between SPC and WPC. Foaming and gelation properties of SPC were better than those of WPC. Differences in functional properties may be explained by differences in composition and extent of denaturation or aggregation.

Survey of the fatty acid composition of retail milk in the United States including regional and seasonal variations

Consumers are increasingly aware that food components have the potential to influence human health maintenance and disease prevention, and dietary fatty acids (FA) have been of special interest. It has been 25 years since the last survey of US milk FA composition, and during this interval substantial changes in dairy rations have occurred, including increased use of total mixed rations and byproduct feeds as well as the routine use of lipid and FA supplements. Furthermore, analytical procedures have improved allowing greater detail in the routine analysis of FA, especially trans FA. Our objective was to survey US milk fat and determine its FA composition. We obtained samples of fluid milk from 56 milk processing plants across the US every 3 mo for one year to capture seasonal and geographical variations. Processing plants were selected based on the criteria that they represented 50% or more of the fluid milk produced in that area. An overall summary of the milk fat analysis indicated that saturated fatty acids comprised 63.7% of total milk FA with palmitic and stearic acids representing the majority (44.1 and 18.3% of total saturated fatty acids, respectively). Unsaturated fatty acids were 33.2% of total milk FA with oleic acid predominating (71.0% of total unsaturated fatty acids). These values are comparable to those of the previous survey in 1984, considering differences in analytical techniques. Trans FA represented 3.2% of total FA, with vaccenic acid being the major trans isomer (46.5% of total trans FA). Cis-9, trans-11 18:2 conjugated linoleic acid represented 0.55% total milk FA, and the major n-3 FA (linolenic acid, 18:3) composed 0.38%. Analyses for seasonal and regional effects indicated statistical differences for some FA, but these were minor from an overall human nutrition perspective as the FA profile for all samples were numerically similar. Overall, the present study provides a valuable database for current FA composition of US fluid milk, and results demonstrate that the milk fatty acid profile is remarkably consistent across geographic regions and seasons from the perspective of human dietary intake of milk fat.

Effect of preservatives on the accuracy of mid-infrared milk component testing

Our objective was to determine the effect of commonly used milk preservatives on the accuracy of fat, protein, and lactose content determination in milk by mid-infrared (mid-IR) milk analysis. Two producer raw milks (Holstein and Jersey) and 2 pasteurized modified milks, 1 similar to Holstein milk and 1 similar to Jersey milk were used as the 4 different milk sources. Seven different milk preservative approaches (K(2)Cr(2)O(7) and 6 different bronopol-based preservatives) and a portion of unpreserved milk for each of the 4 different milks sources were tested for fat B, lactose, protein, and fat A. The experiment was replicated 3 times (28 d each) for a total of 84 d. Two mid-infrared (mid-IR) transmittance milk analyzers (an optical and a virtual filter instrument) were used. A large batch of pilot milk was prepared from pasteurized, homogenized, unpreserved whole milk, split into vials, quick frozen by immersion in liquid nitrogen, and transferred into a -80 °C freezer. Pilots were thawed and analyzed on each testing day during the study. Significant increases were observed in all uncorrected readings on the pilot milks over the 84 d of the study, but the increases were gradual and small on each instrument for all components. Results from the study were corrected for these changes. A significant difference in mid-IR fat A readings was observed, whereas no differences were detected for fat B, lactose, or protein between unpreserved and preserved milks containing 0.02% K(2)Cr(2)O(7.) Therefore, K(2)Cr(2)O(7) has little or no effect on mid-IR test results. All bronopol-based preservative approaches in this study differed in mid-IR test results compared with K(2)Cr(2)O(7)-preserved and unpreserved milks, with the largest effect on protein results. Mid-IR uncorrected readings increased with time of refrigerated storage at 4°C for all preservative approaches, with the largest increase for protein. The rate of increase in uncorrected readings with time of storage was always higher for raw milks than for pasteurized milks, and the stability of instrument zero was lower for raw milks than for pasteurized milks. The largest economic effect of a systematic bias caused by a preservative occurs when the milks used for calibration and routine testing for payment do not contain the same preservative or when calibration milks are preserved and milks for routine testing are unpreserved. These effects can create errors in payment for large dairy processing plants ranging from several hundred thousand to over a million dollars annually.

High temperature, short time pasteurization temperatures inversely affect bacterial numbers during refrigerated storage of pasteurized fluid milk

The grade A Pasteurized Milk Ordinance specifies minimum processing conditions of 72 degrees C for at least 15 s for high temperature, short time (HTST) pasteurized milk products. Currently, many US milk-processing plants exceed these minimum requirements for fluid milk products. To test the effect of pasteurization temperatures on bacterial numbers in HTST pasteurized milk, 2% fat raw milk was heated to 60 degrees C, homogenized, and treated for 25 s at 1 of 4 different temperatures (72.9, 77.2, 79.9, or 85.2 degrees C) and then held at 6 degrees C for 21 d. Aerobic plate counts were monitored in pasteurized milk samples at d 1, 7, 14, and 21 postprocessing. Bacterial numbers in milk processed at 72.9 degrees C were lower than in milk processed at 85.2 degrees C on each sampling day, indicating that HTST fluid milk-processing temperatures significantly affected bacterial numbers in fluid milk. To assess the microbial ecology of the different milk samples during refrigerated storage, a total of 490 psychrotolerant endospore-forming bacteria were identified using DNA sequence-based subtyping methods. Regardless of processing temperature, >85% of the isolates characterized at d 0, 1, and 7 postprocessing were of the genus Bacillus, whereas more than 92% of isolates characterized at d 14 and 21 postprocessing were of the genus Paenibacillus, indicating that the predominant genera present in HTST-processed milk shifted from Bacillus spp. to Paenibacillus spp. during refrigerated storage. In summary, 1) HTST processing temperatures affected bacterial numbers in refrigerated milk, with higher bacterial numbers in milk processed at higher temperatures; 2) no significant association was observed between genus isolated and pasteurization temperature, suggesting that the genera were not differentially affected by the different processing temperatures; and 3) although typically present at low numbers in raw milk, Paenibacillus spp. are capable of growing to numbers that can exceed Pasteurized Milk Ordinance limits in pasteurized, refrigerated milk.

Characterization of flavor and texture development within large (291 kg) blocks of Cheddar cheese

Cheddar cheese is a natural product that has a variable flavor and texture profile. Many companies produce 291-kg blocks of Cheddar cheese, which are subsequently cut and shipped, or stored and subsequently cut. Previous research has shown that compositional differences exist within 291-kg blocks and that these differences may influence flavor and texture development. The objectives of this study were to systematically characterize flavor and texture differences within 291-kg blocks. On 2 different occasions, a 291-kg block was manufactured at each of 4 manufacturing facilities. After 7 d, the 291-kg blocks were sliced into sixteen 18-kg sample portions using a predetermined diagram, and each portion was labeled appropriately (outer corner, inner corner, etc.) and stored at 7 degrees C. Cheese from different locations within the 291-kg blocks was evaluated at 1, 4, 8, and 12 mo. At each time point, two 18-kg portions representing an inside and outside location with the 291-kg block cross-section (from inside to outside) were sampled. The moisture content was lower in the inner than outer locations within the 291-kg blocks. Protein hydrolysis was higher in the inner location and inner locations developed aged Cheddar flavors sulfur, nutty, and brothy more rapidly than the outer locations. However, plant-to-plant differences in aging were often larger than differences caused by block location. These differences were due to differences in cheese manufacturing practices among plants. Dynamic headspace results for flavor volatiles were consistent with descriptive sensory flavor results, documenting differences between inner and outer locations within 291-kg blocks. The inner locations were more fracturable and the outer locations were more cohesive and had more residual in the mouth. Inner locations had greater fracture strain than outer locations. Documenting the differences in aging of 291-kg blocks of Cheddar cheese is important in understanding how to make a consistent high-quality Cheddar cheese.

Lipolysis and Proteolysis of Modified and Producer Milks Used for Calibration of Mid-Infrared Milk Analyzers

Our objective was to determine if lipolysis or proteolysis of calibration sets during shelf life influenced the mid-infrared (MIR) readings or calibration slopes and intercepts. The lipolytic and proteolytic deterioration was measured for 3 modified milk and 3 producer milk calibration sets during storage at 4 degrees C. Modified and producer milk sets were used separately to calibrate an optical filter and virtual filter MIR analyzer. The uncorrected readings and slopes and intercepts of the calibration linear regressions for fat B, fat A, protein, and lactose were determined over 28 d for modified milks and 15 d for producer milks. It was expected that increases in free fatty acid content and decreases in the casein as a percentage of true protein of the calibration milks would have an effect on the MIR uncorrected readings, calibration slopes and intercepts, and MIR predicted readings. However, the influence of lipolysis and proteolysis on uncorrected readings was either not significant, or significant but very small. Likewise, the amount of variation accounted for by day of storage at 4 degrees C of a calibration set on the calibration slopes and intercepts was also very small. Most of the variation in uncorrected readings and calibration slopes and intercepts were due to differences between the optical filter and virtual filter analyzers and differences between the pasteurized modified milk and raw producer milk calibration sets, not due to lipolysis or proteolysis. The combined impact of lipolysis and proteolysis on MIR predicted values was <0.01% in most cases.

Modified Versus Producer Milk Calibration: Mid-Infrared Analyzer Performance Validation

Our objective was to determine the validation performance of mid-infrared (MIR) milk analyzers, using the traditional fixed-filter approach, when the instruments were calibrated with producer milk calibration samples vs. modified milk calibration samples. Ten MIR analyzers were calibrated using producer milk calibration sample sets, and 9 MIR milk analyzers were calibrated using modified milk sample sets. Three sets of 12 validation milk samples with all-laboratory mean chemistry reference values were tested during a 3-mo period. Calibration of MIR milk analyzers using modified milk increased the accuracy (i.e., better agreement with chemistry) and improved agreement between laboratories on validation milk samples compared with MIR analyzers calibrated with producer milk samples. Calibration of MIR analyzers using modified milk samples reduced overall mean Euclidian distance for all components for all 3 validation sets by at least 24% compared with MIR analyzers calibrated with producer milk sets. Calibration with modified milk sets reduced the average Euclidian distance from all-laboratory mean reference chemistry on validation samples by 40, 25, 36, and 27%, respectively for fat, anhydrous lactose, true protein, and total solids. Between-laboratory agreement was evaluated using reproducibility standard deviation (s(R)). The number of single Grubbs statistical outliers in the validation data was much higher (53 vs. 7) for the instruments calibrated with producer milk than for instruments calibrated with modified milk sets. The s(R) for instruments calibrated with producer milks (with statistical outliers removed) was similar to data collected in recent proficiency studies, whereas the s(R) for instruments calibrated with modified milks was lower than those calibrated with producer milks by 46, 52, 61, and 55%, respectively for fat, anhydrous lactose, true protein, and total solids.

Calibration of Infrared Milk Analyzers: Modified Milk Versus Producer Milk

Mid-infrared (MIR) milk analyzers are traditionally calibrated using sets of preserved raw individual producer milk samples. The goal of this study was to determine if the use of sets of preserved pasteurized modified milks improved calibration performance of MIR milk analyzers compared with calibration sets of producer milks. The preserved pasteurized modified milk sets exhibited more consistent day-to-day and set-to-set calibration slope and intercept values for all components compared with the preserved raw producer milk calibration sets. Pasteurized modified milk calibration samples achieved smaller confidence interval (CI) around the regression line (i.e., calibration uncertainty). Use of modified milk calibration sets with a larger component range, more even distribution of component concentrations within the ranges, and the lower correlation of fat and protein concentrations than producer milk calibration sets produced a smaller 95% CI for the regression line due to the elimination of moderate and high leverage samples. The CI for the producer calibration sets were about 2 to 12 times greater than the CI for the modified milk calibration sets, depending on the component. Modified milk calibration samples have the potential to produce MIR milk analyzer calibrations that will perform better in validation checks than producer milk-based calibrations by reducing the mean difference and standard deviation of the difference between instrument values and reference chemistry.

Precalibration Evaluation Procedures for Mid-Infrared Milk Analyzers

The purpose of this paper is to present a detailed account of the precalibration procedures developed and implemented by the USDA Federal Milk Market Administrators (FMMA) for evaluating mid-infrared (MIR) milk analyzers. Mid-infrared analyzers specifically designed for milk testing provide a rapid and cost-effective means for determining milk composition for payment and dairy herd improvement programs. These instruments determine the fat, protein, and lactose content of milk, and enable the calculation of total solids, solids-not-fat, and other solids. All MIR analyzers are secondary testing instruments that require calibration by chemical reference methods. Precalibration is the process of assuring that the instrument is in good working order (mechanically and electrically) and that the readings before calibration are stable and optimized. The main components of precalibration are evaluation of flow system integrity, homogenization efficiency, water repeatability, zero shift, linearity, primary slope, milk repeatability, purging efficiency, and establishment of intercorrection factors. These are described in detail and apply to both filter-based and Fourier transform infrared instruments operating using classical primary and reference wavelengths. Under the USDA FMMA Precalibration Evaluation Program, the precalibration procedures were applied longitudinally over time using a wide variety of instruments and instrument models. Instruments in this program were maintained to pass the criteria for all precalibration procedures. All instruments used similar primary wavelengths to measure fat, protein, and lactose but there were differences in reference wavelength selection. Intercorrection factors were consistent over time within all instruments and similar among groups of instruments using similar primary and reference wavelengths. However, the magnitude and sign of the intercorrection factors were significantly affected by the choice of reference wavelengths.

Interaction of Brine Concentration, Brine Temperature, and Presalting on Salt Penetration in Ragusano Cheese

Thirty-one 3.6-kg blocks of Ragusano cheese were made on each of 6 different days (in different weeks) starting with a different batch of milk on each day. On d 1, 3, and 5, the cheeses were not presalted and on d 2, 4, and 6, all cheeses were presalted (PS). One of the 31 blocks of cheese was selected at random for analysis before brine salting (i.e., on d 0). The remaining 30 blocks were randomly divided into 2 groups of 15 blocks each; one group was placed in 18% brine (18%B) and the other group was placed in saturated brine (SB). For the 15 blocks within each of the 2 brine concentrations (BC), 5 blocks were placed in a brine tank at 12 degrees C, 5 at 15 degrees C, and 5 at 18 degrees C, and submerged for 24 d. The research objective was to determine the combined impacts (i.e., interactions) of PS the curd before stretching, BC (SB vs. 18%B), and brine temperature (BT; 12, 15, and 18 degrees C) on salt uptake, moisture content, and yield of Ragusano cheese. Although BC, BT, and PS each had their own separate impacts on salt uptake, there was little interaction of these effects on salt uptake when they were used in combination. The PS most quickly delivered salt to the interior of the cheese and was the most effective approach to salting for controlling early gas formation. There were strong separate impacts of BC, BT, and PS on cheese moisture content, moisture loss, and net weight loss, with BC having the largest separate impact on these parameters. Reducing BT reduced salt content and increased moisture, but the effects were small. The more important effect of reduced BT was to reduce growth of gas forming bacteria. The 18%B produced higher moisture, and less moisture and weight loss than SB. The effect of interactions of BC, BT, and PS on moisture loss and net weight loss were small. To achieve the maximum benefit from the various approaches to salting for controlling early gas formation in Ragusano cheese, PS combined with slightly lower BT (i.e., 15 degrees C instead of 18 degrees C) should be used. Although using 18%B instead of SB did increase salt uptake, the point at which improved salt uptake occurred due to use of 18%B did not provide benefit in prevention of early gas formation, as reported separately. However, use of 18%B instead of SB provided a 9.98% increase in cheese yield due to reduced moisture loss during brining; this would be very attractive to cheese makers. The increase in yield needs to be balanced against the risk of growth of undesirable bacteria in the 18%B and the creation of another cheese quality defect.

Major Advances in Testing of Dairy Products: Milk Component and Dairy Product Attribute Testing

Milk component analysis is relatively unusual in the field of quantitative analytical chemistry because an analytical test result determines the allocation of very large amounts of money between buyers and sellers of milk. Therefore, there is high incentive to develop and refine these methods to achieve a level of analytical performance rarely demanded of most methods or laboratory staff working in analytical chemistry. In the last 25 yr, well-defined statistical methods to characterize and validate analytical method performance combined with significant improvements in both the chemical and instrumental methods have allowed achievement of improved analytical performance for payment testing. A shift from marketing commodity dairy products to the development, manufacture, and marketing of value added dairy foods for specific market segments has created a need for instrumental and sensory approaches and quantitative data to support product development and marketing. Bringing together sensory data from quantitative descriptive analysis and analytical data from gas chromatography olfactometry for identification of odor-active compounds in complex natural dairy foods has enabled the sensory scientist and analytical chemist to work together to improve the consistency and quality of dairy food flavors.

Use of microfiltration to improve fluid milk quality

The objectives of the research were to determine the growth characteristics of bacteria in commercially pasteurized skim milk as a function of storage temperature; to determine the efficacy of a microfiltration and pasteurization process in reducing the number of total bacteria, spores, and coliforms in skim milk; and to estimate the shelf life of pasteurized microfiltered skim milk as a function of storage temperature. For the first objective, commercially pasteurized skim milk was stored at 0.1, 2.0, 4.2, and 6.1 degrees C. A total bacterial count >20,000 cfu/mL was considered the end of shelf life. Shelf life ranged from 16 d at 6.1 degrees C to 66 d at 0.1 degrees C. Decreasing storage temperature increased lag time and reduced logarithmic growth rate of a mixed microbial population. The increased lag time for the mixed microbial population at a lower storage temperature was the biggest contributor to longer shelf life. For the second objective, raw skim milk was microfiltered at 50 degrees C using a Tetra Alcross M7 Pilot Plant equipped with a ceramic Membralox membrane (pore diameter of 1.4 microm). The 50 degrees C permeate was pasteurized at 72 degrees C for 15 s, and cooled to 6 degrees C. Bacterial counts of raw skim milk were determined by standard plate count. Bacterial counts of microfiltered and pasteurized microfiltered skim milk were determined using a most probable number method. Across 3 trials, bacterial counts of the raw milk were reduced from 2,400, 3,600, and 1,475 cfu/mL to 0.240, 0.918, and 0.240 cfu/mL, respectively, by microfiltration. Bacterial counts in the pasteurized microfiltered skim milk for the 3 trials were 0.005, 0.008, and 0.005 cfu/mL, respectively, demonstrating an average 5.6 log reduction from the raw count due to the combination of microfiltration and pasteurization. For the third objective, pasteurized microfiltered skim milk was stored at each of 4 temperatures (0.1, 2.0, 4.2, and 6.1 degrees C) and the total bacterial count was determined weekly over a 92-d period. At 6 time points in the study, samples were also analyzed for noncasein nitrogen and the decrease in casein as a percentage of true protein was calculated. After 92 d, 50% of samples stored at 6.1 degrees C and 12% of samples stored at 4.2 degrees C exceeded a total bacterial count of 20,000 cfu/mL. No samples stored at 0.1 or 2.0 degrees C reached a detectable bacterial level during the study. When the bacterial count was <1,000 cfu/mL, shelf life was limited because sufficient proteolysis had occurred at 32 d at 6.1 degrees C, 46 d at 4.2 degrees C, 78 d at 2.0 degrees C, and >92 d at 0.1 degrees C to produce a detectable off-flavor in skim milk produced from a raw milk with a 240,000 somatic cell count.

Yield and aging of Cheddar cheeses manufactured from milks with different milk serum protein contents

Whey proteins in general and specifically beta-lactoglobulin, alpha-lactalbumin, and immunoglobulins have been thought to decrease proteolysis in cheeses manufactured from concentrated retentates from ultrafiltration. The proteins found in whey are called whey proteins and are called milk serum proteins (SP) when they are in milk. The experiment included 3 treatments; low milk SP (0.18%), control (0.52%), and high milk SP (0.63%), and was replicated 3 times. The standardized milk for cheese making of the low milk SP treatment contained more casein as a percentage of true protein and more calcium as a percentage of crude protein, whereas the nonprotein nitrogen and total calcium content was not different from the control and high SP treatments. The nonprotein nitrogen and total calcium content of the milks did not differ because of the process used to remove the milk SP from skim milk. The low milk SP milk contained less free fatty acids (FFA) than the control and high milk SP treatment; however, no differences in FFA content of the cheeses was detected. Approximately 40 to 45% of the FFA found in the milk before cheese making was lost into the whey during cheese making. Decreasing the milk SP content of milk by 65% and increasing the content by 21% did not significantly influence general Cheddar cheese composition. Higher fat recovery and cheese yield were detected in the low milk SP treatment cheeses. There was more proteolysis in the low milk SP cheese and this may be due to the lower concentration of undenatured beta-lactoglobulin, alpha-lactalbumin, and other high molecular weight SP retained in the cheeses made from milk with low milk SP content.

Influence of Raw Milk Quality on Fluid Milk Shelf Life

Pasteurized fluid milk shelf life is influenced by raw milk quality. The microbial count and somatic cell count (SCC) determine the load of heat-resistant enzymes in milk. Generally, high levels of psychrotrophic bacteria in raw milk are required to contribute sufficient quantities of heat-stable proteases and lipases to cause breakdown of protein and fat after pasteurization. Sanitation, refrigeration, and the addition of CO2 to milk are used to control both total and psychrotrophic bacteria count. It is not uncommon for total bacterial counts of raw milk to be < 10,000 cfu/mL. In the past, fluid milk processors have not focused much attention on milk SCC. Increased SCC is correlated with increased amounts of heat-stable protease (plasmin) and lipase (lipoprotein lipase) in milk. When starting with raw milk that has a low bacterial count, and in the absence of microbial growth in pasteurized milk, enzymes associated with high SCC will cause protein and fat degradation during refrigerated storage, and produce off-flavors. As the ability to kill, remove, or control microbial growth in pasteurized refrigerated milk continues to improve, the original milk SCC will be the factor limiting the time of refrigerated storage before development of an off-flavor in milk. Most healthy cows in a dairy herd have a milk SCC < 50,000 cell/mL. Bulk tank SCC > 200,000 cell/mL are usually due to the contribution of high SCC milk from a small number of cows in the herd. Technology to identify these cows and keep their milk out of the bulk tank could substantially increase the value of the remaining milk for use in fluid milk processing. To achieve a 60- to 90-d shelf life of refrigerated fluid milk, fluid processors and dairy farmers need to work together to structure economic incentives that allow farmers to produce milk with the SCC needed for extended refrigerated shelf life.

Flavor Profiles of Full-Fat and Reduced-Fat Cheese and Cheese Fat Made from Aged Cheddar with the Fat Removed Using a Novel Process

Many consumers are concerned with fat intake. However, many reduced-fat foods, including reduced-fat cheese, lack robust flavors. The objectives of this study were to characterize the flavors found in full-fat cheese, cheese fat, and reduced-fat cheese made from aged Cheddar using a novel process to remove the fat (Nelson and Barbano, 2004). Two full-fat, aged cheeses (9 and 39 mo) were selected, and the fat was removed using the novel fat removal process. Full-fat cheeses, shredded and reformed full-fat cheeses, corresponding reduced-fat cheeses, and cheese fats were then analyzed using descriptive sensory and instrumental analysis followed by consumer acceptance testing. Cheeses were extracted with diethyl ether followed by isolation of volatile material by high vacuum distillation. Volatile extracts were analyzed using gas chromatography/ olfactometry with aroma extract dilution analysis. Selected compounds were quantified. The 39-mo cheese was characterized by fruity and sulfur notes, and the 9-mo-old cheese was characterized by a spicy/brothy flavor. Reduced-fat cheeses had similar flavor profiles with no difference in most sensory attributes to corresponding full-fat cheeses. Sensory profiles of the cheese fats were characterized by low intensities of the prominent flavors found in the full-fat cheeses. Instrumental analysis revealed similar trends. Consistent with sensory analysis, there were lower concentrations and log(3) flavor dilution factors for most compounds in the cheese fats compared with both the reduced- and full-fat cheeses, regardless of compound polarity. Consumers found the intensity of flavor in the reduced-fat cheese to be equal to the full-fat cheeses. This study demonstrated that when fat was removed from aged full-fat Cheddar cheese, most of the flavor and flavor compounds remained in the cheese and were not removed with the fat.

Composition, Microstructure, and Surface Barrier Layer Development During Brine Salting

The goal of this study was to characterize the changes in chemical composition, porosity, and structure that occur at the surface of a block of brine-salted cheese and their relationship to the rate at which salt is taken up from the brine. To create a difference in composition, salt uptake, and barrier layer properties, identical blocks of Ragusano cheese were placed in saturated and 18% salt brine at 18 degrees C for 12 d. The overall moisture content and porosity decreased, whereas salt and salt in moisture content increased near the surface of blocks of brine-salted Ragusano cheese for all treatments. The general appearance of the microstructure of the surface of the blocks of brine-salted cheese was much more compact than the microstructure 1 mm inside the block at both brine concentrations. Large differences in porosity of the barrier layer were produced by brine-salting cheese in 18% vs. saturated brine, with cheese in saturated brine having much lower porosity at the surface and taking up much less salt during brining. The macro network of water channels within the microstructure of the cheese was less open near the surface of the block for cheese in both saturated and 18% brine after 4 d. However, no large differences in the size of the macro channels in the cheese structure due to the difference in brine concentration were observed by scanning electron microscopy. It is possible that the shrinkage of the much smaller pore structure within the casein matrix of the cheese is more important and will become more limiting to the rate of salt diffusion. Further microstructure work at higher resolution is needed to answer this question. The calculated decrease in porosity at the exterior 1-mm portion of the block was 50.8 and 29.2% for cheeses that had been in saturated vs. 18% brine for 12 d, respectively. The difference in brine concentration had a very large impact on the salt in moisture content of the cheese. The exterior of the cheese in 18% brine reached a salt in moisture content almost identical to that of the brine very quickly (17.3% at 4 d), whereas the salt in moisture content at the surface of the cheese block in saturated brine was only 11.9% at 4 d. There appears to be some critical concentration of salt in brine above which there is a large negative impact on salt uptake due to the creation of a barrier layer at the surface of the block of cheese.

A Microfiltration Process to Maximize Removal of Serum Proteins from Skim Milk Before Cheese Making

Microfiltration (MF) is a membrane process that can separate casein micelles from milk serum proteins (SP), mainly beta-lactoglobulin and alpha-lactalbumin. Our objective was to develop a multistage MF process to remove a high percentage of SP from skim milk while producing a low concentration factor retentate from microfiltration (RMF) with concentrations of soluble minerals, nonprotein nitrogen (NPN), and lactose similar to the original skim milk. The RMF could be blended with cream to standardize milk for traditional Cheddar cheese making. Permeate from ultrafiltration (PUF) obtained from the ultrafiltration (UF) of permeate from MF (PMF) of skim milk was successfully used as a diafiltrant to remove SP from skim milk before cheese making, while maintaining the concentration of lactose, NPN, and nonmicellar calcium. About 95% of the SP originally in skim milk was removed by combining one 3 x MF stage and two 3 x PUF diafiltration stages. The final 3 x RMF can be diluted with PUF to the desired concentration of casein for traditional cheese making. The PMF from the skim milk was concentrated in a UF system to yield an SP concentrate with protein content similar to a whey protein concentrate, but without residuals from cheese making (i.e., rennet, culture, color, and lactic acid) that can produce undesirable functional and sensory characteristics in whey products. Additional processing steps to this 3-stage MF process for SP removal are discussed to produce an MF skim retentate for a continuous cottage cheese manufacturing process.

Flavor and stability of pasteurized milk with elevated levels of conjugated linoleic acid and vaccenic acid

The objectives of this study were to determine if flavor differences between 2% fat pasteurized milks with and without naturally enhanced vaccenic acid (VA) and cis-9, trans-11 conjugated linoleic acids (CLA) levels could be detected over the commercial shelf life of the product and to determine if milk with elevated VA and cis-9, trans-11 CLA levels was more susceptible to development of light-induced oxidative flavor defects. Cows were fed a control diet or the same ration supplemented with 2% soybean oil and 1% fish oil (CLA diet). The milk, standardized to 2% fat, was pasteurized, homogenized, and stored in plastic containers at 4 degrees C. Oxidation was induced by exposing half of the containers to light. Testing was conducted at 1, 7, and 14 d postpasteurization. Average cis-9, trans-11 CLA content of the milks from the control and CLA diet groups was 0.52 and 4.74 g/100 g of fatty acids, respectively (8-fold increase). Average VA content of the milk from the control and CLA diet groups was 1.43 and 12.06 g/100 g of fatty acids, respectively (7.5-fold increase). Together, VA plus CLA represented almost 17% of the total milk fatty acids. There was no effect of light exposure on fatty acid composition initially or over the 14-d storage period. Although VA, cis-9, trans-11 CLA, and degree of unsaturation were significantly elevated in the milk from the CLA diet group, untrained panelists were unable to detect flavor differences initially or over time in 15 of 16 triangle test evaluations. Similarly, sensory results indicated no difference in susceptibility to the development of oxidized off-flavors between the milk from the control and CLA diet groups, even when oxidation was induced by light exposure.

Impact of Milk Preacidification with CO2 on the Aging and Proteolysis of Cheddar Cheese

To determine the influence of milk preacidification with CO(2) on Cheddar cheese aging and proteolysis, cheese was manufactured from milk with and without added CO(2). The experiment was replicated 3 times. Carbon dioxide (approximately 1600 ppm) was added to the cold milk, resulting in a milk pH of 5.9 at 31 degrees C in the cheese vat. The starter and coagulant usage rates were equal for the control and CO(2) treatment cheeses. The calcium content of the CO(2) treatment cheese was lower, but no difference in moisture content was detected. The higher CO(2) content of the treatment cheeses (337 vs. 124 ppm) was maintained throughout 6 mo of aging. In spite of having almost one and a half times the salt-in-moisture, proteolysis as measured by pH 4.6 and 12% trichloroacetic acid soluble nitrogen expressed as percentages of total nitrogen, was higher in the CO(2) treatment cheeses throughout aging. The ratio of alpha(s)-casein (CN) to para-kappa-CN decreased faster in the CO(2) treatment cheeses than in the control cheeses, especially before refrigerated storage. No difference was detected in the ratio of beta-CN to para-kappa-CN between the control and CO(2) treatment cheeses. Intact alpha(s)- and beta-CN were found in the expressible serum (ES) from the CO(2) treatment cheese as well as alpha(s1)-I-CN, but they were not detected in the ES from the control cheese. No CN was detected in the ES from the curd before the salting of either the control or CO(2) treatment cheese. Higher proteolysis in the cheese made from milk preacidified with CO(2) may have been due to increased substrate availability in the water phase or increased chymosin activity or retention in the cheese.

Impact of Milk Preacidification with CO2 on Cheddar Cheese Composition and Yield

Preacidification of milk for cheese making may have a beneficial impact on increasing proteolysis during cheese aging. Unlike other acids, CO(2) can easily be removed from whey. The objectives of this work were to determine the effect of milk preacidification on Cheddar cheese composition, the recovery of individual milk components, and yield. Carbon dioxide was injected inline after the cooling section of the pasteurizer. Cheeses with and without added CO(2) were made simultaneously from the same batch of milk. This procedure was replicated 3 times. Carbon dioxide in the cheese milk was about 1600 ppm, which resulted in a milk pH of about 5.9 at 31 degrees C. The starter culture and coagulant addition rates were the same for both the CO(2) treatment and the control. The whey pH at draining of the CO(2) treatment was lower than the control. Total make time was shorter for the CO(2) treatment compared with the control. Cheese manufactured from milk acidified with CO(2) retained less of the total calcium and fat than the control cheese. The higher fat loss was primarily in the whey at draining. Preacidification with CO(2) did not alter the crude protein recovery in the cheese. The CO(2) treatment resulted in a higher added salt recovery in the cheese and produced a cheese that contained too much salt. Considering the higher added salt retention, the salt application rate could be lowered to achieve a typical cheese salt content. Cheese yield efficiency of the CO(2) treated milk was 4.4% lower than the control due to fat loss. Future work will focus on modifying the make procedure to achieve a normal fat loss into the whey when CO(2) is added to milk.

Influence of Brine Concentration, Brine Temperature, and Presalting on Early Gas Defects in Raw Milk Pasta Filata Cheese

Thirty-one 3.8-kg blocks of Ragusano cheese were made on each of 6 d starting with a different batch of raw milk on each day. On d 1, 3, and 5, cheeses were not presalted and on d 2, 4, and 6, all cheeses were presalted. Before brine salting, one of the 31 blocks of cheese was selected at random for analysis (i.e., at d 0). The remaining 30 blocks were randomly divided into 2 batches of 15 blocks each, one group was placed in 18% brine, and the other group was placed in saturated brine. For the 15 blocks within each of the 2 brine concentrations, 5 blocks each were placed in brine tanks at 12, 15, and 18 degrees C. Cheese blocks were sampled immediately before brine salting (d 0) and after 1, 4, 8, 16, and 24 d of brine salting. Presalting the curd with 2% added salt before stretching reduced the coliform count in the cheese by 1.41 log and resulted in a major reduction in early gas formation. Across all treatments in the present study, the average reduction in gas formation due to presalting was 75%. Reducing brine temperature had the second largest impact on reducing gas production, but did not reduce the coliform count in the cheese. Reducing brine temperature from 18 to 12 degrees C made a larger reduction in early gas formation in cheeses that were not presalted (from 6.8 to 1.8% gas holes, respectively) than in cheeses that were presalted (from 1.9 to 0.5% gas holes, respectively). To achieve the same absolute level of gas production in the nonpre-salted cheese as was achieved in presalted cheese in combination with 18 degrees C brine, the brine temperature for the nonpresalted cheese had to be lowered from 18 to 12 degrees C. Reducing brine concentration, although effective at increasing the rate of salt penetration into the block, did not have any impact on coliform count and had minimal impact on reducing gas production. The condition where reducing brine concentration was able to make a reduction in gas production was for cheeses that were not presalted and brined at 18 degrees C. Presalting is a very simple and practical approach to reducing the problem of early gas formation in combination with strategies to improve milk quality and cheese making conditions. Further work is needed to understand the impact of different levels of presalting on death of coliforms and gas production in the cheese.

Composition and aroma compounds of Ragusano cheese: native pasture and total mixed rations

Raw milk from 13 cows fed TMR supplemented with native pasture and from 13 cows fed only TMR on one farm was collected separately 4 times with an interval of 15 d between collections. Two blocks (14 kg each) of cheese were made from each milk. The objective was to determine the influence of consumption of native plants in Sicilian pastures on the aroma compounds present in Ragusano cheese. Milk from cows that consumed native pasture plants produced cheeses with more odor-active compounds. In 4-mo-old cheese made from milk of pasture-fed cows, 27 odor-active compounds were identified, whereas only 13 were detected in cheese made from milk of total mixed ration-fed cows. The pasture cheeses were much more rich in odor-active aldehyde, ester, and terpenoid compounds than cheeses from cows fed only total mixed ration. A total of 8 unique aroma-active compounds (i.e., not reported in other cheeses evaluated by gas chromatography olfactory) were detected in Ragusano cheese made from milk from cows consuming native Sicilian pasture plants. These compounds were 2 aldehydes ([E,E]-2,4-octadienal and dodecanal), 2 esters (geranyl acetate and [E]-methyl jasmonate), 1 sulfur compound (methionol), and 3 terpenoid compounds (1-carvone, L(-) carvone, and citronellol). Geranyl acetate and (E)-methyl jasmonate were particularly interesting because these compounds are released from fresh plants as they are being damaged and are part of a possible plant defense mechanism against damage from insects. Most of the odor-active compounds that were unique in Ragusano cheese from pasture-fed cows appeared to be compounds created by oxidation processes in the plants that may have occurred during foraging and ingestion by the cow. Some odor-active compounds were consistently present in pasture cheeses that were not detected in the total mixed ration cheeses or in the 14 species of pasture plants analyzed. Either these compounds were present in other plants not analyzed, created in the rumen or in cheese after the pasture-plant material had been consumed, or the compounds were lost in the method of sample extraction used for the plant analysis (i.e., steam distillation) versus the solid-phase microextraction method used for the cheeses. This research has demonstrated clearly that some unique odor-active compounds found in pasture plants can be transferred to the cheese.

Lipolysis and Proteolysis in Ragusano Cheese During Brine Salting at Different Temperatures

The influence of temperature (12, 15, 18, 21, and 24 degrees C) of saturated brine on lipolysis and proteolysis in 3.8-kg blocks of Ragusano cheese during 24 d of brining was determined. Twenty-six 3.8-kg blocks were made on each day. The cheese making was replicated on 3 different days. All blocks were labeled and weighed prior to brining. One block was sampled and analyzed prior to brine salting. Five blocks were placed into each of 5 different brine tanks at different temperatures. One block was removed from each brine tank after 1, 4, 8, 16, and 24 d of brining, weighed, sampled, and analyzed. Both proteolysis and lipolysis in Ragusano cheese increased with increasing brine temperature (from 12 to 24 degrees C), with the impact of brine temperature on proteolysis and lipolysis becoming progressively larger. Proteolysis was highest in the interior of the blocks where salt in moisture content was lowest and temperature had more impact on proteolysis in the interior position of the block than the exterior position. However, the opposite was true for lipolysis. The total free fatty acid content was higher and temperature had more impact on lipolysis at the exterior position of the block where salt in moisture was the highest. This effect of increased salt concentration on lipolysis was confirmed with direct salted cheeses in a small follow-up experiment. Lipolysis increased with increasing salt in the moisture content of the direct salted cheeses. It is likely that migration of water-soluble FFA from the brine into the cheese and from the interior portion of the cheese to the exterior portion of the cheese also contributed to a higher level of FFA at the exterior portion of the blocks. As brine temperature increased the profile of individual free fatty acids released from triglycerides changed, with the proportion of short-chain free fatty acids increasing with increasing brine temperature. This effect was largest at high salt in moisture content.

Measurement of gas holes and mechanical openness in cheese by image analysis

A method to measure the amount of the surface area of cheese slices occupied by gas holes was developed to reflect the relative gas production among different cheeses. A digital camera mounted on a copy stand with lighting was used to make digital images of each slice of cheese. A commercial digital image analysis software program was used and an algorithm was written to measure the area of the image of the cheese slice occupied by holes. The image was cropped and scanned to determine which color channel produced the best image contrast. The MATLAB program allowed the user to eliminate mechanical openness or false holes and then to scan the image to produce a percent distribution of pixels in the image as a function of pixel intensity. The user then determined a threshold value to differentiate pixels that were in holes from those representing areas with no holes. The percentage of the total surface area occupied by holes was calculated. The coefficient of variation of the method ranged from 2.43% with gas holes of about 1% of the surface of the cheese slice to a coefficient of variation of 0.92% with gas holes of about 6.8% of the surface area of the cheese slice. Examples of applications of this method are given for Emmental, Ragusano, and Cheddar cheeses. The method can be used as a tool in research studies to correlate the amount of gas production with manufacturing conditions or as a quality control tool in cheese manufacturing.

Reduced-Fat Cheddar Cheese Manufactured Using a Novel Fat Removal Process

Normally, reduced-fat Cheddar cheese is made by removal of fat from milk prior to cheese making. Typical aged flavor may not develop when 50% reduced-fat Cheddar cheese is produced by this approach. Moreover, the texture of the reduced-fat cheeses produced by the current method may often be hard and rubbery. Previous researchers have demonstrated that aged Cheddar cheese flavor intensity resides in the water-soluble fraction. Therefore, we investigated the feasibility of fat removal after the aging of Cheddar cheese. We hypothesized the typical aged cheese flavor would remain with the cheese following fat removal. A physical process for the removal of fat from full-fat aged Cheddar cheese was developed. The efficiency of fat removal at various temperatures, gravitational forces, and for various durations of applied forces was determined. Temperature had the greatest effect on the removal of fat. Gravitational force and the duration of applied force were less important at higher temperatures. A positive linear relationship between temperature and fat removal was observed from 20 to 33 degrees C. Conditions of 30 degrees C and 23,500 x g for 5 min removed 50% of the fat. The removed fat had some aroma but little or no taste. The fatty acid composition, triglyceride molecular weight distribution, and melting profile of the fat retained in the reduced-fat cheeses were all consistent with a slight increase in the proportion of saturated fat relative to the full-fat cheeses. The process of fat removal decreased the grams of saturated fat per serving of cheese from 6.30 to 3.11 g. The flavor intensity of the reduced-fat cheeses were at least as intense as the full-fat cheeses.

Contribution of Native Pasture to the Sensory Properties of Ragusano Cheese

Ragusano is a Protected Denomination of Origin cheese produced in the Hyblean area of Sicily. Sixteen samples of Ragusano cheese from two different treatments [pasture and total mixed ration (TMR)] were evaluated after 4 and 7 mo of aging. The color of the cheeses produced from milk of cows consuming fresh native pasture plants was much more yellow than cheeses from TMR fed cows (i.e., higher Hunter b value). This was due to transfer of beta-carotene and related compounds from the diet and demonstrated that compounds from native pasture plants changed the sensory characteristics of Ragusano cheese. To avoid a "halo" effect in a trained panel, quantitative descriptive analysis sensory evaluation of these cheeses for odor, taste, consistency, and mouth structure, color differences among cheeses were masked. A unique approach in sensory analysis was developed using sunglasses with lenses designed to block light at the specific wavelengths at which panelists would detect differences in color among samples. Testing was conducted every 2-wk period (15-d increments) with two tests per week using 11 trained panelists. All the panelists tasted all the products. Panelists were able to detect significant differences in the sensory characteristics of cheeses produced from milk of cows consuming native pastures versus TMR even when the color difference was masked.

Production responses of dairy cows to dietary supplementation with conjugated linoleic acid (CLA) during the transition period and early lactation

Holstein cows (n = 30) entering second or greater lactation were fed fat supplements (90 g/d of fatty acids) consisting of Ca salts of either palm fatty acid distillate (control) or a mixture of palm fatty acid distillate and mixed isomers of conjugated linoleic acid (CLA, 30.4 g/ d) from 2 wk prepartum through 20 wk postpartum to determine whether CLA would inhibit milk fat synthesis during early lactation and, in turn, affect energy metabolism of dairy cows during the transition period and early lactation. Feeding CLA did not affect DMI or plasma concentrations of glucose, nonesterfied fatty acids, or beta-hydroxbutyrate during the prepartum period and did not affect postpartum DMI. Feeding CLA reduced milk fat content by 12.5% during early lactation; however, cows fed CLA tended to produce approximately 3 kg/d more milk during the first 20 wk of lactation. Feeding CLA tended to decrease the contribution of short- and medium-chain (C < or = 16) fatty acids to milk fat. Changes in milk yield, milk fat content, and milk fatty acid composition were not apparent until after the second week of lactation. Yield of 3.5% fat-corrected milk, milk protein content, milk protein composition, and calculated energy balance were not affected by treatment. Postpartum concentrations of glucose, nonesterfied fatty acids, and beta-hydroxbutyrate in plasma and hepatic content of glycogen and triglycerides were similar between treatments. These data imply that with CLA treatment in early lactation, dairy cows decreased milk fat synthesis and appeared to respond by partitioning more nutrients toward milk synthesis rather than improving net energy balance.

Milk pH as a Function of CO2 Concentration, Temperature, and Pressure in a Heat Exchanger

Raw skim milk, with or without added CO2, was heated, held, and cooled in a small pilot-scale tubular heat exchanger (372 ml/min). The experiment was replicated twice, and, for each replication, milk was first carbonated at 0 to 1 degree C to contain 0 (control), 600, 1200, 1800, and 2400 ppm added CO2 using a continuous carbonation unit. After storage at 0 to 1 degree C, portions of milk at each CO2 concentration were heated to 40, 56, 72, and 80 degrees C, held at the desired temperature for 30 s (except 80 degrees C, holding 20 s) and cooled to 0 to 1 degree C. At each temperature, five pressures were applied: 69, 138, 207, 276, and 345 kPa. Pressure was controlled with a needle valve at the heat exchanger exit. Both the pressure gauge and pH probe were inline at the end of the holding section. Milk pH during heating depended on CO2 concentration, temperature, and pressure. During heating of milk without added CO2, pH decreased linearly as a function of increasing temperature but was independent of pressure. In general, the pH of milk with added CO2 decreased with increasing CO2 concentration and pressure. For milk with added CO2, at a fixed CO2 concentration, the effect of pressure on pH decrease was greater at a higher temperature. At a fixed temperature, the effect of pressure on pH decrease was greater for milk with a higher CO2 concentration. Thermal death of bacteria during pasteurization of milk without added CO2 is probably due not only to temperature but also to the decrease in pH that occurs during the process. Increasing milk CO2 concentration and pressure decreases the milk pH even further during heating and may further enhance the microbial killing power of pasteurization.