Direct detection of 16S rRNA in soil extracts by using oligonucleotide microarrays

We report on the development and validation of a simple microarray method for the direct detection of intact 16S rRNA from unpurified soil extracts. Total RNAs from Geobacter chapellei and Desulfovibrio desulfuricans were hybridized to an oligonucleotide array consisting of universal and species-specific 16S rRNA probes. PCR-amplified products from Geobacter and Desulfovibrio were easily and specifically detected under a range of hybridization times, temperatures, and buffers. However, reproducible, specific hybridization and detection of intact rRNA could be accomplished only by using a chaperone-detector probe strategy. With this knowledge, assay conditions were developed for rRNA detection using a 2-h hybridization time at room temperature. Hybridization specificity and signal intensity were enhanced using fragmented RNA. Formamide was required in the hybridization buffer in order to achieve species-specific detection of intact rRNA. With the chaperone detection strategy, we were able to specifically hybridize and detect G. chapellei 16S rRNA directly from a total-RNA soil extract, without further purification or removal of soluble soil constituents. The detection sensitivity for G. chapellei 16S rRNA in soil extracts was at least 0.5 microg of total RNA, representing approximately 7.5 x 10(6) Geobacter cell equivalents of RNA. These results suggest that it is now possible to apply microarray technology to the direct detection of microorganisms in environmental samples, without using PCR.

Effect of PCR template concentration on the composition and distribution of total community 16S rDNA clone libraries

Total DNA from sediment samples was isolated by a direct lysis technique. Purified DNA was used as template either undiluted or diluted 1:10 prior to polymerase chain reaction (PCR) amplification of 16S rRNA genes. Full-length inserts were analysed for restriction fragment length polymorphisms (RFLP) with the enzyme Cfo1, and the resulting distribution and abundance of RFLP patterns compared between the undiluted and diluted PCR reactions. Results indicate that for low PCR template concentrations, in the range from a few picograms to tens of picograms DNA, proportional representation of specific RFLP types was not reproducible upon template dilution, confirming that PCR amplification of 16S rDNA cannot be used directly to infer microbial abundance. In particular, only 15-24% of the RFLP types recovered from a sample were present in both the undiluted and diluted extracts. We propose that very low template concentrations in the PCR generate random fluctuations in priming efficiency, which led to the contrast in RFLP types observed in the libraries from the undiluted and diluted extracts.

Detecting and genotyping Escherichia coli O157:H7 using multiplexed PCR and nucleic acid microarrays

Rapid detection and characterization of food borne pathogens such as Escherichia coli O157:H7 is crucial for epidemiological investigations and food safety surveillance. As an alternative to conventional technologies, we examined the sensitivity and specificity of nucleic acid microarrays for detecting and genotyping E. coli O157:H7. The array was composed of oligonucleotide probes (25-30 mer) complementary to four virulence loci (intimin, Shiga-like toxins I and II, and hemolysin A). Target DNA was amplified from whole cells or from purified DNA via single or multiplexed polymerase chain reaction (PCR), and PCR products were hybridized to the array without further modification or purification. The array was 32-fold more sensitive than gel electrophoresis and capable of detecting amplification products from < 1 cell equivalent of genomic DNA (1 fg). Immunomagnetic capture, PCR and a microarray were subsequently used to detect 55 CFU ml(-1) (E. coli O157:H7) from chicken rinsate without the aid of pre-enrichment. Four isolates of E. coli O157:H7 and one isolate of O91:H2, for which genotypic data were available, were unambiguously genotyped with this array. Glass-based microarrays are relatively simple to construct and provide a rapid and sensitive means to detect multiplexed PCR products; the system is amenable to automation.

Towards a unified system for detecting waterborne pathogens

Currently, there is no single method to collect, process, and analyze a water sample for all pathogenic microorganisms of interest. Some of the difficulties in developing a universal method include the physical differences between the major pathogen groups (viruses, bacteria, protozoa), efficiently concentrating large volume water samples to detect low target concentrations of certain pathogen groups, removing co-concentrated inhibitors from the sample, and standardizing a culture-independent endpoint detection method. Integrating the disparate technologies into a single, universal, simple method and detection system would represent a significant advance in public health and microbiological water quality analysis. Recent advances in sample collection, on-line sample processing and purification, and DNA microarray technologies may form the basis of a universal method to detect known and emerging waterborne pathogens. This review discusses some of the challenges in developing a universal pathogen detection method, current technology that may be employed to overcome these challenges, and the remaining needs for developing an integrated pathogen detection and monitoring system for source or finished water.

Application of the 5' fluorogenic exonuclease assay (TaqMan) for quantitative ribosomal DNA and rRNA analysis in sediments

In this study, we report on the development of quantitative PCR and reverse transcriptase PCR assays for the 16S rRNA of Geobacter spp. and identify key issues related to fluorogenic reporter systems for nucleic acid analyses of sediments. The lower detection limit of each assay was 5 to 50 fg of genomic DNA or < or =2 pg of 16S rRNA. TaqMan PCR spectral traces from uncontaminated, amended aquifer sediments were significantly lower (P < 0.0002) than traces for the external standard curve. We also observed a similar, significant decrease in mean quencher emissions for undiluted extracts relative to those for diluted extracts (P < 0.0001). If PCR enumerations were based solely upon the undiluted sample eluant, the TaqMan assay generated an inaccurate result even though the threshold cycle (C(t)) measurements were precise and reproducible in the sediment extracts. Assay accuracy was significantly improved by employing a system of replicate dilutions and replicate analyses for both DNA and rRNA quantitation. Our results clearly demonstrate that fluorescence quenching and autofluorescence can significantly affect TaqMan PCR enumeration accuracy, with subsequent implications for the design and implementation of TaqMan PCR to sediments and related environmental samples.

Taxonomic study of aromatic-degrading bacteria from deep-terrestrial-subsurface sediments and description of Sphingomonas aromaticivorans sp. nov., Sphingomonas subterranea sp. nov., and Sphingomonas stygia sp. nov

Phylogenetic analyses of 16S rRNA gene sequences by distance matrix and parsimony methods indicated that six strains of bacteria isolated from deep saturated Atlantic coastal plain sediments were closely related to the genus Sphingomonas. Five of the strains clustered with, but were distinct from, Sphingomonas capsulata, whereas the sixth strain was most closely related to Blastobacter natatorius. The five strains that clustered with S. capsulata, all of which could degrade aromatic compounds, were gram-negative, non-spore-forming, non-motile, rod-shaped organisms that produced small, yellow colonies on complex media. Their G + C contents ranged from 60.0 to 65.4 mol%, and the predominant isoprenoid quinone was ubiquinone Q-10. All of the strains were aerobic and catalase positive. Indole, urease, and arginine dihydrolase were not produced. Gelatin was not liquified, and glucose was not fermented. Sphingolipids were present in all strains; 2OH14:0 was the major hydroxy fatty acid, and 18:1 was a major constituent of cellular lipids. Acid was produced oxidatively from pentoses, hexoses, and disaccharides, but not from polyalcohols and indole. All of these characteristics indicate that the five aromatic-degrading strains should be placed in the genus Sphingomonas as currently defined. Phylogenetic analysis of 16S rRNA gene sequences, DNA-DNA reassociation values, BOX-PCR genomic fingerprinting, differences in cellular lipid composition, and differences in physiological traits all indicated that the five strains represent three previously undescribed Sphingomonas species. Therefore, we propose the following new species: Sphingomonas aromaticivorans (type strain, SMCC F199), Sphingomonas subterranea (type strain, SMCC B0478), and Sphingomonas stygia (type strain, SMCC B0712).

Reverse transcriptase (RT) inhibition of PCR at low concentrations of template and its implications for quantitative RT-PCR

Numerous instances of reverse transcriptase (RT) inhibition of the PCR were observed while developing nonquantitative uncoupled RT-PCR techniques for detecting nitrogenase and ammonia monooxygenase gene expression in situ. The inhibitory effect of RT on the PCR was removed with increasing template concentrations beyond 10(5) to 10(6) copies. Including T4 gene 32 protein during the reverse transcription phase of the RT-PCR reaction increased the RT-PCR product yield by as much as 483%; if gene 32 protein was introduced after reverse transcription but prior to the PCR phase, no improvement in product yield was observed. Addition of 1 microgram of exogenous calf thymus DNA or yeast tRNA did little to relieve RT inhibition of the PCR on both genomic DNA and mRNA templates. These results suggest that RT inhibition of the PCR is mediated through direct interaction with the specific primer-template combination (DNA and RNA) and point to specific assay modifications for estimating the extent of RT inhibition and counteracting some of the inhibitory effect. Furthermore, the working hypothesis of RT inhibition below a 10(5) to 10(6) copy threshold has important implications for quantitative RT-PCR studies. In particular, competitive, quantitative RT-PCR systems will consistently underestimate the actual RNA concentration. Hence, enumerations of RNA templates below 10(5) to 10(6) copies will be relative to an internal standard and will not be an absolute measure of RNA abundance in situ.

Sequence versus structure for the direct detection of 16S rRNA on planar oligonucleotide microarrays

A two-probe proximal chaperone detection system consisting of a species-specific capture probe for the microarray and a labeled, proximal chaperone probe for detection was recently described for direct detection of intact rRNAs from environmental samples on oligonucleotide arrays. In this study, we investigated the physical spacing and nucleotide mismatch tolerance between capture and proximal chaperone detector probes that are required to achieve species-specific 16S rRNA detection for the dissimilatory metal and sulfate reducer 16S rRNAs. Microarray specificity was deduced by analyzing signal intensities across replicate microarrays with a statistical analysis-of-variance model that accommodates well-to-well and slide-to-slide variations in microarray signal intensity. Chaperone detector probes located in immediate proximity to the capture probe resulted in detectable, nonspecific binding of nontarget rRNA, presumably due to base-stacking effects. Species-specific rRNA detection was achieved by using a 22-nt capture probe and a 15-nt detector probe separated by 10 to 14 nt along the primary sequence. Chaperone detector probes with up to three mismatched nucleotides still resulted in species-specific capture of 16S rRNAs. There was no obvious relationship between position or number of mismatches and within- or between-genus hybridization specificity. From these results, we conclude that relieving secondary structure is of principal concern for the successful capture and detection of 16S rRNAs on planar surfaces but that the sequence of the capture probe is more important than relieving secondary structure for achieving specific hybridization.

Fabrication of DNA microarrays using unmodified oligonucleotide probes

Microarrays printed on glass slides are often constructed by covalently linking oligonucleotide probes to a derivatized surface. These procedures typically require relatively expensive amine- or thiol-modified oligonucleotide probes that add considerable expense to larger arrays. We describe a system by which unmodified oligonucleotide probes are bound to either nonderivatized or epoxy-silane-derivatized glass slides. Biotinylated PCR products are heat denatured, hybridized to the arrays, and detected using an enzymatic amplification system. Unmodified probes appear to detach from the slide surface at high pH (> 10.0), suggesting that hydrogen bonding plays a significant role in probe attachment. Regardless of surface preparation, high temperature (up to 65 degrees C) and low ionic strength (deionized water) do not disturb probe attachment; hence, the fabrication method described here is suitable for a wide range of hybridization stringencies and conditions. We illustrate kinetics of room temperature hybridizations for probes attached to nonderivatized slides, and we demonstrate that unmodified probes produce hybridization signals equal to amine-modified, covalently bound probes. Our method provides a cost-effective alternative to conventional attachment strategies that is particularly suitable for genotyping PCR products with nucleic acid microarrays.

Automated immunomagnetic separation and microarray detection of E. coli O157:H7 from poultry carcass rinse

We describe the development and application of an electromagnetic flow cell and fluidics system for automated immunomagnetic separation (IMS) of Escherichia coli O157:H7 directly from poultry carcass rinse. We further describe the biochemical coupling of automated sample preparation with nucleic acid microarrays. Both the cell concentration system and microarray detection method did not require cell growth or enrichment from the poultry carcass rinse prior to IMS. Highly porous Ni foam was used to enhance the magnetic field gradient within the flow path, providing a mechanism for immobilizing immunomagnetic particles throughout the fluid rather than the tubing wall. A maximum of 32% recovery efficiency of non-pathogenic E. coli was achieved within the automated system with 6 s cell contact times using commercially available antibodies targeted against the O and K antigens. A 15-min protocol (from sample injection though elution) provided a cell recovery efficiency that was statistically similar to > I h batch captures. O157:H7 cells were reproducibly isolated directly from poultry carcass rinse with 39% recovery efficiency at 10(3) CFU ml(-1) inoculum. Direct plating of washed beads showed positive recovery of O157:H7 directly from poultry carcass rinse at an inoculum of 10 CFU ml(-1). Recovered beads were used for direct polymerase chain reaction (PCR) amplification and microarray detection, with a process-level detection limit (automated cell concentration though microarray detection) of < 10(3)CFU ml(-1) in poultry carcass rinse.

Genotyping Cryptosporidium parvum with an hsp70 single-nucleotide polymorphism microarray

We investigated the application of an oligonucleotide microarray to (i) specifically detect Cryptosporidium spp., (ii) differentiate between closely related C. parvum isolates and Cryptosporidium species, and (iii) differentiate between principle genotypes known to infect humans. A microarray of 68 capture probes targeting seven single-nucleotide polymorphisms (SNPs) within a 190-bp region of the hsp70 gene of Cryptosporidium parvum was constructed. Labeled hsp70 targets were generated by PCR with biotin- or Cy3-labeled primers. Hybridization conditions were optimized for hybridization time, temperature, and salt concentration. Two genotype I C. parvum isolates (TU502 and UG502), two C. parvum genotype II isolates (Iowa and GCH1), and DNAs from 22 non-Cryptosporidium sp. organisms were used to test method specificity. Only DNAs from C. parvum isolates produced labeled amplicons that could be hybridized to and detected on the array. Hybridization patterns between genotypes were visually distinct, but identification of SNPs required statistical analysis of the signal intensity data. The results indicated that correct mismatch discrimination could be achieved for all seven SNPs for the UG502 isolate, five of seven SNPs for the TU502 isolate, and six of seven SNPs for both the Iowa and GCH1 isolates. Even without perfect mismatch discrimination, the microarray method unambiguously distinguished between genotype I and genotype II isolates and demonstrated the potential to differentiate between other isolates and species on a single microarray. This method may provide a powerful new tool for water utilities and public health officials for assessing point and nonpoint source contamination of water supplies.

Suspension array analysis of 16S rRNA from Fe- and SO(4)2- reducing bacteria in uranium-contaminated sediments undergoing bioremediation

A 16S rRNA-targeted tunable bead array was developed and used in a retrospective analysis of metal- and sulfate-reducing bacteria in contaminated subsurface sediments undergoing in situ U(VI) bioremediation. Total RNA was extracted from subsurface sediments and interrogated directly, without a PCR step. Bead array validation studies with total RNA derived from 24 isolates indicated that the behavior and response of the 16S rRNA-targeted oligonucleotide probes could not be predicted based on the primary nucleic acid sequence. Likewise, signal intensity (absolute or normalized) could not be used to assess the abundance of one organism (or rRNA) relative to the abundance of another organism (or rRNA). Nevertheless, the microbial community structure and dynamics through time and space and as measured by the rRNA-targeted bead array were consistent with previous data acquired at the site, where indigenous sulfate- and iron-reducing bacteria and near neighbors of Desulfotomaculum were the organisms that were most responsive to a change in injected acetate concentrations. Bead array data were best interpreted by analyzing the relative changes in the probe responses for spatially and temporally related samples and by considering only the response of one probe to itself in relation to a background (reference) environmental sample. By limiting the interpretation of the data in this manner and placing it in the context of supporting geochemical and microbiological analyses, we concluded that ecologically relevant and meaningful information can be derived from direct microarray analysis of rRNA in uncharacterized environmental samples, even with the current analytical uncertainty surrounding the behavior of individual probes on tunable bead arrays.

Continuous spore disruption using radially focused, high-frequency ultrasound

We report on the development of a novel, continuous-flow, radially focused ultrasonic disruptor capable of lysing Bacillus spores in the absence of added chemical denaturants, enzymes, or microparticles. Greater than 99% disruption was achieved for Bacillus globigii spores and Escherichia coli and Bacillus subtilis vegetative cells with sample residence times of 62, 12, and 12 s, respectively. Microscopic and SEM images indicated that at equivalent power levels, the incidence of cell death or loss of viability typically exceeded the efficiency of (visible) cell lysis. However, semiquantitative PCR showed up to a 1,000-fold increase in intracellular DNA availability from ultrasonically disrupted spores, and liberated DNA was intact and available for subsequent detection.

Fingerprinting closely related xanthomonas pathovars with random nonamer oligonucleotide microarrays

Current bacterial DNA-typing methods are typically based on gel-based fingerprinting methods. As such, they access a limited complement of genetic information and many independent restriction enzymes or probes are required to achieve statistical rigor and confidence in the resulting pattern of DNA fragments. Furthermore, statistical comparison of gel-based fingerprints is complex and nonstandardized. To overcome these limitations of gel-based microbial DNA fingerprinting, we developed a prototype, 47-probe microarray consisting of randomly selected nonamer oligonucleotides. Custom image analysis algorithms and statistical tools were developed to automatically extract fingerprint profiles from microarray images. The prototype array and new image analysis algorithms were used to analyze 14 closely related Xanthomonas pathovars. Of the 47 probes on the prototype array, 10 had diagnostic value (based on a chi-squared test) and were used to construct statistically robust microarray fingerprints. Analysis of the microarray fingerprints showed clear differences between the 14 test organisms, including the separation of X. oryzae strains 43836 and 49072, which could not be resolved by traditional gel electrophoresis of REP-PCR amplification products. The proof-of-application study described here represents an important first step to high-resolution bacterial DNA fingerprinting with microarrays. The universal nature of the nonamer fingerprinting microarray and data analysis methods developed here also forms a basis for method standardization and application to the forensic identification of other closely related bacteria.

Automated purification and suspension array detection of 16S rRNA from soil and sediment extracts by using tunable surface microparticles

Autonomous, field-deployable molecular detection systems require seamless integration of complex biochemical solutions and physical or mechanical processing steps. In an attempt to simplify the fluidic requirements for integrated biodetection systems, we used tunable surface microparticles both as an rRNA affinity purification resin in a renewable microcolumn sample preparation system and as the sensor surface in a flow cytometer detector. The tunable surface detection limits in both low- and high-salt buffers were 1 ng of total RNA ( approximately 10(4) cell equivalents) in 15-min test tube hybridizations and 10 ng of total RNA ( approximately 10(5) cell equivalents) in hybridizations with the automated system (30-s contact time). RNA fragmentation was essential for achieving tunable surface suspension array specificity. Chaperone probes reduced but did not completely eliminate cross-hybridization, even with probes sharing <50% identity to target sequences. Nonpurified environmental extracts did not irreparably affect our ability to classify color-coded microparticles, but residual environmental constituents significantly quenched the Alexa-532 reporter fluor. Modulating surface charge did not influence the interaction of soluble environmental contaminants with conjugated beads. The automated system greatly reduced the effects of fluorescence quenching, especially in the soil background. The automated system was as efficacious as manual methods for simultaneous sample purification, hybridization, and washing prior to flow cytometry detection. The implications of unexpected target cross-hybridization and fluorescence quenching are discussed relative to the design and implementation of an integrated microbial monitoring system.

Affinity purification of DNA and RNA from environmental samples with peptide nucleic acid clamps

Bispeptide nucleic acids (bis-PNAs; PNA clamps), PNA oligomers, and DNA oligonucleotides were evaluated as affinity purification reagents for subfemtomolar 16S ribosomal DNA (rDNA) and rRNA targets in soil, sediment, and industrial air filter nucleic acid extracts. Under low-salt hybridization conditions (10 mM NaPO(4), 5 mM disodium EDTA, and 0.025% sodium dodecyl sulfate [SDS]) a PNA clamp recovered significantly more target DNA than either PNA or DNA oligomers. The efficacy of PNA clamps and oligomers was generally enhanced in the presence of excess nontarget DNA and in a low-salt extraction-hybridization buffer. Under high-salt conditions (200 mM NaPO(4), 100 mM disodium EDTA, and 0.5% SDS), however, capture efficiencies with the DNA oligomer were significantly greater than with the PNA clamp and PNA oligomer. Recovery and detection efficiencies for target DNA concentrations of > or =100 pg were generally >20% but depended upon the specific probe, solution background, and salt condition. The DNA probe had a lower absolute detection limit of 100 fg of target (830 zM [1 zM = 10(-21) M]) in high-salt buffer. In the absence of exogenous DNA (e.g., soil background), neither the bis-PNA nor the PNA oligomer achieved the same absolute detection limit even under a more favorable low-salt hybridization condition. In the presence of a soil background, however, both PNA probes provided more sensitive absolute purification and detection (830 zM) than the DNA oligomer. In varied environmental samples, the rank order for capture probe performance in high-salt buffer was DNA > PNA > clamp. Recovery of 16S rRNA from environmental samples mirrored quantitative results for DNA target recovery, with the DNA oligomer generating more positive results than either the bis-PNA or PNA oligomer, but PNA probes provided a greater incidence of detection from environmental samples that also contained a higher concentration of nontarget DNA and RNA. Significant interactions between probe type and environmental sample indicate that the most efficacious capture system depends upon the particular sample type (and background nucleic acid concentration), target (DNA or RNA), and detection objective.

Estimating biodegradative gene numbers at a JP-5 contaminated site using PCR

We have utilized a most-probable-number polymerase chain reaction (MPN-PCR) procedure to estimate gene numbers and biodegradative potential at a jet fuel (JP-5) contaminated site undergoing the first phase of bioremediation. Nucleic acid analysis was used to determine whether a lack of genetic potential for bioremediation was responsible for low levels of oxygen utilization at the site. Total community DNA was extracted and analyzed by PCR for genes (nahAc,alkB, and xylE) known to be involved in the degradation of certain JP-5 constituents. Results indicate that significant aromatic biodegradative potential exists at the site and outlying areas not subjected to engineered remediation, suggesting that physical and/or chemical factors are inhibiting oxygen delivery. xylE and nahAc were often present in significant portions of the microbial community, whereas alkB was rarely detected. This study illustrates the utility of molecular techniques in evaluating biodegradative potential in the field during active bioremediation.

Analysis of protein interaction and function with a 3-dimensional MALDI-MS protein array

Protein profiling and characterization of protein interactions in biological samples ultimately require indicator-free methods of signal detection, which likewise offer an opportunity to distinguish specific interactions from nonspecific protein binding. Here we describe a new 3-dimensional protein microchip for detecting biomolecular interactions with matrix-assisted laser desorption-ionization mass spectrometry (MALDI-MS); the microchip comprises a high-density array of methacrylate polymer elements containing immobilized proteins as capture molecules and directly interfaces with a commercially available mass spectrometer. We demonstrated the performance of the chip in three types of experiments by detecting antibody-antigen interactions, enzymatic activity, and enzyme-inhibitor interactions. MALDI-MS biochip-based tumor necrosisfactor alpha (TNF-alpha) immunoassays demonstrated the feasibility of detecting antigens in complex biological samples by identifying molecular masses of bound proteins even at high nonspecific protein binding. By detecting model interactions of trypsin with trypsin inhibitors, we showed that the protein binding capacity of methacrylate polymer elements and the sensitivity of MALDI-MS detection of proteins bound to these elements surpassed that of other 2- and 3-dimensional substrates tested Immobilized trypsin retained functional (enzymatic) activity within the protein microchip and the specificity of macromolecular interactions even in complex biological samples. We believe that the underlying technology should therefore be extensible to whole-proteome protein expression profiling and interaction mapping.

Rotating rod renewable microcolumns for automated, solid-phase DNA hybridization studies

The development of a new temperature-controlled renewable microcolumn flow cell for solid-phase nucleic acid hybridization in an automated sequential injection system is described. The flow cell included a stepper motor-driven rotating rod with the working end cut to a 45 degrees angle. In one position, the end of the rod prevented passage of microbeads while allowing fluid flow; rotation of the rod by 180 degrees releases the beads. This system was used to rapidly test many hybridization and elution protocols to examine the temperature and solution conditions required for sequence-specific nucleic acid hybridization. Target nucleic acids labeled with a near-infrared fluorescent dye were detected immediately postcolumn during all column perfusion and elution steps using a flow-through fluorescence detector. Temperature control of the column and the presence of Triton X-100 surfactant were critical for specific hybridization. Perfusion of the column with complementary oligonucleotide (200 microL, 10 nM) resulted in hybridization with 8% of the DNA binding sites on the microbeads with a solution residence time of less than 1 s and a total sample perfusion time of 40 s. The use of the renewable column system for detection of an unlabeled PCR product in a sandwich assay was also demonstrated.

Automated nucleic acid isolation and purification from soil extracts using renewable affinity microcolumns in a sequential injection system

We have combined affinity purification concepts with novel renewable-surface microcolumns in a sequential injection system for the automated and rapid isolation and purification of nucleic acids directly from crude soil extracts. Geobacter chapellii DNA was spiked at femtomolar concentrations into clean solutions or crude soil extracts containing picomolar concentrations of competitive DNA, humic acids and other soluble soil constituents. The 16S rDNA targets (indigenous and spiked) were purified and eluted in less than 20 min in a form suitable for direct polymerase chain reaction (PCR) amplification and detection. The extraction efficiency of the automated system was equivalent to a 4-h batch reaction using identical reagents. The estimated efficiency of isolation and purification was maximally 30% under the conditions employed here, with levels comparable to those obtained with soils/sediments processed by standard techniques, and a detection limit of 1.7 attamoles (10(6) copies) Geobacter target in a soil extract containing a competitive background of 10(9) genomes. This manuscript represents the first report of automated nucleic acid purification from an environmental sample using sequential injection fluidic systems and renewable microcolumn technology, and provides an excellent platform from which to optimize and accelerate the development of an integrated microbial/nucleic acid detector.