Introduction to fundamental processes in optical nanomaterials

An introduction to the joint Nanoscale and Chemical Communications (ChemComm) themed collection focused on fundamental processes in optical nanomaterials that features a series of articles describing the properties of this versatile class of materials while highlighting some of their potential applications.

Confining single Er3+ ions in sub-3 nm NaYF4 nanoparticles to induce slow relaxation of the magnetisation

Molecular systems known as single-molecule magnets (SMMs) exhibit magnet-like behaviour of slow relaxation of the magnetisation and magnetic hysteresis and have potential application in high-density memory storage or quantum computing. Often, their intrinsic magnetic properties are plagued by low-energy molecular vibrations that lead to phonon-induced relaxation processes, however, there is no straightforward synthetic approach for molecular systems that would lead to a small amount of low-energy vibrations and low phonon density of states at the spin-resonance energies. In this work, we apply knowledge accumulated over the last decade in molecular magnetism to nanoparticles, incorporating Er3+ ions in an ultrasmall sub-3 nm diamagnetic NaYF4 nanoparticle (NP) and probing the slow relaxation dynamics intrinsic to the Er3+ ion. Furthermore, by increasing the doping concentration, we also investigate the role of intraparticle interactions within the NP. The knowledge gained from this study is anticipated to enable better design of magnetically high-performance molecular and bulk magnets for a wide variety of applications, such as molecular electronics.

Lanthanide-based nanomaterials for temperature sensing in the near-infrared spectral region: illuminating progress and challenges

Being first proposed as a method to overcome limitations associated with conventional contact thermometers, luminescence thermometry has been extensively studied over the past two decades as a sensitive and fast approach to remote and minimally invasive thermal sensing. Herein, lanthanide (Ln)-doped nanoparticles (Ln-NPs) have been identified as particularly promising candidates, given their outstanding optical properties. Known primarily for their upconversion emission, Ln-NPs have also been recognized for their ability to be excited with and emit in the near-infrared (NIR) regions matching the NIR transparency windows. This sparked the emergence of the development of NIR-NIR Ln-NPs for a wide range of temperature-sensing applications. The shift to longer excitation and emission wavelengths resulted in increased efforts being put into developing nanothermometers for biomedical applications, however most research is still preclinical. This mini-review outlines and addresses the challenges that limit the reliability and implementation of luminescent nanothermometers to real-life applications. Through a critical look into the recent developments from the past 4 years, we highlight attempts to overcome some of the limitations associated with excitation wavelength, thermal sensitivity, calibration, as well as light-matter interactions. Strategies range from use of longer excitation wavelengths, brighter emitters through strategic core/multi-shell architectures, exploitation of host phonons, and a shift from double- to single-band ratiometric as well as lifetime-based approaches to innovative methods based on computation and machine learning. To conclude, we offer a perspective on remaining gaps and where efforts should be focused towards more robust nanothermometers allowing a shift to real-life, e.g., in vivo, applications.

Core-multi-shell design: unlocking multimodal capabilities in lanthanide-based nanoparticles as upconverting, T2-weighted MRI and CT probes

Multimodal bioimaging probes merging optical imaging, magnetic resonance imaging (MRI), and X-ray computed tomography (CT) capabilities have attracted considerable attention due to their potential biomedical applications. Lanthanide-based nanoparticles are promising candidates for multimodal imaging because of their optical, magnetic and X-ray attenuation properties. We prepared a set of hexagonal-phase (β)-NaGdF4:Yb,Er/NaGdF4/NaDyF4 core/shell/shell nanoparticles (Dy-CSS NPs) and demonstrated their optical/T2-weighted MRI/CT multimodal capabilities. A known drawback of multimodal probes that merge the upconverting Er3+/Yb3+ ion pair with magnetic Dy3+ ions for T2-weighted MRI is the loss of upconversion (UC) emission due to Dy3+ poisoning. Particular attention was paid to controlled nanoparticle architectures with tuned inner shell thicknesses separating Dy3+ and Er3+/Yb3+ to shed light on the distance-dependent loss of UC due to Yb3+ → Dy3+ energy transfer. Based on the Er3+ UC spectra and the excited state lifetime of Yb3+, a 4 nm thick NaGdF4 inner shell did not only restore but enhanced the UC emission. We further investigated the effect of the outer NaDyF4 shell thickness on the particles' magnetic and CT performance. MRI T2 relaxivity measurements in vitro at a magnetic field of 7 T performed on citrate-capped Dy-CSS NPs revealed that NPs with the thickest outer shell thickness (4 nm) exhibited the highest r2 value, with a superior T2 contrast effect compared to commercial iron oxide and other Dy-based T2 contrast agents. In addition, the citrate-capped Dy-CSS NPs were demonstrated suitable for CT in in vitro imaging phantoms at X-ray energies of 110 keV, rendering them interesting alternatives to clinically used iodine-based agents that operate at lower energies.

Entrapped Molecule-Like Europium-Oxide Clusters in Zinc Oxide with Nearly Unaffected Host Structure

Nanocrystalline ZnO sponges doped with 5 mol% EuO_1.5 are obtained by heating metal-salt complex based precursor pastes at 200-900 °C for 3 min. X-ray diffraction, transmission electron microscopy, and extended X-ray absorption fine structure (EXAFS) show that phase separation into ZnO:Eu and c-Eu₂ O₃ takes place upon heating at 700 °C or higher. The unit cell of the clean oxide made at 600 °C shows only ≈0.4% volume increase versus undoped ZnO, and EXAFS shows a ZnO local structure that is little affected by the Eu-doping and an average Eu³⁺ ion coordination number of ≈5.2. Comparisons of 23 density functional theory-generated structures having differently sized Eu-oxide clusters embedded in ZnO identify three structures with four or eight Eu atoms as the most energetically favorable. These clusters exhibit the smallest volume increase compared to undoped ZnO and Eu coordination numbers of 5.2-5.5, all in excellent agreement with experimental data. ZnO defect states are crucial for efficient Eu³⁺ excitation, while c-Eu₂ O₃ phase separation results in loss of the characteristic Eu³⁺ photoluminescence. The formation of molecule-like Eu-oxide clusters, entrapped in ZnO, proposed here, may help in understanding the nature of the unexpected high doping levels of lanthanide ions in ZnO that occur virtually without significant change in ZnO unit cell dimensions.

Phytoglycogen Encapsulation of Lanthanide-Based Nanoparticles as an Optical Imaging Platform with Therapeutic Potential

Lanthanide-based upconverting nanoparticles (UCNPs) are largely sought-after for biomedical applications ranging from bioimaging to therapy. A straightforward strategy is proposed here using the naturally sourced polymer phytoglycogen to coencapsulate UCNPs with hydrophobic photosensitizers as an optical imaging platform and light-induced therapeutic agents. The resulting multifunctional sub-micrometer-sized luminescent beads are shown to be cytocompatible as carrier materials, which encourages the assessment of their potential in biomedical applications. The loading of UCNPs of various elemental compositions enables multicolor hyperspectral imaging of the UCNP-loaded beads, endowing these materials with the potential to serve as luminescent tags for multiplexed imaging or simultaneous detection of different moieties under near-infrared (NIR) excitation. Coencapsulation of UCNPs and Rose Bengal opens the door for potential application of these microcarriers for collagen crosslinking. Alternatively, coloading UCNPs with Chlorin e6 enables NIR-light triggered generation of reactive oxygen species. Overall, the developed encapsulation methodology offers a straightforward and noncytotoxic strategy yielding water-dispersible UCNPs while preserving their bright and color-tunable upconversion emission that would allow them to fulfill their potential as multifunctional platforms for biomedical applications.

Metabolic Consequences of Developmental Exposure to Polystyrene Nanoplastics, the Flame Retardant BDE-47 and Their Combination in Zebrafish

Single-use plastic production is higher now than ever before. Much of this plastic is released into aquatic environments, where it is eventually weathered into smaller nanoscale plastics. In addition to potential direct biological effects, nanoplastics may also modulate the biological effects of hydrophobic persistent organic legacy contaminants (POPs) that absorb to their surfaces. In this study, we test the hypothesis that developmental exposure (0–7 dpf) of zebrafish to the emerging contaminant polystyrene (PS) nanoplastics (⌀100 nm; 2.5 or 25 ppb), or to environmental levels of the legacy contaminant and flame retardant 2,2′,4,4′-Tetrabromodiphenyl ether (BDE-47; 10 ppt), disrupt organismal energy metabolism. We also test the hypothesis that co-exposure leads to increased metabolic disruption. The uptake of nanoplastics in developing zebrafish was validated using fluorescence microscopy. To address metabolic consequences at the organismal and molecular level, metabolic phenotyping assays and metabolic gene expression analysis were used. Both PS and BDE-47 affected organismal metabolism alone and in combination. Individually, PS and BDE-47 exposure increased feeding and oxygen consumption rates. PS exposure also elicited complex effects on locomotor behaviour with increased long-distance and decreased short-distance movements. Co-exposure of PS and BDE-47 significantly increased feeding and oxygen consumption rates compared to control and individual compounds alone, suggesting additive or synergistic effects on energy balance, which was further supported by reduced neutral lipid reserves. Conversely, molecular gene expression data pointed to a negative interaction, as co-exposure of high PS generally abolished the induction of gene expression in response to BDE-47. Our results demonstrate that co-exposure to emerging nanoplastic contaminants and legacy contaminants results in cumulative metabolic disruption in early development in a fish model relevant to eco- and human toxicology.

Trends in hyperspectral imaging: from environmental and health sensing to structure-property and nano-bio interaction studies

Hyperspectral imaging (HSI) is a technique that allows for the simultaneous acquisition of both spatial and spectral information. While HSI has been known for years in the field of remote sensing, for instance in geology, cultural heritage, or food industries, it recently emerged in the fields of nano- and micromaterials as well as bioimaging and -sensing. Herein, the attractiveness of HSI arises from the suitability for generating knowledge about environment-specific optical properties, such as photoluminescence of optical probes in a biological sample or at a single-crystal/particle level, to be leveraged into better understanding of structure-property relationships and nano-bio interactions, respectively. Moreover, given its excellent spectral resolution, HSI is highly suitable for optical multiplexing in multiple dimensions, as sought after for, e.g., high throughput biological imaging by simultaneous tracking of multiple targets. Overall, HSI is an emerging technique that has the potential to transform analytical approaches from biomedicine to advanced materials research. This Trends Article provides insight into the potential of HSI, highlighting selected examples from well-established fields including environmental monitoring and food quality control to set the stage for the discussion of emerging opportunities at the micro- and nanoscale. Herein, special focus is set on photoluminescent micro- and nanoprobes for health and spectral conversion applications.

Cubic versus hexagonal - phase, size and morphology effects on the photoluminescence quantum yield of NaGdF4:Er3+/Yb3+ upconverting nanoparticles

Upconverting nanoparticles (UCNPs) are well-known for their capacity to convert near-infrared light into UV/visible light, benefitting various applications where light triggering is required. At the nanoscale, loss of luminescence intensity is observed and thus, a decrease in photoluminescence quantum yield (PLQY), usually ascribed to surface quenching. We evaluate this by measuring the PLQY of NaGdF₄:Er³⁺,Yb³⁺ UCNPs as a function of size (ca. 15 to 100 nm) and shape (spheres, cubes, hexagons). Our results show that the PLQY of α-phase NaGdF₄ Er³⁺,Yb³⁺ surpasses that of β-NaGdF₄ for sizes below 20 nm, an observation related to distortion of the crystal lattice when the UCNPs become smaller. The present study also underlines that particle shape must not be neglected as a relevant parameter for PLQY. In fact, based on a mathematical nucleus/hull volumetric model, shape was found to be particularly relevant in the 20 to 60 nm size range of the investigated UCNPs.

Microwave-assisted synthesis of NaMnF3 particles with tuneable morphologies

Here, the synthesis of sub-micron MMnF₃ (M = Na or K) particles by a rapid microwave-assisted approach is reported. Adjustment of the Na⁺-to-Mn²⁺ ratio in the reaction mixture yielded tuneable morphologies, i.e., rods, ribbons, and plates. Relaxometric results indicated that poly(acrylic acid)-capped MMnF₃ particles exhibited characteristic magnetic properties, which endows them with potential T₁-weighted contrast agent capabilities.

Water dispersible ligand-free rare earth fluoride nanoparticles: water transfer versus NaREF4-to-REF3 phase transformation

The chemical stability of oleate-capped sub-10 nm α- and β-NaREF4 NPs (RE = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Lu for α- and RE = Pr, Nd, Sm, Eu, Gd, Tb, Dy for β-phase NPs) was evaluated under the acidic conditions used for ligand removal towards water dispersibility. It was found that for such small NPs, a pH lower than 3 was necessary for the water transfer to be efficient and to yield well-dispersed ligand-free NPs. In stark contrast to the generally considered good chemical stability of NaREF4, these conditions were observed to pose a risk to phase transformation of the NaREF4 NPs into much larger, hexagonal- or orthorhombic-phase REF3, depending on the NP composition. A correlation between the thermodynamic stability of the α/β-NaREF4 and the hexagonal/orthorhombic REF3 phases - dictated by the RE ion choice - and the chemical stability of the NPs was found. For instance, β-NaGdF4 NPs remained stable, while α-NaGdF4 NPs underwent phase transformation into hexagonal GdF3. More general, NaREF4 NPs based on lighter RE ions were more prone towards phase transformation, while those based on heavier RE ions exhibited stability. Herein, within the RE series, the borderline for phase transformation was identified as Tb/Dy for α-NaREF4 NPs and Sm/Eu for β-NaREF4 NPs, respectively. Also, given the large interest in luminescent NPs for, e.g. biomedical applications, optically active Ln3+ ions (Ln = Nd, Eu, Tb, Er/Yb) were doped into α/β-NaGdF4 host NPs, and the dopant influence on the chemical stability was evaluated. Steady state and time-resolved spectroscopy unveiled spectral features characteristic for Ln3+ f-f transitions, i.e. downshifting and upconversion, before and after ligand removal. Overall, the results herein described emphasise the importance of minding the chemical procedure used for ligand removal of NaREF4 NPs of different crystalline phases and RE compositions.

Effect of light scattering on upconversion photoluminescence quantum yield in microscale-to-nanoscale materials

Scattering affects excitation power density, penetration depth and upconversion emission self-absorption, resulting in particle size -dependent modifications of the external photoluminescence quantum yield (ePLQY) and net emission. Micron-size NaYF₄:Yb³⁺, Er³⁺ encapsulated phosphors (∼4.2 µm) showed ePLQY enhancements of >402%, with particle-media refractive index disparity (Δn): 0.4969, and net emission increases of >70%. In sub-micron phosphor encapsulants (∼406 nm), self-absorption limited ePLQY and emission as particle concentration increases, while appearing negligible in nanoparticle dispersions (∼31.8 nm). These dependencies are important for standardising PLQY measurements and optimising UC devices, since the encapsulant can drastically enhance UC emission.

Fast, Low-Cost Synthesis of ZnO:Eu Nanosponges and the Nature of Ln Doping in ZnO

A low-cost template-free solution chemical route to highly porous nanocrystalline sponges of ZnO-EuO_1.5 with 0-5 mol % Eu is presented. The process uses Zn- and Eu-acetate-nitrate and triethanolamine as precursors in methanol. After evaporation of the solvent and heating at 200 °C for 3 min, crystalline ZnO:Eu sponges with minor amounts of organic residues were obtained. Heating to 400 °C replaced the organics with carbonate, which in its turn was decomposed at temperatures below 600 °C, forming ZnO:Eu sponges. Samples heated to 200-1000 °C for 3 min were studied with XRD, SEM, TEM, TG, XPS, and IR spectroscopy. The ZnO:Eu crystallite sizes could be tuned from below 10 nm for sponges prepared at 200-500 °C, to over 100 nm range at 900 °C, without sintering of the overall microstructure. XRD showed the presence of hexagonal ZnO:Eu (or at 700-1000 °C, ZnO:Eu and cubic Eu₂O₃) as the only phases present. The ZnO:Eu had slightly larger unit cell dimensions than the literature value of ZnO for samples obtained at 200-600 °C, while the unit cells of samples obtained at higher temperatures were quite close to the value of undoped ZnO. XPS showed that Eu was mainly in its 3+ state and well-distributed within the sponges but segregated at the ZnO sponge surface upon heating at 700-1000 °C, in accordance with XRD studies showing Eu₂O₃ formation.

Hyperspectral Imaging as a Tool to Study Optical Anisotropy in Lanthanide-Based Molecular Single Crystals

In this work, we describe a protocol for a novel application of hyperspectral imaging (HSI) in the analysis of luminescent lanthanide (Ln³⁺)-based molecular single crystals. As representative example, we chose a single crystal of the heterodinuclear Ln-based complex [TbEu(bpm)(tfaa)6] (bpm=2,2'-bipyrimidine, tfaa^- =1,1,1-trifluoroacetylacetonate) exhibiting bright visible emission under UV excitation. HSI is an emerging technique that combines 2-dimensional spatial imaging of a luminescent structure with spectral information from each pixel of the obtained image. Specifically, HSI on single crystals of the [Tb-Eu] complex provided local spectral information unveiling variation of the luminescence intensity at different points along the studied crystals. These changes were attributed to the optical anisotropy present in the crystal, which results from the different molecular packing of Ln³⁺ ions in each one of the directions of the crystal structure. The HSI herein described is an example of the suitability of such technique for spectro-spatial investigations of molecular materials. Yet, importantly, this protocol can be easily extended for other types of luminescent materials (such as micron-sized molecular crystals, inorganic microparticles, nanoparticles in biological tissues, or labelled cells, among others), opening many possibilities for deeper investigation of structure-property relationships. Ultimately, such investigations will provide knowledge to be leveraged into the engineering of advanced materials for a wide range of applications from bioimaging to technological applications, such as waveguides or optoelectronic devices.

Exploring the dual functionality of an ytterbium complex for luminescence thermometry and slow magnetic relaxation

We present a comprehensive investigation of the magnetic and optical properties of an ytterbium complex, which combines two desirable and practical features into a single molecular system. Based upon YbIII ions that promote near-infrared optical activity and a chemical backbone that is ideal for an in-depth understanding of the magnetic behaviour, we have designed a multifunctional opto-magnetic species that operates as a luminescent thermometer and as a single-molecule magnet (SMM). Our magnetic investigations, in conjunction with ab initio calculations, reveal one of the highest energy barriers reported for an YbIII-based complex. Moreover, we correlate this anisotropic barrier with the emission spectrum of the compound, wherein we provide a complete assignment of the energetic profile of the complex. Such studies lay the foundation for the design of exciting multi-faceted materials that are able to retain information at the single-molecule level and possess built-in thermal self-monitoring capabilities.

A Luminescent Thermometer Exhibiting Slow Relaxation of the Magnetization: Toward Self-Monitored Building Blocks for Next-Generation Optomagnetic Devices

The development and integration of Single-Molecule Magnets (SMMs) into molecular electronic devices continue to be an exciting challenge. In such potential devices, heat generation due to the electric current is a critical issue that has to be considered upon device fabrication. To read out accurately the temperature at the submicrometer spatial range, new multifunctional SMMs need to be developed. Herein, we present the first self-calibrated molecular thermometer with SMM properties, which provides an elegant avenue to address these issues. The employment of 2,2'-bipyrimidine and 1,1,1-trifluoroacetylacetonate ligands results in a dinuclear compound, [Dy₂(bpm)(tfaa)₆], which exhibits slow relaxation of the magnetization along with remarkable photoluminescent properties. This combination allows the gaining of fundamental insight in the electronic properties of the compound and investigation of optomagnetic cross-effects (Zeeman effect). Importantly, spectral variations stemming from two distinct thermal-dependent mechanisms taking place at the molecular level are used to perform luminescence thermometry over the 5-398 K temperature range. Overall, these properties make the proposed system a unique molecular luminescent thermometer bearing SMM properties, which preserves its temperature self-monitoring capability even under applied magnetic fields.

Cubic versus hexagonal - effect of host crystallinity on the T1 shortening behaviour of NaGdF4 nanoparticles

Sodium gadolinium fluoride (NaGdF4) nanoparticles are promising candidates as T1 shortening magnetic resonance imaging (MRI) contrast agents due to the paramagnetic properties of the Gd3+ ion. Effects of size and surface modification of these nanoparticles on proton relaxation times have been widely studied. However, to date, there has been no report on how T1 relaxivity (r1) is affected by the different polymorphs in which NaGdF4 crystallizes: cubic (α) and hexagonal (β). Here, a microwave-assisted thermal decomposition method was developed that grants selective access to NaGdF4 nanoparticles of either phase in the same size range, allowing the influence of host crystallinity on r1 to be investigated. It was found that at 3 T cubic NaGdF4 nanoparticles exhibit larger r1 values than their hexagonal analogues. This result was interpreted based on Solomon-Bloembergen-Morgan theory, suggesting that the inner sphere contribution to r1 is more pronounced for cubic NaGdF4 nanoparticles as compared to their hexagonal counterparts. This holds true irrespective of the chosen surface modification, i.e. small citrate groups or longer chain poly(acrylic acid). Key aspects were found to be a polymorph-induced larger hydrodynamic diameter and the higher magnetization possessed by cubic nanoparticles.

Probing Optical Anisotropy and Polymorph-Dependent Photoluminescence in [Ln2 ] Complexes by Hyperspectral Imaging on Single Crystals

Two homodinuclear and one heterodinuclear lanthanide (Ln)-based complexes of the general formula [Ln₂ (bpm)(tfaa)₆ ] (Ln=Eu (1), Tb (2), Eu-Tb (3), bpm=2,2'-bipyrimidine, tfaa^- =1,1,1-trifluoroacetylacetonate) were synthesized and characterized by single-crystal photoluminescence spectroscopy and hyperspectral imaging. Complexes 1 and 2 crystallize in two polymorphic structures, while three polymorphs were isolated for 3, namely having needle-, plate-, and block-like morphologies. Single-crystal photoluminescence spectroscopy and imaging on Eu³⁺ -containing 1 and 3 revealed polymorph-dependent J-splitting of the hypersensitive ⁵ D₀ →⁷ F₂ Eu³⁺ transition as well as electric-to-magnetic dipole emission intensity ratios. According to these observations, the lowest symmetry chemical environment was attributed to the Eu³⁺ ions present in the needle-like polymorph, also in agreement with single-crystal X-ray diffraction analysis. More importantly, hyperspectral imaging on all three single-crystal polymorphs of 3 exhibits optical anisotropy with photoluminescence enhancement at specific crystallographic faces. This behavior was ascribed to the distinct molecular packing of the Ln-Ln dimers in each polymorphic crystal as well as to face-specific local symmetry of the Eu³⁺ centers. Overall, opto-structural relationships of three Ln-Ln dimers and their single-crystal polymorphs were established as a particularly promising avenue for control of photoluminescence by chemical crystal engineering.

Double rare-earth nanothermometer in aqueous media: opening the third optical transparency window to temperature sensing

Owing to the alluring possibility of contactless temperature probing with microscopic spatial resolution, photoluminescence nanothermometry at the nanoscale is rapidly advancing towards its successful application in biomedical sciences. The emergence of near-infrared nanothermometers has paved the way for temperature sensing at the deep tissue level. However, water dispersibility, adequate size at the nanoscale, and the capability to efficiently operate in the second and third biological optical transparency windows are the requirements that still have to be fulfilled in a single nanoprobe. In this work, these requirements are addressed by rare-earth doped nanoparticles with core/shell-architecture, dispersed in water, whose excitation and emission wavelengths conveniently fall within the biological optical transparency windows. Under heating-free 800 nm excitation, double nanothermometry is realized either with Ho³⁺-Nd³⁺ (1.18-1.34 μm) or Er³⁺-Nd³⁺ (1.55-1.34 μm) NIR emission band ratios, both displaying equal thermal sensitivities around 1.1% °C^-1. It is further demonstrated that, along with the interionic energy transfer processes, the thermometric properties of these nanoparticles are also governed by the temperature dependent energy transfer to the surrounding solvent (water) molecules. Overall, this work presents a novel water dispersible double ratiometric nanothermometer operating in the second and third biological optical transparency windows. The temperature dependent particle-solvent interaction is also presented, which is critical for e.g. future in vivo applications.

Covering the optical spectrum through collective rare-earth doping of NaGdF4 nanoparticles: 806 and 980 nm excitation routes

Sensitization of numerous emission bands (from ultraviolet to near-infrared) in rare-earth doped multilayered nanoparticles: 806 versus 980 nm excitation.

Optical nanoprobes for biomedical applications: shining a light on upconverting and near-infrared emitting nanoparticles for imaging, thermal sensing, and photodynamic therapy

Shining a light on spectrally converting lanthanide (Ln³⁺)-doped nanoparticles: progress, trends, and challenges in Ln³⁺-nanoprobes for near-infrared bioimaging, nanothermometry, and photodynamic therapy.

Exploiting the biological windows: current perspectives on fluorescent bioprobes emitting above 1000 nm

With the goal of developing more accurate, efficient, non-invasive and fast diagnostic tools, the use of near-infrared (NIR) light in the range of the second and third biological windows (NIR-II: 1000-1350 nm, NIR-III: 1550-1870 nm) is growing remarkably as it provides the advantages of deeper penetration depth into biological tissues, better image contrast, reduced phototoxicity and photobleaching. Consequently, NIR-based bioimaging has become a quickly emerging field and manifold new NIR-emitting bioprobes have been reported. Classes of materials suggested as potential probes for NIR-to-NIR bioimaging (using NIR light for the excitation and emission) are quite diverse. These include rare-earth based nanoparticles, Group-IV nanostructures (single-walled carbon nanotubes, carbon nanoparticles and more recently Si- or Ge-based nanostructures) as well as Ag, In and Pb chalcogenide quantum dots. This review summarizes and discusses current trends, material merits, and latest developments in NIR-to-NIR bioimaging taking advantage of the region above 1000 nm (i.e. the second and third biological windows). Further consideration will be given to upcoming probe materials emitting in the NIR-I region (700-950 nm), thus do not possess emissions in these two windows, but have high expectations. Overall, the focus is placed on recent discussions concerning the optimal choice of excitation and emission wavelengths for deep-tissue high-resolution optical bioimaging and on fluorescent bioprobes that have successfully been implemented in in vitro and in vivo applications.

Upconverting and NIR emitting rare earth based nanostructures for NIR-bioimaging

In recent years, significant progress was achieved in the field of nanomedicine and bioimaging, but the development of new biomarkers for reliable detection of diseases at an early stage, molecular imaging, targeting and therapy remains crucial. The disadvantages of commonly used organic dyes include photobleaching, autofluorescence, phototoxicity and scattering when UV (ultraviolet) or visible light is used for excitation. The limited penetration depth of the excitation light and the visible emission into and from the biological tissue is a further drawback with regard to in vivo bioimaging. Lanthanide containing inorganic nanostructures emitting in the near-infrared (NIR) range under NIR excitation may overcome those problems. Due to the outstanding optical and magnetic properties of lanthanide ions (Ln(3+)), nanoscopic host materials doped with Ln(3+), e.g. Y2O3:Er(3+),Yb(3+), are promising candidates for NIR-NIR bioimaging. Ln(3+)-doped gadolinium-based inorganic nanostructures, such as Gd2O3:Er(3+),Yb(3+), have a high potential as opto-magnetic markers allowing the combination of time-resolved optical imaging and magnetic resonance imaging (MRI) of high spatial resolution. Recent progress in our research on over-1000 nm NIR fluorescent nanoprobes for in vivo NIR-NIR bioimaging will be discussed in this review.

Cytotoxic aspects of gadolinium oxide nanostructures for up-conversion and NIR bioimaging

Bioimaging is an important diagnostic tool in the investigation and visualization of biological phenomena in cells and in medicine. In this context, up-converting Gd(2)O(3):Er(3+),Yb(3+) nanostructures (nanoparticles, nanorods) have been synthesized by precipitation methods and hydrothermal synthesis. Independent of size and morphology, Gd(2)O(3):Er(3+),Yb(3+) powders show up-conversion (550 nm, 670 nm) and near-infrared emission (1.5 μm) upon 980 nm excitation, which makes these structures interesting for application as biomarkers. With regard to their potential application in bioimaging, cytotoxicity is an important aspect and is strongly affected by the physico-chemical properties of the investigated nanostructures. Therefore, the cytotoxic effect of bare and poly(ethylene glycol)-b-poly(acrylic acid) block co-polymer-modified nanostructures on non-phagocytic and phagocytic cells (B-cell hybridoma cells and macrophages) was investigated. The observed cytotoxic behavior in the case of macrophages incubated with bare nanostructures was assigned to the poor chemical durability of gadolinium oxide, but could be overcome by surface modification.

In vitro and in vivo investigations of upconversion and NIR emitting Gd₂O₃:Er³⁺,Yb³⁺ nanostructures for biomedical applications

The use of an "over 1000-nm near-infrared (NIR) in vivo fluorescence bioimaging" system based on lanthanide containing inorganic nanostructures emitting in the visible and NIR range under 980-nm excitation is proposed. It may overcome problems of currently used biomarkers including color fading, phototoxicity and scattering. Gd(2)O(3):Er(3+),Yb(3+) nanoparticles and nanorods showing upconversion and NIR emission are synthesized and their cytotoxic behavior is investigated by incubation with B-cell hybridomas and macrophages. Surface modification with PEG-b-PAAc provides the necessary chemical durability reducing the release of toxic Gd(3+) ions. NIR fluorescence microscopy is used to investigate the suitability of the nanostructures as NIR-NIR biomarkers. The in vitro uptake of bare and modified nanostructures by macrophages is investigated by confocal laser scanning microscopy. In vivo investigations revealed nanostructures in liver, lung, kidneys and spleen a few hours after injection into mice, while most of the nanostructures have been removed from the body after 24 h.

Improving hospital billing and receivables management: principles for profitability

For many hospitals, billing and receivables management are inefficient and costly. Economic recession, increasing costs for patient and provider alike, and cost-containment strategies will only compound difficulties. The author describes the foundations of an automated billing system that would save hospitals time, error, and, most importantly, money.

[Fungus colonization in colitis]

Fungal cultures, unstained smears and histological assessment of endoscopically obtained particles from ulcers in rectum, colon or terminal ileum were obtained in a prospective study of possible fungal infection in 78 patients with colitis of various aetiologies (Crohn's disease - 46; ulcerative colitis - 21; infectious colitis - 5; ischaemic colitis - 2; radiation colitis - 1; non-classifiable colitis - 3). Positive fungal culture was obtained in 13 patients (16.7%). The germ count was low (2--8 colonies per biopsy piece). The demonstrated fungi were almost exclusively Candida or Torulopsis. The potentially pathogenic mycelia phase of the fungi were never seen, either histologically or in unstained preparations. Stool specimens, obtained at the same time, were examined in 54 patients: positive cultures were obtained in 14 (25.9%). Only rarely were there concordance of positive fungal findings in both ulcer particles and faeces. It is concluded that (1) there is little danger of secondary fungal infection in colitis of various aetiologies; (2) positive faecal fungal culture is apparently of no pathogenic significance if the germ count is less than 10(6) per gram stool; (3) in the lower as well as the upper gastro-intestinal tract pathogenic fungal infection can be demonstrated only by endoscopy and biopsy.

[Fungal infestation of gastroduodenal ulcers: incidence and significance (author's transl)]

In a prospective study of 132 cases of gastroduodenal ulcer, proven by endoscopic biopsy, there were 59 in which fungi were cultered (44.7%). There was no significant difference in incidence between gastric ulcer (46.2%) and duodenal ulcer (42.6%), or between benign and malignant gastric ulcer (47.2 and 42.1%, respectively). Most of the fungi were yeasts of the genus Candida and Torulopsis. The mycel phase was demonstrable only in the native or histological preparation (16.7% [native] and 10.6% [histological] positive findings). In all those cases in which pseudomycels were demonstrated the culture count was especially high (more than 20 colonies). In most of these there was an additional disease which may be associated with immunological insufficiency (e.g. diabetes, chronic alcoholism, malignoma). The presence of pseudomycelia or more than 20 colonies in the culture from gastroduodenal ulcers are thus less of a pointer as to whether the local lesion is benign or malignant than to a general weakening of the organism's defence mechanisms.