Blood compatibility of iron-doped nanosize hydroxyapatite and its drug release

Nanosize hydroxyapatite (nHAp) doped with varying levels of Fe(3+) (Fe-nHAp of average size 75 nm) was synthesized by hydrothermal and microwave techniques. The samples were characterized for physiochemical properties by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), inductively coupled plasma optical emission spectrometer (ICP-OES), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), mechanical and dielectric properties. The biological properties like hemocompatibility, antibacterial efficacy, in vitro bioactivity and the cell proliferation of the samples were determined. XRD pattern of the samples were of single phase hydroxyapatite. As the content of Fe(3+) increased, the crystallite size as well as crystallinity decreased along with a morphological change from spherulites to rods. The dielectric constants and Vickers hardness were enhanced on Fe(3+) doping. The VSM studies revealed that the saturation magnetization (M(s)) and retentivity (M(r)) were found to increase for Fe-nHAp. nHAp impregnated with an antibiotic as a new system for drug delivery in the treatment of chronic osteomyelitis was also attempted. The in vitro drug release with an antibiotic amoxicillin and anticancer drug 5-fluorouracil showed sustained release for the lowest concentration of Fe(3+), while with an increase in the content; there was a rapid release of the drug. The hemolytic assay of Fe(3+) doped samples revealed high blood compatibility (<5% hemolysis). The antibacterial activities of the antibiotic impregnated materials were tested against a culture of E. coli, S. epidermidis and S. aureus by agar diffusion test. The in vitro bioactivity test using simulated body fluid (SBF) showed better bone bonding ability by the formation of an apatite layer on the doped samples. The growth of the apatite layer on the samples surface has been confirmed by EDS analysis. The proliferative potential of MG63 cells by MTT assay confirmed the noncytotoxicity of the samples.

Biodiesel production from castor oil using heterogeneous Ni doped ZnO nanocatalyst

In the present study, castor oil with high free fatty acid was used for biodiesel production using heterogeneous Ni doped ZnO nanocatalyst. Ni doped ZnO nanocomposite calcinated at 800 °C has shown better catalytic activity. Process parameters on heterogeneous catalysis of castor oil into biodiesel were optimized using conventional and Response Surface Methodology (RSM). RSM was found more accurate in estimating the optimum conditions with higher biodiesel yield (95.20%). The optimum conditions for transesterification was found to be oil to methanol molar ratio of 1:8, catalyst loading 11% (w/w), reaction temperature of 55 °C for 60 min of reaction time by response surface method. The reusability studies showed that the nanocatalyst can be reused efficiently for 3 cycles.

Molecular mechanism of anti-cancer activity of phycocyanin in triple-negative breast cancer cells

Background

Triple-negative breast cancers represent an important clinical challenge, as these cancers do not respond to conventional endocrine therapies or other available targeted agents. Phycocyanin (PC), a natural, water soluble and non-toxic molecule is shown to have potent anti-cancer property.

Methods

In this study, we determined the efficacy of PC as an anti-neoplastic agent in vitro on a series of breast cancer cell lines. We studied effects of PC in inducing DNA damage and apoptosis through western blot and qPCR. Also, anti-metastatic and anti-angiogenic properties were studied by classic wound healing and vasculogenic mimicry assays.

Results

We found that triple negative MDA-MB-231 cells were most sensitive to PC (IC50 : 5.98 ± 0.95 μM) as compared to other cells. They also showed decreased cell proliferation and reduced colony formation ability upon treatment with PC. Profile of Cell cycle analysis showed that PC caused G1 arrest which could be attributed to decreased mRNA levels of Cyclin E and CDK-2 and increased p21 levels. Mechanistic studies revealed that PC induced apoptosis as evident by increase in percentage of annexin positive cells, increase in γ-H2AX levels, and by changing the Bcl-2/Bax ratio followed by release of cytochrome C and increased Caspase 9 levels. MDA MB 231 cells treated with PC resulted in decreased cell migration and increased cell adhesive property and also showed anti-angiogenic effects. We also observed that PC suppressed cyclooxygenase-2 (COX-2) expression and prostaglandin E(2) production. All these biological effects of phycocyanin on MDA MB 231 cells could be attributed to decreased MAPK signaling pathway. We also observed that PC is non-toxic to non-malignant cells, platelets and RBC’s.

Conclusion

Taken together, these findings demonstrate, for the first time, that PC may be a promising anti-neoplastic agent for treatment of triple negative breast cancers.

Electronic supplementary material

The online version of this article (doi:10.1186/s12885-015-1784-x) contains supplementary material, which is available to authorized users.

Nanomedicine: towards development of patient-friendly drug-delivery systems for oncological applications

The focus on nanotechnology in cancer treatment and diagnosis has intensified due to the serious side effects caused by anticancer agents as a result of their cytotoxic actions on normal cells. This nonspecific action of chemotherapy has awakened a need for formulations capable of definitive targeting with enhanced tumor-killing. Nanooncology, the application of nanobiotechnology to the management of cancer, is currently the most important area of nanomedicine. Currently several nanomaterial-based drug-delivery systems are in vogue and several others are in various stages of development. Tumor-targeted drug-delivery systems are envisioned as magic bullets for cancer therapy and several groups are working globally for development of robust systems.

Anticancer activity of fungal L-asparaginase conjugated with zinc oxide nanoparticles

Demand for developing novel delivery system for cancer treatment has increased due to the side effects present in intravenous injection of L-asparaginase. Nanoparticles are used for delivering the drugs to its destination in cancer cure. Nanobiocomposite of zinc oxide nanoparticles conjugated with L-asparaginase was produced by Aspergillus terreus and was confirmed using maximum UV-Vis absorption at 340 nm in the present work. The presence of functional groups like OH, C-H, -C=N and C=O on the surface of nanobiocomposite was found from Fourier transform infrared spectrum analysis. Size of the produced nanocomposite was found in the range of 28-63 nm using scanning electron microscope. The crystalline nature of the synthesized nanobiocomposites was confirmed by X-ray diffraction analysis. The presence of zinc oxide on synthesized nanobiocomposite was confirmed by energy dispersive spectrum analysis. The anti-cancerous nature of the synthesized zinc oxide conjugated L-asparaginase nanobiocomposite on MCF-7 cell line was studied using MTT assay. The viability of the MCF-7 cells was decreased to 35.02 % when it was treated with L-asparaginase conjugated zinc oxide nanobiocomposite. Hence it is proved that the synthesized nanobiocomposites of zinc oxide conjugated L-asparaginase has good anti-cancerous activity.

Process optimization and kinetic analysis of malic acid production from crude glycerol using Aspergillus niger

In the present work, optimization of crude glycerol fermentation to produce malic acid by using Aspergillus niger was investigated using response surface methodology and artificial neural network. Kinetic investigation of bioconversion of crude glycerol into malic acid using Aspergillus niger was studied using Monod, Mosser, and Haldane-Andrew models. Crude glycerol concentration, initial pH and yeast extract concentration were found to be significant compounds affecting malic acid production by Aspergillus niger. Both dry cell weight and malic acid titre were found decreased with increase in crude glycerol concentration. Haldane-Andrew model gave the best fit for the production of malic acid from crude glycerol with µ_max of 0.1542 h^-1. The maximum malic acid production obtained under optimum conditions was 92.64 + 1.54 g/L after 192 h from crude glycerol using Aspergillus niger.

Malic acid production from biodiesel derived crude glycerol using morphologically controlled Aspergillus niger in batch fermentation

In the present investigation, the effects of crude glycerol concentration, spore inoculum concentration, yeast extract concentration and shaking frequency on seed morphology of Aspergillus niger PJR1 on malic acid production were investigated and dispersed fungal mycelium with higher biomass (20.25 ± 0.91 g/L) was obtained when A. niger PJR1 grow on crude glycerol. Dry cell weight under dispersed fermentation was 21.28% higher than usual pellet fermentation. The optimal crude glycerol, nitrogen source and nitrogen source concentration were found to be 160 g/L, yeast extract and 1.5 g/L, respectively. Batch fermentation in a shake flask culture containing 160 g/L crude glycerol resulted in the yield of malic acid 83.23 ± 1.86 g/L, after 192 h at 25 °C. Results revealed that morphological control of A. niger is an efficient method for increased malic acid production when crude glycerol derived from biodiesel production is used as feedstock.

Process optimization, green chemistry balance and technoeconomic analysis of biodiesel production from castor oil using heterogeneous nanocatalyst

In the present work, zinc doped calcium oxide was used as a nanocatalyst for biodiesel production from castor oil. The optimal conditions of biodiesel conversion and green chemistry balance were obtained with response surface methodology. Five green chemistry parameters like carbon efficiency, atom economy, reaction mass efficiency, stoichiometric factor and environmental factor were optimized. The sustainable biodiesel yield 84.9% and green chemistry balance 0.902 was achieved at methanol to oil molar ratio 10.5:1, temperature 57 °C, time 70 min, and catalyst concentration 2.15%. The synthesized biodiesel was characterized by GCMS and FTIR, and physic-chemical properties were determined. Based on experimental study annually 20.3 million kg capacity plant was simulated using SuperPro designer. The sensitivity analysis of oil purchase cost and biodiesel selling price on ROI, payback period, IRR and NPV were investigated. The optimization and technoeconomic analysis provided a sustainable platform for commercial based biodiesel production.

Malic acid production by chemically induced Aspergillus niger MTCC 281 mutant from crude glycerol

In the present investigation, crude glycerol derived from transesterification process was utilized to produce the commercially-valuable malic acid. A combined resistant on methanol and malic acid strain of Aspergillus niger MTCC 281 mutant was generated in solid medium containing methanol (1-5%) and malic acid (40-80 g/L) by the adaptation process for 22 weeks. The ability of induced Aspergillus niger MTCC 281 mutant to utilize crude glycerol and pure glycerol to produce malic acid was studied. The yield of malic acid was increased with 4.45 folds compared with that of parent strain from crude glycerol. The highest concentration of malic acid from crude glycerol by using beneficial mutant was found to be 77.38 ± 0.51 g/L after 192 h at 25 °C. This present study specified that crude glycerol by-product from biodiesel production could be used for producing high amount of malic acid without any pretreatment.

Bioethanol production from palm wood using Trichoderma reesei and Kluveromyces marxianus

In the present work, palm wood was pretreated using hydrothermal technique in conjunction with chemical method for removal of lignin. Pretreated palm wood was subjected to hydrolysis using Trichoderma reesei MTCC 4876. Subsequently bioethanol was produced using palm wood hydrolysate by Kluveromyces marxianus MTCC 1389. RSM was used to identify the non-linear relationship and optimize various process parameters such as parameters such as pH, temperature, agitation rate, substrate concentration and inoculum size for bioethanol production. ANN constructed with 5-2-1 topology was also used to optimize process parameters. The experimental bioethanol yield of 22.90 g/l was obtained at ANN optimum conditions of temperature 45 °C, agitation rate 156 rpm, pH 5, substrate concentration 8% (v/v) and inoculum size 3.2% (v/v).

Ultrasound assisted phytosynthesis of iron oxide nanoparticle

The present work deals with the ultrasound assisted green synthesis of iron oxide nano particle using Coriandrum sativum leaf extract as a reducing agent. The synthesized iron oxide nanoparticle was confirmed by UV spectra. The characterization was done to know more about morphology and size of the particle by SEM analysis which shows spherical particles with size ranging from 20 to 90nm. The antimicrobial activity of the leaf extract and the synthesized nanoparticles was studied against the pathogens Micrococcus luteus, Staphylococcus aureus and Aspergillus niger. The ultrasound assisted iron oxide nanoparticle shows higher scavenging activity and antimicrobial activity compared with iron oxide nanoparticle synthesized by magnetic stirrer and Coriandrum sativum leaf extract.

Bioethanol production from woody stem Prosopis juliflora using thermo tolerant yeast Kluyveromyces marxianus and its kinetics studies

In the present study, Kluyveromyces marxianus was utilized to study the batch fermentation kinetics of biomass production, substrate utilization and bioethanol production from woody stem Prosopis juliflora. The pre-treated substrate was subjected to Simultaneous Saccharification and Fermentation (SSF) under optimised conditions of pH (4.9), temperature (41 °C), substrate concentration 5% (w/v), inoculum concentration 3% (v/v) and the maximum concentration of bioethanol was found to be 21.45 g/l. The experimental data thus obtained from cell growth, substrate utilization and product formation are employed in the determination of kinetic parameters. Biological models such as Logistic model, Hinshelwood model were used for microbial growth and substrate utilization kinetics respectively. In case of product kinetics, Leudking-Piret plot, Gompertz model and Modified Gompertz model were utilised. Based on these models, kinetic parameters like maximum specific growth rate (µm), saturation constant (Ks), growth associated (α), non-growth associated (β) and yield coefficients (Y_X/S, Y_P/S) were estimated.

Biodiesel production from Calophyllum inophyllum oil using zinc doped calcium oxide (Plaster of Paris) nanocatalyst

The present study was mainly focused on the production of biodiesel from Calophyllum inophyllum oil. The oil was characterized by GC-MS and stored for biodiesel production. The heterogeneous catalyst was synthesized for effective production of biodiesel. The synthesized catalyst was found to have good activity and stability. The surface and element characterization of zinc doped calcium oxide was characterized by SEM and EDAX. The size of nanocomposite was found to be in the range of 14.3-65.6 nm. The EDAX has confirmed the presence of zinc on the surface of the calcium oxide. The maximum biodiesel yield of 89.0% (v/v) was obtained at 55 °C in 80 min and catalyst concentration of 6% (w/v). The optimized methanol:oil molar ratio was obtained at 9:1 for the production of biodiesel. The produced methyl ester was confirmed by GC-MS analysis.

Synthesis, characterization and synergistic activity of cerium-selenium nanobiocomposite of fungal l-asparaginase against lung cancer

Cerium selenium nanobiocomposites are novel lung cancer drug as they possess combined anti-cancer property of nanocomposite with l-asparaginase working in synergetic manner. Cerium selenium nanobiocomposites were synthesized using simple co-precipitation method. The size of the nanocomposite was found to be in the range 60-90 nm. Maximum absorption was observed using UV spectrum in the range of 350-490 nm. The nanobiocomposites was characterized using H-NMR and FTIR analysis it was found that secondary alkyl, allylic carbon, monosubstituted alkenes and sp² hybridized CH bonds of alkenes were involved in binding of cerium and selenium nanoparticles with l-asparaginase for the formation of cerium selenium nanobiocomposite. The spherical shape of the cerium selenium nanobiocomposites were confirmed using SEM. Anticancer activity was checked by performing MTT assay resulting in 70.84% and 48.78% toxicity for maximum concentration of 1000 (μg/ml) and IC₅₀ concentration of 125 (μg/ml) respectively on A549 lung cancer cell line using fluorescent microscopic analysis.

Enhanced malic acid production using Aspergillus niger coupled with in situ product recovery

In the present investigation, recovery of malic acid from the fermentation broth was performed by using in situ reactive extraction method employing different combination of amine and solvent systems. Totally six solvent mixtures were tested for toxicity on Aspergillus niger PJR1. Further, effect of solvent mixture concentration on separation of malic acid was investigated. Solvent system consisting of 2 M of trioctylamine in 1-octanol was found to be non-toxic to A. niger PJR1 and resulted in the maximum partition coefficient of 0.75 when the solvent mixture to liquid ratio of 1:2 used. A. niger PJR1 from crude glycerol using in situ reactive batch fermentation resulted in the maximum malic acid titer of 115.67 ± 3.5 g/L with the productivity of 0.53 g/L.h after 216 h. Further, fed batch extractive fermentation with crude glycerol resulted in malic acid titer of 131.48 ± 3.4 g/L with the productivity of 0.45 g/L.h after 288 h. Thus reactive extraction combined with in situ fermentation could become effective method for enhanced malic acid production.

Algal biomass as a source for novel oral nano-antimicrobial agent

In the present study, sulphated polysaccharide Ulvan from Ulva lactuca was used for the synthesis of biogenic Selenium Nanoparticles (SeNPs) conjugate and Mouth rinse was prepared using this conjugate. The synthesis of nanoparticles was confirmed by UV–Visible spectrophotometry and characterized using Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM) and X-ray diffraction (XRD). TEM showed that the average size of the nanoparticle was 85 nm and spherical in shape. Furthermore, nanoparticle conjugates were evaluated for cell viability using MTT assay 3T3-L1 cell line and at 30 µl/ml showed 34% cell viability. The antimicrobial activity of SeNPs mouth rinse was tested against oral pathogens such as Streptococcus mutans, Staphylococcus aureus, Lactobacillus, and Candida albicans and it was effective against all tested microorganism at the concentration of 100 µl/ml. The present study has shown that Ulvan from algal biomass can be a safe and effective source for the development of oral nano-antimicrobial agents.

Synergism of clay with zinc oxide as nanocatalyst for production of biodiesel from marine Ulva lactuca

In the present work, Ulva lactuca, a marine macroalgae was used for the production of biodiesel. The ultrasound assisted extraction of oil from autoclaved algal biomass was found effective with maximum yield. The maximum oil was extracted at optimal conditions of 5% moisture content of algal biomass, 0.15 mm size of biomass, 6:1 solvent: solid ratio, at 55 °C in 140 min. The n-hexane with co-solvent methyl tertbutyl ether has shown higher oil when compared to other co-solvents. The extracted oil was transesterified into biodiesel using silica doped with zinc oxide as novel heterogeneous nanocatalyst. The maximum biodiesel yield of 97.43% was obtained at optimized conditions of 800 °C calcination temperature, 8% catalyst concentration, 9:1 methanol to oil ratio, 55 °C reaction temperature and 50 min reaction time. The kinetics of the transesterification reaction was also studied. The Ulva lactuca was found as a potential source for biodiesel production.

Efficacy of Dipeptide-Coated Magnetic Nanoparticles in Lung Cancer Models Under Pulsed Electromagnetic Field

Lung cancer is the leading cause of cancer deaths and the overall 5-year survival rate is less than 17%. Hyperthermia is an alternative approach for the treatment of lung cancer and is associated with fewer side effects. We employed ironoxide nanoparticles in inducing localized hyperthermia in lung cancer cells using a pulsed electromagnetic field (PEMF). We synthesized, characterized and determined the uptake of dipeptide-coated iron oxide nanoparticles. Further, their ability in inducing localized hyperthermia in PEMF on lung cancer cells was assessed. Results showed nanoparticles are non-cytotoxic and showed enhanced cellular uptake in lung cancer cells. In vivo studies in nude mice lung tumor xenografts confirmed the presence in the tumors. Lung cancer cells pretreated with dipeptide-coated magnetic nanoparticles upon PEMF exposure induced cell death.

Microbial abatement of toluene using Aspergillus niger in upflow bioreactor

Microbial abatement of toluene using Aspergillus niger in coir packed upflow bioreactor was investigated in this study. Toluene degrading microbes were isolated from municipal sewage effluent and identified by 16s rRNA sequencing method. The microbes were cultured in 2% (v/v) toluene input per day, which exhibited 95% removal efficiency with the kinetic correction value (R²) of 0.9024 at the optimum flow rate of about 0.4m³h^-1. Various parameters such as effect of flow rate, column height, elimination capacity and EBRT with removal efficiency for 50 day cycle were also optimized. The plug flow model for toluene degradation was properly expressed and the Monod kinetics constant K_m and r_max values were determined as 2.25gm^-3 and 67.773gm^-3h^-1 respectively for microbial growth rate.