Medical-grade polycaprolactone scaffolds made by melt electrospinning writing for oral bone regeneration - a pilot study in vitro

BACKGROUND

The spectrum of indications for the use of membranes and scaffolds in the field of oral and maxillofacial surgery includes, amongst others, guided bone regeneration (GBR). Currently available membrane systems face certain disadvantages such as difficult clinical handling, inconsistent degradation, undirected cell growth and a lack of stability that often complicate their application. Therefore, new membranes which can overcome these issues are of great interest in this field.

METHODS

In this pilot study, we investigated polycaprolactone (PCL) scaffolds intended to enhance oral wound healing by means of melt electrospinning writing (MEW), which allowed for three-dimensional (3D) printing of micron scale fibers and very exact fiber placement. A singular set of box-shaped scaffolds of different sizes consisting of medical-grade PCL was examined and the scaffolds' morphology was evaluated via scanning electron microscopy (SEM). Each prototype sample with box sizes of 225 μm, 300 μm, 375 μm, 450 μm and 500 μm was assessed for cytotoxicity and cell growth by seeding each scaffold with human osteoblast-like cell line MG63.

RESULTS

All scaffolds demonstrated good cytocompatibility according to cell viability, protein concentration, and cell number. SEM analysis revealed an exact fiber placement of the MEW scaffolds and the growth of viable MG63 cells on them. For the examined box-shaped scaffolds with pore sizes between 225 μm and 500 μm, a preferred box size for initial osteoblast attachment could not be found.

CONCLUSIONS

These well-defined 3D scaffolds consisting of medical-grade materials optimized for cell attachment and cell growth hold the key to a promising new approach in GBR in oral and maxillofacial surgery.

Theoretical modelling of fibrinogen supplementation with therapeutic plasma, cryoprecipitate, or fibrinogen concentrate

Background

We aimed to create a theoretical tool to model the effect of three haemostatic agents containing fibrinogen (therapeutic plasma, cryoprecipitate, and fibrinogen concentrate) on the patient's plasma fibrinogen level.

Methods

A mathematical model was developed step-wise. The relationship between the amount of haemostatic agent and plasma fibrinogen level was plotted for each agent. A fibrinogen concentration simulator (FCS_amount) was developed, where the amount of haemostatic agent was calculated from patient characteristics, agent characteristics, and target plasma fibrinogen level. Refinements were introduced so that (i) FCS_amount would account for in vivo fibrinogen recovery, (ii) circulatory volume would not increase ad infinitum with increasing amounts, and (iii) red blood cells would be included in the simulation if haematocrit decreased below a certain level. A second FCS (FCS_level) was created to calculate fibrinogen levels resulting from specified amounts of haemostatic agents.

Results

Fibrinogen concentration in haemostatic agents has a critical impact on their ability to increase patients' fibrinogen levels. If the target plasma fibrinogen level approaches the concentration of the fibrinogen source, the required amounts increase exponentially; it is impossible to achieve a target above the concentration of the fibrinogen source.

Conclusions

We successfully developed two theoretical tools answering the questions: ‘How much therapeutic plasma, cryoprecipitate, or fibrinogen concentrate would be needed to achieve a specified target fibrinogen level?’ and ‘What would be the resultant fibrinogen level for a specified amount of haemostatic agent?’ The current tools are not intended for clinical application, but they are potentially useful for educational purposes.

Focused-ion-beam-inflicted surface amorphization and gallium implantation--new insights and removal by focused-electron-beam-induced etching

Recently focused-electron-beam-induced etching of silicon using molecular chlorine (Cl(2)-FEBIE) has been developed as a reliable and reproducible process capable of damage-free, maskless and resistless removal of silicon. As any electron-beam-induced processing is considered non-destructive and implantation-free due to the absence of ion bombardment this approach is also a potential method for removing focused-ion-beam (FIB)-inflicted crystal damage and ion implantation. We show that Cl(2)-FEBIE is capable of removing FIB-induced amorphization and gallium ion implantation after processing of surfaces with a focused ion beam. TEM analysis proves that the method Cl(2)-FEBIE is non-destructive and therefore retains crystallinity. It is shown that Cl(2)-FEBIE of amorphous silicon when compared to crystalline silicon can be up to 25 times faster, depending on the degree of amorphization. Also, using this method it has become possible for the first time to directly investigate damage caused by FIB exposure in a top-down view utilizing a localized chemical reaction, i.e. without the need for TEM sample preparation. We show that gallium fluences above 4 × 10(15) cm(-2) result in altered material resulting from FIB-induced processes down to a depth of ∼ 250 nm. With increasing gallium fluences, due to a significant gallium concentration close beneath the surface, removal of the topmost layer by Cl(2)-FEBIE becomes difficult, indicating that gallium serves as an etch stop for Cl(2)-FEBIE.

High performance Ω-gated Ge nanowire MOSFET with quasi-metallic source/drain contacts

Ge nanowires (NWs) about 2 µm long and 35 nm in diameter are grown heteroepitaxially on Si(111) substrates in a hot wall low-pressure chemical vapor deposition (LP-CVD) system using Au as a catalyst and GeH(4) as precursor. Individual NWs are contacted to Cu pads via e-beam lithography, thermal evaporation and lift-off techniques. Self-aligned and atomically sharp quasi-metallic copper-germanide source/drain contacts are achieved by a thermal activated phase formation process. The Cu(3)Ge segments emerge from the Cu contact pads through axial diffusion of Cu which was controlled in situ by SEM, thus the active channel length of the MOSFET is adjusted without any restrictions from a lithographic process. Finally the conductivity of the channel is enhanced by Ga(+) implantation leading to a high performance Ω-gated Ge-NW MOSFET with saturation currents of a few microamperes.

Focused electron beam induced etching of silicon using chlorine

A new beam-assisted process for removing silicon from a surface in the nanometer scale in a conventional scanning electron microscope is presented. This approach is based on focused electron beam induced etching with pure chlorine gas being used as the precursor. In contrast to the established etching process using a focused ion beam (with or without the addition of a precursor), no amorphization and gallium implanting of the substrate takes place. The observed low etch rates facilitate removal with sub-nanometer precision. No spontaneous etching of silicon as in the case of xenon difluoride was observed. Etch rates of up to 4 nm min( - 1) could be achieved as well as a minimum feature size of below 80 nm. The effect of etching parameters like electron beam energy, electron beam accelerating voltage or pixel spacing were systematically examined. Finally, the underlying etching mechanism in terms of secondary electron interactions and precursor replenishment is discussed.

Atomic scale alignment of copper-germanide contacts for ge nanowire metal oxide field effect transistors

In this letter, we report on the formation, of copper-germanide/germanium nanowire (NW) heterostructures with atomically sharp interfaces. The copper-germanide (Cu3Ge) formation process is enabled by a chemical reaction between metallic Cu pads and vapor-liquid-solid (VLS) grown Ge-NWs. The atomic scale aligned formation of the Cu3Ge segments is controlled by in situ SEM monitoring at 310 degrees C thereby enabling length control of the intrinsic Ge-NW down to a few nanometers. The single crystal Cu3Ge/Ge/Cu3Ge heterostructures were used to fabricate p-type Ge-NW field effect transistors with Schottky Cu3Ge source/drain contacts. Temperature dependent I /V measurements revealed the metallic properties of the Cu3Ge contacts with a maximum current density of 5 x 10(7) A/cm2. According to the thermoionic emission theory, we determined an effective Schottky barrier height of 218 meV.