1,2-Azolylamidino ruthenium(II) complexes with DMSO ligands: electro- and photocatalysts for CO2 reduction

New 1,2-azolylamidino complexes fac-[RuCl(DMSO)3(NHC(R)az*-κ2N,N)]OTf [R = Me (2), Ph (3); az* = pz (pyrazolyl, a), indz (indazolyl, b)] are synthesized via chloride abstraction from their corresponding precursors cis,fac-[RuCl2(DMSO)3(az*H)] (1) after subsequent base-catalyzed coupling of the appropriate nitrile with the 1,2-azole previously coordinated. All the compounds are characterized by 1H NMR, 13C NMR and IR spectroscopy. Those derived from MeCN are also characterized by X-ray diffraction. Electrochemical studies showed several reduction waves in the range of -1.5 to -3 V. The electrochemical behavior in CO2 media is consistent with CO2 electrocatalytic reduction. The catalytic activity expressed as [icat(CO2)/ip(Ar)] ranged from 1.7 to 3.7 for the 1,2-azolylamidino complexes at voltages of ca. -2.7 to -3 V vs. ferrocene/ferrocenium. Controlled potential electrolysis showed rapid decomposition of the Ru catalysts. Photocatalytic CO2 reduction experiments using compounds 1b, 2b and 3b carried out in a CO2-saturated MeCN/TEOA (4 : 1 v/v) solution containing a mixture of the catalyst and [Ru(bipy)3]2+ as the photosensitizer under continuous irradiation (light intensity of 150 mW cm-2 at 25 °C, λ > 300 nm) show that compounds 1b, 2b and 3b allowed CO2 reduction catalysis, producing CO and trace amounts of formate. The combined turnover number for the production of formate and CO is ca. 100 after 8 h and follows the order 1b < 2b ≈ 3b.

Improving the Insulating Capacity of Polyurethane Foams through Polyurethane Aerogel Inclusion: From Insulation to Superinsulation

A novel synthesis of polyurethane foam/polyurethane aerogel (PU_F–PU_A) composites is presented. Three different polyurethane reticulated foams which present the same density but different pore sizes (named S for small, M for medium, and L for large) have been used. After the characterization of the reference materials (either, foams, and pure aerogel), the obtained composites have been characterized in order to study the effect of the foam pore size on the final properties, so that density, shrinkage, porous structure, mechanical properties, and thermal conductivity are determined. A clear influence of the pore size on the density and shrinkage was found, and the lowest densities are those obtained from L composites (123 kg/m³). Moreover, the aerogel density and shrinkage have been significantly reduced through the employment of the polyurethane (PU) foam skeleton. Due to the enhanced mechanical properties of polyurethane aerogels, the inclusion of polyurethane aerogel into the foam skeleton helps to increase the elastic modulus of the foams from 0.03 and 0.08 MPa to 0.85 MPa, while keeping great flexibility and recovery ratios. Moreover, the synthesized PU_F–PU_A composites show an excellent insulating performance, reducing the initial thermal conductivity values from 34.1, 40.3, and 50.6 mW/(m K) at 10 °C for the foams S, M, and L, to 15.8, 16.6, and 16.1 mW/(m K), respectively. Additionally, the effect of the different heat transfer mechanisms to the total thermal conductivity is herein analyzed by using a theoretical model as well as the influence of the measurement temperature.

Silica-Based Aerogel Composites Reinforced with Reticulated Polyurethane Foams: Thermal and Mechanical Properties

In this work, silica aerogel composites reinforced with reticulated polyurethane (PU) foams have been manufactured having densities in the range from 117 to 266 kg/m3 and porosities between 85.7 and 92.3%. Two different drying processes were employed (ambient pressure drying and supercritical drying) and a surface modification step was applied to some of the silica formulations. These composites, together with the reference PU foam and the monolithic silica aerogels, were fully characterized in terms of their textural properties, mechanical properties and thermal conductivities. The surface modification with hexamethyldisilazane (HMDZ) proved to improve the cohesion between the reticulated foam and the silica aerogels, giving rise to a continuous network of aerogel reinforced by a polyurethane porous structure. The samples dried under supercritical conditions showed the best interaction between matrixes as well as mechanical and insulating properties. These samples present better mechanical properties than the monolithic aerogels having a higher elastic modulus (from 130 to 450 kPa), a really exceptional flexibility and resilience, and the capacity of being deformed without breaking. Moreover, these silica aerogel-polyurethane foam (Sil-PU) composites showed an excellent insulating capacity, reaching thermal conductivities as low as 14 mW/(m·K).

Optical Properties of Polyisocyanurate–Polyurethane Aerogels: Study of the Scattering Mechanisms

Highly transparent polyisocyanurate–polyurethane (PUR–PIR) aerogels were synthesized, and their optical properties were studied in detail. After determining the density and structural parameters of the manufactured materials, we analyzed their optical transmittance. It was demonstrated that the catalyst content used to produce the aerogels can be employed to tune the internal structure and optical properties. The results show that the employment of lower catalyst amounts leads to smaller particles forming the aerogel and concomitantly to higher transmittances, which reach values of 85% (650 nm) due to aerogel particles acting as scattering centers. Thus, it was found that the lower this size, the higher the transmittance. The effect of the sample thickness on the transmittance was studied through the Beer–Lambert law. Finally, the scattering mechanisms involved in the light attenuation were systematically evaluated by measuring a wide range of light wavelengths and determining the transition between Rayleigh and Mie scattering when the particles were larger. Therefore, the optical properties of polyurethane aerogels were studied for the first time, opening a wide range of applications in building and energy sectors such as glazing windows.

A New Methodology Based on Cell-Wall Hole Analysis for the Structure-Acoustic Absorption Correlation on Polyurethane Foams

Polyurethane foams with a hybrid structure between closed cell and open cell were fabricated and fully characterized. Sound absorption measurements were carried out in order to assess their acoustic performance at different frequency ranges. The cellular structure of these systems was studied in detail by defining some novel structural parameters that characterize the cell wall openings such as the average surface of holes (S_h), the number of holes (h), and the area percentage thereof (%HCW). Therefore, these parameters allow to analyze quantitatively the effect of different structural factors on the acoustic absorption performance. It has been found that the parameters under study have a remarkable influence on the normalized acoustic absorption coefficient at different frequency ranges. In particular, it has been demonstrated that increasing the surface of the holes and the percentage of holes in the cell walls allows increasing the acoustic absorption of these types of foams, a promising statement for developing highly efficient acoustic insulators. Additionally, we could determine that a suitable minimum value of hole surface to reach the highest sound dissipation for these samples exists.

Nanoparticles Addition in PU Foams: The Dramatic Effect of Trapped-Air on Nucleation

To determine the effect of nanoclays and trapped air on the formation of rigid polyurethane foams, three different production procedures were used. To study the influence of mixing at atmospheric pressure, two approaches were carried out employing either an electric or a magnetic stirrer. The third approach was executed by mixing under vacuum conditions with magnetic stirring. The samples thus obtained were characterized, and the effect of trapped air into the reactive mixtures was evaluated by analyzing the cellular structures. Different levels of trapped air were achieved when employing each manufacturing method. A correlation between the trapped air and the increase in the nucleation density when nanoclays were added was found: the cell nucleation density increased by 1.54 and 1.25 times under atmospheric conditions with electric and magnetic stirring, respectively. Nevertheless, samples fabricated without the presence of air did not show any nucleating effect despite the nanoclay addition (ratio of 1.09). This result suggests that the inclusion of air into the components is key for improving nucleation and that this effect is more pronounced when the polyol viscosity increases due to nanoclay addition. This is the most important feature determining the nucleating effect and, therefore, the corresponding cell size decreases.

Luminescent cis-Bis(bipyridyl)ruthenium(II) Complexes with 1,2-Azolylamidino Ligands: Photophysical, Electrochemical Studies, and Photocatalytic Oxidation of Thioethers

New 1,2-azolylamidino complexes cis-[Ru(bipy)₂(NH═C(R)az*-κ²N,N)](OTf)₂ (R = Me, Ph; az* = pz, indz, dmpz) are synthesized via chloride abstraction after a subsequent base-catalyzed coupling of a nitrile with the previously coordinated 1,2-azole. The synthetic procedure allows the easy obtainment of complexes having different electronic and steric 1,2-azoylamidino ligands. All of the compounds have been characterized by ¹H, ¹³C, and ¹⁵N NMR and IR spectroscopy and by monocrystal X-ray diffraction. Photophysical studies support their phosphorescence, whereas their electrochemistry reveals reversible Ru^II/Ru^III oxidations between +1.13 and +1.25 V (vs SCE). The complexes have been successfully used as catalysts in the photooxidation of different thioethers, the complex cis-[Ru(bipy)₂(NH═C(Me)dmpz-κ²N,N)]²⁺ showing better catalytic performance in comparison to that of [Ru(bipy)₃]²⁺. Moreover, the significant catalytic performance of the dimethylpyrazolylamidino complex is applied to the preparation of the drug modafinil, which is obtained using ambient oxygen as an oxidant. Finally, mechanistic assays suggest that the oxidation reaction follows a photoredox route via oxygen radical anion formation.

(1,2-Azole)bis(bipyridyl)ruthenium(II) Complexes: Electrochemistry, Luminescent Properties, And Electro- And Photocatalysts for CO2 Reduction

New cis-(1,2-azole)-aquo bis(2,2'-bipyridyl)ruthenium(II) (1,2-azole (az*H) = pzH (pyrazole), dmpzH (3,5-dimethylpyrazole), and indzH (indazole)) complexes are synthesized via chlorido abstraction from cis-[Ru(bipy)₂Cl(az*H)]OTf. The latter are obtained from cis-[Ru(bipy)₂Cl₂] after the subsequent coordination of the 1,2-azole. All the compounds are characterized by ¹H, ¹³C, ¹⁵N NMR spectroscopy as well as IR spectroscopy. Two chlorido complexes (pzH and indzH) and two aquo complexes (indzH and dmpzH) are also characterized by X-ray diffraction. Photophysical and electrochemical studies were carried out on all the complexes. The photophysical data support the phosphorescence of the complexes. The electrochemical behavior of all the complexes in an Ar atmosphere indicate that the oxidation processes assigned to Ru(II) → Ru(III) occurs at higher potentials in the aquo complexes. The reduction processes under Ar lead to several waves, indicating that the complexes undergo successive electron-transfer reductions that are centered in the bipy ligands. The first electron reduction is reversible. The electrochemical behavior in CO₂ media is consistent with CO₂ electrocatalyzed reduction, where the values of the catalytic activity [i_cat(CO₂)/i_p(Ar)] ranged from 2.9 to 10.8. Controlled potential electrolysis of the chlorido and aquo complexes affords CO and formic acid, with the latter as the major product after 2 h. Photocatalytic experiments in MeCN with [Ru(bipy)₃]Cl₂ as the photosensitizer and TEOA as the electron donor, which were irradiated with >300 nm light for 24 h, led to CO and HCOOH as the main reduction products, achieving a combined turnover number (TON_CO+HCOO^-) as high as 107 for 2c after 24 h of irradiation.

Identification by NMR of key compounds present in beer distillates and residual phases after dealcoholization by vacuum distillation

BACKGROUND

Nowadays, low alcohol and non-alcohol beer intake has increased due to expanding concerns about healthy diets. However, there are still appreciable differences between non-alcoholic beer and conventional beer, particularly regarding flavor. Vacuum distillation is commonly used to remove ethanol from the beer in industrial processes and it is used here.

RESULTS

The presence of n-propanol, isobutanol, 3-methylbutanol, 2-methylbutanol, 2-phenylethanol, ethyl acetate, isoamyl acetate, and acetaldehyde, which are key compounds responsible for aroma and flavor of beer, have been analyzed using nuclear magnetic resonance (NMR) spectroscopy in commercial beers and also in the corresponding distillates and residual phases after dealcoholization.

CONCLUSION

The compounds present in each phase were identified by monodimensional and bidimensional NMR spectra. The compounds that are completely removed or that remain in the residue of the conventional beers studied are described in detail. The presence of these compounds in dealcoholized beer would be beneficial in keeping the aroma and flavor in dealcoholized beer. © 2020 Society of Chemical Industry.

Luminescent Rhenium(I)tricarbonyl Complexes Containing Different Pyrazoles and Their Successive Deprotonation Products: CO2 Reduction Electrocatalysts

Cationic fac-[Re(CO)₃(pz*H)(pypzH)]OTf (pz*H = pyrazole, pzH; 3,5-dimethylpyrazole, dmpzH; indazole, indzH; 3-(2-pyridyl)pyrazole, pypzH) were obtained from fac-[ReBr(CO)₃(pypzH)] by halide abstraction with AgOTf and subsequent addition of the corresponding pyrazole. Successive deprotonation with Na₂CO₃ and NaOH gave neutral fac-[Re(CO)₃(pz*H)(pypz)] and anionic Na{fac-[Re(CO)₃(pz*)(pypz)]} complexes, respectively. Cationic fac-[Re(CO)₃(pz*H)(pypzH)]OTf, neutral complexes fac-[Re(CO)₃(pz*H)(pypz)], and fac-[Re(CO)₃(pypz)₂Na] were subjected to photophysical and electrochemical studies. They exhibit phosphorescent decays from a prevalently ³MLCT excited state with quantum yields (Φ) in the range between 0.03 and 0.58 and long lifetimes (τ from 220 to 869 ns). The electrochemical behavior in Ar atmosphere of cationic and neutral complexes indicates that the oxidation processes assigned to Re^I → Re^II occurs at lower potentials for the neutral complex compared to cationic complex. The reduction processes occur at the ligands and do not depend on the charge of the complexes. The electrochemical behavior in CO₂ saturated media is consistent with CO₂ electrocatalyzed reduction, where the values of the catalytic activity [i_cat(CO₂)/i_cat(Ar)] ranged from 2.7 to 11.5 (compared to 8.1 for fac-[Re(CO)₃Cl(bipy)] studied as a reference). Controlled potential electrolysis for the pyrazole cationic (3a) and neutral (4a) complexes after 1 h affords CO in faraday yields of 61 and 89%, respectively. These values are higher for indazole complexes and may be related to the acidity of the coordinated pyrazole.

Identification and Quantification of Cell Gas Evolution in Rigid Polyurethane Foams by Novel GCMS Methodology

This paper presents a new methodology based on gas chromatography-mass spectrometry (GCMS) in order to separate and quantify the gases presented inside the cells of rigid polyurethane (RPU) foams. To demonstrate this novel methodology, the gas composition along more than three years of aging is herein determined for two samples: a reference foam and foam with 1.5 wt% of talc. The GCMS method was applied, on one hand, for the accurate determination of C₅H₁₀ and CO₂ cell gases used as blowing agents and, on the other hand, for N₂ and O₂ air gases that diffuse rapidly from the surrounding environment into foam cells. GCMS results showed that CO₂ leaves foam after 2.5 month (from 21% to 0.03% for reference foam and from 17% to 0.03% for foam with 1.5% talc). C₅H₁₀ deviates during 3.5 months (from 28% up to 39% for reference foam and from 29% up to 36% for foam with talc), then it starts to leave the foam and after 3.5 year its content is 13% for reference and 10% for foam with talc. Air diffuses inside the cells faster for one year (from 51% up to 79% for reference and from 54% up to 81% for foam with talc) and then more slowly for 3.5 years (reaching 86% for reference and 90% for foam with talc). Thus, the fast and simple presented methodology provides valuable information to understand the long-term thermal conductivity of the RPU foams.

Luminescent rhenium(I) tricarbonyl complexes with pyrazolylamidino ligands: photophysical, electrochemical, and computational studies

New pyrazolylamidino complexes fac-[ReCl(CO)3(NH[double bond, length as m-dash]C(Me)pz*-κ(2)N,N)] (pz*H = pyrazole, pzH; 3,5-dimethylpyrazole, dmpzH; indazole, indzH) and fac-[ReBr(CO)3(NH[double bond, length as m-dash]C(Ph)pz*-κ(2)N,N)] are synthesized via base-catalyzed coupling of the appropriate nitrile with pyrazole, or via metathesis by halide abstraction with AgBF4 from a bromido pyrazolylamidino complex and the subsequent addition of LiCl. In order to study both the influence of the substituents present at the pyrazolylamidino ligand, and that of the "sixth" ligand in the complex, photophysical, electrochemical, and computational studies have been carried out on this series and other complexes previously described by us, of the general formula fac-[ReL(CO)3(NH[double bond, length as m-dash]C(R')pz*-κ(2)N,N)](n+) (L = Cl, Br; R' = Me, Ph, n = 0; or L = NCMe, dmpzH, indzH, R' = Me, n = 1). All complexes exhibit phosphorescent decays from a prevalently (3)MLCT excited state with quantum yields (Φ) in the range between 0.007 and 0.039, and long lifetimes (τ∼ 8-1900 ns). The electrochemical study reveals irreversible reduction for all complexes. The oxidation of the neutral complexes was found to be irreversible due to halido-dissociation, whereas the cationic species display a reversible process implying the ReI/ReII couple. Density functional and time-dependent density functional theory (TD-DFT) calculations provide a reasonable trend for the values of emission energies in line with the experimental photophysical data, supporting the (3)MLCT based character of the emissions.

Amidino ligands obtained from the coupling of 1-methylcytosine and nitrile: a new method to incorporate biomolecules into luminescent Re(CO)3 complexes

Amidino chelating ligands obtained from the coupling of 1-methylcytosine with nitriles allow the incorporation of biologically relevant substrates into Re(CO)₃ complexes.

Homo- and heteropolymetallic 3-(2-pyridyl)pyrazolate manganese and rhenium complexes

Heteropolymetallic complexes with pyridylpyrazolates bridging Mn and Na or K are tetrametallic and contain bridging pyridylpyrazolates with an unprecedented coordination mode, whereas the Mn/Li complex is bimetallic.

Rhenium-Mediated Coupling of Acetonitrile and Pyrazoles. New Molecular Clefts for Anion Binding

The reaction of fac-[ReBr(CO)3(NCMe)2] (1) with either pyrazole (Hpz) or 3,5-dimethylpyrazole (Hdmpz) in a 1:2 Re/pyrazole ratio affords the known complexes fac-[ReBr(CO)3(Hpz)2] (2) and [ReBr(CO)3(Hdmpz)2] (3). Using a 1:1 ratio, MeCN as solvent, and longer reaction times led to a mixture in which the major components are the pyrazolylamidino complexes fac-[ReBr(CO)3(HN=C(CH3)pz-kappa2N,N)] (4) and fac-[ReBr(CO)3(HN=C(CH3)dmpz-kappa2N,N)] (5). The complexes fac-[ReBr(CO)3(Hpz)(NCMe)] (6) and fac-[ReBr(CO)3(Hdmpz)(NCMe)] (7) (along with 2 and 3) were found to be minor components of these reactions. Analogous reactions of fac-[Re(OClO3)(CO)3(NCMe)2] yielded fac-[Re(NCCH3)(CO)3(HN=C(CH3)pz-kappa2N,N)]ClO4 (8), fac-[Re(NCCH3)(CO)3(HN=C(CH3)dmpz-kappa2N,N)]ClO4 (9), fac-[Re(Hpz)(CO)3(HN=C(CH3)pz-kappa2N,N)]ClO4 (10), and fac-[Re(Hdmpz)(CO)3(HN=C(CH3)dmpz-kappa2N,N)]ClO4 (11). The X-ray structure of 11 showed the perchlorate anion to be hydrogen-bonded by the N-H groups of the pyrazole and pyrazolylamidino ligands. The behavior of the compound fac-[Re(Hdmpz)(CO)3(HN=C(CH3)dmpz-kappa2N,N)]BAr'4 (13) (synthesized by reaction of [ReBr(CO)3(Hdmpz)2] (3) with (i) AgOTf and (ii) NaBAr'(4)/MeCN) as an anion receptor has been studied in CD3CN solution. In addition, the structure of the supramolecular adduct fac-[Re(CO)3(Hdmpz)(HN=C(CH3)dmpz-kappa2N,N)].Cl (14), featuring chloride binding by the two N-H groups, was determined by X-ray diffraction.