Uncovering temperature-dependent exciton-polariton relaxation mechanisms in hybrid organic-inorganic perovskites

Hybrid perovskites have emerged as a promising material candidate for exciton-polariton (polariton) optoelectronics. Thermodynamically, low-threshold Bose-Einstein condensation requires efficient scattering to the polariton energy dispersion minimum, and many applications demand precise control of polariton interactions. Thus far, the primary mechanisms by which polaritons relax in perovskites remains unclear. In this work, we perform temperature-dependent measurements of polaritons in low-dimensional perovskite wedged microcavities achieving a Rabi splitting of [Formula: see text] = 260 ± 5 meV. We change the Hopfield coefficients by moving the optical excitation along the cavity wedge and thus tune the strength of the primary polariton relaxation mechanisms in this material. We observe the polariton bottleneck regime and show that it can be overcome by harnessing the interplay between the different excitonic species whose corresponding dynamics are modified by strong coupling. This work provides an understanding of polariton relaxation in perovskites benefiting from efficient, material-specific relaxation pathways and intracavity pumping schemes from thermally brightened excitonic species.

Maximizing the external radiative efficiency of hybrid perovskite solar cells

Despite rapid advancements in power conversion efficiency in the last decade, perovskite solar cells still perform below their thermodynamic efficiency limits. Non-radiative recombination, in particular, has limited the external radiative efficiency and open circuit voltage in the highest performing devices. We review the historical progress in enhancing perovskite external radiative efficiency and determine key strategies for reaching high optoelectronic quality. Specifically, we focus on non-radiative recombination within the perovskite layer and highlight novel approaches to reduce energy losses at interfaces and through parasitic absorption. By strategically targeting defects, it is likely that the next set of record-performing devices with ultra-low voltage losses will be achieved.

M13 Virus-Based Framework for High Fluorescence Enhancement

Fluorescence imaging is a powerful tool for studying biologically relevant macromolecules, but its applicability is often limited by the fluorescent probe, which must demonstrate both high site-specificity and emission efficiency. In this regard, M13 virus, a versatile biological scaffold, has previously been used to both assemble fluorophores on its viral capsid with molecular precision and to also target a variety of cells. Although M13-fluorophore systems are highly selective, these complexes typically suffer from poor molecular detection limits due to low absorption cross-sections and moderate quantum yields. To overcome these challenges, a coassembly of the M13 virus, cyanine 3 dye, and silver nanoparticles is developed to create a fluorescent tag capable of binding with molecular precision with high emissivity. Enhanced emission of cyanine 3 of up to 24-fold is achieved by varying nanoparticle size and particle-fluorophore separation. In addition, it is found that the fluorescence enhancement increases with increasing dye surface density on the viral capsid. Finally, this highly fluorescent probe is applied for in vitro staining of E. coli. These results demonstrate an inexpensive framework for achieving tuned fluorescence enhancements. The methodology developed in this work is potentially amendable to fluorescent detection of a wide range of M13/cell combinations.

The Role of Excitation Energy in Photobrightening and Photodegradation of Halide Perovskite Thin Films

We study the impact of excitation energy on the photostability of methylammonium lead triiodide (CH₃NH₃PbI₃ or MAPI) perovskite thin films. Light soaking leads to a transient increase of the photoluminescence efficiency at excitation wavelengths longer than 520 nm, whereas light-induced degradation occurs when exciting the films with wavelengths shorter than 520 nm. X-ray diffraction and extinction measurements reveal the light-induced decomposition of CH₃NH₃PbI₃ to lead iodide (PbI₂) for the high-energy excitation regime. We propose a model explaining the energy dependence of the photostability that involves the photoexcitation of residual PbI₂ species in the perovskite triggering the decomposition of CH₃NH₃PbI₃.

Tracking Photoexcited Carriers in Hybrid Perovskite Semiconductors: Trap-Dominated Spatial Heterogeneity and Diffusion

We use correlated confocal and wide-field fluorescence microscopy to probe the interplay between local variations in charge carrier recombination and charge carrier transport in methylammonium lead triiodide perovskite thin films. We find that local photoluminescence variations present in confocal imaging are also observed in wide-field imaging, while intensity-dependent confocal measurements show that the heterogeneity in nonradiative losses observed at low excitation powers becomes less pronounced at higher excitation powers. Both confocal and wide-field images show that carriers undergo anisotropic diffusion due to differences in intergrain connectivity. These data are all qualitatively consistent with trap-dominated variations in local photoluminescence intensity and with grain boundaries that exhibit varying degrees of opacity to carrier transport. We use a two-dimensional kinetic model to simulate and compare confocal time-resolved photoluminescence decay traces with experimental data. The simulations further support the assignment of local variations in nonradiative recombination as the primary cause of photoluminescence heterogeneity in the films studied herein. These results point to surface passivation and intergrain connectivity as areas that could yield improvements in perovskite solar cells and optoelectronic device performance.

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells

The solution processing of polycrystalline perovskite films introduces trap states that can adversely affect their optoelectronic properties. Motivated by the use of small-molecule surfactants to improve the optoelectronic performance of perovskites, we demonstrate the use of polymers with coordinating groups to improve the performance of solution-processed semiconductor films. The use of these polymer modifiers results in a marked change in the electronic properties of the films, as measured by both carrier dynamics and overall device performance. The devices grown with the polymer poly(4-vinylpyridine) (PVP) show significantly enhanced power conversion efficiency from 16.9 ± 0.7% to 18.8 ± 0.8% (champion efficiency, 20.2%) from a reverse scan and stabilized champion efficiency from 17.5 to 19.1% [under a bias of 0.94 V and AM (air mass) 1.5-G, 1-sun illumination over 30 min] compared to controls without any passivation. Treating the perovskite film with PVP enables a V_OC of up to 1.16 V, which is among the best reported for a CH₃NH₃PbI₃ perovskite solar cell and one of the lowest voltage deficits reported for any perovskite to date. In addition, perovskite solar cells treated with PVP show a long shelf lifetime of up to 90 days (retaining 85% of the initial efficiency) and increased by a factor of more than 20 compared to those without any polymer (degrading to 85% after ~4 days). Our work opens up a new class of chemical additives for improving perovskite performance and should pave the way toward improving perovskite solar cells for high efficiency and stability.

Electrical Detection of Quantum Dot Hot Electrons Generated via a Mn2+-Enhanced Auger Process

An all-solid-state quantum-dot-based photon-to-current conversion device is demonstrated that selectively detects the generation of hot electrons. Photoexcitation of Mn²⁺-doped CdS quantum dots embedded in the device is followed by efficient picosecond energy transfer to Mn²⁺ with a long-lived (millisecond) excited-state lifetime. Electrons injected into the QDs under applied bias then capture this energy via Auger de-excitation, generating hot electrons that possess sufficient energy to escape over a ZnS blocking layer, thereby producing current. This electrically detected hot-electron generation is correlated with a quench in the steady-state Mn²⁺ luminescence and the introduction of a new nonradiative excited-state decay process, consistent with electron-dopant Auger cross-relaxation. The device's efficiency at detecting hot-electron generation provides a model platform for the study of hot-electron ionization relevant to the development of novel photodetectors and alternative energy-conversion devices.

Photo-induced halide redistribution in organic-inorganic perovskite films

Organic–inorganic perovskites such as CH₃NH₃PbI₃ are promising materials for a variety of optoelectronic applications, with certified power conversion efficiencies in solar cells already exceeding 21%. Nevertheless, state-of-the-art films still contain performance-limiting non-radiative recombination sites and exhibit a range of complex dynamic phenomena under illumination that remain poorly understood. Here we use a unique combination of confocal photoluminescence (PL) microscopy and chemical imaging to correlate the local changes in photophysics with composition in CH₃NH₃PbI₃ films under illumination. We demonstrate that the photo-induced ‘brightening' of the perovskite PL can be attributed to an order-of-magnitude reduction in trap state density. By imaging the same regions with time-of-flight secondary-ion-mass spectrometry, we correlate this photobrightening with a net migration of iodine. Our work provides visual evidence for photo-induced halide migration in triiodide perovskites and reveals the complex interplay between charge carrier populations, electronic traps and mobile halides that collectively impact optoelectronic performance.

Visual evidence for photo-induced ionic migration in perovskite films without contacts is lacking. Here, the authors use a unique combination of confocal photoluminescence microscopy and chemical imaging to correlate the local changes in photophysics with composition in CH₃NH₃PbI₃ films under illumination.

Design rules for the broad application of fast (<1 s) methylamine vapor based, hybrid perovskite post deposition treatments

While organo-metal halide perovskite photovoltaics have seen rapid development, growth of high quality material remains a challenge.

Enhanced optoelectronic quality of perovskite thin films with hypophosphorous acid for planar heterojunction solar cells

Solution-processed metal halide perovskite semiconductors, such as CH₃NH₃PbI₃, have exhibited remarkable performance in solar cells, despite having non-negligible density of defect states. A likely candidate is halide vacancies within the perovskite crystals, or the presence of metallic lead, both generated due to the imbalanced I/Pb stoichiometry which could evolve during crystallization. Herein, we show that the addition of hypophosphorous acid (HPA) in the precursor solution can significantly improve the film quality, both electronically and topologically, and enhance the photoluminescence intensity, which leads to more efficient and reproducible photovoltaic devices. We demonstrate that the HPA can reduce the oxidized I₂ back into I⁻, and our results indicate that this facilitates an improved stoichiometry in the perovskite crystal and a reduced density of metallic lead.

An imbalance in I/Pb stoichiometry is thought to lead to defects in metal halide films. Here, Zhang et al. show that the addition of hypophosphorous acid in the precursor solution can significantly improve the film quality and enhance the photoluminescence intensity, leading to improved photovoltaic devices.

The Importance of Moisture in Hybrid Lead Halide Perovskite Thin Film Fabrication

Moisture, in the form of ambient humidity, has a significant impact on methylammonium lead halide perovskite films. In particular, due to the hygroscopic nature of the methylammonium component, moisture plays a significant role during film formation. This issue has so far not been well understood and neither has the impact of moisture on the physical properties of resultant films. Herein, we carry out a comprehensive and well-controlled study of the effect of moisture exposure on methylammonium lead halide perovskite film formation and properties. We find that films formed in higher humidity atmospheres have a less continuous morphology but significantly improved photoluminescence, and that film formation is faster. In photovoltaic devices, we find that exposure to moisture, either in the precursor solution or in the atmosphere during formation, results in significantly improved open-circuit voltages and hence overall device performance. We then find that by post-treating dry films with moisture exposure, we can enhance photovoltaic performance and photoluminescence in a similar way. The enhanced photoluminescence and open-circuit voltage imply that the material quality is improved in films that have been exposed to moisture. We determine that this improvement stems from a reduction in trap density in the films, which we postulate to be due to the partial solvation of the methylammonium component and "self-healing" of the perovskite lattice. This work highlights the importance of controlled moisture exposure when fabricating high-performance perovskite devices and provides guidelines for the optimum environment for fabrication. Moreover, we note that often an unintentional water exposure is likely responsible for the high performance of solar cells produced in some laboratories, whereas careful synthesis and fabrication in a dry environment will lead to lower-performing devices.

Zr Incorporation into TiO2 Electrodes Reduces Hysteresis and Improves Performance in Hybrid Perovskite Solar Cells while Increasing Carrier Lifetimes

We investigate zirconium (Zr) incorporation into the titanium dioxide (TiO2) electron-transporting layer used in organometal halide perovskite photovoltaics. Compared to Zr-free controls, solar cells employing electrodes containing Zr exhibit increased power conversion efficiency (PCE) and decreased hysteresis. We use transient photovoltage and photocurrent extraction to measure carrier lifetimes and densities and observe longer carrier lifetimes and higher charge densities in devices on Zr-containing electrodes at microsecond times as well as longer persistent photovoltages extending from ∼milliseconds to tens of seconds. We characterize the surface stoichiometry and change in work function and reduction potential of the TiO2 upon incorporation of Zr and discuss the charge recombination at the TiO2 interface in the context of these variables. Finally, we show that the combination of Zr-TiO2 electrode modification with device pyridine treatment leads to a cumulative improvement in performance.

Hot Hole Transfer Increasing Polaron Yields in Hybrid Conjugated Polymer/PbS Blends

We use quasi-steady-state photoinduced absorption (PIA) to study charge generation in blends of poly(3-hexylthiophene-2,5-diyl) (P3HT) with PbS nanocrystal quantum dots as a function of excitation energy. We find that, per photon absorbed, the yield of photogenerated holes present on the conjugated polymer increases with pump energy, even at wavelengths where only the quantum dots absorb. We interpret this result as direct evidence for transfer of hot holes in these conjugated polymer/quantum dot blends. These results help understand the operation of hybrid organic/inorganic photovoltaics.