Surface Treatment by Different Parameters of Erbium:Yttrium-Aluminum-Garnet (Er:YAG) Laser: Scanning Electron Microscope (SEM) Evaluation

INTRODUCTION

This study aimed to assess the Scanning Electron Microscope (SEM) analysis of tooth surface irradiated by erbium:yttrium-aluminum-garnet (Er:YAG) laser with various parameters.

METHODS

Number of 25 extracted human third molars free of caries were used in this study. The teeth were put into 5 groups for laser irradiation as follows: group 1 (power: 0.5 W, Energy: 50 mJ); group 2 (power: 1 W, Energy: 100 mJ); group 3 (power: 1.5 W, Energy: 150 mJ); group 4 (power: 2 W, Energy: 200 mJ); group 5 (power: 2.5 W, Energy: 250 mJ). All samples were prepared by repetition rate of 10 Hz and duration of 230 μs, using a non-contact handpiece at a distance of 4 mm. Then, the samples were prepared for SEM examination.

RESULTS

SEM evaluation of every 25 samples, treated by Er:YAG, showed that all groups had exposed dentinal tubules without any melted area or cracks.

CONCLUSION

In this study we used SEM to investigate ablated dentine with different parameters of Er:YAG laser energy. Our findings support these conclusions. All powers of laser below 3 W are proper for ablation, and make no cracks.

The Effect of Different Output Powers of Blue Diode Laser along with Curcumin and Riboflavin against Streptococcus mutans around Orthodontic Brackets: An In Vitro Study

OBJECTIVES

The aim of the present study was to determine the effects of antimicrobial photodynamic therapy (aPDT) using the blue diode laser (BDL) with different output powers and the photosensitizers riboflavin and curcumin on reducing the number of Streptococcus mutans around orthodontic brackets.

MATERIALS AND METHODS

A total of 36 orthodontic brackets were contaminated with S. mutans and randomly assigned to 12 groups as follows: control, riboflavin alone, riboflavin + BDL with an output power of 200, 300, 400, or 500 mW, and curcumin alone, curcumin + BDL with an output power of 200, 300, 400, or 500 mW, and 0.2% chlorhexidine (CHX-positive control). Orthodontic brackets were irradiated with a BDL (wavelength 445 nm) at a power density of 0.4-1.0 W/cm2 for 30 s. All orthodontic brackets were examined under a stereomicroscope at 10× magnification. Mean colony-forming units (CFUs)/mL were measured before and after treatment. A one-way analysis of variance with Tukey's post hoc test was performed to compare CFU/mL between groups.

RESULTS

CHX and curcumin plus BDL with an output power of 500 mW had the highest reduction in S. mutans colony numbers (p < 0.001). The curcumin groups were more effective than the riboflavin groups. Riboflavin alone and riboflavin + BDL with an output power of 200 mW showed no significant difference from the control group (p = 0.99 and 0.74, respectively).

CONCLUSION

Our results suggest that aPDT using curcumin as a photosensitizer plus BDL with an output power of 500 mW and a power density of 1.0 W/cm2 at a wavelength of 445 nm can effectively reduce colonies of S. mutans around stainless steel brackets.

Hydrogen peroxide penetration into the pulp chamber during conventional in-office bleaching and diode laser-assisted bleaching with three different wavelengths

BACKGROUND AND AIMS

Penetration of hydrogen peroxide into the pulp chamber and subsequent tooth hypersensitivity is a common concern in dental bleaching. The aim of this study was to assess the penetration of hydrogen peroxide (H2O2) into the pulp chamber in diode-laser activated bleaching with different laser wavelengths.

MATERIALS AND METHODS

Fifty extracted human maxillary anterior teeth were collected and divided into five groups(n = 10). Group 1: conventional in-office bleaching using Opalescence Boost gel. Group 2: Bleaching with Biolase Laser White 20 gel activated by 980 nm diode laser. Group 3: Bleaching with Biolase Laser White 20 gel activated by 810 nm diode laser. Group 4: Bleaching with Biolase Laser White 20 gel activated by 940 nm diode laser. Group 5: No bleaching control group.After bleaching, the solution into the pulp chamber was collected and analyzed using a spectrophotometer. The recorded data were compared with a standard sample and the results were analyzed and compared using one-way ANOVA and Tukey's HSD tests.

RESULTS

In all bleached groups, H2O2 had infiltrated into the pulp chamber. The highest level of penetration was noted in group 2 (2.32 ± 0.25 µg), while the lowest level was noted in group 3 (1.85 ± 0.33 µg). The difference in this regard was significant between groups 2 and 3 (P = 0.024), but the differences between other groups were not statistically significant (P ≥ 0.42).

CONCLUSION

Considering the results of this study, it can be stated that hydroge peroxide penetration in to pulp chamber in diode laser activation of bleaching agent according to manufactures instruction is not higher than in-office bleaching. The wavelength of diode laser had significant effect on penetration of hydrogen peroxide into pulp chamber.

Antimicrobial Efficacy of Saline, Chlorhexidine, and Zataria Multiflora and Mentha Piperita Essential Oils in Root Canal Irrigation of Primary Molars

Objectives: This study aimed to compare the antimicrobial efficacy of saline, 0.5% and 2% Zataria multiflora (Z. multiflora) essential oil, 0.5% and 2% Mentha piperita (M. piperita) essential oil, and 0.2% chlorhexidine (CHX) as root canal irrigants for primary molar teeth. Materials and Methods: A total of 64 primary molars were used in this in vitro study. The teeth were randomly assigned to six groups (N=10). The root canals were prepared up to file #35, and all teeth were sterilized before contamination with Enterococcus faecalis (E. faecalis; ATCC 29212) suspension. After 48 hours of incubation, the root canals in each group were irrigated with the respective irrigants. Sterile paper points were then used to collect microbial samples from the root canals. A colony counter was used to count the number of colony-forming units (CFUs). Data were analyzed by SPSS version 20 (alpha=0.05). Results: The colony count was significantly different among the groups (P<0.001), and 2% M. piperita (P=0.009), 0.5% Z. multiflora (P=0.021), and 0.2% CHX (P=0.002) were significantly more effective than saline in elimination of E. faecalis. The ascending order of microbial count after irrigation was as follows: saline > 0.5% M. piperita > 0.2% CHX > 2% M. piperita > 0.5% Z. multiflora. Conclusion: The current study showed the optimal antibacterial activity of 0.5% Z. multiflora essential oil and 2% M. piperita essential oil against E. faecalis, and indicated their possible efficacy for use as an irrigant for root canal irrigation of primary molars.

Scanning Electron Microscope (SEM) Evaluation of Composite Surface Irradiated by Different Powers of Er:YAG Laser

INTRODUCTION

The aim of this study was to evaluate the composite surface treated by different powers of Erbium-Doped Yttrium Aluminum Garnet (Er:YAG) laser in comparison with bur preparation via scanning electron microscope.

METHODS

Fourteen composite resin blocks with 15× 10 × 10 mm dimensions were used in this study. The samples were divided to seven groups as follow: Group 1 (power: 1 W, Energy: 50 mJ); Group 2 (power: 2 W, Energy: 100 mJ); Group 3 (power: 3W, Energy: 150 mJ); Group 4 (power: 4 W, Energy: 200 mJ); Group 5 (power: 5W, Energy: 250 mJ); Group 6 (power: 6 W, Energy: 300 mJ); Group 7: Diamond bur. Then, the samples were prepared for SEM examination.

RESULTS

The surface treated by Er:YAG laser showed irregular and micro porous surface.

CONCLUSION

It seems that composite surface treatment by Er:YAG laser can be an alternative method for composite repair if suitable parameters are used.