Control of the wetting properties of ^{4}He crystals in superfluid

To investigate whether it is possible to control the wetting of ^{4}He crystals on a wall in superfluid, the contact angles of ^{4}He crystals were measured on rough and smooth walls at very low temperatures. A rough wall was prepared in a simple manner in which a commercially available coating agent for car mirrors, which makes the glass surface superhydrophobic, was used to coat a glass plate. The contact angles of ^{4}He crystals were increased by approximately 10^{∘} on the rough wall coated with the agent. Therefore, the increase in the repellency of ^{4}He crystals in superfluid was demonstrated to be possible on a very rough surface. The enhancement of the contact angles and a scanning electron microscopy image of the coated surface both suggest that a Cassie-Baxter state of ^{4}He crystals was realized on the surface; the crystals did not have full contact with the wall, but entrapped superfluid was present beneath the crystals in the hollow parts of the rough wall.

Synthesis of endohedral iron-fullerenes by ion implantation

In this paper, we discuss the results of our study of the synthesis of endohedral iron-fullerenes. A low energy Fe(+) ion beam was irradiated to C60 thin film by using a deceleration system. Fe(+)-irradiated C60 thin film was analyzed by high performance liquid chromatography and laser desorption/ ionization time-of-flight mass spectrometry. We investigated the performance of the deceleration system for using a Fe(+) beam with low energy. In addition, we attempted to isolate the synthesized material from a Fe(+)-irradiated C60 thin film by high performance liquid chromatography.

Status of the Bio-Nano electron cyclotron resonance ion source at Toyo University

In the paper, the material science experiments, carried out recently using the Bio-Nano electron cyclotron resonance ion source (ECRIS) at Toyo University, are reported. We have investigated several methods to synthesize endohedral C60 using ion-ion and ion-molecule collision reaction in the ECRIS. Because of the simplicity of the configuration, we can install a large choice of additional equipment in the ECRIS. The Bio-Nano ECRIS is suitable not only to test the materials production but also to test technical developments to improve or understand the performance of an ECRIS.

Fullerene-rare gas mixed plasmas in an electron cyclotron resonance ion source

A synthesis technology of endohedral fullerenes such as Fe@C60 has developed with an electron cyclotron resonance (ECR) ion source. The production of N@C60 was reported. However, the yield was quite low, since most fullerene molecules were broken in the ECR plasma. We have adopted gas-mixing techniques in order to cool the plasma and then reduce fullerene dissociation. Mass spectra of ion beams extracted from fullerene-He, Ar or Xe mixed plasmas were observed with a Faraday cup. From the results, the He gas mixing technique is effective against fullerene destruction.

Low energy Fe+ beam irradiation to C60 thin film

We have developed an electron cyclotron resonance ion source apparatus, which is designed for the production of endohedral fullerene. In this study, we irradiated the Fe(+) beam to the C(60) thin film. We changed the experimental condition of the dose and the ion energy. We could observe the Fe + C(60) peak by analysis of the time-of-flight mass spectrometry. The highest intensity of the Fe + C(60) peak was observed at the ion energy of 200 eV. The Fe + C(60) peak intensity tended to become high in the case of long irradiation time and large dose.

Effect of pulse-modulated microwaves on fullerene ion production with electron cyclotron resonance ion source

Fullerene plasmas generated by pulse-modulated microwaves have been investigated under typical conditions at the Bio-Nano electron cyclotron resonance ion source. The effect of the pulse modulation is distinct from that of simply structured gases, and then the density of the fullerene plasmas increased as decreasing the duty ratio. The density for a pulse width of 10 μs at the period of 100 μs is 1.34 times higher than that for CW mode. We have studied the responses of fullerene and argon plasmas to pulsed microwaves. After the turnoff of microwave power, fullerene plasmas lasted ∼30 times longer than argon plasmas.

Study on the beam transport from the Bio-Nano ECRIS

The beam transport of N(+) ion and C(60)(+) ion in the Bio-Nano ECRIS with min-B configuration was investigated based on the ion beam profiles. The N(+) beam could be focused under the low-beam current conditions. Also the C(60)(+) beam could be focused in spite of the large space-charge effect which will lead the divergence of the beam. We confirmed that our beam transport system works well even for the C(60)(+) ion beam. We estimated the highest C(60)(+) beam current with the focused beam profile by comparing the N(+) ion beam.

Bio-Nano ECRIS: an electron cyclotron resonance ion source for new materials production

We developed an electron cyclotron resonance ion source (ECRIS) for new materials production on nanoscale. Our main target is the endohedral fullerenes, which have potential in medical care, biotechnology, and nanotechnology. In particular, iron-encapsulated fullerene can be applied as a contrast material for magnetic resonance imaging or microwave heat therapy. Thus, our new ECRIS is named the Bio-Nano ECRIS. In this article, the recent progress of the development of the Bio-Nano ECRIS is reported: (i) iron ion beam production using induction heating oven and (ii) optimization of singly charged C(60) ion beam production.