Bang! Month-scale eruption triggering at Santorini volcano

The time lag between intrusion of fresh, hot magma and an ensuing eruption is of critical importance in both understanding the triggering and mitigating the consequences of volcanic eruptions. This work looks at material erupted during 1925-28 at the Nea Kameni volcanic center in Santorini, Greece, to determine this time scale. By exploiting Fe-Mg diffusion in olivine crystals, we constrained the intrusion-to-eruption time lag to between 3 and 10 weeks. These techniques have potential application at many volcanic centers; previously erupted material can be used to calibrate records of the short-time scale processes common to many volcanic centers.

A circadian rhythm in the locomotive behaviour of the giant garden slug Limax maximus

The locomotor activity of the garden slug Limax maximus was examined for components of circadian rhythmicity. Behavioural (running wheel) studies clearly demonstrated that the activity satisfies the principal criteria of circadian rhythmicity. In constant darkness at a constant temperature, the locomotor activity freeran with a period of about 24 h (range 23-6-24-6 h). The rhythm was also expressed in constant light with a period for individual slugs that tended to be shorter in LL than in DD. The period of the rhythm was temperature compensated (11–5-21-5 degrees C) with a Q10 approximately equal to 1–00. The locomotor rhythm could be entrained to 24 h LD cycles such that the circadian activity peak occurred during the dark. The phase angle between the onset of activity and lights-off was not fixed, but was a function of the photoperiod of the entraining light cycle.

Cobalt iontophoresis techniques for tracing afferent and efferent connections in the vertebrate CNS

In recent years several dye and cobalt iontophoresis techniques have been successfully used by invertebrate neurophysiologists for the localization of neuron somata and their processes. The cobalt iontophoresis technique has now been extended for use in the tracing of nerve fiber pathways and the localization of neuron somata in vertebrates. The brain and spinal cord of an animal are removed following perfusion with saline, and placed in a dish of cold saline. A suction electrode, filled with 300 mM cobalt chloride, is then placed over the cut end of the nerve trunk. Cobalt ions are then iontophoresed (by means of a voltage divider) within the nerve fibers, along their course. Following iontophoresis, the brain is bathed in an ammonium sulfide solution to precipitate the cobalt as black cobalt sulfide. The brain is then processed for histological procedures. A wide variety of vertebrates has been used, including amphibians, reptiles, aves and mammals, with uniform success. The cobalt iontophoresis technique presently in use has a wide range of applicability for neuroanatomical studies.

First combined electron backscatter diffraction and transmission electron microscopy study of grain boundary structure of deformed quartzite

The structures of boundaries in a deformed and dynamically recovered and recrystallized quartz polycrystal (mylonite) were characterized by transmission electron microscopy, after the misorientation angles across the same grain boundaries had been analysed using electron backscatter diffraction in a scanning electron microscope. In this new approach, a specific sample area is mapped with electron backscatter diffraction, and the mapped area is then attached to a foil, and by the ion beam thinned for transmission electron microscopy analysis. Dislocations in grain boundaries were recognized as periodic and parallel fringes. The fringes associated with dislocations are observed in boundaries with misorientations less than 9 degrees , whereas such fringes cannot be seen in the boundaries with misorientations larger than 17 degrees . Some boundaries with misorientations between 9 degrees and 17 degrees generally have no structures associated with dislocation. One segment of a boundary with a misorientation of 13.5 degrees has structures associated with dislocations. It is likely that the transition from low-angle to high-angle boundaries occurs at misorientations ranging from approximately 9 degrees to 14 degrees . Change in the grain boundary structure presumably influences the mobility of the boundaries. In the studied deformed quartz vein, a relative dearth of boundaries between misorientation angles of theta = 2 degrees and theta = 15 degrees has previously been reported, and high-angle boundaries form cusps where they intersect low-angle boundaries, suggesting substantial mobility of high-angle boundaries.

Comparison of the microstructure and phase stability of as-cast, CAD/CAM and powder metallurgy manufactured Co-Cr dental alloys

OBJECTIVE

The objective of this study was to identify the different microstructures produced by CC, PM and as-cast techniques for Co-Cr alloys and their phase stability following porcelain firings.

METHODS

Three bi-layer porcelain veneered Co-Cr specimens and one monolithic Co-Cr specimen of each alloy group [cast, powder metallurgy (PM), CAD/CAM (CC)] were manufactured and analyzed using electron backscatter diffraction (EBSD), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD). Specimens were treated to incremental numbers of porcelain firings (control 0, 5, 15) with crystallographic data, grain size and chemical composition subsequently obtained and analyzed.

RESULTS

EBSD datasets of the cast alloy indicated large grains >200 μm whereas PM and CC alloy consisted of mean arithmetic grain sizes of 29.6 μm and 19.2 μm respectively. XRD and EBSD results both indicated the highest increase in hcp content (>13vol%) for cast Co-Cr alloy after treatment with porcelain firing while PM and CC indicated <2vol% hcp content. A fine grain interfacial layer developed on all surfaces of the alloy after porcelain firing. The depth of this layer increased with porcelain firings for as-cast and PM but no significant increase (p>.05) was observed in CC. EDS line scans indicated an increase in Cr content at the alloy surface after porcelain firing treatment for all three alloys.

SIGNIFICANCE

PM and CC produced alloy had superior fcc phase stability after porcelain firings compared to a traditional cast alloy. It is recommended that PM and CC alloys be used for porcelain-fused-to-metal restorations.

The use of combined cathodoluminescence and EBSD analysis: a case study investigating grain boundary migration mechanisms in quartz

Grain boundary migration is an important mechanism of microstructural modification both in rocks and in metals. Combining detailed cathodoluminescence (CL) and electron backscatter diffraction (EBSD) analysis offers the opportunity to relate directly changes in crystallographic orientation to migrating boundaries. We observe the following features in naturally heated quartz grains from the thermal aureole of the Ballachulish Igneous Complex (Scotland, U.K.): (a) propagation of substructures and twin boundaries in swept areas both parallel and at an angle to the growth direction, (b) development of slightly different crystallographic orientations and new twin boundaries at both the growth interfaces and within the swept area and (c) a gradual change in crystallographic orientation in the direction of growth. All these features are compatible with a growth mechanism in which single atoms are attached and detached both at random and at preferential sites, i.e. crystallographically controlled sites or kinks in boundary ledges. Additionally, strain fields caused by defects and/or trace element incorporation may facilitate nucleation sites for new crystallographic orientations at distinct growth interfaces but also at continuously migrating boundaries. This study illustrates the usefulness of combined CL and EBSD in microprocess analysis. Further work in this direction may provide detailed insight into both the mechanism of static grain growth and the energies and mobilities of boundaries in terms of misorientation and grain boundary plane orientation.

The integration of experimental in-situ EBSD observations and numerical simulations: a novel technique of microstructural process analysis

The combination of subgrain- and grain-scale microstructural data collected during in-situ heating experiments and numerical simulations of equivalent microstructural development offers an innovative and powerful tool in the advancement of the understanding of microstructural processes. We present a system that fully integrates subgrain- to grain-scale crystallographic data obtained during in-situ observations during heating experiments in a scanning electron microscope and the two-dimensional hybrid numerical modelling system Elle. Such a system offers the unique opportunity to test and verify theories for microstructural development, as predictions made by numerical simulations can be directly coupled to appropriate physical experiments and, conversely, theoretical explanations of experimental observations should be testable with numerical simulations. Discrepancies between data obtained with both techniques suggest the need for an in-depth investigation and thus open up new avenues of theory development, modification and verification. In addition, because in numerical models it is possible to select the processes modelled, the effect of individual processes on the microstructural development of a specific material can be quantified. To illustrate the potential and methodology of the so-called EBSD2Elle system, two in-situ experiments and their equivalent numerical experiments are presented. These are static heating experiments of (a) an annealed Ni-foil coupled with a front tracking model for grain growth and (b) a cold deformed rock salt with kinetic Monte Carlo simulations for subgrain growth.

Analysis of contact-rehydration in terrestrial gastropods: osmotic control of drinking behaviour

Contact-rehydration in slugs is mediated by a specific behavioural pattern in which dehydrated slugs move onto a moist surface, assume a flattened posture while water is absorbed through the surface of the foot and move off once they are rehydrated. ‘Drinking behaviour’ is initiated when slugs have been dehydrated to the threshold level of 60–70% of initial body weight (IBW). Drinking behaviour is terminated once slugs have rehydrated to their individual rehydration set-points. The mean ‘rehydration set-point’ for Limax is 93.6 +/− 12.2% IBW (+/− S.D.). Slugs can achieve their individual set-point regardless of the extent of initial dehydration. Drinking behaviour can be initiated by injections of hyperosmotic mannitol solution and terminated by injections of dilute saline. This indicates that variation in the osmolality of the haemolymph is involved in the control of the behavioural sequence.

Analysis of contact-rehydration in terrestrial gastropods: absorption of 14C-inulin through the epithelium of the foot

Contact-rehydration in terrestrial slugs involves a specific drinking behaviour during which water is rapidly absorbed through the integument of the foot. When dehydrated slugs were placed on wet filter paper containing 14C-inulin, they displayed the characteristic drinking posture and absorbed both water and 14C-inulin. Samples of haemolymph from dehydrated slugs after 12 min of contact-rehydration contained about 6 micrograms of 14C-inulin 100 mg-1 of haemolymph (0.24 mmol l-1 14C-inulin in the substrate). The haemolymph of hydrated slugs however contained no detectable radioactivity after 12 min on the filter paper. Electron microscopy revealed that the intercellular spaces between the epithelial cells of the foot were reduced in dehydrated slugs, but were rapidly enlarged during contact-rehydration. It is concluded that contact-rehydration in terrestrial slugs is mediated by bulk flow of water through an epithelial paracellular pathway in the integument of the foot.

Electrophysiological Analysis of Peripheral Neurones and Their Possible Role in the Local Reflexes of a Mollusc

1. It has been shown by behavioural and electromyographic studies that local reflexes exist in the siphon wall musculature of Spisula. In contrast, the responsiveness of the siphon retractor muscles is centrally mediated.

2. Clusters of neurone somata occur at the peripheral branching points of the siphonal nerves. Intracellular records obtained from these peripheral cluster cells indicate they are efferents to the siphon wall musculature. These cells receive synaptic input from a population of touch-sensitive afferents from the siphons and mantle. None of the peripheral cells from which records have been obtained provided any indication of being sensory in function.

3. ‘Central delay’ measurements indicate the presence of only one synaptic transfer between the afferent input to a peripheral nerve junction and the output of cluster cells.

4. The synaptic input to the cluster cells is shown to be subject to short-term modification (antifacilitation). This coupled with the direct evidence that the peripheral cells are functional neurones supports the possibility that molluscan peripheral neurones could mediate habituated responses.

Problems in determining the misorientation axes, for small angular misorientations, using electron backscatter diffraction in the SEM

The errors associated with calculating misorientation axes from electron backscatter diffraction (EBSD) data have been assessed experimentally. EBSD measurements were made on the same grains after imposed rotations of 2 degrees, 5 degrees, 7 degrees, 10 degrees, 12 degrees, 17 degrees, 27 degrees and 180 degrees around the normal to the specimen surface. The misorientation magnitudes and the misorientation axes associated with the imposed rotations have been calculated from the EBSD data. Individual measurements of misorientation axes are precise for misorientation magnitudes greater than approximately 20 degrees. The errors must be appreciated when assessing misorientation data at lower misorientation magnitudes and particularly at magnitudes less than 5 degrees. Where misorientation axes can be characterized by the distribution of axes from a number of individual measurements, current EBSD techniques are satisfactory, for data sets of 30 measurements, as long as misorientation magnitudes are 10 degrees or more. With larger data sets it may be possible to extend this approach to smaller misorientation magnitudes. For characterization of individual misorientations less than 5 degrees, new EBSD techniques need to be developed.

The molluscan neuropeptide, SCPB, increases the responsiveness of the feeding motor program of Limax maximus

Small cardioactive peptide B (SCPB) has an excitatory effect on both buccal neurons and musculature in numerous molluscan species. The present study reports the effects of SCPB on the activity of specified buccal neurons and the expression of the feeding motor program of the terrestrial slug, Limax maximus. Superfusion of an isolated CNS preparation with 10(-6)M SCPB results in a 3-4-fold increase in the burst frequency of the fast salivary burster neuron (FSB), while having no effect on the activity of another endogenous burster, the bilateral salivary neuron (BSN). The response of the FSB to SCPB is dose dependent, with a threshold concentration of 2 X 10(-8)M. The response of the FSB to SCPB showed no indication of desensitization, even after long-term exposure (20 min). The feeding motor program (FMP) in Limax is a discrete pattern of cyclical motor activity that can be initiated by lip nerve stimulation. In the presence of SCPB a previously subthreshold stimulus can initiate the full FMP. The pattern of the FMP, once initiated, appears unaffected by SCPB. Thus it is the responsiveness of the initiation process that is enhanced by SCPB. Histochemical studies revealed a number of buccal neuron somata and fibers that stain for SCPB-like immunoreactive material (SLIM).

Is titanium-zirconium alloy a better alternative to pure titanium for oral implant? Composition, mechanical properties, and microstructure analysis

Introduction

Titanium (Ti) is widely accepted as a biomaterial for orthopaedic and dental implants, primarily due to its capacity to integrate directly into the bone and its superior corrosion resistance. It has been suggested that titanium–zirconium alloy (TiZr), with 13–17% of zirconium, has better mechanical properties than pure Ti, but there are very few published studies assessing the suitability of TiZr for high-load- bearing implants. This study aimed to compare the mechanical properties and microstructures of TiZr and commercially pure titanium (Ti).

Methodology

Pure Ti and TiZr alloy discs were prepared and subjected to characterisation by nanoindentation, electron dispersive spectroscopy (EDS), X-ray diffraction (XRD), and electron backscatter diffraction (EBSD).

Results

The TiZr alloy was found to have significantly lower elastic modulus value (p < 0.0001) and greater hardness than Ti (p < 0.05). The EDS results confirmed the presence of Zr (13–17%) in the TiZr alloy, with XRD and EBSD images showing microstructure with the alpha phase similar to commercially available Ti.

Conclusion

The lower elastic modulus, higher hardness, presence of alpha phase, and the finer grain size of the TiZr alloy make it more suitable for high-load-bearing implants compared to commercially available Ti and is likely to encourage a positive biological response.

Behavioural and physiological aspects of swimming in cercariae of the digenetic trematode, Proterometra macrostoma

1. Cyclical swimming behaviour of the cercariae of the digenetic trematode, Proterometra macrostoma, involves a highly regular alternating swim-sink sequence. During periods of swimming the cercariae are propelled upward through the water by alternating lateral contractions of the tail. Following each burst of swimming the cercariae passively drift downward. 2. Suction electrode recordings from the tail during swimming reveal that a single biphasic potential precedes each contraction in a burst. 3. The site of initiation of the rhythmic activity is the transverse band at the junction of the furcae and body of the tail. Sensory feedback does not play a major role in maintenance of the rhythm. 4. A burst of swimming can be initiated by tactile stimulation of the tail. At no time is a cercaria refractory to tactile stimulation. 5. The tail of P. macrostoma cercariae is an autonomous locomotor organ specialized for the brief free-living period between emergence from the snail host and infestation of the primary host.

A Neural Correlate of Behavioural Stimulus Intensity Discrimination in a Mollusc

1. A behavioural sequence of Spisula is described that involves local reflexes, siphon retraction and valve adduction. The response to low-intensity tactile stimulation is locally mediated reflex activity of the siphon wall musculature. In response to medium-intensity stimulation, the siphon retractor muscles are activated along with local reflex activity.

2. A neural correlate of this behavioural discrimination between low and medium stimulus intensities was obtained by simultaneous intracellular recordings from pairs of efferent neurones, one neurone type involved in local reflexes and one efferent to the siphon retractor muscles. The peripherally located neurones of the siphon wall musculature (cluster cells) were found to have a lower spike threshold than the efferents to the siphon retractor muscles (pallial neurones).

3. Several lines of evidence are presented that support the assumption that intrasomatic recordings from these neurones accurately reflect the activity of the synaptic region.

4. The membrane electrical properties (i.e. input resistance, rheobasic current, threshold potential) of the two cell types were measured by passing current through single intrasomatic micro-electrodes. From these measurements it was found that the ‘critical firing level’ of the cluster cells is significantly lower than that of the pallial neurones. By way of their differential sensitivities to synaptic input, the stimulusintensity discrimination could be mediated by cluster cells and pallial neurones directly.

Paracellular water uptake and molecular sieving by the foot epithelium of terrestrial slugs

A paracellular pathway in the foot epithelium of Lehmannia valentiana can be opened by dehydrating the slug. Movement of water from a wet pad through the opened pathway into the haemolymph of this terrestrial slug is rapid. The sieving properties of this paracellular pathway have been determined using the reference isotope 3HOH and various 14C-labelled solutes. Paracellular uptake of 14C-insulin (Fig. 1) and 3HOH (Fig. 2) is initial rate for at least 3 min. If the wet pad contains 1,000 cpm of 14C per ml of 3HOH, slugs absorb only about 400 cpm of 14C with each ml of 3HOH absorbed representing a sieving ratio of 0.4 for insulin. The sieving ratio of 14C-inulin does not change when the concentration is increased from 0.1 to 2.5 mmol/l. Moreover, the sieving ratio of 14C-inulin was not affected significantly by the nature of the labelling, i.e., 14C-carboxyl vs 14C-methoxy. Sieving ratios for 14C-mannitol (182 Da), 14C-polyethylene glycol (4,000 Da), and 14C-inulin (5,250 Da) were 0.92, 0.63, and 0.39, respectively (Table 1), indicating that sieving is dependent on molecular size. 14C-Dextran (70,000 Da) and blue dextran (200,000 Da) were excluded from the paracellular pathway (Fig. 4). The effective pore size of the paracellular pathway was estimated using the relationships between sieving ratio and molecular weight of 3HOH and the various solutes that can pass through the pathway. The extrapolated pore size is equivalent to that of a sieve having a molecular weight cutoff of about 10,000 Da (Fig 3).