Influence of silylated nano cellulose reinforcement on the mechanical, water resistance, thermal, morphological and antibacterial properties of soy protein isolate (SPI)-based composite films

The aim of this research work is to improve the mechanical and water-resistance properties of soy protein isolate (SPI) biofilm. In this work, 3-aminopropyltriethoxysilane (APTES) coupling agent modified nanocellulose was introduced into the SPI matrix in the presence of citric acid cross-linker. The presence of amino groups in APTES facilitated to form cross-linked structures with soy protein. The incorporation of a citric acid cross-linker made the cross-linking process more productive, and the surface smoothness of the film was confirmed by a Scanning Electron Microscope (FE-SEM). From the study of the mechanical and thermal properties and water resistance of the film, it was confirmed that the results were highly satisfactory for the modified nanocellulose incorporated film compared to the non-modified one. Additionally, coating of citral essential oil onto SPI nanocomposite film displayed antimicrobial properties due to the presence of various phenolic groups in the citral oil. The Tensile Strength and Young's Modulus of silane-modified nanocellulose containing film were enhanced by ~119 % and ~ 112 %, respectively on incorporation of 1 % APTES-modified nanocellulose. Consequently, this work is expected to offer an effective way for silylated nano-cellulose reinforcing soy protein isolate (SPI) based bio nanocomposite films for packaging applications. As an example, we have demonstrated one of the application as wrapping films for packing black grapes.

The Role of Two-Step Blending in the Properties of Starch/Chitin/Polylactic Acid Biodegradable Composites for Biomedical Applications

The current research trend for excellent miscibility in polymer mixing is the use of plasticizers. The use of most plasticizers usually has some negative effects on the mechanical properties of the resulting composite and can sometimes make it toxic, which makes such polymers unsuitable for biomedical applications. This research focuses on the improvement of the miscibility of polymer composites using two-step mixing with a rheomixer and a mix extruder. Polylactic acid (PLA), chitin, and starch were produced after two-step mixing, using a compression molding method with decreasing composition variation (between 8% to 2%) of chitin and increasing starch content. A dynamic mechanical analysis (DMA) was used to study the mechanical behavior of the composite at various temperatures. The tensile strength, yield, elastic modulus, impact, morphology, and compatibility properties were also studied. The DMA results showed a glass transition temperature range of 50 °C to 100 °C for all samples, with a distinct peak value for the loss modulus and factor. The single distinct peak value meant the polymer blend was compatible. The storage and loss modulus increased with an increase in blending, while the loss factor decreased, indicating excellent compatibility and miscibility of the composite components. The mechanical properties of the samples improved compared to neat PLA. Small voids and immiscibility were noticed in the scanning electron microscopy images, and this was corroborated by X-ray diffraction graphs that showed an improvement in the crystalline nature of PLA with starch. Bioabsorption and toxicity tests showed compatibility with the rat system, which is similar to the human system.

Properties and Characterization of a PLA-Chitin-Starch Biodegradable Polymer Composite

This paper presents a comparison on the effects of blending chitin and/or starch with poly(lactic acid) (PLA). Three sets of composites (PLA–chitin, PLA–starch and PLA–chitin–starch) with 92%, 94%, 96% and 98% PLA by weight were prepared. The percentage weight (wt.%) amount of the chitin and starch incorporated ranges from 2% to 8%. The mechanical, dynamic mechanical, thermal and microstructural properties were analyzed. The results from the tensile strength, yield strength, Young’s modulus, and impact showed that the PLA–chitin–starch blend has the best mechanical properties compared to PLA–chitin and PLA–starch blends. The dynamic mechanical analysis result shows a better damping property for PLA–chitin than PLA–chitin–starch and PLA–starch. On the other hand, the thermal property analysis from thermogravimetry analysis (TGA) shows no significant improvement in a specific order, but the glass transition temperature of the composite increased compared to that of neat PLA. However, the degradation process was found to start with PLA–chitin for all composites, which suggests an improvement in PLA degradation. Significantly, the morphological analysis revealed a uniform mix with an obvious blend network in the three composites. Interestingly, the network was more significant in the PLA–chitin–starch blend, which may be responsible for its significantly enhanced mechanical properties compared with PLA–chitin and PLA–starch samples.

Mechanical performance and water uptake behaviour of treated bamboo fibre-reinforced high-density polyethylene composites

High density polyethylene (HDPE) composites reinforced with short bamboo fibre (BF) were fabricated by compression moulding technique. BF were extracted from bamboo culm and treated with 0.5 M NaOH. The composites were developed by melt-compounding various weight fractions (2, 4, 6, 8 and 10 wt.%) of the treated BF with HDPE with the aid of single screw laboratory extruder at a temperature of 180–220 °C. The extrudates were thereafter moulded into various test specimens with the aid of carver laboratory press at a temperature of 230 °C and applied pressure of 0.2 kPa for 10 min. Effect of the treated BF on the mechanical properties and water uptake behaviour of the composites were studied. The results revealed that there was enhancement in the mechanical properties from 2 – 4 wt.% of BF while the water absorption rate increased with increase in the fibre weight fraction. The morphology of the composites showed that there was a homogenous dispersion of BF at lower weight fraction, although fibre agglomeration was noticed at higher weight fraction. The results of this study revealed that treated bamboo fibres are suitable for reinforcing HDPE.

5-Fluorouracil Loaded Chitosan-PVA/Na+MMT Nanocomposite Films for Drug Release and Antimicrobial Activity

In the present study, chitosan and polyvinyl alcohol (PVA) were blended with different concentrations of sodium montmorillonite (Na+MMT) clay solution by a solvent casting method. X-ray diffraction and transition electron microscope results show that the film properties are related to the co-existence of Na+MMT intercalation/exfoliation in the blend and the interaction between chitosan-PVA and Na+MMT. 5-Fluorouracil (5-FU) was loaded with chitosan-PVA/Na+MMT nanocomposite films for in vitro drug delivery study. The antimicrobial activity of the chitosan-PVA/Na+MMT films showed significant effect against Salmonella (Gram-negative) and Staphylococcus aureus (Gram-positive), whereas 5-FU encapsulated chitosan-PVA/Na+MMT bio-nanocomposite films did not show any inhibition against bacteria. Our results indicate that combination of a flexible and soft polymeric material with high drug loading ability of a hard inorganic porous material can produce improved control over degradation and drug release. It will be an economically viable method for preparation of advanced drug delivery vehicles and biodegradable implants or scaffolds.

Synthesis, characterization and the release kinetics of antiproliferative agents from polyamidoamine conjugates

Polyamidoamine conjugates containing curcumin and bisphosphonate were synthesized via a one-pot aqueous phase Michael addition reaction. In the design of the conjugate, bisphosphonate formed an integral part of the polymer carrier backbone. Curcumin was incorporated onto the polyamidoamine backbone via piperazine linker. The conjugates were characterized by Fourier transform spectroscopy, energy-dispersive X-ray analysis, atomic force spectroscopy and nuclear magnetic resonance spectroscopy and it confirmed the successful incorporation of the antiproliferative agents onto the carriers. The weight percentage incorporation of bisphosphonate to the carriers was found to be between 2.56% and 3.34%. The in vitro release studies of curcumin from the polyamidoamine conjugate were performed in dialysis bag at selected pH values. The release of curcumin was significantly slower at pH 7.4 when compared to pH 5.8. The release profiles indicate that the conjugates are more stable at pH 7.4 and are potential sustained drug-delivery systems for combination therapy.

Synthesis, characterization, and antiplasmodial activity of polymer-incorporated aminoquinolines

In this research, aminoquinoline compounds were synthesized, characterized, and incorporated into water-soluble polymers to form conjugates. The conjugates were characterized by X-ray diffraction, thermal gravimetric analysis, scanning electron microscope, Fourier transform infrared spectroscopy, and nuclear magnetic resonance spectroscopy to confirm the successful incorporation of the aminoquinoline compound on to the polymer. The synthesized conjugates were screened for in vitro antiplasmodial activity in triplet test against chloroquine-sensitive strain of Plasmodium falciparum and chloroquine drug was used as a reference drug in all the experiments. A full dose-response was performed to determine the concentration inhibiting 50% of parasite growth (IC50 value). Polymeric conjugates containing 3-diethylamino-1-propylamine solubilizing units were found to be most active against the chloroquine-sensitive strain of P. falciparum.

The creep behavior of acrylic denture base resins

The creep behavior of acrylic dental base resins, at room temperature and at different loading conditions, has been examined. The behaviors of these resins are similar to that of "commercial perspex" at room temperature over a period of 1000 seconds. The pseudo-elastic moduli of the blends of PMMA VC show a significant increase compared with PMMA alone. The addition of the PVC powder to the heat-cured acrylic resin increased the time-dependent elastic modulus. This increase in elastic modulus is advantageous in the production of denture based resins of improv mechanical properties.