Cerebral atrophy as predictor of cognitive function in old, community-dwelling individuals

OBJECTIVES

The impact of cortical and subcortical atrophy on cognitive function was examined in a sample of older community-dwelling men and women.

MATERIAL AND METHODS

Magnetic resonance imaging was performed on a sample of 129 individuals [age: 68.4 +/- 3.6 years (mean +/- SD), range 64-74 years, 64 women and 65 men, Mini-Mental State Examination scores above 23] to assess cortical and subcortical atrophy. Participants also performed a number of cognitive tasks, and the measures of atrophy were used to predict performance in these tasks.

RESULTS

In men, frontal cortical atrophy predicted worse performance in word fluency and the Stroop test, and occipital cortical atrophy was associated with poor performance in motor speed. In women, poor performance in motor speed was associated with subcortical atrophy at the level of the caudate nucleus.

CONCLUSION

Atrophy in certain areas was associated with poor performance in specific cognitive tasks, although the amount of explained variance was rather limited in this quite homogeneous sample.

Model-based mutagenesis to improve the enantioselective fractionation properties of an antibody

The binding affinity and specificity of recombinant antibodies can be modified by site-directed mutagenesis. Here we have used molecular modelling of the variable domains of an enantiospecific antibody fragment to fine-tune its affinity so it is more suitable for the fractionation of the drug enantiomers. We have shown earlier that the Fab fragment of this antibody specifically recognizes one enantiomer from the racemic mixture of a medical drug and that it can be used for the fractionation of these enantiomers by affinity chromatography. However, the affinity was unnecessarily high, requiring harsh elution conditions to release the bound enantiomer. Thus, the continuous use of the antibody affinity columns was impossible. We made a homology model of the antibody and designed mutations to the antigen-binding site to decrease the affinity. Four out of five point mutations showed decreased affinity for the hapten. Two of the mutations were also combined to construct a double mutant. The affinity columns made using one of the single mutants with lowered affinity and the double mutant were capable of multiple rounds of enantioseparation.

Characterization of the sec1-1 and sec1-11 mutations

Sec1 proteins are implicated in positive and negative regulation of SNARE complex formation. To better understand the function of Sec1 proteins we have identified the nature of the temperature-sensitive mutations in sec1-1 and sec1-11. The sec1-1 mutation changes a conserved glycine(443) to glutamic acid. The sec1-11 mutation changes a highly conserved arginine(432) to proline. Based on homology and the crystal structure of the mammalian nSec1p, the corresponding amino acids localize to the 3b domain of nSec1p. Compared to the wild-type Sec1p the mutant proteins are less abundant even at the permissive temperature. Thus, the R432P and G443E mutations may cause structural alterations that affect folding and make the mutant proteins more susceptible to degradation. The remaining part is sufficient for growth and protein secretion at 24 degrees C and thus is likely to be properly folded. At 37 degrees C the mutant proteins become non-functional. In pulse-chase-type experiments the newly synthesized Sec1-1 and Sec1-11 proteins decayed similarly with the wild-type protein. Thus, the non-functionality of the mutant proteins cannot be explained by denaturation-induced degradation only. It is possible that the newly synthesized mutant proteins fold slowly and are susceptible to degradation before they have managed to fold and associate with other proteins. The mutant proteins were unable to interact with the Sec1p-interacting proteins Mso1p and Sso2p in the two-hybrid assay, even at the permissive temperature. These results localize sec1-1 and sec1-11 mutations to a domain of Sec1p and suggest a mechanism by which sec1-1 and sec1-11 cells become temperature-sensitive.

Efficient enantioselective separation of drug enantiomers by immobilised antibody fragments

There is an increasing need for methods for efficient enantioselective separation and purification of chiral drugs. Genetic engineering provides the means for generating recombinant antibodies exhibiting extremely high specificity for even small molecular mass compounds. Here, recombinant antibody fragments have been generated for the drug diarylalkyltriazole that contains two chiral centres. Immobilised antibody fragments has been used successfully for efficient, step-wise separation of two enantiomers of the drug. Owing to the antibody specificity, one enantiomer came out in the flow-through, while the bound enantiomer could be specifically eluted. One of the antibodies tolerated solvents required both for dissolving the target molecules and for their elution for extended times and was shown to function over multiple cycles of the separation process.

Cellulose-binding domains promote hydrolysis of different sites on crystalline cellulose

The cohesin-dockerin interaction in Clostridium thermocellum cellulosome mediates the tight binding of cellulolytic enzymes to the cellulosome-integrating protein CipA. Here, this interaction was used to study the effect of different cellulose-binding domains (CBDs) on the enzymatic activity of C. thermocellum endoglucanase CelD (1,4-beta-d endoglucanase, EC) toward various cellulosic substrates. The seventh cohesin domain of CipA was fused to CBDs originating from the Trichoderma reesei cellobiohydrolases I and II (CBD(CBH1) and CBD(CBH2)) (1,4-beta-d glucan-cellobiohydrolase, EC), from the Cellulomonas fimi xylanase/exoglucanase Cex (CBD(Cex)) (beta-1,4-d glucanase, EC), and from C. thermocellum CipA (CBD(CipA)). The CBD-cohesin hybrids interacted with the dockerin domain of CelD, leading to the formation of CelD-CBD complexes. Each of the CBDs increased the fraction of cellulose accessible to hydrolysis by CelD in the order CBD(CBH1) < CBD(CBH2) approximately CBD(Cex) < CBD(CipA). In all cases, the extent of hydrolysis was limited by the disappearance of sites accessible to CelD. Addition of a batch of fresh cellulose after completion of the reaction resulted in a new burst of activity, proving the reversible binding of the intact complexes despite the apparent binding irreversibility of some CBDs. Furthermore, burst of activity also was observed upon adding new batches of CelD-CBD complexes that contained a CBD differing from the first one. This complementation between different CBDs suggests that the sites made available for hydrolysis by each of the CBDs are at least partially nonoverlapping. The only exception was CBD(CipA), whose sites appeared to overlap all of the other sites.

Cross-modality priming for individual words in memory for coherent texts

This study explores implicit memory within the domain of text processing. Three experiments were designed to study cross-modality priming in a word-stem completion test following presentation of target words in the context of a coherent text. Four main results emerged. First, we found a significant priming effect for words previously studied in a text, this priming is higher with low-frequency words than with high-frequency words. Second, subjects demonstrated more repetition priming when study and test modalities matched than when they were different. Third, the magnitude of the priming effect in the visual condition varied with the perceptual processing of the text read. Fourth, priming effects did not depend on subjects' remembering of the words of text read as measured by a yes/no recognition test since no modality effect was found in this latter memory test. These results challenge Levy's (1993) view and are discussed in the framework of the transfer-appropriate processing view proposed by Roediger, Weldon and Challis (1989).

SEM1, a homologue of the split hand/split foot malformation candidate gene Dss1, regulates exocytosis and pseudohyphal differentiation in yeast

The exocyst is an essential multiprotein complex mediating polarized secretion in yeast. Here we describe a gene, SEM1, that can multicopy-suppress exocyst mutants sec3-2, sec8-9, sec10-2, and sec15-1. SEM1 is highly conserved among eukaryotic species. Its human homologue, DSS1, has been suggested as a candidate gene for the split hand/split foot malformation disorder. SEM1 is not an essential gene. However, its deletion rescued growth of the temperature-sensitive exocyst mutants sec3-2, sec8-9, sec10-1, and sec15-1 at the restrictive temperature. Cell fractionation showed that Sem1p is mainly cytosolic but also associates with the microsomal fraction. In linear sucrose gradients, Sem1p cosedimented with the exocyst component Sec8p. In diploid cells that normally do not form pseudohyphae (S288C background), deletion of SEM1 triggered pseudohyphal growth. This phenotype was abolished after reintroduction of either SEM1 or the mouse homologue Dss1 into the cells. In diploids that have normal capacity for pseudohyphal growth (Sigma1278b background), deletion of SEM1 enhanced filamentous growth. The functionality of both SEM1 and Dss1 in a differentiation process in yeast suggests that Dss1 indeed could be the gene affected in the split hand/split foot malformation disorder. These results characterize SEM1 as a regulator of both exocyst function and pseudohyphal differentiation and suggest a unique link between these two cellular functions in yeast.

Fine tuning of an anti-testosterone antibody binding site by stepwise optimisation of the CDRs

BACKGROUND

We have previously reported specificity improvement of an anti-testosterone monoclonal antibody (3-C4F5) by random mutagenesis of the third complementarity determining regions (CDR3s) and by phage display selection.

OBJECTIVES

Here we extend the mutagenesis strategy to the other CDRs and select the mutant libraries using two different approaches in order to further fine-tune the binding properties of this recombinant Fab fragment.

STUDY DESIGN

To improve the affinity the new mutant libraries were selected by using limiting, decreasing concentrations of biotinylated testosterone (TES) in solution and capturing the binders on streptavidin-coated microtiter plate. The specificity was improved by preincubating the mutant libraries in solution with a high concentration of the most problematic cross-reacting steroid, dehydroepiandrosterone sulfate (DHEAS).

RESULTS

In two different light chain CDR1 mutant clones isolated from the affinity pannings, the relative TES affinity was increased over 10-fold while the cross-reactivities to related steroids were preserved at the same level as in the parental combined CDR3 mutant clone. New heavy chain CDR1 and light chain CDR2 mutants showing slightly decreased cross-reactivities were isolated from specificity selections. By combining compatible mutant CDRs together we were able to create a Fab fragment with over 12-fold higher relative TES affinity and significantly lower cross-reactivity to DHEAS when compared to the original monoclonal antibody 3-C4F5.

CONCLUSIONS

Our results demonstrate that a high-affinity and selective recombinant Fab fragment working over a wide TES concentration range with clinical samples could be generated by CDR mutagenesis and phage display selection.

Specificity improvement of a recombinant anti-testosterone Fab fragment by CDRIII mutagenesis and phage display selection

The monoclonal antibodies so far developed by hybridoma technology have not had high enough specificity or affinity to distinguish the closely related steroid hormones in routine clinical assays. We have employed random mutagenesis and phage display approaches to improve the specificity of one anti-testosterone monoclonal antibody (3-C4F5). The affinity of the antibody is 0.3 x 10(9) M(-1) and the cross-reactivities with most of the related steroids are low. However, the antibody cross-reacts about 1% with dehydroepiandrosterone sulfate (DHEAS) and owing to the high DHEAS serum concentration this is about 1000-fold too high for clinical immunoassays. The complementarity-determining regions (CDRs) of the heavy and light chains, which were predicted by molecular modelling to be in close contact with the testosterone (TES) ligand, were randomized and mutant Fab libraries were cloned into a phagemid vector. Binders were selected by a competitive panning procedure. By combining the identified light and heavy chain CDRIII mutations the TES affinity was preserved at the wild-type level but DHEAS cross-reactivity was decreased to 0.03%. An important finding was that by the competitive panning procedure the overall binding specificity of the 3-C4F5 antibody was refined, since the cross-reactivities to related steroids were also significantly decreased in the combined mutant.

Acetyl xylan esterase from Trichoderma reesei contains an active-site serine residue and a cellulose-binding domain

The axe1 gene encoding acetyl xylan esterase was isolated from an expression library of the filamentous fungus Trichoderma reesei using antibodies raised against the purified enzyme. Apparently axe1 codes for the two forms, pI 7 and pI 6.8, of acetyl xylan esterase previously characterized. The axe1 encodes 302 amino acids including a signal sequence and a putative propeptide. The catalytic domain has no amino acid similarity with the reported acetyl xylan esterases but has a clear similarity, especially in the active site, with fungal cutinases which are serine esterases. Similarly to serine esterases, the axe1 product was inactivated with phenylmethylsulfonyl fluoride. At its C-terminus it carries a cellulose binding domain of fungal type, which is separated from the catalytic domain by a region rich in serine, glycine, threonine and proline. The binding domain can be separated from the catalytic domain by limited proteolysis without affecting the activity of the enzyme towards acetylated xylan, but abolishing its capability to bind cellulose.

Yeast protein translocation complex: isolation of two genes SEB1 and SEB2 encoding proteins homologous to the Sec61 beta subunit

A yeast gene (cDNA clone) was isolated in a screen for suppressors of secretion-defective sec15-1 mutation. This gene encodes a protein homologous to the beta subunit of the mammalian Sec61 protein complex functioning in protein translocation into the endoplasmic reticulum (ER). The predicted protein, Seb1p, consists of 82 amino acids and contains one potential membrane-spanning region at the C-terminus but no N-terminal signal sequence. Seb1p shows 30% identity to the mammalian Sec61 beta subunit and 34% identity to the Arabidopsis thaliana Sec61 beta subunit. Overexpression of SEB1 from a multicopy plasmid suppressed the temperature sensitivity of sec61-2 and sec61-3 mutants. Immunofluorescence and immunoelectron microscopy indicated that Seb1p resides in the ER membranes with the hydrophilic N-terminus exposed to the cytoplasm. The in vitro translated Seb1p was post-translationally inserted into microsomal membranes. As the chromosomal disruption of the SEB1 gene was not lethal, potential homologous genes were screened by heterologous hybridization. The SEB1 homologue thus isolated, SEB2, encodes a protein 53% identical to Seb1p. Disruption of the chromosomal SEB2 was not lethal whereas the double disruption of SEB1 and SEB2 resulted in a temperature-sensitive phenotype. This study further emphasizes the evolutionary conservation of the ER protein translocation apparatus and provides novel genetic tools for its functional analysis.

Properties of a single-chain antibody containing different linker peptides

Single-chain antibodies were constructed using six different linker peptides to join the VH and VL domains of an anti-2-phenyloxazolone (Ox) antibody. Four of the linker peptides originated from the interdomain linker region of the fungal cellulase CBHI and consisted of 28, 11, six and two amino acid residues. The two other linker peptides used were the (GGGGS)3 linker with 15 amino acid residues and a modified IgG2b hinge peptide with 22 residues. Proteolytic stability and Ox binding properties of the six different scFv derivatives produced in Escherichia coli were investigated and compared with those of the corresponding Fv fragment containing no joining peptide between the V domains. The hapten binding properties of different antibody fragments were studied by ELISA and BIAcoreTM. The interdomain linker peptide improved the hapten binding properties of the antibody fragment when compared with Fv fragment, but slightly increased its susceptibility to proteases. Single-chain antibodies with short CBHI linkers of 11, six and two residues had a tendency to form multimers which led to a higher apparent affinity. The fragments with linkers longer than 11 residues remained monomeric.

Introduction of lysine residues on the light chain constant domain improves the labelling properties of a recombinant Fab fragment

Europium chelates provide a non-radioactive alternative for sensitive labelling of antibodies for diagnostic immunoassays. Lysine residues at antibody surfaces are ready targets for labelling by an isothiocyanate derivative of the europium chelate (Eu3+). Here the labelling efficiency of a recombinant anti-human alpha-fetoprotein (hAFP) Fab fragment has been improved by increasing its lysine content by protein engineering. Molecular modelling was used to identify three light chain constant domain surface arginine residues, R154, R187 and R210, which were mutated to lysine residues. The mutations did not influence the affinity of the lysine-enriched Fab fragment and its labelling efficiency was found to be approximately 40% higher than that of the wild-type Fab fragment. With low degree of labelling, the affinities of the two Fab fragments were identical and comparable with that of the original monoclonal anti-hAFP IgG. With a higher degree of labelling the affinities of both Fab fragments decreased more than that of the intact IgG since more lysine residues are available for labelling in the additional heavy chain constant domains of the larger molecule. Electrostatic adsorption and covalent immobilization of the Fab fragments were characterized by BIAcore and the lysine-enriched Fab fragment was found to be more efficiently immobilized to an activated carboxymethyl surface.

Membrane insertion and intracellular transport of yeast syntaxin Sso2p in mammalian cells

Proteins of the syntaxin family are suggested to play a key role in determining the specificity of intracellular membrane fusion events. They belong to the class of membrane proteins which are devoid of N-terminal signal sequence and have a C-terminal membrane anchor. Sso2p is a syntaxin homologue involved in the Golgi to plasma membrane vesicular transport in yeast. The protein was transiently expressed in BHK-21 cells using the Semliki Forest virus vector, and its localization and mode of membrane insertion were studied. By immunofluorescence and immuno-EM we show that Sso2p is transported to its final location, the plasma membrane, along the biosynthetic pathway. Experiments with synchronized Sso2p synthesis or expression of the protein in the presence of brefeldin A indicate endoplasmic reticulum as the initial membrane insertion site. During a 20 degrees C temperature block Sso2p accumulated in the Golgi complex and was chased to the plasma membrane by a subsequent 37 degrees C incubation in the presence of cycloheximide. The in vitro translated protein was able to associate with dog pancreatic microsomes post-translationally. A truncated form of Sso2p lacking the putative membrane anchor was used to show that this sequence is necessary for the membrane insertion in vivo and in vitro. The results show that this syntaxin-like protein does not directly associate with its target membrane but uses the secretory pathway to reach its cellular location, raising interesting questions concerning regulation of SNARE-type protein function.

Quantification of hepatitis B virus DNA by competitive amplification and hybridization on microplates

Present methods for quantification of hepatitis B virus (HBV) particles from serum samples are not sensitive enough for some recent clinical applications. We describe a test that allows quantification of HBV DNA in a broad dynamic range from less than 40 to 10(6) molecules based on competitive PCR. The specimen DNA and a known amount of an internal standard (IS) are co-amplified in the same tube with the same primers, one of which is biotinylated. The two biotinylated products can be quantified by hybridization on microplates coated with streptavidin, because their internal sequences are nonhomologous. An adequate standard curve is obtained by amplifying HBV DNA from a plasmid clone together with an IS. The ratio of amplified HBV DNA to IS DNA enables quantification of the original amount of HBV without tedious titrations of each sample with competitor. The lower limit for quantitative analysis with radioactive probes was between 4 and 40 virus particles in a 10-microliters serum samples.

Quantification of mitochondrial DNA carrying the tRNA(8344Lys) point mutation in myoclonus epilepsy and ragged-red-fiber disease

Myoclonus epilepsy and ragged-red-fiber syndrome (MERRF) is caused by a point mutation at nucleotide 8344 in the tRNA(Lys) gene of mitochondrial DNA. We analyzed leukocyte DNA from nine members of a large MERRF family using a new technique, solid-phase minisequencing. Quantitative analysis of the tRNA(8344Lys) mutation showed that the mutated mtDNA comprised from 9 to 72% of the total mtDNA in the leukocytes of these individuals. The minisequencing method is a promising tool for the diagnosis of MERRF. In addition to the identification of the tRNA(8344Lys) mutation, the relative amount of mutated mtDNA can be simultaneously determined in the same assay from one blood sample.

N-ras gene mutations in acute myeloid leukemia: accurate detection by solid-phase minisequencing

Mutations in the N-ras gene are found in one-third of patients with acute myeloid leukemia. The N-ras mutations could serve as markers for residual cells, if a highly sensitive method for detecting the mutations was available. We applied a new method, solid-phase minisequencing, to analyze bone-marrow cells from 16 patients with acute myeloid leukemia for mutations in codon 12, 13 and 61 of the N-ras gene. In the solid-phase minisequencing technique the mutations are identified by a primer extension reaction, in which a single labelled nucleoside triphosphate is incorporated into an immobilized DNA fragment previously amplified by the polymerase chain reaction. We identified N-ras mutations in 5 of the patients (30%). In one patient, we observed 2 mutations that were shown to be located in different alleles. With the solid-phase minisequencing method, we were able to determine the proportion of mutated cells in the samples. We found that in 4 of the samples only a fraction (7-64%) of the blasts carried an N-ras mutation, and in one sample practically all blast cells were mutated. The method was highly sensitive, allowing us to identify N-ras mutations even when the sample consisted of 99.7% normal cells and only 0.3% mutated blasts.

Convenient and quantitative determination of the frequency of a mutant allele using solid-phase minisequencing: application to aspartylglucosaminuria in Finland

Aspartylglucosaminuria (AGU) is a recessively inherited lysosomal disease caused by inadequate aspartylglucosaminidase (AGA) activity. The disease is prevalent in the genetically isolated Finnish population. We have used a new method, solid-phase minisequencing, to determine the frequency of two missense mutations in the AGA gene in this population. In samples from 70% of the Finnish AGU families, we found that the two nucleotide changes were always associated, and they were identified in 98% of the AGU alleles analyzed. Thus, the high prevalence of AGU in the Finnish population is the consequence of a founder effect of one ancient mutation. The identification of asymptomatic carriers by the minisequencing test proved to be unequivocal. The method also allowed quantification of a mutated nucleotide sequence present in less than 1% of a sample. The frequency of AGU carriers in this population was 1/36 when estimated by quantifying the mutated AGU allele in a pooled leukocyte sample from 1350 normal Finnish individuals.

Detection of Plasmodium falciparum DNA in a microtitration plate-based hybridization test

A rapid DNA-test, depending on the affinity based hybrid collection principle, was developed for the detection of Plasmodium falciparum DNA from clinical specimens. In this method, hybridization takes place in solution and the hybrids are collected onto a solid phase for measurement. Two probes are used, one labelled with an affinity tag (biotin) and the other with a detectable label (32P). In the present test a single oligonucleotide complementary to a 21-base pair sequence which is highly repeated in the parasite genome served both as capture and detector probe. The test is a 2-h hybridization performed in streptavidin coated microtitration plate wells, onto which the labelled hybrids simultaneously bind. The sensitivity of the assay with a crude erythrocyte lysate specimen was 1.6 x 10(9) repeat units corresponding to about 160 parasites in one microliter blood. The results allowed quantification of the repeat sequences and thus estimation of the degree of parasitemia in clinical specimens.

Screening for defined cystic fibrosis mutations by solid-phase minisequencing

We have developed a rapid method for the quantitative detection of point mutations and deletions. In this minisequencing method, enzymatically amplified DNA, 5'-biotinylated in one strand, is bound to a solid phase and denatured. A detection primer, constructed to end immediately before the mutation, is annealed to the immobilized single-stranded template and elongated with a single, labeled deoxynucleoside residue. We have applied the solid-phase minisequencing method to the detection of the major mutation, delta F508, causing cystic fibrosis (CF). In the presence of the allele with the delta F508 mutation, [3H]dTTP is incorporated; with the nonmutated allele, [3H]dCTP is incorporated. Thus, samples from heterozygous individuals allow the incorporation of both labels. The method was evaluated by analyzing 59 coded DNA specimens collected from 20 Finnish CF patients and their parents. The ratio of [3H]C to [3H]T gave unambiguously the allele combination. The solid-phase minisequencing method was also applicable to the analysis of three CF mutations simultaneously, i.e., delta F508, G542X, and G551D. We conclude that the microtiter-plate-based minisequencing test is an accurate method for the screening of defined sequence alterations in the CF gene.

Rapid detection of a plant virus by solution hybridization using oligonucleotide probes

A novel solution hybridization method for the diagnosis of a plant virus was evaluated. Synthetic oligonucleotide probes were used for the detection of potato virus X (PVX) in crude leaf sap extracts by hybridization in solution. Three 40-nucleotide-long oligonucleotide probes complementary to RNA sequences of potato virus X near the 3' end were synthesized. Two probes were 32P-labelled and one biotinylated. The three probes were allowed to form hybrids with the target viral nucleic acid in solution, and the formed hybrids were isolated with the aid of the biotinylated capture probe using avidin polystyrene beads after the reaction. Alternatively, hybrids were captured from the poly(A) tail of the viral RNA on oligo(dT) cellulose. The maximum signal was obtained after 4 h hybridization. About 70% of the maximum signal was obtained after 2 h hybridization. Sensitivity with the two 32P-labelled oligonucleotide probes was 1-5 x 10(7) molecules of PVX RNA. This corresponds to 0.6-3 ng of the virus. Crude leaf sap did not interfere with the detection of the virus. These results suggest that this solution hybridization method permits rapid detection of a plant virus in crude plant sap without sample pretreatment and may thus open new avenues for the development of a nucleic-acid-based ELISA-like diagnostic test for the detection of plant viruses.

Genetic analysis of the polymorphism of the human apolipoprotein E using automated solid-phase sequencing

A direct sequencing approach has been used to analyze the polymorphism in the human apolipoprotein E gene. A method is described, in which the DNA is amplified by the polymerase chain reaction, immobilized, and sequenced by a semi-automatic procedure adaptable to clinical diagnosis. The three alleles of the apolipoprotein E gene, which differ from each other by two nucleotide substitutions and which influence serum cholesterol levels, were analyzed. The solid-phase method was able to resolve the correct nucleotide sequence in samples from both homozygous and heterozygous individuals. No cloning steps are needed and the immobilization and separation of the DNA is accomplished using magnetic beads.

A primer-guided nucleotide incorporation assay in the genotyping of apolipoprotein E

We describe a new technique by which single base changes in human genes can be conveniently detected. In this method the DNA fragment of interest is first amplified using the polymerase chain reaction with an oligonucleotide primer biotinylated at its 5'-end. The amplified 5'-biotinylated DNA is immobilized on an avidin matrix and rendered single-stranded. The variable nucleotide in the immobilized DNA is identified by a one-step primer extension reaction directed by a detection step primer, which anneals to the DNA immediately upstream of the site of variation. In this reaction a single labeled nucleoside triphosphate complementary to the nucleotide at the variable site is incorporated. The method is highly sensitive, allowing the use of nucleoside triphosphates labeled with radioisotopes of low specific activity (3H) as well as nonradioactive markers (digoxigenin). The procedure consists of few and simple operations and is thus applicable to the analysis of large numbers of samples. Here we applied it to the analysis of the three-allelic polymorphism of the human apolipoprotein E gene. We were able to correctly identify all possible combinations of the three apo E alleles.

A solution hybridization method for quantification of mRNAs: determining the amount and stability of oncogene mRNA

A solution hybridization method for the quantification of specific mRNAs is described. This assay utilizes complementary RNA probes prepared by in vitro transcription, sandwich hybridization in solution, and affinity-based hybrid collection. The possibility of using this method for crude biological samples without purifying mRNAs makes it ideal when accurate quantification of multiple samples is needed. Human N-myc oncogene transcript was used as a model and as little as 0.24 pg (2 X 10(5) molecules) of N-myc mRNA could be detected. Using this assay it was shown that human neuroblastoma IMR-32 cells contain approximately 500 N-myc mRNA molecules per cell having a half-life of approximately 35 min.

Affinity-based collection of amplified viral DNA: application to the detection of human immunodeficiency virus type 1, human cytomegalovirus and human papillomavirus type 16

We have devised a sensitive and convenient hybridization technique by combining the polymerase chain reaction (PCR) with affinity-based hybrid collection. In this method 5'-biotinylated primers are used to introduce biotin residues into the DNA fragments during the amplification. The amplified DNA fragments are detected by liquid hybridization using a 32P- or 35S-labelled oligonucleotide as probe. For measurement the hybrids are collected on polystyrene microparticles or onto microtitre wells taking advantage of the biotinavidin interaction. The method is highly sensitive allowing the detection of 30 molecules of DNA. It involves few and simple operations, and is thus suitable for routine diagnostics. The applicability of the method to the detection of HIV-1 DNA from blood, HCMV DNA from urine and HPV-16 DNA from cervical scrapes was evaluated.

The Semliki-Forest-virus-specific nonstructural protein nsP4 is an autoproteinase

The Semliki-Forest-virus-specific nonstructural proteins are translated as a large polyprotein (2431 amino acid residues), from which the mature polymerase components nsP1, nsP2, and nsP4 are released by proteolytic cleavages. The complete ns polyprotein (P1234) can be cleaved in two alternative ways yielding either P123 (with sequences of nsP1, nsP2 and nsP3) and nsP4 or P12 (nsP1 plus nsP2) and P34 (nsP3 plus nsP4). We studied the possible autoproteolytic role of nsP4 involved in the cleavage between nsP3 and nsP4 in an in vitro transcription-translation system. cDNAs encoding P34 precursor and shorter precursor protein segments covering the nsP3-nsP4 cleavage region, were cloned under the T7 RNA polymerase promoter. The mRNAs synthesized in vitro were capped and translated in rabbit reticulocyte lysates. The translational products were analyzed by SDS/PAGE. The precursor proteins containing nsP4 sequences were cleaved yielding the products with expected sizes, indicating that the cleavage took place at the nsP3-nsP4 junction. By deleting and truncating the cDNA coding for nsP4, the proteolytic activity was mapped within the 102 amino-terminal amino acids of nsP4. The cleavage between nsP3 and nsP4 can be inhibited by pepstatin A and probably takes place in cis, since exogenously added nsP4 was unable to mediate it.

Direct sequencing of affinity-captured amplified human DNA application to the detection of apolipoprotein E polymorphism

We describe a method for the direct sequencing of DNA amplified by the polymerase chain reaction (PCR). Biotin is introduced into one strand of the amplified DNA using a 5'-biotinylated PCR primer. The synthesized fragment is captured on an avidin-matrix and rendered single stranded, whereafter the nucleotide sequence of the immobilized strand is determined by the chain termination method. The method involves few and simple operations and is thus applicable to the analysis of human genes for routine diagnostic purposes. Here we applied the method for determination of the three-allelic polymorphism of the apolipoprotein E (apo E) gene. We were able to correctly identify the alleles in both homozygous and heterozygous samples.

Quantification of polymerase chain reaction products by affinity-based hybrid collection

We have used oligonucleotides modified with biotin in the 5'-end as primers in the polymerase chain reaction (PCR)-amplification. This results in the synthesis of 5'-biotinylated DNA molecules, which are detected by hybridization to a labelled probe in solution. The formed hybrids are collected on an avidin-matrix by mediation of the biotin residue of the target molecules. The affinity-based hybrid collection method is quantitative and makes it possible to measure the amount of DNA produced in the PCR-amplification. At low concentrations of template the efficiency of the process is close to 100%, making it possible to detect the presence of a few molecules of target DNA in 25 cycles. With high template concentrations the efficiency of the process is low.

Nucleic acid sandwich hybridization: enhanced reaction rate with magnetic microparticles as carriers

A method for the detection of nucleic acid hybrids using the sandwich hybridization technique with magnetic polystyrene microparticles as the solid support is described. The capture DNA is coupled to the polystyrene-hydroxy surface of the particles through p-toluenesulfonyl chloride activation. The use of microparticles results in a substantial increase in the reaction rate compared to filter hybridization, without decreasing the sensitivity of detection. Polyethylene glycol additionally enhances the reaction rate. The use of magnetic microparticles allows rapid and convenient collection of the formed hybrids.

An EBV-based mammalian cell expression vector for efficient expression of cloned coding sequences

The construction of a mammalian cell expression vector using human cytomegalovirus immediate early gene enhancer to initiate transcription of inserted coding sequences is described. The vector also carries Epstein-Barr virus EBNA-1 nuclear antigen gene, ori-P sequences and hygromycin B resistance gene hph from E. coli. The expression capacity of this construct was tested by inserting the chloramphenicol acetyltransferase (CAT) gene into the vector. The EBV-CAT construct was transfected into various cell lines and high levels of CAT activity were obtained in human and monkey cells. In these cells, the vector DNA also replicates as an extrachromosomal element having 1 to 20 copies per cell. In most cases, the vector copy number and the expression level of inserted gene was in positive correlation in different cell clones.

Sensitive detection of genes by sandwich hybridization and time-resolved fluorometry

Europium has been used as a non-radioactive marker in immunoassays as this metal can be detected with high sensitivity by time-resolved fluorometry. In this work streptavidin labeled with europium was used to detect biotinylated probes in a sandwich nucleic-acid hybridization assay with microtitration strips as the solid phase. pBR 322 plasmids were detected with a sensitivity of 4 x 10(5) molecules. As the sample is added in solution in sandwich hybridization, fast and simple sample pre-treatment can be used without encountering background problems. The method was applied to test bacterial samples of uropathogenic Escherichia coli strains for the presence of the beta-lactamase gene.

Fast quantification of nucleic acid hybrids by affinity-based hybrid collection

A hybridization technique for the quantification of nucleic acids is described. In the method a probe pair is allowed to form hybrids with the target nucleic acid in solution. One of the probes has been modified with an affinity label, by which the formed hybrids can be isolated after the reaction. Streptavidin-agarose was used to capture hybrids containing biotinylated DNA. The hybrids were measured using radioiodine as label on the second probe. The rate of the hybridization reaction in solution is fast, allowing the whole procedure to be carried out in 3 h. The method is quantitative with a detection limit of 4 X 10(5) molecules (0.67 attomoles) target DNA. The test is insensitive to impurities in biological samples, which are analyzed without purification of the target DNA. Non-isotopic measurement of the hybrids can also be applied. In this case the hybrids are bound to microtitration wells and detected spectrophotometrically by peroxidase-catalyzed colour development.

Time-resolved fluorometry: a sensitive method to quantify DNA-hybrids

Europium and other lanthanides can be excitated with UV-radiation, whereafter the energy is released as fluorescence, delayed in time up to 1 ms after the excitation. Eu can be used as a sensitive label in biological assays. Here we report on the application of time-resolved fluorometry to detect nucleic acid hybrids. The probe DNA was tagged with a hapten, either a fluorene or a sulfone group. After hybridization the probe DNA was detected by a two-step immunological assay with the second antibody labelled with Eu. The method is quantitative with a detection limit of 0.3 pg of actual target regions of immobilized adenovirus genomic DNA. The label was also used in sandwich hybridization, which allowed analyzing nasopharyngeal mucus for the presence of adenovirus.

Algorithms for the search of amino acid patterns in nucleic acid sequences

Some algorithms are described for the search of regions in a nucleic acid sequence that, when translated into amino acids, are homologous to a given amino acid pattern. All algorithms are modifications of the dynamic programming method for sequence comparison such that the translation of codons is taken into account. One of the algorithms has been implemented as a FORTRAN 77 program. The program operates on files that follow the format of the EMBL Nucleotide Sequence Data Library.

A complex of single-strand binding protein and M13 DNA as hybridization probe

Single-stranded DNA was complexed to the single-strand binding protein (SSB) of Escherichia coli in a mass ratio of 30:1. The protein moiety of this complex can be labelled by a number of methods of which we have chosen radio-iodination and biotinylation as examples. The SSB-M13 DNA complexes, labelled to high specific activities, were used as probes in hybridization experiments in which 1.6 X 10(-18) moles of immobilized target DNA were detected. The stability of the hybrids was not severely decreased by the binding of SSB. Analysis of hybrids by electron microscopy showed that complexing of DNA with SSB could be used to allow its subsequent identification in the hybrids.

The repeated regions of Semliki Forest virus defective-inferfering RNA interferes with the encapsidation process of the standard virus

Two different defective interfering RNAs of Semliki Forest virus have been cloned and sequenced previously. These molecules have repeated sequence blocks between unique terminal regions. The late gene region of SV40 virus has been replaced with the repeating unit detected in both defective-inferfering (DI) RNAs, and by complementation with a tsA mutant of SV40 a mixed stock of recombinant and helper virus was obtained. Upon infection of monkey kidney cells the recombinant expressed the repeated part of the DI RNA (svDI301 RNA). Superinfection of these cells with standard Semliki Forest virus showed that (i) the synthesis of SFV genomic RNA is marginally if at all affected by the svDI301 RNA, (ii) the svDI301 RNA is not replicated by SFV-RNA-dependent RNA polymerase, and (iii) packaging efficiency of the standard SFV genome RNA into virions is clearly decreased in the presence of svDI301 RNA. These results suggest that the terminal regions of the DI RNA molecule are required for efficient replication while the central repeated elements are involved in encapsidation.

Cytomegalovirus in urine: detection of viral DNA by sandwich hybridization

A cytomegalovirus (CMV)-specific sandwich hybridization test was constructed by using two adjacent BamHI DNA fragments of CMV DNA as reagents. The fragments were cloned into two different vectors. One of the recombinants was attached to the filter, and the other was the labeled probe. When present in the sample, CMV DNA mediated labeling of the filter by hybridizing to both the filter-bound DNA and the probe. The sandwich hybridization test was applied for the detection of CMV DNA from urine. DNA was released from virus by 2% Sarkosyl, concentrated by 2-butanol extraction and isopropanol precipitation, denatured, and finally subjected to the sandwich hybridization test. As a result, 70 to 90% of the original viral DNA could be recovered and demonstrated by the quantitative hybridization reaction. Urine could be stored at room temperature in Sarkosyl for at least 2 days without affecting the detectability of CMV. The clinical applicability of the test was evaluated by studying urine samples from four infants excreting CMV. Sandwich hybridization demonstrated the presence of CMV DNA in all of the specimens. These contained originally 10(5) to 10(8) CMV DNA molecules per ml.

SEQAID: a DNA sequence assembling program based on a mathematical model

A program package, called SEQAID, to support DNA sequencing is presented. The program automatically assembles long DNA sequences from short fragments with minimal user interaction. Various tools for controlling the assembling process are also available. The main novel features of the system are that SEQAID implements several new well-behaved algorithms based on a mathematical model of the problem. It also utilizes available information on restriction fragments to detect illegitimate overlaps and to find relationships between separately assembled sequence blocks. Experiences with the system are reported including an extremely pathological real sequence which offers an interesting benchmark for this kind of programs.

Novel test for rapid viral diagnosis: detection of adenovirus in nasopharyngeal mucus aspirates by means of nucleic-acid sandwich hybridisation

Nucleic-acid sandwich hybridisation detected adenovirus in nasopharyngeal aspirates from children with acute respiratory infections within 20 h. The differentiation between subgroups of adenovirus (B and C) and the lack of false positives indicated the specificity of the method. The reference test was detection of an adenovirus protein (hexon) by means of radioimmunoassay. In nucleic-acid sandwich hybridisation the sample DNA mediates the binding of a labelled "probe" DNA fragment to a second DNA fragment bound on filter. The sample DNA itself is not fixed to a solid support, and the only pretreatment required is boiling in a detergent solution. The results indicate that the sandwich hybridisation is specific, quantitative, easy to do, and only marginally affected by the crude nature of the sample. It may therefore be a valuable addition to the range of rapid methods in microbial diagnosis.

Amino acid sequence of alpha-amylase from Bacillus amyloliquefaciens deduced from the nucleotide sequence of the cloned gene

We have isolated by molecular cloning the gene coding for the alpha-amylase (1,4-alpha-D-glucan glucanohydrolase, EC 3.2.1.1.) from Bacillus amyloliquefaciens and determined its complete nucleotide sequence. The gene cloned in the plasmid pUB110 using Bacillus subtilis as a host, was contained in a 2.3-kilobase insert. Starting from an ATG initiator codon, an open reading frame comprising a total of 514 amino acids (1542 base pairs) was found within the cloned DNA fragment. The gene region encoding the COOH terminus of alpha-amylase was located by direct COOH-terminal analysis of the purified exoenzyme. The NH2-terminal portion of the gene encodes a 31 amino acid-long signal peptide (Palva, L., Pettersson, R. F., Kalkkinen, N., Lehtovaara, P., Sarvas, M., Söderlund, H., Takkinen, K., and Kääriäinen, L. (1981) Gene 15, 43-51). Since the signal peptide is correctly cleaved in the new host, as shown here by direct NH2-terminal sequence analysis, the exoamylase consists of 483 amino acid residues, corresponding to a molecular weight of 54,778. The reading frame used to deduce the amino acid sequence was found to be correct by comparison with partial amino acid sequence data published previously (Detera, S. D., and Friedberg, F. (1979) Int. J. Peptide Protein Res. 14, 364-372; Chung, H., and Friedberg, F. (1980) Biochem. J. 185, 387-395). Several differences between the sequence presented here and the partial ones published previously, however, were found. The nucleotide sequences both 5' and 3' to the alpha-amylase gene revealed palindromic structures including a stretch of six T-residues, suggesting transcription termination signals on both sides of the gene. Thus, it appears that alpha-amylase is translated from a monocistronic mRNA.