Cell Viability Assessment of PEDOT Conducting Polymer-Coated Microneedles for Skin Sampling

Recently, transdermal monitoring and drug delivery have gained much interest, owing to the introduction of the minimally invasive microneedle (MN) device. The advancement of electroactive MNs electrically assisted in the capture of biomarkers or the triggering of drug release. Recent works have combined conducting polymers (CPs) onto MNs owing to the soft nature of the polymers and their tunable ionic and electronic conductivity. Though CPs are reported to work safely in the body, their biocompatibility in the skin has been insufficiently investigated. Furthermore, during electrical biasing of CPs, they undergo reduction or oxidation, which in practical terms leads to release/exchange of ions, which could pose biological risks. This work investigates the viability and proliferation of skin cells upon exposure to an electrochemically biased MN pair comprising two differently doped poly(3,4-ethylenedioxy-thiophene) (PEDOT) polymers that have been designed for skin sampling use. The impact of biasing on human keratinocytes and dermal fibroblasts was determined at different initial cell seeding densities and incubation periods. Indirect testing was employed, whereby the culture media was first exposed to PEDOTs prior to the addition of this extract to cells. In all conditions, both unbiased and biased PEDOT extracts showed no cytotoxicity, but the viability and proliferation of cells cultured at a low cell seeding density were lower than those of the control after 48 h of incubation.

PEDOT coated microneedles towards electrochemically assisted skin sampling

Skin sampling is a diagnostic procedure based on the analysis of extracted skin tissues and/or the observation of biomarkers in bodily fluids. Sampling using microneedles (MNs) that minimize invasiveness is gaining attention over conventional biopsy/blood lancet. In this study, new MNs for electrochemically assisted skin sampling are reported, specifically tailored for combined skin tissue biopsy and interstitial fluid (ISF) extraction. To overcome risks associated with using metal MNs, a highly electroactive, mechanically flexible, and biocompatible organic conducting polymer (CP) coated onto plastic is chosen as an alternative. Two different variants of doped poly(3,4-ethylenedioxythiophene) are coated on polymethyl methacrylate and used in combination as a MN pair with subsequent testing via a variety of electrochemical techniques to (i) give real-time information of the MN penetration depth into the skin, and (ii) yield new information on various salts present in the ISF. The MN skin sampler shows the ability to extract ions from the hydrated excised skin as a step towards in vivo ISF extraction. The presence of ions was analyzed using X-ray photoelectron spectroscopy. This added chemical information in conjunction with the existing biomarker analysis increases opportunity for disease/condition detection. For example, in the case of psoriasis, information about salt in the skin is invaluable in combination with pathogenic gene expression for diagnosis.

Spectral manifestation of optical Tamm states in a metal-cholesteric liquid crystals stack

The reflection spectrum of linearly polarized light by a system consisting of a metal film and two adjacent sequentially located cholesteric liquid crystals (CLCs) with opposite helical twists is theoretically studied. The system contains a dielectric index-matching layer (DIML) between the metal film and the CLC layers. It is shown that in such a system the excitation of optical Tamm states (OTSs) by linearly polarized light is possible. The influence of the CLC pitch, refractive indices, and thicknesses of the DIML and metal film on the OTS manifestation in the reflection spectrum of the system is studied. The strong influence of the DIML thickness on the OTS wavelength and the appearance of multiple OTSs with an increase in the DIML thickness is noted.

Understanding PEDOT doped with tosylate

Now in their 5th decade of research and development, conducting polymers represent an interesting class of materials to underpin new wearable or conformable electronic devices. Of particular interest over the years has been poly(3,4-ethylenedioxythiophene), commonly known as PEDOT, owing to its ease of fabrication and relative stability under typical ambient conditions. Understanding PEDOT from a variety of fundamental and applied perspectives is important for how it can be enhanced, modified, functionalised, and/or processed for use in commercial products. This feature article highlights the contribution of the research team at the University of South Australia led by Professor Evans, and their collaborators, putting their work into the broader context of conducting polymer research and application. This review focuses on the vapour synthesis of PEDOT doped with the tosylate anion, the benefits of controlling its morphology/structure during synthesis, and its application as an active material interacting with secondary anions in sensors, energy devices and drug delivery.

Charge trapping by iodine ions in photorefractive Sn2P2S6 crystals

Electron paramagnetic resonance (EPR) is used to establish the role of iodine as an electron trap in tin hypothiodiphosphate (Sn₂P₂S₆) crystals. Iodine ions are unintentionally incorporated when the crystals are grown by the chemical-vapor-transport method with SnI₄ as the transport agent. The Sn₂P₂S₆ crystals consist of Sn²⁺ ions and (P₂S₆)^4- anionic groups. During growth, an iodine ion replaces a phosphorus in a few of the anionic groups, thus forming (IPS₆)^4- molecular ions. Following an exposure at low temperature to 633 nm laser light, these (IPS₆)^4- ions trap an electron and convert to EPR-active (IPS₆)^5- groups with S = 1/2. A concentration near 1.1 × 10¹⁷ cm^-3 is produced. The EPR spectrum from the (IPS₆)^5- ions has well-resolved structure resulting from large hyperfine interactions with the ¹²⁷I and ³¹P nuclei. Analysis of the angular dependence of the spectrum gives principal values of 1.9795, 2.0123, and 2.0581 for the g matrix, 232 MHz, 263 MHz, and 663 MHz for the ¹²⁷I hyperfine matrix, and 1507 MHz, 1803 MHz, and 1997 MHz for the ³¹P hyperfine matrix. Results from quantum-chemistry modeling (unrestricted Hartree-Fock/second-order Møller-Plesset perturbation theory) support the (IPS₆)^5- assignment for the EPR spectrum. The transient two-beam coupling gain can be improved in these photorefractive Sn₂P₂S₆ crystals by better controlling the point defects that trap charge.

Spectrally tunable chiral Bragg reflectors for on-demand beam generation

We demonstrate the generation of spectrally tunable phase-dependent wavefronts, using the 2D Airy as the primary test case, via a polymer-stabilized cholesteric liquid crystal (PSCLC) element. Specifically, we use a novel spatial light modulator (SLM) based projection system to photo-align the initial helix angle landscape of the PSCLC so that it imparts the appropriate cubic phase profile to the reflected beam. This element is spectrally selective, with a reflection bandwidth of ≈ 100 nm, and electrically tunable from λ = 530 nm to 760 nm. Under both green and red laser illumination, the element is shown to conditionally form an Airy beam depending on the position of the electrically tailored reflection band. We briefly demonstrate the generality of this approach by producing PSCLC elements which form a computer-generated hologram and a higher-order Mathieu beam.

Influence of Postsynthesis Heat Treatment on Vapor-Phase-Polymerized Conductive Polymers

The effect of thermal treatment on the structure and electrical/optical properties of vapor phase-polymerized poly(3,4-ethylenedioxythiophene):tosylate (PEDOT:Tos) and polypyrrole:tosylate (PPy:Tos) polymer films was investigated. Thermal treatment was applied postpolymerization but prior to washing the embedded oxidant layer out of the polymer film. Structural and chemical changes arising from the treatment were studied in the context of their conductive and electrochromic behavior. Spectroscopic analysis indicated a rise in the doping levels of both conductive polymers when exposed to thermal treatment. Additionally, an increase in the film thickness was recorded after the oxidant and other unbound species were removed from the polymer layer using an ethanol rinse. As such, a strong indication that polymerization continued even in the absence of (external) monomer vapor was present. This film thickness increase was most pronounced for PPy:Tos but also present in the PEDOT:Tos film. Heat-treated films exhibited enhanced cohesion, making them more robust and therefore increasing the viability for the material to be used in the optoelectronics area. This robustness, due to additional (cross-linking) oligomer growth, came at the expense of lower conductivity relative to their untreated counterparts.

A Pasteurised Concentrate of Human Plasma Factor XIII for Therapeutic Use

A therapeutic concentrate of factor XIII containing both A and B sub-units has been prepared from 300 kg pools of human plasma. The process starts from a cold-ethanol fraction from cryoprecipitate supernatant and therefore does not interfere with the recovery of other clinically valuable plasma proteins. Factor XIII is purified approximately 600-fold from plasma by precipitation with sodium citrate and by the removal of fibrinogen by brief heating. The product has been pasteurised in sorbitol solution to inactivate blood-borne viruses, ultrafiltered to remove sorbitol, adsorbed with bentonite and freeze-dried in a formulation meeting requirements for intravenous injection.

Flexoelectro-optic effect and two-beam energy exchange in a hybrid photorefractive cholesteric cell with a short-pitch horizontal helix

We develop a theoretical model to describe two-beam energy exchange in a hybrid photorefractive cholesteric cell with a short-pitch helix oriented parallel to the cell substrates (so-called uniformly lying helix configuration). Weak and strong light beams incident on the hybrid cell interfere and induce a periodic space-charge field in the photorefractive substrate of the cell, which penetrates into the cholesteric liquid crystal (LC). Due to the flexoelectro-optic effect an interaction of the photorefractive field with the LC flexopolarization causes the spatially periodic modulation of the helix axis in the plane parallel to the cell substrates. Coupling of a weak signal beam with a strong pump beam at the LC permittivity grating, induced by the periodically tilted helix axis, leads to the energy gain of the weak signal beam. Dependence of the signal beam gain coefficient on the parameters of the short-pitch cholesteric LC is studied.

Liquid crystal control of the plasmon resonances at terahertz frequencies in graphene microribbon gratings

We theoretically study the influence of the liquid crystal (LC) orientational state on the absorption, reflection, and transmission spectra of a graphene microribbon grating placed between a nematic LC and an isotropic dielectric substrate. We calculate the absorption, reflection, and transmission coefficients at normal incidence of a far-infrared transverse magnetic wave (THz) and show that control of the orientational state of the LC layer enables the manipulation of the magnitude of the absorption and reflection maxima. The influence the LC orientational state on the plasmonic resonance increases with increasing the isotropic substrate dielectric constant and the graphene microribbon width to grating spacing ratio.

Cloaking by shells with radially inhomogeneous anisotropic permittivity

We model electromagnetic cloaking of a spherical or cylindrical nanoparticle enclosed by an optically anisotropic and optically inhomogeneous symmetric shell, by examining its electric response in a quasi-static uniform electric field. When the components of the shell permittivity are radially anisotropic and power-law dependent (ε~r(m)) whereris distance to the shell center, and m a positive or negative exponent which can be varied), the problem is analytically tractable. Formulas are calculated for the degree of cloaking in the general case, allowing the determination of a dielectric condition for the shells to be used as an invisibility cloak. Ideal cloaking is known to require that homogeneous shells exhibit an infinite ratio of tangential and radial components of the shell permittivity, but for radially inhomogeneous shells ideal cloaking can occur even for finite values of this ratio.

Acido-basic control of the thermoelectric properties of poly(3,4-ethylenedioxythiophene)tosylate (PEDOT-Tos) thin films

PEDOT-Tos is one of the conducting polymers that displays the most promising thermoelectric properties. Until now, it has been utterly difficult to control all the synthesis parameters and the morphology governing the thermoelectric properties. To improve our understanding of this material, we study the variation in the thermoelectric properties by a simple acido-basic treatment. The emphasis of this study is to elucidate the chemical changes induced by acid (HCl) or base (NaOH) treatment in PEDOT-Tos thin films using various spectroscopic and structural techniques. We could identify changes in the nanoscale morphology due to anion exchange between tosylate and Cl^- or OH^-. But, we identified that changing the pH leads to a tuning of the oxidation level of the polymer, which can explain the changes in thermoelectric properties. Hence, a simple acid-base treatment allows finding the optimum for the power factor in PEDOT-Tos thin films.

Optimizing nonlinear beam coupling in low-symmetry crystals

The purpose of this paper is to find the polarizations and spatial orientations of the two interacting counterpropagating coherent light waves which ensure the largest beam coupling in monoclinic photorefractive crystal. The results of calculations are presented that are verified experimentally with Sn₂P₂S₆.

Laser actuation of cantilevers for picometre amplitude dynamic force microscopy

As nanoscale and molecular devices become reality, the ability to probe materials on these scales is increasing in importance. To address this, we have developed a dynamic force microscopy technique where the flexure of the microcantilever is excited using an intensity modulated laser beam to achieve modulation on the picoscale. The flexure arises from thermally induced bending through differential expansion and the conservation of momentum when the photons are reflected and absorbed by the cantilever. In this study, we investigated the photothermal and photon pressure responses of monolithic and layered cantilevers using a modulated laser in air and immersed in water. The developed photon actuation technique is applied to the stretching of single polymer chains.

Aqueous processing of graphene-polymer hybrid thin film nano-composites and gels

Research into the structure, properties and applications of graphene has moved at a tremendous pace over the past few years. This review describes one aspect of this research, that of the incorporation of graphene particles with a range of polymers to create novel hybrid materials with increased functionality such as improved conductance, increased strength and introduced biocompatibility or cytotoxicity. This review focuses on dispersing graphene in polymer matrices, both insulating and conducting. Additionally, a brief discussion of carbon based platelet production methods is given in order to provide context on the subsequent use of this family of materials such as graphene, graphene oxide (GO) and reduced graphene oxide (rGO) incorporated into polymeric thin films.

Semi-metallic polymers

Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being suitable for thermoelectric applications. We measure the thermoelectric properties of various poly(3,4-ethylenedioxythiophene) samples, and observe a marked increase in the Seebeck coefficient when the electrical conductivity is enhanced through molecular organization. This initiates the transition from a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics.

Achieving enhanced gain in photorefractive polymers by eliminating electron contributions using large bias fields

Photorefractive polymers have been extensively studied for over two decades and have found applications in holographic displays and optical image processing. The complexity of these materials arises from multiple charge contributions, for example, leading to the formation of competing photorefractive gratings. It has been recently shown that in a photorefractive polymer at relatively moderate applied electric fields the primary charge carriers (holes) establish an initial grating, followed by a subsequent competing grating (electrons) resulting in a decreased two-beam coupling and diffraction efficiencies. In this paper, it is shown that with relatively large sustainable bias fields, the two-beam coupling efficiency is enhanced owing to a decreased electron contribution. These results also explain the cause of dielectric breakdown experienced under large bias fields. Our conclusions are supported by self-pumped transient two-beam coupling and photocurrent measurements as a function of applied bias fields at different wavelengths.

Intrinsic small polarons (Sn³⁺ ions) in photorefractive Sn₂P₂S₆ crystals

Unique holelike small polarons are produced at divalent cation sites by optical excitation at low temperature in single crystals of Sn2P2S6, a monoclinic ferroelectric and photorefractive material. Electron paramagnetic resonance (EPR) is used to observe these self-trapped holes. During an illumination near 25 K with either 442 or 633 nm laser light, photoexcited holes become localized at Sn(2+) (5s(2)) ions and form paramagnetic Sn(3+) (5s(1)) ions. The Sn(3+) ions are thermally stable below 50 K. The principal values of the g matrix are 2.0031, 2.0176, and 2.0273 and the principal values of the (119)Sn hyperfine matrix are 12.828, 12.886, and 13.060 GHz. The large interaction with the (119)Sn (and (117)Sn) nucleus results in a highly asymmetric hyperfine pattern in the EPR spectrum. Weaker hyperfine interactions with two neighboring Sn ions are also observed.

A comparison of the accuracy of film-screen mammography, full-field digital mammography, and digital breast tomosynthesis

AIM

To measure the change in diagnostic accuracy of conventional film-screen mammography and full-field digital mammography (FFDM) with the addition of digital breast tomosynthesis (DBT) in women recalled for assessment following routine screening.

MATERIALS AND METHODS

Ethics approval for the study was granted. Women recalled for assessment following routine screening with screen-film mammography were invited to participate. Participants underwent bilateral, two-view FFDM and two-view DBT. Readers scored each lesion separately for probability of malignancy on screen-film mammography, FFDM, and then DBT. The scores were compared with the presence or absence of malignancy based on the final histopathology outcome.

RESULTS

Seven hundred and thirty-eight women participated (93.2% recruitment rate). Following assessment 204 (26.8%) were diagnosed as malignant (147 invasive and 57 in-situ tumours), 286 (37.68%) as benign, and 269 (35.4%) as normal. The diagnostic accuracy was evaluated by using receiving operating characteristic (ROC) and measurement of area under the curve (AUC). The AUC values demonstrated a significant (p = 0.0001) improvement in the diagnostic accuracy with the addition of DBT combined with FFDM and film-screen mammography (AUC = 0.9671) when compared to FFDM plus film-screen mammography (AUC = 0.8949) and film-screen mammography alone (AUC = 0.7882). The effect was significantly greater for soft-tissue lesions [AUC was 0.9905 with the addition of DBT and AUC was 0.9201 for FFDM with film-screen mammography combined (p = 0.0001)] compared to microcalcification [with the addition of DBT (AUC = 0.7920) and for FFDM with film-screen mammography combined (AUC = 0.7843; p = 0.3182)].

CONCLUSION

The addition of DBT increases the accuracy of mammography compared to FFDM and film-screen mammography combined and film-screen mammography alone in the assessment of screen-detected soft-tissue mammographic abnormalities.

Asymmetric Freedericksz transitions from symmetric liquid crystal cells doped with harvested ferroelectric nanoparticles

The electrical Freedericksz transition characteristics of planar aligned liquid crystal cells doped with harvested single ferroelectric domain 9 nm nanoparticles of BaTiO(3) have been measured. We demonstrate for the first time that the electrical pre-history of the cells imparts significant polarity sensitivity to the Freedericksz characteristics. The presence of harvested single domain ferroelectric nanoparticles enables cells to be programmably semi-permanently polarized. This reduces or increases the Freedericksz transition threshold by 0.8 V, depending on the polarity of the applied voltage, giving a net 1.6 V Freedericksz threshold asymmetry for 8 mum thick cells filled with TL205 liquid crystal.

Voyager planetary radio astronomy at neptune

Detection of very intense short radio bursts from Neptune was possible as early as 30 days before closest approach and at least 22 days after closest approach. The bursts lay at frequencies in the range 100 to 1300 kilohertz, were narrowband and strongly polarized, and presumably originated in southern polar regions ofthe planet. Episodes of smooth emissions in the frequency range from 20 to 865 kilohertz were detected during an interval of at least 10 days around closest approach. The bursts and the smooth emissions can be described in terms of rotation in a period of 16.11 +/- 0.05 hours. The bursts came at regular intervals throughout the encounter, including episodes both before and after closest approach. The smooth emissions showed a half-cycle phase shift between the five episodes before and after closest approach. This experiment detected the foreshock of Neptune's magnetosphere and the impacts of dust at the times of ring-plane crossings and also near the time of closest approach. Finally, there is no evidence for Neptunian electrostatic discharges.

Voyager 2 radio observations of uranus

Within distances to Uranus of about 6 x 10(6) kilometers (inbound) and 35 x 10(6) kilometers (outbound), the planetary radio astronomy experiment aboard Voyager 2 detected a wide variety of radio emissions. The emission was modulated in a period of 17.24 +/- 0.01 hours, which is identified as the rotation period of Uranus' magnetic field. Of the two poles where the axis of the off-center magnetic dipole (measured by the magnetometer experiment aboard Voyager 2) meets the planetary surface, the one closer to dipole center is now located on the nightside of the planet. The radio emission generally had maximum power and bandwidth when this pole was tipped toward the spacecraft. When the spacecraft entered the nightside hemisphere, which contains the stronger surface magnetic pole, the bandwidth increased dramatically and thereafter remained large. Dynamically evolving radio events of various kinds embedded in these emissions suggest a Uranian magnetosphere rich in magnetohydrodynamic phenomena.

Two-beam energy exchange in a hybrid photorefractive-flexoelectric liquid-crystal cell

We develop a semiquantitative theory to describe the experimentally observed energy gain when two light beams intersect in hybrid organic-inorganic photorefractives. These systems consist of a nematic liquid-crystal (LC) layer placed between two photorefractive windows. A periodic space-charge field is induced by the interfering light beams in the photorefractive windows. The field penetrates into the LC, interacting with the nematic director and giving rise to a diffraction grating. LC flexoelectricity is the principal physical mechanism driving the grating structure. Each light beam diffracts from the induced grating, leading to an apparent energy gain and loss within each beam. The LC optics is described in the Bragg regime. In the theory the exponential gain coefficient is a product of a beam interference term, a flexoelectricity term and a space-charge term. The theory has been compared with results of an experimental study on hybrid cells filled with the LC mixture TL 205. Experimentally the energy gain is maximal at much lower grating wave numbers than is predicted by naïve theory. However, if the director reorientation is cubic rather than linear in the space-charge field term, then good agreement between theory and experiment can be achieved using only a single fitting parameter. We provide a semiquantitative argument to justify this nonlinearity in terms of electric-field-induced local phase separation between different components of the liquid crystal.

Day-case angioplasty in diabetic patients with critical ischemia

AIM

Recent studies have shown that percutaneous transluminal angioplasty (PTA) can be safely performed as a day-case procedure. Many centers consider diabetes mellitus as a contraindication to day-case PTA. In this study, the safety and efficacy of 95 day-case PTA in 66 diabetic patients with critical leg ischemia (CLI) were evaluated.

METHODS

Diabetic patients with CLI were assessed in a one-stop multidisciplinary outpatient clinic. Sixty-six outpatients with CLI deemed suitable for radiological intervention by non-invasive imaging (ultrasound angiology or magnetic resonance angiography) were scheduled for day-case PTA.

RESULTS

PTA was initially successful in 63 out of 66 patients (95%). In 3 patients (5%), PTA was not possible because the lesion could not be balloon dilated or crossed with a guide wire. Clinically suspected first, second and third re-stenosis confirmed by non-invasive studies occurred in 20 out of 63 (31%), 7 out of 20 (35%) and 2 out of 7 (28%) patients, respectively. Following PTA, debridement was performed in 11 patients (17%), minor amputation in 8 (13%) and major amputation in 3 (5%). Relief of the primary symptom of rest pain or healing of ulcers was achieved in 23 out of 32 (72%) and 25 out of 27 (92.5%) patients, respectively. No peri-interventional morbidity or mortality was encountered.

CONCLUSION

PTA is feasible and safe as a day-case procedure in diabetic patients with CLI. Re-stenosis can be managed by repeat day-case PTA.

Nanoparticle doped organic-inorganic hybrid photorefractives

The gain characteristics of liquid crystal photorefractive cells doped with ferroelectric nanoparticles has been measured. The liquid crystal two beam coupling gain is found to reverse in sign and increase in magnitude through the addition of ferroelectric BaTiO(3) nanoparticles, yielding gain coefficients up to 1100 cm(-3) in the Bragg regime. We attribute the novel effects of gain reversal and magnitude increase to interactions between the ferroelectric particles' spontaneous polarization and the local liquid crystal flexopolarization.

Day-case diagnostic and interventional peripheral angiography: 10-year experience in a radiology specialist nurse-led unit

We describe a prospective evaluation of the safety of peripheral angiography procedures performed on day-case patients in a dedicated radiological nurse-led and administrated unit. Patients referred for peripheral vascular angiography, over a 10-year period, were pre-assessed by a radiology specialist nurse in a nurse-led clinic. Radiologists performed all procedures, whereas radiology specialist nurses were responsible for patient care before, during and after angiography and during the 24 h follow-up. Procedures were divided into diagnostic or interventional; complications were divided into immediate or delayed (24 h follow-up) either requiring hospital admission (major) or day-case unit management (minor). Patient acceptability was assessed using a standard questionnaire. Cost analysis was also performed. 401 day-case peripheral angiography procedures (144 diagnostic and 257 interventional) were performed in 310 patients. 109/401 (27.2%) procedures were performed on patients with diabetes mellitus. In diagnostic studies, 16/144 (11.1%) immediate and 6/144 (4.2%) delayed complications occurred whereas, in interventional studies, 65/257 (25.3%) immediate and 13/257 (5.1%) delayed complications were noted. A major complication occurred in 17/257 (6.6%) of patients in the interventional group and 3/144 (2.1%) in the diagnostic group. Puncture site haematoma was the most common complication. Nurse-led care was acceptable to the patient, with a high level of patient satisfaction seen. In conclusion, day-case diagnostic and interventional peripheral angiography procedures can be performed safely in a specialist nurse-led and administrated unit, with complication rates being within the accepted guidelines.

Direct temperature dependence measurements of dark conductivity and two-beam coupling in LiNbO3:Fe

Direct measurements of dark conductivity were conducted over a broad temperature range in LiNbO(3):Fe. These measurements were performed on a series of crystals, which were cut from the same boule and subjected to different annealing procedures (oxidized, reduced, and as-grown). Activation energies of 0.5 eV and 1.1 eV were extracted from Arrhenius plots of the dark conductivity data. The location of the Fe(2+) energy level in the band gap was determined, and is in agreement with Born's principle. A correlation between the Maxwell relaxation times and the onset of a temperature-dependent reduction in two-beam coupling efficiency was observed.

Ferroelectric-specific stark effect in stoichiometric LiNbO3:Fe at room temperature

By means of EPR spectroscopy of LiNbO(3):Fe at room temperature (RT) it is shown that the Stark effect in ferroelectric crystals can be different from that observed in other materials. Novel properties appear when an external E field reverses the direction of the spontaneous polarization, the direction of the linear Stark shift stays the same with a reversal of the E field. The corresponding spectral line shifts can occur over a long time scale (hours). These properties seem to be a general feature of the Stark effect in ferroelectric crystals when the external E field exceeds the coercive field.

Stimulated photorefractive backscatter leading to six-wave mixing and phase conjugation in iron-doped lithium niobate

The generation of multiple waves during near-oblique incidence of a 532 nm weakly focused beam on photorefractive iron-doped lithium niobate in a typical reflection geometry configuration is studied. It is shown that these waves are produced through two-wave coupling (self-diffraction) and four-wave mixing (parametric diffraction). One of these waves, the stimulated photorefractive backscatter produced from parametric diffraction, contains the self-phase conjugate. The dynamics of six-wave mixing and its dependence on crystal parameters, angle of incidence, and pump power are analyzed. What we believe to be a novel order analysis of the interaction equations provides further insight into experimental observations in the steady state. The quality of the backscatter is evaluated through image restoration, interference experiments, and visibility measurement. Reduction of two-wave coupling may significantly improve the quality of the self-phase conjugate.

Transient gain enhancement in photorefractive crystals with two types of movable charge carrier

Considerable improvement of a transient two-beam coupling gain is reported for Sn(2)P(2)S(6), a photorefractive crystal that possesses two types of movable charge carrier. A gain enhancement occurs if the phase difference of the interacting beams is abruptly changed to pi. Enhancement is also achieved with periodic phase variations of zero and pi between two discrete states at modulation frequencies lower than the smallest of two reciprocal characteristic times of the space-charge formation.

Physical properties of phase-change emulsions

Phase-change emulsions (PCE) are important in a variety of applications, from ultrasound imaging to the explosive material used in the mining industry, but until now there has been no adequate theory to describe their activation properties. The PCE consists of a low-boiling-point liquid, known as the volatile phase, dispersed in an aqueous phase. The volatile phase boils as a result of an increase in the temperature of the emulsion. The volume of the emulsion will increase during this phase transition, with the transition temperature and final volume of the emulsion highly dependent on the initial radius of the liquid droplets. Here a description of the change in boiling point and freezing point of the volatile phase, as well as the volume change of a droplet in the emulsion as a function of the initial droplet radius, is presented. The influence of volatile phase solubility, liquid-liquid interfacial tension, and final temperature are explored, accounting for the influence of confinement on the properties of the volatile phase. Beyond this, a means by which the diffusivity of the gas in the continuous liquid phase can be measured is derived.

The Origin of Surface Stress Induced by Adsorption of Iodine on Gold

The cantilever technique for the measurement of film stress on both macroscopic and microscopic cantilevers is validated, then applied to the experimental determination of film stress induced by the adsorption of a monolayer of iodine onto a gold substrate. A model is proposed that relates the change in the interatom potential upon chemisorption of iodine onto gold to the measured film stress. Excellent agreement is found with the experimentally determined value. This result gives insight into the origins of film stress that is observed in all thin film and coating applications.

Sensing Cantilever Beam Bending by the Optical Lever Technique and Its Application to Surface Stress

Cantilever beams, both microscopic and macroscopic, are used as sensors in a great variety of applications. An optical lever system is commonly employed to determine the deflection and thereby the profile of the cantilever under load. The sensitivity of the optical lever must be calibrated, and this is usually achieved by application of a known load or deflection to the free end of the cantilever. When the sensing operation involves a different type of load or a combination of types of loadings, the calibration and the deflection values derived from it become invalid. Here we develop a master equation that permits the true deflection of the cantilever to be obtained simply from the measurement of the apparent deflection for uniformly distributed loadings and end-moment loadings. These loadings are relevant to the uniform adsorption or application of material to the cantilever or the application of a surface stress to the cantilever and should assist experimentalists using the optical lever, such as in the atomic force microscope, to measure cantilever deflections in a great variety of sensing applications. We then apply this treatment to the experimental evaluation of surface stress. Three forms of Stoney's equation that relate the apparent deflection to the surface stress, which is valid for both macroscopic and microscopic experiments, are derived. Analysis of the errors arising from incorrect modeling of the loading conditions of the cantilever currently applied in experiments is also presented. It is shown that the reported literature values for surface stress in microscopic experiments are typically 9% smaller than their true value. For macroscopic experiments, we demonstrate that the added mass of the film or coating generally dominates the measured deflection and must be accounted for accurately if surface stress measurements are to be made. Further, the reported measurements generally use a form of Stoney's equation that is in error, resulting in an overestimation of surface stress by a factor >5.

Major improvements of the photorefractive and photovoltaic properties in potassium niobate

Optical and electrical measurements have been made on a new codoped potassium niobate crystal (KNbO3:Fe,Ag) that yields a significant enhancement of the photorefractive and photovoltaic effects when compared with the published results for singly doped potassium niobate crystals. The codoped Ag impurity enters the K site, rather than the typical Nb site, thus changing the local field in the lattice. It is believed that Fe perturbed by the Ag in the K site is responsible for an enhancement of the linear absorption and photocurrent, as well as a probable increase in the effective trap density. An enhanced trap density is likely the cause of the increased photorefractive counterpropagating two-beam coupling efficiency.

Red blood cell membrane essential fatty acid metabolism in early psychotic patients following antipsychotic drug treatment

A role of indices of oxidative stress, oxidative injury, and abnormal membrane phospholipid, specifically the phospholipid essential polyunsaturated fatty acids (EPUFAs) metabolism has been suggested based on studies in separate groups of patients with or without medication. The current study investigated the relationship between these biochemical measures in first-episode psychotic patients (N=16) at baseline and after 6 months of antipsychotic treatment (N=5 each with risperidone and olanzapine) and compared them to matched normal subjects. The indices of oxidative stress included: antioxidant enzymes; superoxide dismutase, glutathione peroxidase and catalase; and the oxidative injury as the levels of plasma lipid peroxides. The key membrane EPUFA's been; linolenic acid, arachidonic acid, nervonic acid, docosapentaenoic acid and docosahexaenoic acid. Furthermore, the changes in these biochemical measures were correlated with clinical symptomatology. Data indicated that, at baseline, reduced levels of antioxidant enzymes were associated with increased plasma lipid peroxides and reduced membrane EPUFAs, particularly omega-3 fatty acids. Furthermore, these biochemical measures normalized after 6 months of antipsychotic treatment. Parallel-improved psychopathology indicated that membrane EPUFA status might be partly affected by oxidative damage, which together may contribute to the pathophysiology and thereby, psychopathology of schizophrenia. These data also support the augmentation of antipsychotic treatment by supplementation with a combination of antioxidants and omega-3 fatty acids.

Differential effects of chronic haloperidol and olanzapine exposure on brain cholinergic markers and spatial learning in rats

RATIONALE

In psychiatric patients, haloperidol (HAL) induces a number of adverse extrapyramidal and cognitive symptoms, which appear to be less problematic with olanzapine (OLZ). In animals, HAL may initiate a number of harmful effects on central nervous system neurons, including damage to cholinergic pathways - an effect that could be especially deleterious to those experiencing memory dysfunction. The identification of the neurobiological substrates of such effects in animal models may help to improve the algorithms used for proper drug selection especially for long-term neuroleptic use.

OBJECTIVES

The aim of this study was to compare the effects of chronic (45-day and 90-day), continuous oral exposure to HAL with OLZ for effects on cognitive performance and cholinergic markers in rats.

METHODS

After chronic neuroleptic exposure (and a 4-day washout) spatial memory performance was measured in a water maze task, and choline acetyltransferase (ChAT) immunoreactivity was assessed with immunofluorescence staining.

RESULTS

In water maze experiments, HAL and OLZ (relative to vehicle) administered for 90 days (but not 45 days) significantly impaired learning performance (i.e., higher mean latencies across several trials to reach a hidden platform). HAL administered for 90 days was associated with impairment across a greater number of trials than OLZ and it also impaired probe trial performance, as indicated by a reduced number of crossings over the previous platform area (when compared with OLZ or vehicle). Both 45 days and 90 days of HAL treatment reduced ChAT staining in the cortex and hippocampus when compared with OLZ or vehicle.

CONCLUSIONS

The results in the rat suggest that OLZ (relative to HAL) may be more desirable as an antipsychotic for patients suffering from memory dysfunction especially for those in which cholinergic deficits may already be present.

Contra-directional two-beam coupling by use of a single input beam in an iron-doped lithium niobate multimode fiber

Experimental results are presented for 1,800 contra-directional two-beam coupling (TBC) measurements in a single crystal fiber of LiNbO8:Fe using a single incident beam and its Fresnel reflection off the back surface of the fiber. To our knowledge, this is the first time that volume gratings have been written in a fiber using this beam coupling geometry. At small f-numbers, the TBC efficiency has been predicted to decrease in bulk LiNbO3:Fe due to the erasure of the weak gratings by the dark conductivity. We present experimental results validating the published theory and show experimentally that confinement of the interfering beams in a fiber geometry overcomes this limitation.

A novel carbamoyl-phosphate synthetase from Aquifex aeolicus

Aquifex aeolicus, an extreme hyperthermophile, has neither a full-length carbamoyl-phosphate synthetase (CPSase) resembling the enzyme found in all mesophilic organisms nor a carbamate kinase-like CPSase such as those present in several hyperthermophilic archaea. However, the genome has open reading frames encoding putative proteins that are homologous to the major CPSase domains. The glutaminase, CPS.A, and CPS.B homologs from A. aeolicus were cloned, overexpressed in Escherichia coli, and purified to homogeneity. The isolated proteins could catalyze several partial reactions but not the overall synthesis of carbamoyl phosphate. However, a stable 124-kDa complex could be reconstituted from stoichiometric amounts of CPS.A and CPS.B proteins that synthesized carbamoyl phosphate from ATP, bicarbonate, and ammonia. The inclusion of the glutaminase subunit resulted in the formation of a 171-kDa complex that could utilize glutamine as the nitrogen-donating substrate, although the catalytic efficiency was significantly compromised. Molecular modeling, using E. coli CPSase as a template, showed that the enzyme has a similar structural organization and interdomain interfaces and that all of the residues known to be essential for function are conserved and properly positioned. A steady state kinetic study at 78 degrees C indicated that although the substrate affinity was similar for bicarbonate, ammonia, and glutamine, the K(m) for ATP was appreciably higher than that of any known CPSase. The A. aeolicus complex, with a split gene encoding the major synthetase domains and relatively inefficient coupling of amidotransferase and synthetase functions, may be more closely related to the ancestral precursor of contemporary mesophilic CPSases.

Reduced protein phosphatase 2A activity induces hyperphosphorylation and altered compartmentalization of tau in transgenic mice

Hyperphosphorylated isoforms of the microtubule-associated protein tau are the major components of neurofibrillary lesions in Alzheimer's disease (AD). Protein phosphatase (PP) 2A is a major phosphatase implicated in tau dephosphorylation in vitro. Dephosphorylation of tau can be blocked in vivo by okadaic acid, a potent inhibitor of PP2A. Moreover, activity of PP2A is reduced in AD brains. To elucidate the role of PP2A in tau phosphorylation and pathogenesis, we expressed a dominant negative mutant form of the catalytic subunit Calpha of PP2A, L199P, in mice by using a neuron-specific promoter. We obtained mice with high expression levels of Calpha L199P in cortical, hippocampal, and cerebellar neurons. PP2A activity in brain homogenates of transgenic mice was reduced to 66%. Endogenous tau protein was hyperphosphorylated at distinct sites including the AT8 epitope Ser-202/Thr-205, a major AD-associated tau phosphoepitope. AT8-positive tau aggregates accumulated in the soma and dendrites of cortical pyramidal cells and cerebellar Purkinje cells and co-localized with ubiquitin. Our data establish that PP2A plays a crucial role in tau phosphorylation. Our results also show that reduced PP2A activity is associated with altered compartmentalization and ubiquitination of tau, resembling a key pathological finding in AD.

Cloning, expression, and structure analysis of carbamate kinase-like carbamoyl phosphate synthetase from Pyrococcus abyssi

Pyrococcus abyssi, a hyperthermophilic archaeon found in the vicinity of deep-sea hydrothermal vents, grows optimally at temperatures around 100 degrees C. Carbamoyl phosphate synthetase (CPSase) from this organism was cloned and sequenced. The active 34-kDa recombinant protein was overexpressed in Escherichia coli when the host cells were cotransformed with a plasmid encoding tRNA synthetases for low-frequency Escherichia coli codons. Sequence homology suggests that the tertiary structure of P. abyssi CPSase, resembling its counterpart in Pyrococcus furiosus, is closely related to the catabolic carbamate kinases and is very different from the larger mesophilic CPSases. P. furiosus CPSase and carbamate kinase form carbamoyl phosphate by phosphorylating carbamate produced spontaneously in solution from ammonia and bicarbonate. In contrast, P. abyssi CPSase has intrinsic bicarbonate-dependent ATPase activity, suggesting that the enzyme can catalyze the phosphorylation of the isosteric substrates carbamate and bicarbonate.

Active-site mutations impairing the catalytic function of the catalytic subunit of human protein phosphatase 2A permit baculovirus-mediated overexpression in insect cells

Members of the phosphoprotein phosphatase (PPP) family of protein serine/threonine phosphatases, including protein phosphatase (PP)1, PP2A and PP2B, share invariant active-site residues that are critical for catalytic function [Zhuo, Clemens, Stone and Dixon (1994) J. Biol. Chem. 269, 26234-26238]. Mutation of the active-site residues Asp(88) or His(118) within the human PP2A catalytic subunit (PP2Ac)alpha impaired catalytic activity in vitro; the D88N and H118N substitutions caused a 9- and 23-fold reduction in specific activity respectively, when compared with wild-type recombinant PP2Ac, indicating an important role for these residues in catalysis. Consistent with this, the D88N and H118N substituted forms failed to provide PP2A function in vivo, because, unlike wild-type human PP2Acalpha, neither substituted for the endogenous PP2Ac enzyme of budding yeast. Relative to wild-type PP2Ac, the active-site mutants were dramatically overexpressed in High Five insect cells using the baculovirus system. Milligram quantities of PP2Ac were purified from 1x10(9) High Five cells and the kinetic constants for dephosphorylation of the peptide RRA(pT)VA (single-letter amino-acid notation) by PP2Ac (K(m)=337.5 microM; k(cat)=170 s(-1)) and D88N (K(m)=58.4 microM; k(cat)=2 s(-1)) were determined. The results show that the substitution impairs catalysis severely without a significant effect on substrate binding, consistent with the PPP catalytic mechanism. Combination of the baculovirus and yeast systems provides a strategy whereby the structure-function of PP2Ac may be fully explored, a goal which has previously proven difficult, owing to the stringent auto-regulatory control of PP2Ac protein levels in vivo.

Targeted and extended acetylation of histones H4 and H3 at active and inactive genes in chicken embryo erythrocytes

Affinity-purified polyclonal antibodies recognizing the most highly acetylated forms of histones H3 and H4 were used in immunoprecipitation assays with chromatin fragments derived from 15-day chicken embryo erythrocytes by micrococcal nuclease digestion. The distribution of hyperacetylated H4 and H3 was mapped at the housekeeping gene, glyceraldehyde 3-phosphate dehydrogenase (GAPDH), and the tissue-specific gene, carbonic anhydrase (CA). H3 and H4 acetylation was found targeted to the CpG island region at the 5' end of both these genes, falling off in the downstream direction. In contrast, at the beta(A)-globin gene, both H3 and H4 are highly acetylated throughout the gene and at the downstream enhancer, with a maximum at the promoter. Low level acetylation was observed at the 5' end of the inactive ovalbumin gene. Run-on assays to measure ongoing transcription showed that the GAPDH and CA genes are transcribed at a much lower rate than the adult beta(A)-globin gene. The extensive high level acetylation at the beta(A)-globin gene correlates most simply with its high rate of transcription. The targeted acetylation of histones H3 and H4 at the GAPDH and CA genes is consistent with a role in transcriptional initiation and implies that transcriptional elongation does not necessarily require hyperacetylation.