Normal background levels of air and surface mould reserve in English residential building stock: a preliminary study towards benchmarks based on NAHA measurements

This paper reports results obtained from a surface (both visually clean and dirty/dusty surfaces) and active (aggressive or activated) air testing scheme on 140 residential rooms in England, without visible water damage or mould growth, along with a few rooms with visible mould growth/water damage tested for comparison purposes. The aim was to establish normal background levels of mould in non-water-damaged interiors to benchmark a 'normal' indoor environment, and in turn when there is a need for further investigation, and, possibly, remediation. Air and surface mould was quantified based on the activity of β-N-acetylhexosaminidase (EC 3.2.1.52; NAHA). The obtained readings showed a log-normal distribution. Ninety-eight percent of the samples obtained from visually clean surfaces were equal to or less than 25 relative fluorescence units (RFU), which is suggested to be the higher bound for the range which can be used as a success criterion for surface cleaning/remediation. Of samples obtained from visually dirty/dusty surfaces, around 98% were below 450 RFU, which is suggested to define the lower-bound for abnormally high levels of mould, rare even on dirty/dusty surfaces. Similarly, around 98% of the air samples were found to have 1700 RFU or below. Values above 1700 RFU are therefore deemed unlikely in a non-problem indoor environment and can be indicative of a possible problem inducing mould growth. The samples with values below 1700 were further divided into three proposed sub-categories. Finally, the obtained RFU values and the suggested benchmarks were compared to those obtained from 17 non-residential indoor environments tested previously in Copenhagen, and the benchmarks that are currently used in Danish national standards, and they were both found to be highly congruent, suggesting that local climate regimes and room functions might not be as influential on indoor mould levels as commonly thought, or that the nuances between England and Denmark in terms of these factors are not strong enough to lead to sizable changes in the typical indoor mould levels in these countries' building stocks.

Indoor mould testing in a historic building: Blickling Hall

Indoor mould growth is a growing concern for all stakeholders of built environment, including residents, builders, insurance and building remediation industry as well as custodians of heritage buildings. The National Trust has reported this problem in a number of buildings under their ownership, and developed solutions and fine-tuned their maintenance programme so as to minimise indoor and surface mould growth risk. This paper reports findings from an extensive mould-testing scheme in Blickling Hall, a National Trust property in Norfolk, England, for an appraisal of airborne and surface mould levels within a total of eight rooms, including the famous Long Gallery. The testing protocol used combines active (aggressive) air sampling and surface sampling, analysis of the β-N-acetylhexosaminidase (NAHA) activity to quantify mould levels and particle counting. The results show that the airborne mould levels are quite low in all spaces, due to satisfactory maintenance of indoor hygrothermal conditions by conservation heating. On the other hand, while the National Trust's developed solutions and maintenance programme have proved effective to avoid surface mould growth in those locations that historically suffered from microbial activity (such as behind book presses, picture frames and tapestries), the results show that the surface cleaning around windows should be improved to tackle surface water due to condensation, which is considered to be the main driver behind high surface NAHA activity obtained in these areas.