Interface Manipulations Using Cross-Linked Underlayers and Surface-Active Diblock Copolymers to Extend Morphological Diversity in High-χ Diblock Copolymer Thin Films

Top and bottom interfaces of high-χ cylinder-forming polystyrene-block-maltoheptaose (PS-b-MH) diblock copolymer (BCP) thin films are manipulated using cross-linked copolymer underlayers and a fluorinated phase-preferential surface-active polymer (SAP) additive to direct the self-assembly (both morphology and orientation) of BCP microdomains into sub-10 nm patterns. A series of four photo-cross-linkable statistical copolymers with various contents of styrene, a 4-vinylbenzyl azide cross-linker, and a carbohydrate-based acrylamide are processed into 15 nm-thick cross-linked passivation layers on silicon substrates. A partially fluorinated analogue of the PS-b-MH phase-preferential SAP additive is designed to tune the surface energy of the top interface. The self-assembly of PS-b-MH thin films on top of different cross-linked underlayers and including 0-20 wt % of SAP additive is investigated by atomic force microscopy and synchrotron grazing incidence small-angle X-ray scattering analysis. The precise manipulation of the interfaces of ca. 30 nm thick PS-b-MH films not only allows the control of the in-plane/out-of-plane orientation of hexagonally packed (HEX) cylinders but also promotes epitaxial order-order transitions from HEX cylinders to either face-centered orthorhombic or body-centered cubic spheres without modifying the volume fraction of both blocks. This general approach paves the way for the controlled self-assembly of other high-χ BCP systems.

Ion-Triggered Hydrogels Self-Assembled from Statistical Copolypeptides

Statistical copolypeptides comprising lysine and tyrosine with unprecedented ion-induced gelation behavior are reported. Copolypeptides are obtained by one-step N-carboxyanhydride (NCA) ring-opening polymerization. The gelation mechanism is studied by in situ SAXS analyses, in addition to optical spectroscopy and transmission electron microscopy (TEM). It is found that the gelation of these statistically polymerized polypeptides is due to the formation of stable intermolecular β-sheet secondary structures induced by the presence of salt ions as well as the aggregation of an α-helix between the copolypeptides. This behavior is unique to the statistical lysine/tyrosine copolypeptides and was not observed in any other amino acid combination or arrangement. Furthermore, the diffusion and mechanical properties of these hydrogels can be tuned through tailoring the polypeptide chain length and ion strength.

Layer-by-Layer Naphthalenediimide/Zn Phosphonate Hybrid Films Grown from Aqueous Solutions by a Simple Deposition Technique

Hybrid thin films containing N,N'-bis(2-phosphonoethyl)-1,4,5,8-naphthalenediimide (PNDI) and zinc cations (PNDI/Zn films) were built on silicon and indium tin oxide (ITO) substrates by a simple layer-by-layer deposition process. Silicon substrates primed with a layer of phosphonate groups were immersed alternately into zinc nitrate and PNDI aqueous solutions, yielding PNDI/Zn films containing up to 40 layers. ITO substrates, on the other hand, were used without priming, and the deposition sequence began with a PNDI layer. All film growth steps were conducted at room temperature, using aqueous solutions, thus assuring an environmentally clean process. The PNDI/Zn films were studied by X-ray reflectivity and grazing angle X-ray diffraction, using synchrotron radiation source. The films were constituted by crystallites, containing zinc phosphonate layers oriented nearly parallel to the substrate. PNDI/Zn films on ITO were reduced to stable free radicals, which were observed by UV-visible spectroscopy. Moreover, PNDI/Zn bulk materials with structural analogy with the films were produced.

Aggregation of Plate-like Colloids Induced by Charged Polymer Chains: Organization at the Nanometer Scale Tuned by Polymer Charge Density

We study the aggregation of charged plate-like colloids, Na-montmorillonite clays, in the presence of ionenes, oppositely charged polymer chains. The choice of the charged polymer allows tuning its linear charge density to match/mismatch the average charge separation on the clay surfaces. We assess the nanoscale structure of the aggregates formed by small-angle X-ray and neutron scattering. The nanoscale features of the formed clay aggregates are dominated by the presence of a stacking peak, giving clear evidence for the formation of clay tactoids, that is, a face-to-face aggregation geometry of the clay platelets. The chain charge density of ionenes influences not only the stacking repeat distance within the clay tactoids but also the extent of stacking and abundance of the tactoids. We may distinguish two regimes as a function of clay and ionene polymer charge densities (ρ_c and ρ_p, respectively). The first regime applies to ρ_p > ρ_c and ρ_p ≈ ρ_c, that is, for highly and "matching" charged chains. Under these conditions, the intercalated chains lie in a flat conformation within the tactoids, irrespective of the ionic strength (within the range studied, i.e., up to 0.05 M NaBr). For weakly charged chains, ρ_p < ρ_c, undulation of the ionene chains within the tactoid is seen. The degree of undulation increases with ionic strength due to the decreasing persistence length of the ionene chains. The extent of stacking (5-10 platelets per tactoid) is a general feature of all the systems, and its origin remains unknown. The system corresponding to the closest match in charge separations on the clay surface and on the polymer chain (ρ_p ≈ ρ_c) features the highest abundance of tactoids. This coincides with the highest macroscopic density as deduced from simple visual inspection of sediment volumes. This leads to the open question regarding the link between the density at the nanoscale and the macroscopic density and sedimentation behavior of the aggregate.

Nanoconfinement-Induced β-Phase Formation Inside Poly(vinylidene fluoride)-Based Block Copolymers

The electroactive properties of poly(vinylidene fluoride) (PVDF) are a direct consequence of its crystalline phases. Although poorly understood, nanostructuring PVDF in confined geometries can drastically change its crystallization behavior. Therefore, we synthesized a variety of PVDF-based triblock copolymers to gain a better understanding of the melt crystallization and explore how crystallization is affected by the morphology and chemical nature of the amorphous block. Differential scanning calorimetry, small-/wide-angle X-ray scattering, and transmission electron microscopy gave us excellent insights into the morphology and the corresponding crystalline phases. We find that crystallization of PVDF inside spherical nanodomains occurs via a homogeneous nucleation mechanism leading to a large undercooling and the formation of the thermodynamically favorable ferroelectric β-phase. On the contrary, when confined crystallization occurs inside a lamellar morphology, or in the case of breakout crystallization, a heterogeneous nucleation process leads to the formation of the nonferroelectric α-phase. Furthermore, favorable melt interactions between both blocks induce crystallization into the polar γ-phase at moderate cooling rates.

Selective molecular annealing: in situ small angle X-ray scattering study of microwave-assisted annealing of block copolymers

A new experimental set-up facilitating in situ SAXS during microwave annealing of polymers.

In situ Rheo-GISANS of triblock copolymers: gelation and shear effects on quasi-crystalline structures at interfaces

The behaviour of polymeric systems at surfaces and under flow is very important in many applications, from drug delivery to lubrication. Here, we have studied the thermotropic phases formed by a model tri-block copolymer using in situ Rheo-GISANS.

X-ray irradiation induced reduction and nanoclustering of lead in borosilicate glass

Under the influence of X-rays an unexpected formation of pure Pb nanoparticles was observed in PbS-doped borosilicate glass.

Thermally Responsive Elastomeric Supramolecular Polymers Featuring Flexible Aliphatic Hydrogen-Bonding End-Groups

The present paper details the synthesis, characterization, and preliminary physical analyses of a series of polyisobutylene derivatives featuring urethane and urea end-groups that enable supramolecular network formation to occur via hydrogen bonding. These polymers are readily accessible from relatively inexpensive and commercially available starting materials using a simple two-step synthetic approach. In the bulk, these supramolecular networks were found to possess thermoreversible and elastomeric characteristics as determined by temperature-dependent rheological analysis. These thermoreversible and elastomeric properties make these supramolecular materials potentially very useful in applications such as adhesives and healable surface coatings.