Optics miniaturization strategy for demanding Raman spectroscopy applications

Raman spectroscopy provides non-destructive, label-free quantitative studies of chemical compositions at the microscale as used on NASA's Perseverance rover on Mars. Such capabilities come at the cost of high requirements for instrumentation. Here we present a centimeter-scale miniaturization of a Raman spectrometer using cheap non-stabilized laser diodes, densely packed optics, and non-cooled small sensors. The performance is comparable with expensive bulky research-grade Raman systems. It has excellent sensitivity, low power consumption, perfect wavenumber, intensity calibration, and 7 cm-1 resolution within the 400-4000 cm-1 range using a built-in reference. High performance and versatility are demonstrated in use cases including quantification of methanol in beverages, in-vivo Raman measurements of human skin, fermentation monitoring, chemical Raman mapping at sub-micrometer resolution, quantitative SERS mapping of the anti-cancer drug methotrexate and in-vitro bacteria identification. We foresee that the miniaturization will allow realization of super-compact Raman spectrometers for integration in smartphones and medical devices, democratizing Raman technology.

SERS mapping combined with chemometrics, for accurate quantification of methotrexate from patient samples

Despite the technological development in Raman instrumentation that has democratized access to 2D sample scanning capabilities, most quantitative surface-enhanced Raman scattering (SERS) analyses are still performed by only acquiring a single or a few spectra per sample and performing univariate data analysis on those. This strategy can however reach its limit when analytes need to be detected and quantified in complex matrices. In that case, surface fouling and competition between the target analyte and interfering compounds can impair univariate SERS data analysis, underlining the need for a more in-depth data analysis strategy based on exploiting of full-spectrum information. In this paper, a multivariate data analysis strategy was developed, for analyzing SERS maps of methotrexate (MTX) from patient samples, including all steps from baseline correction, selection of wavelength, and the relevant pixels in the map (image threshold segmentation), as well as quantitative model construction based on partial-least squares regression. Among the different baseline correction methods evaluated, standard normal variable transformation and Savitzky-Golay smoothing proved to be more suitable, while the genetic algorithm wavelength screening method was able to screen out MTX-related SERS spectral regions more efficiently. Importantly, with the here-developed process, it was sufficient to use MTX-spiked commercial serum when building quantitative models, removing the need to work with MTX-spiked patient samples, and consequently enabling time- and resource-saving quantitative analyses. Besides, the developed multivariate data analysis approach showed superior performances compared with univariate analysis, with 30 % improved sensitivity (detection limit of 5.7 µM), 25 % higher reproducibility (average relative standard variation of 15.6 %), and 110 % better accuracy (average prediction error of -10.5 %).

Nitroaromatic explosives' detection and quantification using an attention-based transformer on surface-enhanced Raman spectroscopy maps

Rapidly and accurately detecting and quantifying the concentrations of nitroaromatic explosives is critical for public health and security. Among existing approaches, explosives' detection with Surface-Enhanced Raman Spectroscopy (SERS) has received considerable attention due to its high sensitivity. Typically, a preprocessed single spectrum that is the average of the entire or a selected subset of a SERS map is used to train various machine learning models for detection and quantification. Designing an appropriate averaging and preprocessing procedure for SERS maps across different concentrations is time-consuming and computationally costly, and the averaging of spectra may lead to the loss of crucial spectral information. We propose an attention-based vision transformer neural network for nitroaromatic explosives' detection and quantification that takes raw SERS maps as the input without any preprocessing. We produce two novel SERS datasets, 2,4-dinitrophenols (DNP) and picric acid (PA), and one benchmark SERS dataset, 4-nitrobenzenethiol (4-NBT), which have repeated measurements down to concentrations of 1 nM to illustrate the detection limit. We experimentally show that our approach outperforms or is on par with the existing methods in terms of detection and concentration prediction accuracy. With the produced attention maps, we can further identify the regions with a higher signal-to-noise ratio in the SERS maps. Based on our findings, the molecule of interest detection and concentration prediction using raw SERS maps is a promising alternative to existing approaches.

L’expérience à long terme des parents endeuillés en oncologie pédiatrique : une étude rétrospective de 2 à 18 ans après le décès d’un enfant

Objectifs : Cette étude rétrospective et transversale vise à comprendre l’expérience à long terme des parents endeuillés en oncologie pédiatrique et les différences du deuil parental en fonction du genre.

Matériel et méthodes : Un questionnaire multisectionnel coconstruit avec des cliniciens et intervenants en suivi de deuil a été tenu en ligne en 2018 et 2019. Les participants au sondage étaient des parents dont l’enfant était décédé au service d’hématologie-oncologie du CHU Sainte-Justine 2 à 18 ans auparavant. Des sections spécifiques sur les réactions, les changements et les souvenirs ont fait l’objet d’analyses descriptives.

Résultats : Les réponses de 48 parents ont été analysées. Les résultats indiquent que les mères ont tendance à modifier certaines de leurs activités sociales, alors que les pères cherchent plutôt à retrouver leurs habitudes. Les réactions initialement fortes des parents s’atténuent au fil du temps sans disparaître, en particulier la tristesse et les troubles du sommeil. Les parents ont des souvenirs apaisants des interactions et des soins reçus des intervenants en milieux clinique et communautaire même plusieurs années après le décès de leur enfant.

Conclusion : L’offre de soutien psychosocial communautaire et professionnel à long terme est pertinente, de même aux besoins des couples et aux besoins individuels des parents en fonction du genre.

Methotrexate Detection in Serum at Clinically Relevant Levels with Electrochemically Assisted SERS on a Benchtop, Custom Built Raman Spectrometer

Therapeutic drug monitoring (TDM) is an essential clinical practice for optimizing drug dosing, thereby preventing adverse effects of drugs with a narrow therapeutic window, slow clearance, or high interperson pharmacokinetic variability. Monitoring methotrexate (MTX) during high-dose MTX (HD-MTX) therapy is necessary to avoid potentially fatal side effects caused by delayed elimination. Despite the efficacy of HD-MTX treatment, its clinical application in resource-limited settings is constrained due to the relatively high cost and time of analysis with conventional analysis methods. In this work, we developed (i) an electrochemically assisted surface-enhanced Raman spectroscopy (SERS) method for detecting MTX in human serum at a clinically relevant concentration range and (ii) a benchtop, Raman detection system with an integrated potentiostat, software, and data analysis unit that enables mapping of small areas of SERS substrates and quantitative SERS-based analysis. In the assay, by promoting electrostatic attraction between gold-coated nanopillar SERS substrates and MTX molecules in aqueous samples, a detection limit of 0.13 μM with a linear range of 0.43-2 μM was achieved in PBS. The implemented sample cleanup through gel filtration proved to be highly effective, resulting in a similar detection limit (0.55 μM) and linear range (1.81-5 μM) for both PBS and serum. The developed and optimized assay could also be used on the in-house built, Raman device. We showed that MTX detection can be carried out in less than 30 min with the Raman device, paving the way toward the TDM of MTX at the point-of-need and in resource-limited environments.

Design, Development and Validation of a Knee Brace to Standardize the US Imaging Evaluation of Knee Osteoarthritis

Objective: A repeatable and reliable follow-up of knee injuries would be desirable to prevent delayed diagnosis and to monitor the efficacy of the applied treatment over time. Ultrasound (US) techniques are an attractive option to this purpose, since they are safe, low-cost and non-invasive. However, its use in the clinical practice is limited by the high dependency on the operator’s experience. Hence, the objective of this study is to provide a standardization of the US image acquisition process for knee osteoarthritis (OA) allowing an extended clinical use of US technologies in this domain. Methods: Clinical specifications were provided by expert musculoskeletal radiologists thus identifying the subject poses and the US probe positions needed to evaluate the cartilage structure, signs of synovitis and joint effusion. Such considerations were used to derive the technical requirements needed for the development of a wearable brace equipped with specific openings to guide the correct placement of the probe. The feasibility of the developed wearable brace was tested on three healthy volunteers, which were asked to acquire informative US images, similar to the reference images performed by the musculoskeletal radiologist. Results: Thanks to the knee brace, the untrained subjects were able to self-acquire informative B-mode images comparable to the corresponding images acquired by an expert clinician. Discussion/Conclusion: The use of a knee brace intended for knee OA US diagnosis demonstrated the possibility to standardize the acquisition protocol and make its application achievable also for untrained subjects, representing a key step toward tele-ultrasonography.

Development and validation of low-intensity pulsed ultrasound systems for highly controlled in vitro cell stimulation

This work aims to describe the development and validation of two low-intensity pulsed ultrasound stimulation systems able to control the dose delivered to the biological target. Transducer characterization was performed in terms of pressure field shape and intensity, for a high-frequency range (500 kHz to 5 MHz) and for a low-frequency value (38 kHz). This allowed defining the distance, on the beam axis, at which biological samples should be placed during stimulation and to exactly know the intensity at the target. Carefully designed retaining systems were developed, for hosting biological samples. Sealing tests proved their impermeability to external contaminants. The assembly/de-assembly time of the systems resulted ~3 min. Time-domain acoustic simulations allowed to precisely estimate the ultrasound beam within the biological sample chamber, thus enabling the possibility to precisely control the pressure to be transmitted to the biological target, by modulating the transducer's input voltage. Biological in vitro tests were also carried out, demonstrating the sterility of the system and the absence of toxic and inflammatory effects on growing cells after multiple immersions in water, over seven days.

Design of experiments and design space approaches in the pharmaceutical bioprocess optimization

The optimization of pharmaceutical bioprocesses suffers from several challenges like complexity, upscaling costs, regulatory approval, leading to the risk of delivering substandard drugs to patients. Bioprocess is very complex and requires the evaluation of multiple components that need to be monitored and controlled in order to attain the desired state when the process ends. Statistical design of experiments (DoE) is a powerful tool for optimizing bioprocesses because it plays a critical role in the quality by design strategy as it is useful in exploring the experimental domain and providing statistics of interest that enable scientists to understand the impact of critical process parameters on the critical quality attributes. This review summarizes selected publications in which DoE methodology was used to optimize bioprocess. The main objective of the critical review was to clearly demonstrate potential benefits of using the DoE and design space methodologies in bioprocess optimization.

Development of a prototype device for near real-time surface-enhanced Raman scattering monitoring of biological samples

With the fast growth of bioanalytical surface-enhanced Raman scattering (SERS), analytical methods have had to adapt to the complex nature of biological samples. In particular, interfering species and protein adsorption onto the SERS substrates have been addressed by sample preparation steps, such as precipitation or extraction, and by smart SERS substrate functionalisation. These additional handling steps however result in irreversible sample alteration, which in turn prevents sample monitoring over time. A new methodology, that enables near real-time, non-invasive and non-destructive SERS monitoring of biological samples, is therefore proposed. It combines solid SERS substrates, benefitting from liquid immersion resistance for extended periods of time, with an original protein filtering device and an on-field detection by means of a handheld Raman analyser. The protein removal device aims at avoiding protein surface fouling on the SERS substrate. It consists of an ultracentrifugation membrane fixed under a cell culture insert for multi-well plates. The inside of the insert is dedicated to containing biological samples. The solid SERS substrate and a simple medium, without any protein, are placed under the insert. By carefully selecting the membrane molecular weight cutoff, selective diffusion of small analytes through the device could be achieved whereas larger proteins were retained inside the insert. Non-invasive SERS spectral acquisition was then carried out through the bottom of the multi-well plate. The diffusion of a SERS probe, 2-mercaptopyridine, and of a neurotransmitter having a less intense SERS signal, serotonin, were first successfully monitored with the device. Then, the latter was applied to distinguish between subclones of cancerous cells through differences in metabolite production. This promising methodology showed a high level of versatility, together with the capability to reduce cellular stress and contamination hazards.

Raman imaging as a new analytical tool for the quality control of the monitoring of osteogenic differentiation in forming 3D bone tissue

In this study, adipose-derived stem cells (ASCs) are used to produce 3D bone grafts. The safety and the feasibility of using these bone grafts have been already showed and quality controls are already implemented. However, a cheaper, fast and non-destructive technique is required to monitor the osteogenic differentiation process. Here, the use of Raman imaging to monitor the synthesis of the extracellular matrix and its progressive mineralization occurring during the osteogenic differentiation process is investigated for the first time on a 3D in forming bone tissue. The attention was focused on Raman bands related to this matrix belonging to phosphate, phenylalanine and hydroxyproline, which are very distinctive and intense. The kinetic of the osteogenic differentiation process was first compared between a 2D and a 3D forming bone tissue. It was observed that the kinetics of the osteogenic differentiation process is slower in 3D in forming bone tissue. In a second step, an evaluation of the reliability of the Raman imaging method was performed including a study of the influence of the harvest biopsies position on the forming 3D bone tissue. The repeatability and the specificity of this method were also demonstrated. In a last step, several batches of ASCs were cultured and analyzed in 3D at different time points using Raman imaging. From the mean Raman spectra, mineral to matrix ratios (MTMR) were determined and used to evaluate the formation of mineral deposits accompanying the extracellular matrix synthesis which is indicative of an ongoing osteogenic differentiation process. These ratios peaked between the day 35 and 49. This observation was very interesting since it corresponds to the time at which the 3D bone grafts are used for the patient surgery. To conclude, Raman imaging allowed fast acquisition and time-resolved monitoring in vitro of the mineralization of extracellular matrix during osteogenic differentiation.

Effect of the functionalisation agent on the surface-enhanced Raman scattering (SERS) spectrum: Case study of pyridine derivatives

Nowadays, the use of functionalised surface-enhanced Raman scattering (SERS) substrates has become common. These surface modifying agents notably act as Raman reporters, as sensors of biological processes (pH, redox probes) or to increase the sensitivity and/or the specificity of SERS detections. However, the effects of the functionalisation agents are deeply examined in very few studies, even though they can affect the aggregation behaviour of the SERS substrate. Moreover, depending on their concentration and on the pH, their spectral signature can be modified and they can even degrade if stored inappropriately. In this context, this paper aims at emphasising the importance of the different aspects previously listed in the selection of a functionalisation agent. Pyridine derivatives were picked out to highlight these parameters, as some of these compounds are commonly used to be grafted onto SERS substrates. Two widespread syntheses of nanoparticles were selected as SERS substrates: citrate-reduced gold and silver nanoparticles. The surface of the nanoparticles was functionalised with several pyridine derivatives at different concentrations and in several solvents. It was observed that the molecules under study had a concentration-dependent effect on nanoparticle aggregation. A stability study was furthermore conducted in order to determine the best preservation conditions of the grafting solutions. In conclusion, this paper shines a light on the relevance of the investigation of the too-often neglected behaviour of the surface modifying agents. Before their application in SERS analyses, parameters such as the label concentration should therefore be included in an experimental design to optimise the sample preparation.

Evaluation of the analytical performances of two Raman handheld spectrophotometers for pharmaceutical solid dosage form quantitation

This paper addresses the issue of pharmaceutical solid dosage form quantitation using handheld Raman spectrophotometers. The two spectrophotometers used are designed with different technologies: one allows getting a more representative sampling with the Orbital Raster Scanning technology and the other one allows setting acquisition parameters. The goal was to evaluate which technology could provide the best analytical results. Several parameters were optimized to get the lowest prediction error in the end. The main objective of this study was to evaluate if this kind of instrument would be able to identify substandard medicines. For that purpose, two case-study were explored. At first, a full ICH Q2 (R1) compliant validation was performed for moderate Raman scatterer active pharmaceutical ingredient (API) in a specific formulation. It was successfully validated in the ±15% relative total error acceptance limits, with a RMSEP of 0.85% (w/w). Subsequently, it was interesting to evaluate the influence of excipients when the API is a high Raman scatterer. For that purpose, a multi-formulation model was developed and successfully validated with a RMSEP of 2.98% (w/w) in the best case. These two studies showed that thanks to the optimization of acquisition parameters, Raman handheld spectrophotometers methods were validated for two different case-study and could be applied to identify substandard medicines.

P4592Total arterial revascularization in severe coronary artery disease: a 25-years single-center experience

Objective

To evaluate very long-term survival of Total Arterial Revascularization (TAR) in patients with severe coronary artery disease (CAD) undergoing Coronary Artery Bypass Grafting (CABG).

Methods

Between January 1992 and December 2017, 13798 patients aged 70 years or less underwent primary isolated CABG with at least two grafts in our department. Patients receiving TAR were matched by propensity-score analysis to the rest of the population. All pre- and peri-operative data were collected prospectively in our institutional database. Long-term survival was assessed using provincial vital statistics data. The primary outcome was very-long time survival, secondary outcomes were operative mortality and early complications.

Results

Propensity-score matching identified 602 pairs with similar preoperative characteristics. In the matched control group, 65.4% and 30.9% of patients received 1 and 2 arterial grafts, respectively, whereas 3 or more arterial grafts were used in 3.6%. Less distal anastomoses (2.57±0.77 vs 3.39±0.97, p<0.0001) were performed in TAR patients, who therefore had a shorter cross-clamping time (44.2±14.7 vs 52.9±19.6, p<0.0001). Operative mortality was similar (0.5% vs 1.0%, p=0.51) and there was no difference in the rate of mediastinitis (2.5% vs 0.8%, p=0.28)for the TAR and matched control groups, respectively. TAR patients were less likely to receive blood transfusions (34.9% vs 40.7%, p=0.04). The average follow-up was 13.4±6.7 years. Cox-adjusted survival was significantly better in patients receiving TAR compared to the matched population, up to 25 years postoperatively (HR 0.87 [0.86–0.88], p<0.0001, Figure 1).

Figure 1

Conclusion

Total arterial revascularization is not associated with increased perioperative risk of complications and provides long-term survival benefits up to 25 years postoperatively.

Quantitation of active pharmaceutical ingredient through the packaging using Raman handheld spectrophotometers: A comparison study

Handheld Raman spectroscopy is actually booming. Recent devices improvements aim at addressing the usual Raman spectroscopy issues: fluorescence with shifted-excitation Raman difference spectroscopy (SERDS), poor sensitivity with surface enhanced Raman scattering (SERS) and information only about the sample surface with spatially offset Raman spectroscopy (SORS). While qualitative performances of handheld devices are generally well established, the quantitative analysis of pharmaceutical samples remains challenging. The aim of this study was to compare the quantitative performances of three commercially available handheld Raman spectroscopy devices. Two of them (TruScan and IDRaman mini) are equipped with a 785 nm laser wavelength and operate in a conventional backscattering mode. The IDRaman has the Orbital Raster Scanning (ORS) option to increase the analyzed surface. The third device (Resolve) operates with an 830 nm laser wavelength both in backscattering and in SORS modes. The comparative study was carried out on ibuprofen-mannitol-microcrystalline cellulose ternary mixtures. The concentration of ibuprofen ranged from 24 to 52% (w/w) while the proportions of the two excipients were varied to avoid cross-correlation as much as possible. Analyses were performed either directly through a glass vial or with the glass vial in an opaque polypropylene flask, using a validated FT-NIR spectroscopy method as a reference method. Chemometric analyses were carried out with the Partial Least Squares Regression (PLS-R) algorithm. The quantitative models were validated using the total error approach and the ICH Q2 (R1) guidelines with ± 15% as acceptance limits.

Ultrasound Acoustic Radiation Force Impulse imaging for High Intensity Focused Ultrasound focal spot localization

Focal spot precise localization highly contributes to the accuracy and safety of High Intensity Focused Ultrasound (HIFU) therapies, and it is usually performed by means of Magnetic Resonance-Acoustic Radiation Force Impulse imaging (MR-ARFI). Acoustic Radiation Force Impulse imaging using ultrasound (US-ARFI) is herein proposed as a valid alternative to MR-ARFI for an accurate and non-destructive detection of the focal spot position during the pre-treatment phase. To this aim, a system composed of a HIFU transducer for generating the acoustic radiation force and a 2D confocal ultrasound probe for measuring the induced micro-displacement have been used. Then, an algorithm based on the Normalized Cross Correlation was implemented for the creation of a displacement map in which the highest displacement area, corresponding to the focal spot region, is unequivocally visualized. The feasibility of the proposed USARFI method for HIFU focal spot localization was successfully demonstrated in a tissue mimicking phantom model.

Platelet Functions in Relation to Dietary Fats in Farmers from two Regions of France

To determine whether the long-term feeding of dietary fats affect platelet functions in man, platelet aggregation (to thrombin ADP, collagen, epinephrine) and clotting activity of platelet-rich plasma (PRP), platelet-poor plasma and of washed platelets, were studied in a mobile-laboratory in 44 healthy male farmers (40-45 years) from two French regions Var and Moselle, in relation to lipemia, glycemia, dietary nutriments, and platelet phospholipid composition. In the Moselle subjects, the platelet clotting activity of PRP and of washed platelets, the platelet aggregation to thrombin and ADP, were highly significantly (p <0.001) increased as compared to those of Var, but not the plasma cholesterol, which was identical in the two regions.

In Moselle, the intake of total calories, total lipids and saturated fats was higher than in the Var.

However, it was only with the saturated fat intake (mostly stearic acid) that the platelet clotting activity (p <0.01) and the platelet aggregation (p <0.001) were highly significantly correlated. The platelet clotting activity was also significantly (p <0.001) correlated with the fatty acid composition of the platelet phospholipid fractions phosphatidyl serine + phosphatidyl inositol.

Towards a spray-coating method for the detection of low-dose compounds in pharmaceutical tablets using surface-enhanced Raman chemical imaging (SER-CI)

Surface-enhanced Raman chemical imaging (SER-CI) is a highly sensitive analytical tool recently used in the pharmaceutical field owing to the possibility to obtain high sensitivity along with spatial information. However, the covering method of the pharmaceutical samples such as tablets with metallic nanoparticles is a major issue for SER-CI analyses due to the difficulty to obtain a homogeneous covering of tablet surface with the SERS substrates. In this context, a spray-coating method was proposed in order to fully exploit the potential of SER-CI. A homemade apparatus has been developed from an electrospray ionization (ESI) probe in order to cover the pharmaceutical tablets with the colloidal suspension in a homogeneous way. The silver substrate was pulled through the airbrush by a syringe pump which was then nebulized into small droplets due to the contact of the solution with the gas flow turbulence. A robust optimization of the process was carried out by adjusting experimental parameters such as the liquid flow rate and the spraying time. Besides, the performances of this spraying technique were compared with two others covering methods found in the literature which are drop casting and absorption coating. A homogeneity study, conducted by SER-CI and matrix assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) applied to the different covering techniques was performed. The influence of the metallic nanoparticles deposit on soluble compounds was also investigated in order to highlight the advantages of using this new spray coating approach.

Development of a SERS strategy to overcome the nanoparticle stabilisation effect in serum-containing samples: Application to the quantification of dopamine in the culture medium of PC-12 cells

The analysis of serum samples by surface-enhanced Raman spectroscopy (SERS) has gained ground over the last few years. However, the stabilisation of colloids by the proteins contained in these samples has restricted their use in common practice, unless antibodies or aptamers are used. Therefore, this work was dedicated to the development of a SERS methodology allowing the analysis of serum samples in a simple and easy-to-implement way. This approach was based on the pre-aggregation of the colloid with a salt solution. Gold nanoparticles (AuNPs) were used as the SERS substrate and, owing to its physiopathological importance, dopamine was chosen as a model to implement the SERS approach. The presence of this neurotransmitter could be determined in the concentration range 0.5-50 ppm (2.64-264 µM) in the culture medium of PC-12 cells, with a R² of 0.9874, and at even lower concentrations (0.25 ppm, 1.32 µM) in another matrix containing fewer proteins. Moreover, the effect of calcium and potassium on the dopamine exocytosis from PC-12 cells was studied. Calcium was shown to have a predominant and dose-dependant effect. Finally, PC-12 cells were exposed to dexamethasone in order to increase their biosynthesis and release of dopamine. This increase was monitored with the developed SERS approach.

Free energy profiles for two ubiquitous damaging agents: methylation and hydroxylation of guanine in B-DNA

DNA methylation and hydroxylation are two ubiquitous reactions in DNA damage induction, yet insights are scarce concerning the free energy of activation within B-DNA. We resort to multiscale simulations to investigate the attack of a hydroxyl radical and of the primary diazonium onto a guanine embedded in a solvated dodecamer. Reaction free energy profiles characterize two strongly exergonic processes, yet allow unprecedented quantification of the barrier towards this damage reaction, not higher than 6 kcal mol^-1 and sometimes inexistent, and of the exergonicities. In the case of the [G(C8)-OH]˙ intermediate, we challenge the functional dependence of such simulations: recently-proposed functionals, such as M06-2X and LC-BLYP, agree on a ∼4 kcal mol^-1 barrier, whereas the hybrid GGA B3LYP functional predicts a barrier-less pathway. In the long term, multiscale approaches can help build up a unified panorama of DNA lesion induction. These results stress the importance of DFT/MM-MD simulations involving new functionals towards the sound modelling of biomolecule damage even in the ground state.

Global approach for the validation of an in-line Raman spectroscopic method to determine the API content in real-time during a hot-melt extrusion process

Since the Food and Drug Administration (FDA) published a guidance based on the Process Analytical Technology (PAT) approach, real-time analyses during manufacturing processes are in real expansion. In this study, in-line Raman spectroscopic analyses were performed during a Hot-Melt Extrusion (HME) process to determine the Active Pharmaceutical Ingredient (API) content in real-time. The method was validated based on a univariate and a multivariate approach and the analytical performances of the obtained models were compared. Moreover, on one hand, in-line data were correlated with the real API concentration present in the sample quantified by a previously validated off-line confocal Raman microspectroscopic method. On the other hand, in-line data were also treated in function of the concentration based on the weighing of the components in the prepared mixture. The importance of developing quantitative methods based on the use of a reference method was thus highlighted. The method was validated according to the total error approach fixing the acceptance limits at ±15% and the α risk at ±5%. This method reaches the requirements of the European Pharmacopeia norms for the uniformity of content of single-dose preparations. The validation proves that future results will be in the acceptance limits with a previously defined probability. Finally, the in-line validated method was compared with the off-line one to demonstrate its ability to be used in routine analyses.

Urbanization impact on sulfur content of groundwater revealed by the study of urban speleothem-like deposits: Case study in Paris, France

Speleothem-like deposits that develop underground in urban areas are an archive of the environmental impact of anthropic activities that has been little studied so far. In this paper, the sulfate content in shallow groundwater from northern Paris (France) is compared with the sulfur content in two 300-year-old urban carbonate deposits that grew in a historical underground aqueduct. The present-day waters of the aqueduct have very high sulfur and calcium contents, suggesting pollution from gypsum dissolution. However, geological gypsum levels are located below the water table. Sulfur content was measured by micro-X-ray fluorescence in these very S-rich carbonate deposits (0.5 to 1% of S). A twofold S increase during the second half of the 1800s was found in both samples. These dates correspond to two major periods of urbanization above the site. We discus three possible S sources: anthropic sources (industries, fertilizers…), volcanic eruptions and input within the water through gypsum brought for urbanization above the studied site (backfill with quarry waste) since the middle of the 19th century. For the younger second half of the studied section, S input from gypsum brought during urbanization was confirmed by the study of isotopic sulfur composition (δ³⁴S=+15.2‰ at the top). For the oldest part, several sulfur peaks could be related to early industrial activity in Paris, that caused high local air pollution, as reported in historical archives but also to historical gypsum extraction. This study provides information on the origin and timing of the very high SO₄^2- levels measured nowadays within the shallow groundwater, thus demonstrating the interest in using carbonate deposits in urban areas as a proxy for the history of urbanization or human activities and their impact on water bodies.

Monitoring of anatabine release by methyl jasmonate elicited BY-2 cells using surface-enhanced Raman scattering

A new application of surface-enhanced Raman scattering (SERS) in the field of plant material analysis is proposed in this study. The aim was to monitor the release of anatabine by methyl jasmonate (MeJa) elicited Bright Yellow-2 (BY-2) cells. Gold nanoparticles (AuNps) were used as SERS substrate. The first step was to study the SERS activity of anatabine in a complex matrix comprising the culture medium and BY-2 cells. The second step was the calibration. This one was successfully performed directly in the culture medium in order to take into account the matrix effect, by spiking the medium with different concentrations of anatabine, leading to solutions ranging from 250 to 5000µgL(-1). A univariate analysis was performed, the intensity of a band situated at 1028cm(-1), related to anatabine, was plotted against the anatabine concentration. A linear relationship was observed with a R(2) of 0.9951. During the monitoring study, after the MeJa elicitation, samples were collected from the culture medium containing BY-2 cells at 0, 24h, 48h, 72h and 96h and were analysed using SERS. Finally, the amount of anatabine released in the culture medium was determined using the response function, reaching a plateau after 72h of 82µg of anatabine released/g of fresh weight (FW) MeJa elicited BY-2 cells.

Fixed 50:50 mixture of nitrous oxide and oxygen to reduce lumbar-puncture-induced pain: a randomized controlled trial

BACKGROUND AND PURPOSE

Lumbar puncture (LP) has been frequently performed for more than a century. This procedure is still stressful and often painful. The aim of the study was to evaluate the efficacy of a fixed 50% nitrous oxide-oxygen mixture compared to placebo to reduce immediate procedural pain and anxiety during LP.

METHODS

A randomized controlled trial was conducted involving adults who needed a cerebrospinal fluid analysis. Patients were randomly assigned to inhale either a fixed 50% nitrous oxide-oxygen mixture (50% N₂ O-O₂ ) or medical air (22% O₂ -78% N₂ ). Cutaneous application of a eutectic mixture of local anaesthetics was systematically done and all LPs were performed with pencil point 25G needles (20G introducer needle). The primary end-point was the maximal pain level felt by the patient during the procedure, the maximal anxiety level being a secondary outcome, both measured using a numerical rating scale (0-10).

RESULTS

A total of 66 consecutive patients were randomized. The analysis was intention to treat. The maximal pain was 4.9 ± 2.7 for the 33 patients receiving air and 2.7 ± 2.7 for the 33 receiving 50% N₂ O-O₂ (P = 0.002). Similarly, the maximal LP-induced anxiety was 4.5 ± 3.1 vs. 2.6 ± 2.6 (P = 0.009), respectively. The number needed to treat to avoid one patient undergoing significant pain (pain score ≥ 4/10) was 2.75. Body mass index >25 kg/m² was significantly associated with higher pain intensity (P = 0.03). No serious adverse events were attributable to 50% N₂ O-O₂ inhalation.

CONCLUSIONS

Inhalation of a fixed 50% N₂ O-O₂ mixture is efficient to reduce LP-induced pain and anxiety.

A simple calibration approach based on film-casting for confocal Raman microscopy to support the development of a hot-melt extrusion process

When developing a new formulation, the development, calibration and validation steps of analytical methods based on vibrational spectroscopy are time-consuming. For each new formulation, real samples must be produced and a "reference method" must be used in order to determine the Active Pharmaceutical Ingredient (API) content of each sample. To circumvent this issue, the paper presents a simple approach based on the film-casting technique used as a calibration tool in the framework of hot-melt extrusion process. Confocal Raman microscopic method was successfully validated for the determination of itraconazole content in film-casting samples. Then, hot-melt extrusion was carried out to produce real samples in order to confront the results obtained with confocal Raman microscopy and Ultra High Performance Liquid Chromatography (UHPLC). The agreement between both methods was demonstrated using a comparison study based on the Bland and Altman's plot.

NH₃ biofiltration of piggery air

An aboveground pilot-scale biofilter filled with wood chips was tested to treat ammonia emissions from a piggery located in Brittany (France). Two long-term tests ("summer" and "autumn" experiments) were carried out to improve biofilter applications for agriculture. The influence of climatic conditions on biofilter performance was taken into account. During summer 2012, the biofilter was operated for 74 days at different empty bed residence times (EBRTs) from 6 to 15 s. Inlet NH3 concentrations were relatively constant (around 15 mg m(-3)). Significant NH3 reductions were achieved at EBRT = 12 s (removal efficiencies, RE, ranged between 90 and 100% for loading rates, LR, of around 4 g m(-3) h(-1)). At a lower EBRT (6 s), RE dropped to roughly 30-50%. This was due to the dramatic increase in the loading rate (LR up to 12 g m(-3) h(-1)) but the results showed that the change in atmospheric conditions (temperature and relative humidity) also had a significant influence on biofilter performance. It was evidenced that the use of a humidifier upstream of the biofilter must be taken into account for large-scale biofilter design, but only for specific conditions (the spraying of the biofilter having to be carried out exceptionally). During autumn 2012, the biofilter was operated for 116 days at EBRT = 12 s. RE were around 80% for LR of around 3 g m(-3) h(-1). In such autumnal atmospheric conditions, a demister system should be installed upstream of the biofilter in order to avoid water accumulation in the bed material. Although biofiltration was suitable for NH3 treatment of piggery air, the need to control accurately the medium moisture content implies that biofilters would not be easily managed by a pig farmer.

Role of balloon postdilation following trancatheter aortic valve implantation

Paravalvular aortic regurgitation (AR) is a frequent complication following transcatheter aortic valve implantation (TAVI) with an incidence of mild to moderate AR almost systematically higher than 30%. Moreover, several studies have shown that AR has a negative impact on short and mid-term mortality. Balloon postdilation has been proposed as an initial periprocedural option for patients with paravalvular AR to obtain a better expansion of the stent valve frame and potentially reduce the severity of the leak. The aim of this review is to discuss the current available literature on balloon postdilation as a treatment of paravalvular AR after TAVI, its impact on clinical events and future perspectives.

Design and characterization of a laterally mounted phased-array transducer breast-specific MRgHIFU device with integrated 11-channel receiver array

PURPOSE

This work presents the design and preliminary evaluation of a new laterally mounted phased-array MRI-guided high-intensity focused ultrasound (MRgHIFU) system with an integrated 11-channel phased-array radio frequency (RF) coil intended for breast cancer treatment. The design goals for the system included the ability to treat the majority of tumor locations, to increase the MR image's signal-to-noise ratio (SNR) throughout the treatment volume and to provide adequate comfort for the patient.

METHODS

In order to treat the majority of the breast volume, the device was designed such that the treated breast is suspended in a 17-cm diameter treatment cylinder. A laterally shooting 1-MHz, 256-element phased-array ultrasound transducer with flexible positioning is mounted outside the treatment cylinder. This configuration achieves a reduced water volume to minimize RF coil loading effects, to position the coils closer to the breast for increased signal sensitivity, and to reduce the MR image noise associated with using water as the coupling fluid. This design uses an 11-channel phased-array RF coil that is placed on the outer surface of the cylinder surrounding the breast. Mechanical positioning of the transducer and electronic steering of the focal spot enable placement of the ultrasound focus at arbitrary locations throughout the suspended breast. The treatment platform allows the patient to lie prone in a face-down position. The system was tested for comfort with 18 normal volunteers and SNR capabilities in one normal volunteer and for heating accuracy and stability in homogeneous phantom and inhomogeneous ex vivo porcine tissue.

RESULTS

There was a 61% increase in mean relative SNR achieved in a homogeneous phantom using the 11-channel RF coil when compared to using only a single-loop coil around the chest wall. The repeatability of the system's energy delivery in a single location was excellent, with less than 3% variability between repeated temperature measurements at the same location. The execution of a continuously sonicated, predefined 48-point, 8-min trajectory path resulted in an ablation volume of 8.17 cm(3), with one standard deviation of 0.35 cm(3) between inhomogeneous ex vivo tissue samples. Comfort testing resulted in negligible side effects for all volunteers.

CONCLUSIONS

The initial results suggest that this new device will potentially be suitable for MRgHIFU treatment in a wide range of breast sizes and tumor locations.