Surface modification of poly(dimethylsiloxane) microfluidic devices by ultraviolet polymer grafting

Poly(dimethylsiloxane) (PDMS)-based microfluidic devices are increasing in popularity due to their ease of fabrication and low costs. Despite this, there is a tremendous need for strategies to rapidly and easily tailor the surface properties of these devices. We demonstrate a one-step procedure to covalently link polymers to the surface of PDMS microchannels by ultraviolet graft polymerization. Acrylic acid, acrylamide, dimethylacrylamide, 2-hydroxylethyl acrylate, and poly(ethylene glycol)monomethoxyl acrylate were grafted onto PDMS to yield hydrophilic surfaces. Water droplets possessed contact angles as low as 45 degrees on the grafted surfaces. Microchannels constructed from the grafted PDMS were readily filled with aqueous solutions in contrast to devices composed of native PDMS. The grafted surfaces also displayed a substantially reduced adsorption of two test peptides compared to that of oxidized PDMS. Microchannels with grafted surfaces exhibited electroosmotic mobilities intermediate to those displayed by native and oxidized PDMS. Unlike the electroosmotic mobility of oxidized PDMS, the electroosmotic mobility of the grafted surfaces remained stable upon exposure to air. The electrophoretic resolution of two test peptides in the grafted microchannels was considerably improved compared to that in microchannels composed of oxidized PDMS. By using the appropriate monomer, it should be possible to use UV grafting to impart a variety of surface properties to PDMS microfluidics devices.

Surface-Directed, Graft Polymerization within Microfluidic Channels

We demonstrate a simple procedure to coat the surfaces of enclosed PDMS microchannels by UV-mediated graft polymerization. In prior applications, only disassembled channels could be coated by this method. This limited the utility of the method to coatings that could easily and tightly seal with themselves. By preadsorbing a photoinitiator onto the surface of PDMS microchannels, the rate of polymer formation at the surface was greatly accelerated compared to that in solution. Thus, a gel did not form in the lumen of enclosed microchannels. We demonstrate that the photoinitiator benzophenone remained on the surface of PDMS even after extensive washing. After addition of a variety of monomer solutions (acrylic acid, poly(ethylene glycol) monomethoxyl acrylate, or poly(ethylene glycol) diacrylate) and illumination with UV light, a stable, covalently attached surface coating formed in the microchannels. The electroosmotic mobility was stable in response to air exposure and to repeated cycles of hydration-dehydration of the coating. These surfaces also supported the electrophoretic separation of two model analytes. Placement of an opaque mask over a portion of the channel permitted photopatterning of the microchannels with a resolution of approximately 100 microm. By using an appropriate mixture of monomers combined with masks, it should be possible to fabricate PDMS microfluidic devices with distinct surface properties in different regions or channels.

Covalent micropatterning of poly(dimethylsiloxane) by photografting through a mask

A new photografting method to micropattern a covalent surface modification on poly(dimethylsiloxane) (PDMS) provides advantages in simplicity and efficiency. To accomplish the entire process on the benchtop, the PDMS was initially treated with benzophenone dissolved in a water/acetone mixture. This process permitted limited diffusion of the photoinitiator into the PDMS surface. Polymerization of acrylic acid was initiated by exposure of the benzophenone-implanted PDMS to UV radiation through a photomask with a thin aqueous layer of acrylic acid sandwiched between the PDMS and photomask. This procedure resulted in patterned poly(acrylic acid) (PAA) on the PDMS surface. In the modified regions, PAA and PDMS formed an interpenetrating polymer network extending 50 microm into the PDMS with an X-Y spatial resolution of 5 microm. The carboxyl groups of the PAA graft could be derivatized to covalently bond other molecules to the patterned PAA. Two bioanalytical applications of this micropatterned surface were demonstrated: (1) a guide for cell attachment and growth and (2) a substrate for immunoassays. 3T3 cells were shown to selectively localize to modified surface regions where they could be cultured for up to 7 days. Additionally, the micropatterned surface was used to immobilize either protein A or antibody for heterogeneous immunoassays.

Electroosmotic properties of microfluidic channels composed of poly(dimethylsiloxane)

Microfluidic devices fabricated from polymers exhibit great potential in biological analyses. Poly(dimethylsiloxane) (PDMS) has shown promise as a substrate for rapid prototyping of devices. Despite this, disagreement exists in the literature as to the ability of PDMS to support electroosmotic (EO) flow and the stability of that flow over time. We demonstrate that in low ionic strength solutions near neutral in pH. oxidized PDMS had a four-fold greater EO mobility (mu(eo)) compared to native PDMS. The greater mu(eo) was maintained irrespective of whether glass or PDMS was used as a support forming one side of the channel. This enhanced mu(eo) was preserved as long as the channels were filled with an aqueous solution. Upon exposure of the channels to air, the mobility decreased by a factor of two with a half-life of 9 h. The EO properties of the air-exposed, oxidized PDMS were regenerated by exposure to strong base. High ionic strength, neutral in pH buffers compatible with living eukaryotic cells diminished the EO flow in the oxidized PDMS devices to a much greater extent than in the native PDMS devices. For analyses utilizing intact and living cells, oxidation of PDMS may not be an effective strategy to substantially increase the mu(eo).

Mutagenesis of the in-frame opal termination codon preceding nsP4 of Sindbis virus: studies of translational readthrough and its effect on virus replication

Sindbis virus (SIN) contains an in-frame opal termination codon in the nonstructural protein-coding region separating nsP3 and nsP4 and provides a useful tool to study the readthrough phenomenon of the termination codon in host cells and its role in viral replication. We have changed the opal codon by site-directed mutagenesis of a full-length SIN cDNA clone to either sense amino acids (serine, tryptophan, or arginine) or the other two translation termination codons (amber or ochre). Transcripts from all of the mutant cDNA clones were infectious when used to transfect chicken embryo fibroblasts. The resulting progeny virus stocks were then used to study the effects of these mutations on viral protein and RNA synthesis, growth properties, host range, and fitness compared with the parental strain. None of the mutants showed temperature sensitivity in plaquing efficiency or plaque morphology on chicken embryo fibroblast monolayers. Relative to the wild-type parent, the mutants containing sense replacements overproduced nsP34 but not nsP4 and made slightly decreased levels of nsP3, with a delay in its appearance. This indicates that the cleavage separating nsP3 and nsP4 occurs in these mutants and also that the level of nsP4 is not regulated solely by readthrough of the opal codon. The amber and ochre mutants produced decreased levels of nsP34, and the ochre mutant grew significantly more slowly than the other mutants or wild-type virus. For all five mutants, RNA synthesis early in infection was inhibited compared with that of the parental virus. This effect was apparent at multiplicities of infection of 20 PFU per cell but not at 100 PFU per cell. Using in situ hybridization to distinguish between mutant and wild-type plaques, we have studied the behavior of the serine mutant in a high-multiplicity growth competition experiment with wild-type virus. The wild-type virus eventually outcompeted the mutant after several passages, and these results indicate that this mutation has resulted in effects that are at least partially cis acting. Furthermore, by studying the growth, plaque formation, and protein synthesis of the mutants in various cell types, we have observed host range effects of the mutations, especially in mosquito and human cells. In addition, we have demonstrated, at least indirectly, that opal, amber, and ochre termination codons in the SIN nucleotide context can be suppressed in cultured cells of chicken, human, hamster, and mosquito origin.

Phosphorylation of Sindbis virus nsP3 in vivo and in vitro

nsP3 is one of four viral nonstructural proteins required for RNA replication of Sindbis virus. In this report, post-translational modifications of nsP3 which occur in both vertebrate and mosquito cell cultures have been examined. In pulse-chase experiments, analyzed by immunoprecipitation and sodium dodecyl sulfate-polyacrylamide gel electrophoresis, nsP3 was initially observed as a single species (termed nsP3a, approximately 76 kDa) which was gradually converted to slower mobility forms ranging from 78 kDa (termed nsP3b) to 106 kDa (termed nsP3c). The slower mobility forms, but not nsP3a or the other nonstructural proteins, could be labeled in vivo with [32P]orthophosphate. Treatment of nsP3 immunoprecipitates with calf intestinal alkaline phosphatase converted the slower mobility forms to nsP3a. Phosphoamino acid analysis of nsP3b and nsP3c demonstrated that both contained phosphoserine and phosphothreonine but not phosphotyrosine, nsP34, a polyprotein produced by readthrough of the in-frame opal codon preceding nsP4, was also phosphorylated on serine and threonine residues. nsP3 phosphorylation did not require ongoing RNA synthesis since phosphorylated forms were also observed in the absence of Sindbis-specific RNA synthesis. Furthermore, when immunoprecipitates of nsP3 were incubated with [gamma-32P]ATP in the presence of Mg2+ or Mn2+, a kinase activity which was able to phosphorylate nsP3 on serine and threonine residues in vitro was detected. This kinase activity was inhibited by heparin, was activated by spermidine, and could utilize GTP and ATP as the phosphate donor. These latter properties are similar to those of cellular casein kinase II. Although it is possible that this nsP3-associated kinase is of cellular origin, autophosphorylation of nsP3 has not been excluded.

Radiographic and histologic analyses of stress fracture in rabbit tibias

Sequential changes in remodeling of the internal structure of the tibia caused by controlled, excessive jumping and running were studied in 20 rabbits. Vascular changes and circulatory disturbances within the cortical bone occurred before osteoclastic resorption. Degeneration and necrosis of osteocytes due to circulatory disturbances also occurred. Periosteal new bone formation, found at and after 12 days of the experiment, was a compensatory reaction to support the tibia weakened by accelerated osteoclastic resorption. Small cracks appeared at the cement line and developed through the neighboring cement line of the haversian systems. At 21 days, incomplete fracture of the tibial cortex was found in two rabbits. Complete fracture through one side of the cortex was seen in one animal at the 50th day of the experiment. In this study, however, most of the tibias did not have visible fracture lines after a period of stressful exercise. This result suggests that most tibias adapt to changes in stress requirements through proper internal remodeling so that a complete fracture does not occur.

Fast Electrical Lysis of Cells for Capillary Electrophoresis

In the past decade, capillary electrophoresis has demonstrated increasing utility for the quantitative analysis of single cells. New applications for the analysis of dynamic cellular properties demand sampling methods with sufficient temporal resolution to accurately measure these processes. In particular, intracellular signaling pathways involving many enzymes can be modulated on subsecond time scales. We have developed a technique to rapidly lyse an adherent mammalian cell using a single electrical pulse followed by efficient loading of the cellular contents into a capillary. Microfabricated electrodes were designed to create a maximum voltage drop across the flattened cell's plasma membrane at a minimum interelectrode voltage. The influence of the interelectrode distance, pulse duration, and pulse strength on the rate of cell lysis was determined. The ability to rapidly lyse a cell and collect and separate the cellular contents was demonstrated by loading cells with Oregon Green and two isomers of carboxyfluorescein. All three fluorophores were detected with a separation efficiency comparable to that of standards. Parallel comparison of electrical lysis to that produced by a laser-based lysis system revealed that the sampling efficiencies of the two techniques were comparable. Rapid cell lysis by an electrical pulse may increase the application of capillary electrophoresis to the study of cellular dynamics requiring fast sampling times.

Photoresist with low fluorescence for bioanalytical applications

The negative photoresist SU-8 has found widespread use as a material in the fabrication of microelectrical-mechanical systems (MEMS). Although SU-8 has been utilized as a structural material for biological MEMS, a number of SU-8 properties limit its application in these bioanalytical devices. These attributes include its brittleness, nonspecific adsorption of biomolecules, and high fluorescence in the visible wavelengths. In addition, native SU-8 is a poor substrate for cellular adhesion. Photoresists composed of resins with epoxide side groups and photoacids were screened for their ability to serve as a low-fluorescence photoresist with sufficient resolution to generate microstructures with dimensions of 5-10 microm. The fluorescence of structures formed from 1002F photoresist (1002F resin combined with triarylsulfonium hexafluoroantimonate salts) was as much as 10 times less fluorescent than similar SU-8 microstructures. The absorbance of 1002F in the visible wavelengths was also substantially lower than that of SU-8. Microstructures or pallets with an aspect ratio as high as 4:1 could be formed permitting 1002F to be used as a structural material in the fabrication of arrays of pallets for sorting adherent cells. Several different cell types were able to adhere to native 1002F surfaces, and the viability of these cells was excellent. As with SU-8, 1002F has a weak adhesion to glass, a favorable attribute when the pallet arrays are used to sort adherent cells. A threshold, laser pulse energy of 3.5 microJ was required to release individual 50 microm, 1002F pallets from an array. Relative to SU-8, 1002F photoresist offers substantial improvements as a substrate in bioanalytical devices and is likely to find widespread use in BioMEMS.

Micropallet Arrays for the Separation of Single, Adherent Cells

The selection and collection of single cells from within a heterogeneous population is required to produce genetically engineered cell lines, to develop new stem cell lines, and for single-cell studies. We describe a new platform for the positive selection of single live mammalian cells while the cells remain adherent to their growth surface. Cells were grown on arrays of microfabricated, releasable elements composed of SU-8 polymer termed "cell pallets". The presence of air between the elements restricted the cells to the top surfaces of the pallets. Single pallets situated within large arrays of pallets were released on demand using a single, focused, laser pulse. The laser pulses were low in energy (2-5 muJ) and did not detach nearby, nontargeted pallets. Since the SU-8 pallets and the underlying glass substrate were optically transparent, the cells on the pallets could be visualized by microscopy before and after release. Over 90% of cells remained attached to the pallet during laser-based release. The feasibility of growing the cells from the released pallets into clonal colonies was demonstrated. The pallet array system permits adherent cells to be inspected using conventional microscopy and selected cells released for further analysis. The ability to assess cells while they remain adherent to a surface will broaden the number of attributes that can be utilized for cell separation, for example, cell shape, cytoskeletal properties, and other attributes.

Permeability of cortical bone of canine tibiae

Movement of interstitial fluid in cortical bone is considered one of the important mechanisms affecting bone remodeling and fracture healing. To better understand such interstitial fluid movement, the hydrostatic permeability of cortical bone of the canine tibia was measured in this study. It was found that age has significant influence on permeability. The cortical bone permeability of puppy tibiae is six times higher than that of adult tibiae. Adult tibial cortex is impermeable unless the superficial layer of the periosteal cortex is removed. The permeability differs between regions and locations of the tibia. The pathways for such extravascular interstitial fluid movement were also identified to be primarily the haversian and Volkmann's canals and secondarily the canalicular and lacunar spaces. The high permeability of their cortical bone may explain the increase in periosteal new bone formation seen in puppies when a venous tourniquet is applied.

Cross-linked coatings for electrophoretic separations in poly(dimethylsiloxane) microchannels

We have developed a strategy using ultraviolet light to polymerize mixed monomer solutions onto the surface of a poly(dimethylsiloxane) (PDMS) microdevice. By including monomers with different chemical properties, electrophoretic separations were optimized for a test set of analytes. The properties of surfaces grafted with a single neutral monomer, a neutral and a negative monomer, or a neutral, negative, and cross-linking monomer were assessed. The highest quality separations were achieved in channels with cross-linked coatings. The separation efficiency for biologically relevant peptides (kinase substrates) on these surfaces was as high as 18 600 theoretical plates in a 2.5 cm channel. The test peptides were fluorescein-AEEEIYGEFEAKKKK, fluorescein-GRPRAATFAEG, fluorescein-GRPRAA(T-PO(3))FAEG, fluorescein-DLDVPIP GRFDRRVSVAAE, and fluorescein-DLDVPIPGRFDRRV(S-PO(3))VAAE. Separations between two different peptides occurred in as little as 400 ms after injection into the separation channel. The simultaneous separation of five kinase and phosphatase substrates was also demonstrated. By carefully selecting mixtures of monomers with the appropriate properties, it may be possible to tailor the surface of PDMS for a large number of different electrophoretic separations.

Micropatterning of living cells on a heterogeneously wetted surface

We report a simple approach to fabricate heterogeneously wetted surfaces which can be used to pattern living cells or biomolecules. An array of pedestals composed of SU-8 was fabricated on a glass surface which was then derivatized with a hydrophobic silane. Upon addition of aqueous solutions to the array, air was trapped within the hydrophobic cavities between the pedestals. The trapped air formed a "virtual wall" blocking access to these cavities. Cells cultured on the array were forced to grow only on the tops of the pedestals, i.e., the surfaces wetted by aqueous media. The virtual walls were stable during manipulation of the array and over long time periods (months).

In vitro fertilisation of mouse oocytes reconstructed by transfer of metaphase II chromosomes results in live births

The interaction between nucleus and cytoplasm can be explored through nuclear transfer. We describe here another tool to investigate this interaction: MII meiotic apparatus transfer (MAT) between mouse oocytes. In this study, the MII oocyte meiotic apparatus or spindle from C57BL/6 mice, a black strain, was transferred into an enucleated metaphase oocyte from Kunming mouse, a white strain. The results showed that the enucleation rate by treating oocytes with 3% sucrose was 100%, but the electrofusion efficiency was very low, with only 17.6% of reconstructed karyoplast-recipient cytoplasm pairs fused. When the fused oocytes were exposed to spermatozoa from C57BL/6 mice, 9 of 11 (82%) were fertilised. Eight reconstructed embryos at 1- to 4-cell stages were transferred into the oviducts of two synchronously pregnant Kunming strain fosters and one delivered two normal C57BL/6 offspring. This study indicates that MII meiotic apparatus or spindle sustains normal structure and function after micromanipulation and electrofusion. MAT provides a model for further research on the application of this technique to assisted human reproduction.

Collection and Expansion of Single Cells and Colonies Released from a Micropallet Array

The ability to selectively grow out individual cells possessing unique characteristics from within a mixed population is of widespread importance for biomedical investigations. Generation of genetically engineered cell lines, transformation studies, cell-based assays, and stem cell studies are examples where single-cell cloning is of immense value. The vast majority of mammalian cells grow adherent to a surface; therefore, positive selection followed by cloning of cells while the cells remain adherent to their growth surface is an important goal. We recently demonstrated a microfabricated cell array combined with laser-based release of individual array elements for positive selection of single cells. In the current work, a strategy to collect single cells for clonal expansion is described. The system enabled cloning of individual cells with 80-90% efficiency. Single cells were selected and cloned from small populations of fewer than 10,000 cells. Strategies used by cells to migrate from the pallets to form colonies on the surface of the collection device were examined. Implementation of encoded array elements made it possible to follow specific cells throughout the selection, collection, and cloning procedure. Thus, a particular cell can be identified by any number of imaging techniques, isolated, and clonally expanded to generate a homogeneous cell line or a pure sample for genetic or biochemical analysis.

Viable rabbits derived from reconstructed oocytes by germinal vesicle transfer after intracytoplasmic sperm injection (ICSI)

Abnormal oocyte spindle due to the improper function of ooplasm is associated with female infertility of advanced maternal age. A possible way to overcome this problem is to transfer an oocyte germinal vesicle (GV) which contains genetic materials of a patient with a history of poor embryo development to the cytoplast from a donor oocyte. Here we demonstrate that GV transfer is feasible using a rabbit model. When the GVs were transferred to auto- or hetero-cytoplasts of GV stage oocytes, around 80% of the reconstructed oocytes could mature in vitro and 7.1-9.4% of the oocytes developed to blastocyst stage after intracytoplasmic sperm injection (ICSI). Transfer of 93 fertilized eggs reconstructed via GV transfer into six recipients resulted in two live offspring. Results of this experiment indicate that GV transfer can potentially become a new approach in treatment of infertility because of advanced maternal age.

Tailoring the surface properties of poly(dimethylsiloxane) microfluidic devices

Poly(dimethylsiloxane) (PDMS) is an attractive material for microelectrophoretic applications because of its ease of fabrication, low cost, and optical transparency. However, its use remains limited compared to that of glass. A major reason is the difficulty of tailoring the surface properties of PDMS. We demonstrate UV grafting of co-mixed monomers to customize the surface properties of PDMS microfluidic channels in a simple one-step process. By co-mixing a neutral monomer with a charged monomer in different ratios, properties between those of the neutral monomer and those of the charged monomer could be selected. Mixtures of four different neutral monomers and two different charged monomers were grafted onto PDMS surfaces. Functional microchannels were fabricated from PDMS halves grafted with each of the different mixtures. By varying the concentration of the charged monomer, microchannels with electrophoretic mobilities between +4 x 10(-4) cm2/(V s) and -2 x 10(-4) cm2/(V s) were attainable. In addition, both the contact angle of the coated surfaces and the electrophoretic mobility of the coated microchannels were stable over time and upon exposure to air. By carefully selecting mixtures ofmonomers with the appropriate properties, it may be possible to tailor the surface of PDMS for a large number of different applications.

Simple photografting method to chemically modify and micropattern the surface of SU-8 photoresist

SU-8 has gained widespread acceptance as a negative photoresist. It is also finding increasing use as a structural material in microanalytical devices. Consequently, methods to tailor the surface properties of SU-8 as well as to micropattern coatings on the surface of SU-8 are needed. The SU-8 photoresist consists of EPON SU-8 resin mixed with the photoacid generator triarylsulfonium hexafluoroantimonate. This photoacid generator can also serve as a photoinitiator generating free radicals when illuminated with UV light. Under the appropriate conditions, sufficient triarylsulfonium hexafluoroantimonate remains within cured SU-8 to act as a source of free radicals and initiate UV-mediated grafting of polymers onto the surface of the SU-8. UV-mediated grafting was used to coat SU-8 surfaces with poly(acrylic acid) and other water-soluble monomers. The SU-8 surface was chemically micropatterned by placing a mask between the UV light and SU-8. The X-Y spatial resolution of micropatterned poly(acrylic acid) on the SU-8 surface was 2 mum. Three applications of these chemically modified SU-8 surfaces were demonstrated. In the first, poly(ethylene glycol) was used to protect the SU-8 from interactions with proteins, yielding a surface resistant to biofouling. In the second demonstration, the SU-8 surface was micropatterned with a cell-resistant layer to guide cellular attachment and growth. In the final application, SU-8 micropallets were encoded with polymer lines. The bar codes were read by either absorbance or fluorescence measurements. Thus, UV-mediated graft polymerization is an efficient and effective method to micropattern coatings onto the surface of SU-8.

Broadening cell selection criteria with micropallet arrays of adherent cells

A host of technologies exists for the separation of living, nonadherent cells, with separation decisions typically based on fluorescence or immunolabeling of cells. Methods to separate adherent cells as well as to broaden the range of possible sorting criteria would be of high value and complementary to existing strategies. Cells were cultured on arrays of releasable pallets. The arrays were screened and individual cell(s)/pallets were released and collected. Conventional fluorescence and immunolabeling of cells were compatible with the pallet arrays, as were separations based on gene expression. By varying the size of the pallet and the number of cells cultured on the array, single cells or clonal colonies of cells were isolated from a heterogeneous population. Since cells remained adherent throughout the isolation process, separations based on morphologic characteristics, for example cell shape, were feasible. Repeated measurements of each cell in an array were performed permitting the selection of cells based on their temporal behavior, e.g. growth rate. The pallet array system provides the flexibility to select and collect adherent cells based on phenotypic and temporal criteria and other characteristics not accessible by alternative methods.

Effect of the time interval between fusion and activation on nuclear state and development in vitro and in vivo of bovine somatic cell nuclear transfer embryos

This study indicated that prolonged exposure of donor cell nuclei to oocyte cytoplasm before activation results in abnormal chromatin morphology, and reduced development to compacted morula/blastocyst stage in vitro. However, after transfer of embryos to recipients, there was no difference in pregnancy rates throughout gestation. Chromatin morphology was evaluated for embryos held 2, 3, 4 and 5 h between fusion and activation. In embryos held 2 h, 15/17 (88.2%) embryos contained condensed chromosomes, while only 12/24 (50.0%) embryos held 3 h exhibited this characteristic. The proportion of embryos with elongated or fragmented chromosomes tended to increase with increased hold time. While 15/19 (78.9%) of embryos held 2 h developed a single pronucleus 6 h after activation, only 8/22 (36.4%) had one pronucleus after a 4-h hold. Embryos held 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 and 4.0 h cleaved at rates of 207/281 (73.7%), 142/166 (85.5%), 655/912 (71.8%), 212/368 (57.6%), 406/667 (60.9%), 362/644 (56.2%) and 120/228 (52.6%) respectively. Further development to compacted morula/blastocyst stage occurred at rates of 78/281 (27.8%), 42/166 (25.3%), 264/912 (28.9%), 79/368 (21.5%), 99/667 (14.8%), 94/644 (14.6%) and 27/228 (11.8%) respectively. Embryos held less than 2.5 h between fusion and activation established pregnancies in 18/66 (27.3%) of recipients, while embryos held over 2.5 h established pregnancies at a rate of 17/57 (29.8%). This study indicates that holding bovine nuclear transfer embryos less than 2.5 h between fusion and activation results in improved nuclear morphology and increased development to compacted morula/blastocyst stage, and results in pregnancy rates equivalent to embryos held over 2.5 h.

Characterization and use of laser-based lysis for cell analysis on-chip

We demonstrate the use of a pulsed laser microbeam for cell lysis followed by electrophoretic separation of cellular analytes in a microfluidic device. The influence of pulse energy and laser focal point within the microchannel on the threshold for plasma formation was measured. The thickness of the poly(dimethylsiloxane) (PDMS) layer through which the beam travelled was a critical determinant of the threshold energy. An effective optical path length, Leff, for the laser beam can be used to predict the threshold for optical breakdown at different microchannel locations. A key benefit of laser-based cell lysis is the very limited zone (less than 5 microm) of lysis. A second asset is the rapid cell lysis times (approx. microseconds). These features enable two analytes, fluorescein and Oregon Green, from a cell to be electrophoretically separated in the channel in which cell lysis occurred. The resolution and efficiency of the separation of the cellular analytes are similar to those of standards demonstrating the feasibility of using a pulsed laser microbeam in single-cell analysis.