Physicochemical and retrogradation properties of modified chestnut starches

Physicochemical properties of acetylated (AC), cross-linked (CL), and hydroxypropylated (HP) chestnut starches were investigated. Modified chestnut starch showed low RS and amylose contents. AC revealed the highest solubility and HP showed the highest swelling power at 60 °C. CL showed the lowest solubility and swelling power at both 60 and 90 °C. AC and HP showed a lower pasting temperature and higher peak viscosity than native chestnut starch (NC). Modified chestnut starch formed gels at higher solid content than NC. CL had the lowest freeze-thaw stability, and AC and HP showed the strongest tolerance to freeze-thaw cycles. Amylopectin melting enthalpy of NC dramatically increased over the first 2 days and continued increasing gradually until day 24. On the other hand, all the modified chestnut starches showed a slight increase in amylopectin melting enthalpy, indicating retarded retrogradation. CL showed the lowest degree of retrogradation, followed by HP, AC, and NC.

Photochemical model evaluation of 2013 California wild fire air quality impacts using surface, aircraft, and satellite data

The Rim Fire was one of the largest wildfires in California history, burning over 250,000 acres during August and September 2013 affecting air quality locally and regionally in the western U.S. Routine surface monitors, remotely sensed data, and aircraft based measurements were used to assess how well the Community Multiscale Air Quality (CMAQ) photochemical grid model applied at 4 and 12 km resolution represented regional plume transport and chemical evolution during this extreme wildland fire episode. Impacts were generally similar at both grid resolutions although notable differences were seen in some secondary pollutants (e.g., formaldehyde and peroxyacyl nitrate) near the Rim fire. The modeling system does well at capturing near-fire to regional scale smoke plume transport compared to remotely sensed aerosol optical depth (AOD) and aircraft transect measurements. Plume rise for the Rim fire was well characterized as the modeled plume top was consistent with remotely sensed data and the altitude of aircraft measurements, which were typically made at the top edge of the plume. Aircraft-based lidar suggests O₃ downwind in the Rim fire plume was vertically stratified and tended to be higher at the plume top, while CMAQ estimated a more uniformly mixed column of O₃. Predicted wildfire ozone (O₃) was overestimated both at the plume top and at nearby rural and urban surface monitors. Photolysis rates were well characterized by the model compared with aircraft measurements meaning aerosol attenuation was reasonably estimated and unlikely contributing to O₃ overestimates at the top of the plume. Organic carbon was underestimated close to the Rim fire compared to aircraft data, but was consistent with nearby surface measurements. Periods of elevated surface PM_2.5 at rural monitors near the Rim fire were not usually coincident with elevated O₃.

Determination of HPGe peak efficiency for voluminous gamma-ray sources by using an effective solid angle method

A code called EXVol has been developed to obtain the absolute peak efficiency for an extended or voluminous γ-ray source. The method is based on the concept of effective solid angles. Several efficiency curves that have been determined semi-empirically for voluminous sources are compared with the experimental values based on certified reference volume sources. To study the geometric and matrix effects, standard γ-ray sources of several media, volumes and shapes were measured using HPGe detectors with three different efficiencies. For the n-type detector of 32% relative efficiency, the relative deviations are less than ±10%; this performance is similar to that of existing programs for similar purposes. The EXVol code is able to calculate the detection efficiency within approximately five minutes or less. Systematic errors based on EXVol input parameters, which are mainly due to the inherent uncertainty in the detector's characteristic dimensions provided by the vendor, are studied to obtain more accurate specifications of the detectors.

Long-term exposure of Sprague Dawley rats to 20 kHz triangular magnetic fields

PURPOSE

There are only a few reports on harmful effects of 20 kHz sine waves; however, it is essential to comprehensively evaluate the potentially harmful effect of triangular signals at the same frequency. Therefore, in this study, effects of long-term exposure to 20 kHz magnetic fields was examined.

MATERIALS AND METHODS

Eighty Sprague Dawley rats were divided into two groups (half male and female in each sham and exposed groups), and they were exposed to 20 kHz triangular magnetic fields at 6.25 microT rms for 8 h/day for 12 or 18 months. Urinalysis [pH, glucose, protein, ketone bodies, red blood cells (RBC), nitrogen, bilirubin, urobilinogen, and specific gravity], hematological analysis (RBC, hemoglobin, hematocrit, thrombocyte count, and leucocyte count), blood biochemistry (total protein, blood urea nitrogen, creatinine, glucose, total bilirubin, total cholesterol, aspartate aminotransferase, alanine aminotransferase, and alkaline phosphatase), and histopathological analysis of organs (thymus, stomach, intestine, liver, kidney, testis, ovary, spleen, brain, heart, and lung) were performed.

RESULTS

No significant differences were seen between 20 kHz magnetic-fields exposed rats and sham-exposed rats in body and organ weights, hematological analysis, blood biochemistry, urinalysis data, and histopathological examination, except for the numbers of neutrophiles and lymphocytes in female rats. The number of neutrophiles was significantly increased in female rats on the 12th month after exposure, and the number of lymphocytes in female rats was significantly decreased on the 18th month.

CONCLUSION

Long-term exposure of rats to 20 kHz triangular magnetic fields did not induce any significantly harmful effects, except changes in neutrophiles at 12 months and lymphocytes at 18 months of exposure in female rats. These hematological changes need to be investigated again at a higher intensity of 20 kHz magnetic fields.

Absolute calibration of 60Co by using sum-peak method and an HPGe detector

The sum-peak method was applied to calibrate four 60Co sources in the range of 25-350kBq. An HPGe-based gamma-ray spectroscopy system was used, and the effects of the angular correlation and pulse pile-up were corrected, and are discussed. The correction for the angular correlation was obtained from a theoretical calculation, while the pulse pile-up effect was corrected using a new extrapolation technique based on the pile-up measurements by varying the shaping time of the amplifier. The determined radioactivities were within 2% deviation from the values reported by the supplier and the associated uncertainties were less than 2%. The observed consistency was obtained under the experimental condition of keeping the total counting rate <or=15kcps.

New galactolipids from the marine bacillariophycean microalga Nitzschia sp

Two new galactopyranosyldiacylglycerols have been isolated from the marine bacillariophycean microalga Nitzschia sp. and their structures were determined as (2S)-3-O-beta-D-galactopyranosyl-1,2-di-O-(9Z-hexadecenoyl)glycerol (1) and (2S)-3-O-beta-D-galactopyranosyl-1-O-(5Z,8Z,11Z,14Z,17Z-eicosapentaenoyl)-2-O-(9Z-hexadecenoyl)glycerol (2) by physicochemical evidence.

A new diacylgalactolipid containing 4Z-16:1 from the marine cyanobacterium Oscillatoria sp

A new diacylgalactolipid was isolated from the marine cyanobacterium Oscillatoria sp., and the structure was elucidated as (2S)-3-O-beta-D-galactopyranosyl-1-O-(9Z,12Z-oc-tadecadienoyl)-2-O-(4Z-hexadecenoyl)glycerol by enzymatic partial hydrolysis using lipase and physicochemical evidence, which included determining the double bond position in the hexadecenoic acid moiety.

Total synthesis of a demethoxy-egonol from Styrax obassia

The total synthesis of a demethoxy-egonol isolated from Styrax obassia, 5-(3-hydroxypropyl)-2-(3',4'-methylenedioxyphenyl)benzofuran (9), is described. The key steps involve the construction of a 2-arylbenzofuran skeleton 7 from methyl 3-(4-hydroxyphenyl)propionate with 2-chloro-2-methylthio-(3',4'-methylenedioxy)acetophenone (6) in the presence of ZnCl2 and successive desulfurization of the resulting product 7.