Improving the Bioaccessibility and Bioavailability of Carotenoids by Means of Nanostructured Delivery Systems: A Comprehensive Review

Carotenoids are bioactive compounds provided by the diet playing a key role in maintaining human health. Therefore, they should be ingested daily in an adequate amount. However, even a varied and well-balanced diet does not guarantee an adequate intake, as both the bioaccessibility and bioavailability of the compounds significantly affect their absorption. This review summarizes the main results achieved in improving the bioaccessibility and bioavailability of carotenoids by means of nanostructured delivery systems, discussing in detail the available lipid-based and biopolymeric nanocarriers at present, with a focus on their formulation and functional efficiency. Although the toxicity profile of these innovative delivery systems is not fully understood, especially for long-term intake, these systems are an effective and valuable approach to increase the availability of compounds of nutritional interest.

Practical scale modification of oleogels by ultrasonic standing waves

Lipid-based materials, such as substitutes for saturated fats (oleogels) structurally modified with ultrasonic standing waves (USW), have been developed by our group. To enable their potential application in food products, pharmaceuticals, and cosmetics, practical and economical production methods are needed. Here, we report scale-up of our procedure of structurally modifying oleogels via the use of USW by a factor of 200 compared to our previous microfluidic chamber. To this end, we compared three different USW chamber prototypes through finite element simulations (FEM) and experimental work. Imaging of the internal structure of USW-treated oleogels was used as feedback for successful development of chambers, i.e., the formation of band-like structures was the guiding factor in chamber development. We then studied the bulk mechanical properties by a uniaxial compression test of the sonicated oleogels obtained with the most promising USW chamber, and sampled local mechanical properties using scanning acoustic microscopy. The results were interpreted using a hyperelastic foam model. The stability of the sonicated oleogels was compared to control samples using automated image analysis oil-release tests. This work enabled the effective mechanical-structural manipulation of oleogels in volumes of 10-100 mL, thus paving the way for USW treatments of large-scale lipid-based materials.

Insight on Current Advances in Food Science and Technology for Feeding the World Population

While the world population is steadily increasing, the capacity of Earth to renew its resources is continuously declining. Consequently, the bioresources required for food production are diminishing and new approaches are needed to feed the current and future global population. In the last decades, scientists have developed novel strategies to reduce food loss and waste, improve food production, and find new ingredients, design and build new food structures, and introduce digitalization in the food system. In this work, we provide a general overview on circular economy, alternative technologies for food production such as cellular agriculture, and new sources of ingredients like microalgae, insects, and wood-derived fibers. We present a summary of the whole process of food design using creative problem-solving that fosters food innovation, and digitalization in the food sector such as artificial intelligence, augmented and virtual reality, and blockchain technology. Finally, we briefly discuss the effect of COVID-19 on the food system. This review has been written for a broad audience, covering a wide spectrum and giving insights on the most recent advances in the food science and technology area, presenting examples from both academic and industrial sides, in terms of concepts, technologies, and tools which will possibly help the world to achieve food security in the next 30 years.

Automated image analysis method for oil-release test of lipid-based materials

We present an automated method to determine oil release from lipid-based materials. Oil-release tests can provide information regarding the ability to retain oil within the structuring network of lipid-based materials. This test provides a first insight into the stability of these materials and their possible applications in food, cosmetic, and pharmaceutical products. The method presented features a simple setup comprising a camera that automatically captures images of the evolution of the oil stain released from lipid-based materials placed on a filter paper. Image postprocessing is performed with two custom-made scripts developed for the freeware application ImageJ. The scripts allow direct calculation of the oil-stain area from all images stored in a folder returning as output numerical values in a table. This method was shown to be:•

inexpensive, as the employed tools and equipment are available in most laboratories both in academia and industry,

•

self-running, as the method automatically captures images at predefined time intervals for a certain time span,

•

practical, as manual-image analysis is unnecessary (200 images can be automatically analyzed in 3 min).

Inhibition of lipid autoxidation by vegetable waxes

This study aims to evaluate the effect of vegetable waxes on the kinetics of lipid oxidation of linseed oil. Apple and orange waxes were obtained using supercritical carbon dioxide. The capacity of waxes to inhibit or retard the oxidation of linseed oil was determined by isothermal calorimetry at 298 K. The results show that waxes were able to slow down linseed oil autoxidation, with apple waxes being more active than orange waxes. However, such activity was visible only at relatively high concentrations (>1% of waxes), greatly higher than the concentration used with radical chain breakers like BHT (0.2%). The inhibition activity was explained by considering three different mechanisms: (1) residual polyphenol content in the wax, (2) high termination rate of the radical chain process, and (3) physical hindrance of the oxidation process by change in viscosity. All these mechanisms were possible, although the latter seemed to be the most important. Finally, the importance of waxes in the inhibition of lipid autoxidation was determined by testing their inhibition activity in combination with primary antioxidants. A mixture of waxes with BHA, ethoxyquin and α-tocopherol showed a higher rate of inhibition than when present individually. This suggested a strong cooperative radical scavenging activity, whose beneficial effect might pave the way to the formulation of novel functional ingredients.

Lignin-Rich PHWE Hemicellulose Extracts Responsible for Extended Emulsion Stabilization

Wood hemicelluloses have an excellent capacity to form and stabilize oil-in-water emulsions. Galactoglucomannans (GGM) from spruce and glucuronoxylans (GX) from birch provide multifunctional protection against physical breakdown and lipid oxidation in emulsions. Phenolic residues, coextracted with hemicelluloses using the pressurized hot water (PHWE) process, seem to further enhance emulsion stability. According to hypothesis, phenolic residues associated with hemicelluloses deliver and anchor hemicelluloses at the emulsion interface. This study is the first to characterize the structure of the phenolic residues in both GGM- and GX-rich wood extracts and their role in the stabilization of emulsions. PHWE GGM and GX were fractionated by centrifugation to obtain concentrated phenolic residues as one fraction (GGM-phe and GX-phe) and partially purified hemicelluloses as the other fraction (GGM-pur and GX-pur). To evaluate the role of each fraction in terms of physical and oxidative stabilization, rapeseed oil-in-water emulsions were prepared using GGM, GX, GGM-pur, and GX-pur as stabilizers. Changes in droplet-size distribution and peroxide values were measured during a 3-month accelerated storage test. The results for fresh emulsions indicated that the phenolic-rich fractions in hemicelluloses take part in the formation of emulsions. Furthermore, results from the accelerated storage test indicated that phenolic structures improve the long-term physical stability of emulsions. According to measured peroxide values, all hemicelluloses examined inhibited lipid oxidation in emulsions, GX being the most effective. This indicates that phenolic residues associated with hemicelluloses act as antioxidants in emulsions. According to chemical characterization using complementary methods, the phenolic fractions, GGM-phe and GX-phe, were composed mainly of lignin. Furthermore, the total carbohydrate content of the phenolic fractions was clearly lower compared to the starting hemicelluloses GGM and GX, and the purified fractions GGM-pur and GX-pur. Apparently, the phenolic structures were enriched in the GGM-phe and GX-phe fractions, which was confirmed by NMR spectroscopy as well as by other characterization methods. The frequency of the main bonding pattern in lignins, the β-O-4 structure, was clearly very high, suggesting that extracted lignin remains in native form. Furthermore, the lignin carbohydrate complex of γ-ester type was found, which could explain the excellent stabilizing properties of PHWE hemicelluloses in emulsions.

Microemulsions as delivery systems of lemon oil and β-carotene into beverages: stability test under different light conditions

BACKGROUND

Microemulsions have been proposed as delivery systems for different lipophilic substances in transparent water-based systems. The chemical stability of the delivered compounds is a key factor to broaden the application of microemulsions in the food sector. The stability of a model beverage containing a microemulsion delivering β-carotene and lemon oil was tested under increasing light intensity up to 6000 lx at 20 °C.

RESULTS

The transparent microemulsion resulted physically stable during storage indicating that no coalescence phenomenon occurred. On the contrary, both colour and flavour of the microemulsion degraded as a consequence of limonene and β-carotene oxidation. Kinetic data obtained at increasing light intensity were used to estimate the light dependence of beverage spoilage and the mathematical relationship obtained was used to predict spoilage rate under different light conditions. Finally, a shelf life predictive model was proposed.

CONCLUSIONS

Transparent microemulsions can be successfully used to deliver flavoured oil and colourants into beverages. However, the photostability of the delivered compounds should be carefully studied to estimate product shelf life. To this aim, the availability of models predicting shelf life as a function of enlightening conditions could largely contribute to speed up the process. © 2019 Society of Chemical Industry.

Structural and viscoelastic characterization of ternary mixtures of sunflower oil, saturated monoglycerides and aqueous phases containing different bases

The structure at different length scales and the viscoelastic properties of ternary mixtures composed of saturated monoglycerides, sunflower oil and aqueous solutions of weak bases (KHCO₃, NaHCO₃, and NH₄HCO₃) or strong bases (NaOH and KOH) were investigated. The characteristics of ternary mixtures were studied systematically by using polarized light microscopy, differential scanning calorimetry (DSC), synchrotron X-ray diffraction (XRD) and rheological analysis. Results showed that the base type and concentration greatly affected the structure of the mixtures. The use of strong bases allowed gelled systems to be obtained only at low concentrations (<10mM). On the contrary, the presence of weak bases induced gelling at all concentrations considered (from 1 to 1000mM). The increase of base concentration led to a reduction of the mean droplet diameter and melting temperature. At the same time, the viscoelastic characteristics as a function of base concentration followed a more complex behavior: G' and G″ progressively decreased as the salt concentration increased in a concentration range from 1 to 100mM, while the rheological parameters increased when salt concentration increased from 100 to 1000mM. The structural and viscoelastic behavior of systems prepared with different salts were commonly independent of the cation present in the medium. Results highlight that it is possible to tailor the structure of these gels by using specific bases.