Arrays of indefinitely long uniform nanowires and nanotubes

Nanowires are arguably the most studied nanomaterial model to make functional devices and arrays. Although there is remarkable maturity in the chemical synthesis of complex nanowire structures, their integration and interfacing to macro systems with high yields and repeatability still require elaborate aligning, positioning and interfacing and post-synthesis techniques. Top-down fabrication methods for nanowire production, such as lithography and electrospinning, have not enjoyed comparable growth. Here we report a new thermal size-reduction process to produce well-ordered, globally oriented, indefinitely long nanowire and nanotube arrays with different materials. The new technique involves iterative co-drawing of hermetically sealed multimaterials in compatible polymer matrices similar to fibre drawing. Globally oriented, endlessly parallel, axially and radially uniform semiconducting and piezoelectric nanowire and nanotube arrays hundreds of metres long, with nanowire diameters less than 15 nm, are obtained. The resulting nanostructures are sealed inside a flexible substrate, facilitating the handling of and electrical contacting to the nanowires. Inexpensive, high-throughput, multimaterial nanowire arrays pave the way for applications including nanowire-based large-area flexible sensor platforms, phase-changememory, nanostructure-enhanced photovoltaics, semiconductor nanophotonics, dielectric metamaterials,linear and nonlinear photonics and nanowire-enabled high-performance composites.

Yttrium Iron Garnet Thin Films with Very Low Damping Obtained by Recrystallization of Amorphous Material

We have investigated recrystallization of amorphous Yttrium Iron Garnet (YIG) by annealing in oxygen atmosphere. Our findings show that well below the melting temperature the material transforms into a fully epitaxial layer with exceptional quality, both structural and magnetic. In ferromagnetic resonance (FMR) ultra low damping and extremely narrow linewidth can be observed. For a 56 nm thick layer a damping constant of α = (6.15 ± 1.50) · 10(-5) is found and the linewidth at 9.6 GHz is as small as 1.30 ± 0.05 Oe which are the lowest values for PLD grown thin films reported so far. Even for a 20 nm thick layer a damping constant of α = (7.35 ± 1.40) · 10(-5) is found which is the lowest value for ultrathin films published so far. The FMR linewidth in this case is 3.49 ± 0.10 Oe at 9.6 GHz. Our results not only present a method of depositing thin film YIG of unprecedented quality but also open up new options for the fabrication of thin film complex oxides or even other crystalline materials.

Magnetic Skyrmions in a Thickness Tunable 2D Ferromagnet from a Defect Driven Dzyaloshinskii-Moriya Interaction

There is considerable interest in van der Waals (vdW) materials as potential hosts for chiral skyrmionic spin textures. Of particular interest is the ferromagnetic, metallic compound Fe3 GeTe2 (FGT), which has a comparatively high Curie temperature (150-220 K). Several recent studies have reported the observation of chiral Néel skyrmions in this compound, which is inconsistent with its presumed centrosymmetric structure. Here the observation of Néel type skyrmions in single crystals of FGT via Lorentz transmission electron microscopy (LTEM) is reported. It is shown from detailed X-ray diffraction structure analysis that FGT lacks an inversion symmetry as a result of an asymmetric distribution of Fe vacancies. This vacancy-induced breaking of the inversion symmetry of this compound is a surprising and novel observation and is a prerequisite for a Dzyaloshinskii-Moriya vector exchange interaction which accounts for the chiral Néel skyrmion phase. This phenomenon is likely to be common to many 2D vdW materials and suggests a path to the preparation of many such acentric compounds. Furthermore, it is found that the skyrmion size in FGT is strongly dependent on its thickness: the skyrmion size increases from ≈100 to ≈750 nm as the thickness of the lamella is increased from ≈90 nm to ≈2 µm. This extreme size tunability is a feature common to many low symmetry ferro- and ferri-magnetic compounds.

One-pot preparation of fluorinated mesoporous silica nanoparticles for liquid marble formation and superhydrophobic surfaces

One-pot synthesis of fluorinated mesoporous silica nanoparticles (FMSNs) is reported. Uniform mesoporous nanoparticles are prepared by condensation of tetraethyl orthosilicate (TEOS) and fluoroalkyl containing organotriethoxy silane monomers, respectively. The method enables selective deposition of fluorine atoms on the surface of the particles. FMSNs are used to prepare stable liquid marbles with water. An organo-modified silica sol is used with FMSNs to prepare mechanically stable superhydrophobic surfaces (water contact angle of 161°). The mechanical stability of the surface is investigated with water dripping and adhesive tape tests. The prepared FMSNs are promising building blocks for robust, large-area, and multifunctional self-cleaning surfaces.

Isothermal anisotropic magnetoresistance in antiferromagnetic metallic IrMn

Antiferromagnetic spintronics is an emerging field; antiferromagnets can improve the functionalities of ferromagnets with higher response times, and having the information shielded against external magnetic field. Moreover, a large list of aniferromagnetic semiconductors and metals with Néel temperatures above room temperature exists. In the present manuscript, we persevere in the quest for the limits of how large can anisotropic magnetoresistance be in antiferromagnetic materials with very large spin-orbit coupling. We selected IrMn as a prime example of first-class moment (Mn) and spin-orbit (Ir) combination. Isothermal magnetotransport measurements in an antiferromagnetic-metal(IrMn)/ferromagnetic-insulator thin film bilayer have been performed. The metal/insulator structure with magnetic coupling between both layers allows the measurement of the modulation of the transport properties exclusively in the antiferromagnetic layer. Anisotropic magnetoresistance as large as 0.15% has been found, which is much larger than that for a bare IrMn layer. Interestingly, it has been observed that anisotropic magnetoresistance is strongly influenced by the field cooling conditions, signaling the dependence of the found response on the formation of domains at the magnetic ordering temperature.

Control of Oxygen Vacancy Ordering in Brownmillerite Thin Films via Ionic Liquid Gating

Oxygen defects and their atomic arrangements play a significant role in the physical properties of many transition metal oxides. The exemplary perovskite SrCoO_3-δ (P-SCO) is metallic and ferromagnetic. However, its daughter phase, the brownmillerite SrCoO_2.5 (BM-SCO), is insulating and an antiferromagnet. Moreover, BM-SCO exhibits oxygen vacancy channels (OVCs) that in thin films can be oriented either horizontally (H-SCO) or vertically (V-SCO) to the film's surface. To date, the orientation of these OVCs has been manipulated by control of the thin film deposition parameters or by using a substrate-induced strain. Here, we present a method to electrically control the OVC ordering in thin layers via ionic liquid gating (ILG). We show that H-SCO (antiferromagnetic insulator, AFI) can be converted to P-SCO (ferromagnetic metal, FM) and subsequently to V-SCO (AFI) by the insertion and subtraction of oxygen throughout thick films via ILG. Moreover, these processes are independent of substrate-induced strain which favors formation of H-SCO in the as-deposited film. The electric-field control of the OVC channels is a path toward the creation of oxitronic devices.

Three-dimensional racetrack memory devices designed from freestanding magnetic heterostructures

The fabrication of three-dimensional nanostructures is key to the development of next-generation nanoelectronic devices with a low device footprint. Magnetic racetrack memory encodes data in a series of magnetic domain walls that are moved by current pulses along magnetic nanowires. To date, most studies have focused on two-dimensional racetracks. Here we introduce a lift-off and transfer method to fabricate three-dimensional racetracks from freestanding magnetic heterostructures grown on a water-soluble sacrificial release layer. First, we create two-dimensional racetracks from freestanding films transferred onto sapphire substrates and show that they have nearly identical characteristics compared with the films before transfer. Second, we design three-dimensional racetracks by covering protrusions patterned on a sapphire wafer with freestanding magnetic heterostructures. We demonstrate current-induced domain-wall motion for synthetic antiferromagnetic three-dimensional racetracks with protrusions of up to 900 nm in height. Freestanding magnetic layers, as demonstrated here, may enable future spintronic devices with high packing density and low energy consumption.

Observation of Robust Néel Skyrmions in Metallic PtMnGa

Over the past decade the family of chiral noncollinear spin textures has continued to expand with the observation in metallic compounds of Bloch-like skyrmions in several B20 compounds, and antiskyrmions in a tetragonal inverse Heusler. Néel like skyrmions in bulk crystals with broken inversion symmetry have recently been seen in two distinct nonmetallic compounds, GaV₄ S₈ and VOSe₂ O₅ at low temperatures (below ≈13 K) only. Here, the first observation of bulk Néel skyrmions in a metallic compound PtMnGa and, moreover, at high temperatures up to ≈220 K is reported. Lorentz transmission electron microscopy reveals the chiral Néel character of the skyrmions. A strong variation is reported of the size of the skyrmions on the thickness of the lamella in which they are confined, varying by a factor of 7 as the thickness is varied from ≈90 nm to ≈4 µm. Moreover, the skyrmions are highly robust to in-plane magnetic fields and can be stabilized in a zero magnetic field using suitable field-cooling protocols over a very broad temperature range to as low as 5 K. These properties, together with the possibility of manipulating skyrmions in metallic PtMnGa via current induced spin-orbit torques, make them extremely exciting for future spintronic applications.

Aspirin resistance after CABG

BACKGROUND

Temporary aspirin resistance can occur during the post-CABG period. If the factors causing resistance can be identified, the incidence of early graft occlusions can also be minimized.

METHODS

25 elective CABG cases were enrolled in the study. The platelet count, mean platelet volume, the C-reactive protein level, lipid profile, blood urea nitrogen (BUN), and creatinine levels were identified one day before the operation and on the 1st, 5th and 10th postoperative days. Optical aggregometry was used for the evaluation of aspirin response. The patients were divided into two groups: those with aspirin resistance and those with no aspirin resistance.

RESULTS

The rate of postoperative aspirin resistance was found to be 60 %. No significant difference was found when the preoperative and operative data of the two groups were compared. It was found that the rapid changes observed in the postoperative platelet counts and the C-reactive protein levels were similar.

CONCLUSION

Aspirin resistance is encountered during the early postoperative period in the majority of patients undergoing CABG. None of the factors studied were found to be causative for resistance formation. Further studies are required to clarify this entity.

Realization of Epitaxial NbP and TaP Weyl Semimetal Thin Films

Weyl semimetals (WSMs) exhibit an electronic structure governed by linear band dispersions and degenerate (Weyl) points that lead to exotic physical phenomena. While WSMs were established in bulk monopnictide compounds several years ago, the growth of thin films remains a challenge. Here, we report the bottom-up synthesis of single-crystalline NbP and TaP thin films, 9 to 70 nm thick, by means of molecular beam epitaxy. The as-grown epitaxial films feature a phosphorus-rich stoichiometry, a tensile-strained unit cell, and a homogeneous surface termination, unlike their bulk crystal counterparts. These properties result in an electronic structure governed by topological surface states as directly observed using in situ momentum photoemission microscopy, along with a Fermi-level shift of -0.2 eV with respect to the intrinsic chemical potential. Although the Fermi energy of the as-grown samples is still far from the Weyl points, carrier mobilities close to 103 cm2/(V s) have been measured at room temperature in patterned Hall-bar devices. The ability to grow thin films of Weyl semimetals that can be tailored by doping or strain, is an important step toward the fabrication of functional WSM-based devices and heterostructures.

Setting of the magnetic structure of chiral kagome antiferromagnets by a seeded spin-orbit torque

The current-induced spin-orbit torque switching of ferromagnets has had huge impact in spintronics. However, short spin-diffusion lengths limit the thickness of switchable ferromagnetic layers, thereby limiting their thermal stability. Here, we report a previously unobserved seeded spin-orbit torque (SSOT) by which current can set the magnetic states of even thick layers of the chiral kagome antiferromagnet Mn₃Sn. The mechanism involves setting the orientation of the antiferromagnetic domains in a thin region at the interface with spin currents arising from an adjacent heavy metal while also heating the layer above its magnetic ordering temperature. This interface region seeds the resulting spin texture of the entire layer as it cools down and, thereby, overcomes the thickness limitation of conventional spin-orbit torques. SSOT switching in Mn₃Sn can be extended beyond chiral antiferromagnets to diverse magnetic systems and provides a path toward the development of highly efficient, high-speed, and thermally stable spintronic devices.

Continuous Magnetoelectric Control in Multiferroic DyMnO3 Films with Twin-like Domains

The magnetic control of ferroelectric polarization is currently a central topic in the multiferroic researches, owing to the related gigantic magnetoelectric coupling and fascinating physics. Although a bunch of novel magnetoelectric effect have been discovered in multiferroics of magnetic origin, the manipulation of polarization was found to be fundamentally determined by the microscopic origin in a certain multiferroic phase, hindering the development of unusual magnetoelectric control. Here, we report emergent magnetoelectric control in DyMnO₃/Nb:SrTiO₃ (001) films showing twin-like domain structure. Our results demonstrate interesting magnetically induced partial switch of polarization due to the coexistence of polarizations along both the a-axis and c-axis enabled by the twin-like domain structure in DyMnO₃ films, despite the polarization-switch was conventionally believed to be a one-step event in the bulk counterpart. Moreover, a continuous and periodic control of macroscopic polarization by an in-plane rotating magnetic field is evidenced in the thin films. This distinctive magnetic manipulation of polarization is the consequence of the cooperative action of the twin-like domains and the dual magnetic origin of polarization, which promises additional applications using the magnetic control of ferroelectricity.

Accurate measurement of the chirality of WS2 nanotubes

We describe the structural parameters and atomic positions of a single-walled WS₂ nanotube. The structure factor is calculated in detail using analytic expressions for both single-walled and multi-walled WS₂ nanotubes. A zoning scheme has been developed to obtain the ratio m/n from the electron diffraction patterns. The procedure for determination of the chiral indices of both single-walled and multi-walled WS₂ nanotubes and the tilt angle is illustrated in detail for either normal incidence or inclined incidence. As an example of application, the determination of the chiral indices of a five-shell WS₂ nanotube was carried out and the tilt angle was obtained as 17.7°. The method developed here is useful and valid to determine the atomic structure of WS₂ nanotubes.

Inhibition of the Renin Angiotensin System Decreases Fibrogenic Cytokine Expression in Tacrolimus Nephrotoxicity in Rats

The aim of our study was to investigate the influence of angiotensin-converting enzyme (ACE) inhibition and angiotensin II receptor blockage on the renal function by light microscopic and immunohistochemical findings in a rat model of tacrolimus nephrotoxicity. Thirty-two male Wistar rats were divided into four groups of eight: G1 = control group; G2-G3, G4 = Tacrolimus (Tac) 1 mg/kg/d intraperitoneally (ip); G3 (Tac + Q) = ip Tac and peroral quinapril 10 mg/kg; and G4 (Tac + V) = Tac and valsartan 40 mg/d. Serum blood urea nitrogen (BUN), creatinine, and creatinine clearance were measured before and at the end of the study period. Renal tissues were assessed for light microscopic findings of tacrolimus toxicity. Transforming growth factor-beta, VEGF, PDGF, BMP-7, and interleukin-6 (IL-6) expression were semiquantitatively scored after immunohistochemical staining. At the end of the study period serum BUN and creatinine levels were increased in all groups, but creatinine clearance was not significantly changed between the groups. Afferent arteriolopathy was significantly less pronounced in G3 versus G2 and G4. Interstial fibrosis was significantly less pronounced in G3 and G4 versus G2. TGF-beta, PDGF, and IL-6 expression were significantly increased in G2, G3, and G4 compared to G1, and in G2 compared to G3 and G4. BMP-7 expression was significantly decreased in G2, G3, and G4 compared to G1, whereas the differences between G2, G3, and G4 failed to reach statistical significance. In conclusion, the results of our study suggested that renin angiotensin inhibition down-regulates fibrogenic cytokine expression in rats displaying tacrolimus nephrotoxicity.

Atomic Scale Control of Spin Current Transmission at Interfaces

Ferromagnet/heavy metal bilayers represent a central building block for spintronic devices where the magnetization of the ferromagnet can be controlled by spin currents generated in the heavy metal. The efficiency of spin current generation is paramount. Equally important is the efficient transfer of this spin current across the ferromagnet/heavy metal interface. Here, we show theoretically and experimentally that for Ta as heavy metal the interface only partially transmits the spin current while this effect is absent when Pt is used as heavy metal. This is due to magnetic moment reduction at the interface caused by 3d-5d hybridization effects. We show that this effect can be avoided by atomically thin interlayers. On the basis of our theoretical model we conclude that this is a general effect and occurs for all 5d metals with less than half-filled 5d shell.

Toward Versatile Sr2FeMoO6-Based Spintronics by Exploiting Nanoscale Defects

To actualize the high spintronic application potential of complex magnetic oxides, it is essential to fabricate these materials as thin films with the best possible magnetic and electrical properties. Sr2FeMoO6 is an outstanding candidate for such applications, but presently no thin film synthesis route, which would preserve the magnetic properties of bulk Sr2FeMoO6, is currently known. In order to address this problem, we present a comprehensive experimental and theoretical study where we link the magnetic and half metallic properties of Sr2FeMoO6 thin films to lattice strain, Fe-Mo antisite disorder and oxygen vacancies. We find the intrinsic effect of strain on the magnetic properties to be very small, but also that an increased strain will significantly stabilize the Sr2FeMoO6 lattice against the formation of antisite disorder and oxygen vacancies. These defects, on the other hand, are recognized to drastically influence the magnetism of Sr2FeMoO6 in a nonlinear manner. On the basis of the findings, we propose strain manipulation and reductive annealing as optimization pathways for improving the spintronic functionality of Sr2FeMoO6.

Atomic Displacements Enabling the Observation of the Anomalous Hall Effect in a Non-Collinear Antiferromagnet

Antiferromagnets with non-collinear spin structures display various properties that make them attractive for spintronic devices. Some of the most interesting examples are an anomalous Hall effect despite negligible magnetization and a spin Hall effect with unusual spin polarization directions. However, these effects can only be observed when the sample is set predominantly into a single antiferromagnetic domain state. This can only be achieved when the compensated spin structure is perturbed and displays weak moments due to spin canting that allows for external domain control. In thin films of cubic non-collinear antiferromagnets, this imbalance is previously assumed to require tetragonal distortions induced by substrate strain. Here, it is shown that in Mn₃ SnN and Mn₃ GaN, spin canting is due to structural symmetry lowering induced by large displacements of the magnetic manganese atoms away from high-symmetry positions. These displacements remain hidden in X-ray diffraction when only probing the lattice metric and require measurement of a large set of scattering vectors to resolve the local atomic positions. In Mn₃ SnN, the induced net moments enable the observation of the anomalous Hall effect with an unusual temperature dependence, which is conjectured to result from a bulk-like temperature-dependent coherent spin rotation within the kagome plane.

Competing Energy Scales in Topological Superconducting Heterostructures

Artificially engineered topological superconductivity has emerged as a viable route to create Majorana modes. In this context, proximity-induced superconductivity in materials with a sizable spin-orbit coupling has been intensively investigated in recent years. Although there is convincing evidence that superconductivity may indeed be induced, it has been difficult to elucidate its topological nature. Here, we engineer an artificial topological superconductor by progressively introducing superconductivity (Nb), strong spin-orbital coupling (Pt), and topological states (Bi₂Te₃). Through spectroscopic imaging of superconducting vortices within the bare s-wave superconducting Nb and within proximitized Pt and Bi₂Te₃ layers, we detect the emergence of a zero-bias peak that is directly linked to the presence of topological surface states. Our results are rationalized in terms of competing energy trends which are found to impose an upper limit to the size of the minigap separating Majorana and trivial modes, its size being ultimately linked to fundamental materials properties.

The predominance of substrate induced defects in magnetic properties of Sr2FeMoO6 thin films

A systematic study of epitaxially grown Sr2FeMoO6 thin films on SrTiO3, (LaAlO3)0.3(Sr2AlTaO6)0.7, SrLaAlO4 and MgO single crystal substrates were made. Transmission electron microscopy investigations showed sharp substrate/films interfaces and increased defect concentration with increased lattice mismatch, indicating defect formation such as dislocations, low angle grain boundaries and stacking faults as a strain relaxation mechanism. Large enough compressive mismatch cause the over-relaxation of the lattice parameters through reorganization or interface defects, which was observed as a tensile strain in films with compressive mismatch larger than  -1.05%. All the films with compressive mismatch were phase pure and epitaxially textured while signatures of SrMoO4 parasitic particle was found only in the film grown on MgO. No correlation between the antisite disorder and other structural defects or magnetic properties were found. Instead, the saturation magnetization, Curie temperature, magnetic domain rotation etc are higly dependent on the lattice mismatch induced defects, which outshines the possible correlation with B-site ordering.

All-Oxide Metasurfaces Formed by Synchronized Local Ionic Gating

Ionic gating of oxide thin films has emerged as a novel way of manipulating the properties of thin films. Most studies are carried out on single devices with a three-terminal configuration, but, by exploring the electrokinetics during the ionic gating, such a configuration with initially insulating films leads to a highly non-uniform gating response of individual devices within large arrays of the devices. It is shown that such an issue can be circumvented by the formation of a uniform charge potential by the use of a thin conducting underlayer. This synchronized local ionic gating allows for the simultaneous manipulation of the electrical, magnetic, and/or optical properties of large arrays of devices. Designer metasurfaces formed in this way from SrCoO2.5 thin films display an anomalous optical reflection of light that relies on the uniform and coherent response of all the devices. Beyond oxides, almost any material whose properties can be controlled by the addition or removal of ions via gating can form novel metasurfaces using this technique. These findings provide insights into the electrokinetics of ionic gating and a wide range of applications using synchronized local ionic gating.

Strain-driven formation of epitaxial nanostructures in brownmillerite strontium cobaltite thin films

Nanostructured materials can display unique physical properties and are of particular interest for their new functionalities. Epitaxial growth is a promising approach for the controlled synthesis of nanostructures with desired structures and crystallinity. SrCoOx is a particularly intriguing material owing to a topotactic phase transition between an antiferromagnetic insulating brownmillerite SrCoO2.5 (BM-SCO) phase and a ferromagnetic metallic perovskite SrCoO3-δ (P-SCO) phase depending on the oxygen concentration. Here, we present the formation and control of epitaxial BM-SCO nanostructures by substrate-induced anisotropic strain. Perovskite substrates with a (110)-orientation and which allow for compressive strain result in the creation of BM-SCO nanobars, while (111)-oriented substrates give rise to the formation of BM-SCO nanoislands. We have found that substrate-induced anisotropic strain coupled with the orientation of crystalline domains determines the shape and facet of the nanostructures, while their size can be tuned by the degree of strain. Moreover, the nanostructures can be transformed between antiferromagnetic BM-SCO and ferromagnetic P-SCO via ionic liquid gating. Thus, this study provides insights into the design of epitaxial nanostructures whose structure and physical properties can be readily controlled.

Intramolecular Friedel-Crafts Reaction with Trifluoroacetic Acid: Synthesizing Some New Functionalized 9-Aryl/Alkyl Thioxanthenes

In this study, a series of halogen-substituted thioxanthenes were synthesized because the most important and biologically active derivatives of xanthenes are thioxanthenes. In order to obtain new thioxanthene derivatives, first, the starting molecules were synthesized by the appropriate reaction methods in two steps. The intramolecular Friedel-Crafts alkylation (FCA) method was used to convert the prepared three aromatic substituted starting alcohol compounds to their corresponding thioxanthenes by cyclization. For the intramolecular FCA reaction of secondary alcohols, which are the starting compounds (1a-1t), organic Bro̷nsted acids, which require more innovative, easier, and suitable reaction conditions, were used instead of halide reagents with corrosive effects as classical FCA catalysts. Trifluoroacetic acid was determined to be the organocatalyst with the best yield. Therefore, some original 9-aryl/alkyl thioxanthene derivatives (2a-2t) were synthesized using the optimized FCA method. In addition, a new sulfone derivative of thioxanthene 3i was prepared by performing the oxidation reaction with one of the obtained new thioxanthene 2i. Thioxanthenes and their derivatives are important heterocyclic structures that contain pharmacologically valuable sulfur and are used in the treatment of psychotic diseases such as Alzheimer's or schizophrenia, as well as a number of potent biological activities.

Thickness-Tunable Zoology of Magnetic Spin Textures Observed in Fe5GeTe2

The family of two-dimensional (2D) van der Waals (vdW) materials provides a playground for tuning structural and magnetic interactions to create a wide variety of spin textures. Of particular interest is the ferromagnetic compound Fe5GeTe2 that we show displays a range of complex spin textures as well as complex crystal structures. Here, using a high-brailliance laboratory X-ray source, we show that the majority (1 × 1) Fe5GeTe2 (FGT5) phase exhibits a structure that was previously considered as being centrosymmetric but rather lacks inversion symmetry. In addition, FGT5 exhibits a minority phase that exhibits a long-range ordered (√3 × √3)-R30° superstructure. This superstructure is highly interesting in that it is innately 2D without any lattice periodicity perpendicular to the vdW layers, and furthermore, the superstructure is a result of ordered Te vacancies in one of the topmost layers of the FGT5 sheets rather than being a result of vertical Fe ordering as earlier suggested. We show, from direct real-space magnetic imaging, evidence for three distinct magnetic ground states in lamellae of FGT5 that are stabilized with increasing lamella thickness, namely, a multidomain state, a stripe phase, and an unusual fractal state. In the stripe phase we also observe unconventional type-I and type-II bubbles where the spin texture in the central region of the bubbles is nonuniform, unlike conventional bubbles. In addition, we find a bobber or a cocoon-like spin texture in thick (∼170 μm) FGT5 that emerges from the fractal state in the presence of a magnetic field. Among all the 2D vdW magnets we have thus demonstrated that FGT5 hosts perhaps the richest variety of magnetic phases that, thereby, make it a highly interesting platform for the subtle tuning of magnetic interactions.

Effects of COVID-19 infection on ECG parameters in outpatients

Objective

Covid-19 infection has been declared as a pandemic disease by the World Health Organization (WHO) and has been associated with increased morbidity and mortality. More than 400 million people diagnosed with the disease has been reported until February 2022 [1]. Covid-19 infection mostly progresses with lung involvement and pneumonia, however, its effects on the cardiovascular system are also well-known. Studies have reported that Covid 19 infection can trigger cardiac events such as acute myocardial damage, acute myocarditis, acute coronary syndrome (ACS), ventricular arrhythmias, cardiogenic shock, and cardiac arrest [2]. Electrocardiogram (ECG) is an important tool to diagnose cardiac involvement. QTc interval, QT dispersion, Tp-e interval, Tp-e/QTc ratio are defined as ventricular repolarization parameters and these parameters are associated with increased risk of ventricular arrhythmia [3,4]. In our study, we aimed to evaluate to predict ventricular arrhythmia by ECG in Covid-19 patients.

Methods

Our study is a single-center, cross-sectional study. Patients diagnosed with Covid-19 in our center between July and October 2020 were included. 408 patients with positive SARS-CoV2 PCR test were detected and the ECGs of the patients were recorded at admission and 15 days after symptomatic recovery. After the exclusion criteria, remained 91 patients were analyzed. Conduction parameters (PR and QRS durations) and repolarization parameters (QTc interval, QT dispersion, Tp-e interval and Tp-e/QTc ratio) were evaluated in 12-lead ECG recordings.

Results

Ninety-one patients with Covid-19 infection were included. The group were consisted of 47 male (52%) and 44 female (48%). The mean age was 50.4 years. As a result of the statistical analysis, no significant difference was observed between the groups in terms of PR interval (142.2±21.4 ms vs. 140.1±19.0 ms; p=0.312). QRS duration was found significantly higher during active infection (91.4±12.2 ms vs. 88.8±10.9 ms; p=0.022). The mean QTc duration was detected longer in the first ECG, but no statistically significant difference was observed between the two groups (426.1±23.6 ms vs. 422.5±26.2 ms; p=0.237). QT dispersion (35.2±7.3 ms vs. 27.7±7.8 ms; p<0.001), Tp-e interval (86.7±10.1 ms vs. 76.1±9.9 ms; p<0.001) and Tp-e/QTc ratio (0.204±0.026 vs 0.180±0.025; p<0.001) were found significantly higher during active infection

Conclusion

In our study, QRS complex, QT dispersion, Tp-e interval, Tp-e/QTc ratio were significantly higher during active infection. We considered these parameters as a contributor of the increased mortality by inducing ventricular arrhythmia and sudden death in Covid-19 patients during active infection.

Funding Acknowledgement

Type of funding sources: None.