Identification, genetic localization, and allelic diversity of selectively amplified microsatellite polymorphic loci in lettuce and wild relatives (Lactuca spp.)

Selectively amplified microsatellite polymorphic locus (SAMPL) analysis is a method of amplifying microsatellite loci using generic PCR primers. SAMPL analysis uses one AFLP primer in combination with a primer complementary to microsatellite sequences. SAMPL primers based on compound microsatellite sequences provided the clearest amplification patterns. We explored the potential of SAMPL analysis in lettuce to detect PCR-based codominant microsatellite markers. Fifty-eight SAMPLs were identified and placed on the genetic map. Seventeen were codominant. SAMPLs were dispersed with RFLP markers on 11 of the 12 main linkage groups in lettuce, indicating that they have a similar genomic distribution. Some but not all fragments amplified by SAMPL analysis were confirmed to contain microsatellite sequences by Southern hybridization. Forty-five cultivars of lettuce and five wild species of Lactuca were analyzed to determine the allelic diversity for codominant SAMPLs. From 3 to 11 putative alleles were found for each SAMPL; 2-6 alleles were found within Lactuca sativa and 1-3 alleles were found among the crisphead genotypes, the most genetically homogeneous plant type of L. sativa. This allelic diversity is greater than that found for RFLP markers. Numerous new alleles were observed in the wild species; however, there were frequent null alleles. Therefore, SAMPL analysis is more applicable to intraspecific than to interspecific comparisons. A phenetic analysis based on SAMPLs resulted in a dendrogram similar to those based on RFLP and AFLP markers.

Transcriptome and proteome analysis of ovaries of arrhenotokous and thelytokous Venturia canescens

Under arrhenotoky, unfertilized haploid eggs develop as males but under thelytoky they develop into diploid females after they have undergone diploidy restoration. In the parasitoid wasp Venturia canescens both reproductive modes occur. Thelytoky is genetically determined but the underlying genetics of diploidy restoration remain unknown. In this study we aim to identify the genes and/or proteins that control thelytoky. cDNA-amplified fragment length polymorphism (cDNA-AFLP) analysis of total ovarian RNA and two-dimensional protein electrophoresis in combination with mass spectrometry revealed putative transcripts and proteins involved in arrhenotokous and thelytokous development. The detected tubulin and actin protein differences are most likely functionally related to the two types of reproduction.

The characterisation of Bacillus spores occurring in the manufacturing of (low acid) canned products

Spore-forming bacteria can be a problem in the food industry, especially in the canning industry. Spores present in ingredients or present in the processing environment severely challenge the preservation process since their thermal resistance may be very high. We therefore asked the question which bacterial spore formers are found in a typical soup manufacturing plant, where they originate from and what the thermal resistance of their spores is. To answer these questions molecular techniques for bacterial species and strain identification were used as well as a protocol for the assessment of spore heat stress resistance based on the Kooiman method. The data indicate the existence and physiological cause of the high thermal resistance of spores of many of the occurring species. In particular it shows that ingredients used in soup manufacturing are a rich source of high thermal resistant spores and that sporulation in the presence of ingredients rich in divalent metal ions exerts a strong influence on spore heat resistance. It was also indicated that Bacillus spores may well be able to germinate and resporulate during manufacturing i.e. through growth and sporulation in line. Both these spores and those originating from the ingredients were able to survive certain thermal processing settings. Species identity was confirmed using fatty acid analysis, 16SrRNA gene sequencing and DNA-DNA hybridisation. Finally, molecular typing experiments using Ribotyping and AFLP analysis show that strains within the various Bacillus species can be clustered according to the thermal resistance properties of their spores. AFLP performed slightly better than Ribotyping. The data proofed to be useful for the generation of strain specific probes. Protocols to validate these probes in routine identification and innovation aimed at tailor made heat processing in soup manufacturing have been formulated.

A high-density, integrated genetic linkage map of lettuce (Lactuca spp.)

An integrated map for lettuce comprising of 2,744 markers was developed from seven intra- and inter-specific mapping populations. A total of 560 markers that segregated in two or more populations were used to align the individual maps. 2,073 AFLP, 152 RFLP, 130 SSR, and 360 RAPD as well as 29 other markers were assigned to nine chromosomal linkage groups that spanned a total of 1,505 cM and ranged from 136 to 238 cM. The maximum interval between markers in the integrated map is 43 cM and the mean interval is 0.7 cM. The majority of markers segregated close to Mendelian expectations in the intra-specific crosses. In the two L. saligna x L. sativa inter-specific crosses, a total of 155 and 116 markers in 13 regions exhibited significant segregation distortion. Data visualization tools were developed to curate, display and query the data. The integrated map provides a framework for mapping ESTs in one core mapping population relative to phenotypes that segregate in other populations. It also provides large numbers of markers for marker assisted selection, candidate gene identification, and studies of genome evolution in the Compositae.

QTL analysis to study the association between leaf size and abscisic acid accumulation in droughted rice leaves and comparisons across cereals

Plants accumulate abscisic acid (ABA) under droughted conditions. Genetic variation in the accumulation of ABA in deteched and partially dehydrated leaves of rice has previously been reported, and this was found to be associated with variation in leaf size (smaller leaves made more ABA). Correlation analysis failed to distinguish clearly between a causal relationship between the two traits and close genetic between loci controlling the traits. Here we present a detailed genetic analysis of ABA accumulation in detached and partially dehydrated rice leaves. using a population of F2 plants generated from the lowland x upland cross IR20 (high-ABA) x 63-83 (low-ABA) which was mapped with RFLP and AFLP markers. Several highly significant quantitative trait loci (QTLs) for ABA accumulation and leaf weight were identified. Only one of the minor QTLs for ABA accumulation (accounting for only 4% of the phenotypic variance) was coincident with any QTLs for leaf size such that the high-ABA allele was associated with smaller leaves. This analysis, therefore, showed that the association previously found between ABA accumulation and leaf size was probably largely due to genetic linkage and not to a direct effect of leaf size on ABA accumulation or vice versa. Because of the importance of ABA accumulation in regulating responses of plants to drought stress and the effects of plant size on the rate of development of stress, QTLs for drought-induced ABA accumulation, leaf size and tiller number were compared between rice and wheat. In particular, a possible location in rice was sought for a homoeologue of the major wheat vernalization responsive gene, Vrn1, as this gene is also associated with major effects on leaf size, tiller number and ABA accumulation in wheat. The likelihood of homoeologous loci regulating ABA accumulation, leaf size and tiller number in the two crops is discussed.

PCR-based fingerprinting using AFLPs as a tool for studying genetic relationships in Lactuca spp

AFLP markers were evaluated for determining the phylogenetic relationships Lactuca spp. Genetic distances based on AFLP data were estimated for 44 morphologically diverse lines of cultivated L. sativa and 13 accessions of the wild species L. serriola, L. saligna, L. virosa, L. perennis, and L. indica. The same genotypes were analyzed as in a previous study that had utilized RFLP markers. The phenetic tree based on AFLP data was consistent with known taxonomic relationships and similar to a tree developed with RFLP data. The genetic distance matrices derived from AFLP and RFLP data were compared using least squares regression analysis and, for the cultivar data, by principal component analysis. There was also a positive linear relationship between distance estimates based on AFLP data and kinship coefficients calculated from pedigree data. AFLPs represent reliable PCR-based markers for studies of genetic relationships at a variety of taxonomic levels.

Sources and genetic structure of a cluster of genes for resistance to three pathogens in lettuce

The second largest cluster of resistance genes in lettuce contains at least two downy mildew resistance specificities, Dm5/8 and Dm10, as well as Tu, providing resistance against turnip mosaic virus, and plr, a recessive gene conferring resistance against Plasmopara lactucae-radicis, a root infecting downy mildew. In the present paper four additional genetic markers have been added to this cluster, three RAPD markers and one RFLP marker, CL1795. CL1795 is a member of a multigene family related to triose phosphate isomerase; other members of this family map to the other two major clusters of resistance genes in lettuce. Seven RAPD markers in the region were converted into sequence characterized amplified regions (SCARs) and used in the further analysis of the region and the mapping of Dm10. Three different segregating populations were used to map the four resistance genes relative to molecular markers. There were no significant differences in gene order or rate of recombination between the three crosses. This cluster of resistance genes spans 6.4 cM, with Dm10 1.2 cM from Dm8. Marker analysis of 20 cultivars confirmed multiple origins for Dm5/8 specificity. Two different Lactuca serriola origins for the Du5/8 specificity had previously been described and originally designated as either Dm5 or Dm8. Some ancient cultivars also had the same specificity. Previously, due to lack of recombination in genetic analyses and the same resistance specificities, it was assumed that Dm5 and Dm8 were determined by the same gene. However, molecular marker analysis clearly identified genotypes characteristic of each source. Therefore, Dm5/8 specificity is either ancient and widespread in L. serriola and some L. sativa, or else has arisen on multiple occasions as alleles at the same locus or at linked loci.

Genetic mapping of turnip mosaic virus resistance in Lactuca sativa

Presence of the dominant Tu gene in Lactuca sativa is sufficient to confer resistance to infection by turnip mosaic virus (TuMV). In order to obtain an immunological assay for the presence of TuMV in inoculated plants, the TuMV coat protein (CP) gene was cloned by amplification of a cDNA corresponding to the viral genome using degenerate primers designed from conserved potyvirus CP sequences. The TuMV CP was overexpressed in Escherichia coli, and polyclonal antibodies were produced. To locate Tu on the L. sativa genetic map, F3 families from a cross between cvs "Cobbham Green" (resistant to TuMV) and "Calmar" (susceptible) were genotyped for Tu. Families known to be recombinant in the region containing Tu were infected with TuMV and tested by the indirect enzyme-linked immunosorbent assay (ELISA) using the anti-CP serum. This assay placed Tu between two random amplified polymorphic DNA (RAPD) markers and 3.2 cM from Dm5/8 (which confers resistance to Bremia lactucae). Also, bulked segregant analysis was used to screen for additional RAPD markers tightly linked to the Tu locus. Five new markers linked to Tu were identified in this region, and their location on the genetic map was determined using informative recombinants in the region. Six markers were identified as being linked within 2.5 cM of Tu.