OBOMod - Integrated modelling framework for residents' exposure to pesticides

BACKGROUND

Pesticides can be transported from the site of application to homes via different routes and lead to exposure of residents, raising concerns regarding health effects. We built a deterministic model framework (OBOmod) to assess exposure of residents living near fields where pesticides are applied.

METHODS

OBOmod connects five independent models operating on an hourly timescale and high spatial resolution (meters). Models include descriptions of spray drift, volatilization, atmospheric transport and dispersion, exchange between outdoor and indoor air and exchange between indoor air and dust. Fourteen bulb field applications under different weather conditions and comprising 12 pesticides were simulated. Each simulation included the first seven days after the application. The concentrations computed with OBOmod were compared with those measured in outdoor and indoor air and the amounts measured in indoor dust samples.

RESULTS

Model evaluation indicated suitability of the developed framework to estimate outdoor and indoor air concentrations. For most pesticides, model accuracy was good. The framework explained about 30% to 95% of the temporal and spatial variability of air concentrations. For 20% of the simulations, the framework explained more than 35% of spatial variability of concentrations in dust. In general, OBOmod estimates remained within one order of magnitude from measured levels. Calculations showed that in addition to spray drift during application, volatilization from the field after spraying and pesticides in house dust are important routes for residents' exposure to pesticides.

CONCLUSIONS

Our framework covers many processes needed to calculate exposure of residents to pesticides. The evaluation phase shows that, with the exception of the dust model, the framework can be used in support of health and epidemiological studies, and can serve as a tool to support development of regulations and policy making regarding pesticide use.

Comparative Performance Testing of Respirator versus Surgical Mask Using a Water Droplet Spray Model

BACKGROUND

During the SARS-CoV-2 pandemic, there was shortage of the standard respiratory protective equipment (RPE). The aim of this study was to develop a procedure to test the performance of alternative RPEs used in the care of COVID-19 patients.

METHODS

A laboratory-based test was developed to compare RPEs by total inward leakage (TIL). We used a crossflow nebulizer to produce a jet spray of 1-100 µm water droplets with a fluorescent marker. The RPEs were placed on a dummy head and sprayed at distances of 30 and 60 cm. The outcome was determined as the recovery of the fluorescent marker on a membrane filter placed on the mouth of the dummy head.

RESULTS

At 30 cm, a type IIR surgical mask gave a 17.7% lower TIL compared with an FFP2 respirator. At 60 cm, this difference was similar, with a 21.7% lower TIL for the surgical mask compared to the respirator. When adding a face shield, the TIL at 30 cm was further reduced by 9.5% for the respirator and 16.6% in the case of the surgical mask.

CONCLUSIONS

A safe, fast and very sensitive test method was developed to assess the effectiveness of RPE by comparison under controlled conditions.

Rheological aspects of mucin-containing solutions and saliva substitutes

In this study rheological properties of aqueous solutions of mucin, albumin and mucin-albumin have been investigated in search for saliva substitutes. They were compared with commercially available saliva substitutes on the one hand and natural human saliva on the other hand. For the latter a few measurements on saliva are reported here in addition to previously reported measurements done in our laboratory. Proteins absorb at the interface and saliva proteins do so strongly and rapidly. Therefore rheological measurements were carried out on the interface and on the bulk underneath the layer. In both cases the flow curve and the complex viscosity was determined. The results show that specific mucin-albumin solutions were rheologically similar to human whole saliva with respect to both bulk liquid and surface properties. The rheological properties of commercial saliva substitutes were essentially different from those of human saliva. It is concluded that mucin-albumin solutions have good perspectives as saliva substitutes.

Rheological properties of human saliva

From measurements with a Couette-type viscometer provided with a guard ring it was shown that at the saliva-air interface a protein layer is adsorbed. Measurements of the surface shear modulus of this layer on saliva of 7 healthy subjects were performed at a frequency of about 70 Hz and a temperature of 25 degrees C. For a surface age of about 1.5 h the surface shear modulus and the surface viscosity were in the order of 1 Nm-1 and 10(-3) Nm-1 s, respectively. From ellipsometric measurements it was found that the thickness of the protein layer was approx. 100 nm and, using this value, it could be concluded that the shear modulus and the dynamic viscosity were in the order of 10(7) Pa and 10(4) Pa s, respectively. The layer appeared to be fragile. Even shear deformation amplitudes of 4 x 10(-5) are too high to assure linearity. The complex viscosity (eta = eta' - i eta") of the bulk liquid of human submandibular saliva below the absorbed layer was measured in the frequency range 70 Hz-200 kHz with 3 torsional resonators, each for a different frequency, and a Ni-tube resonator. It was concluded, that the real part of the complex viscosity (eta') decreases from 1.1 mPa s at 70 Hz to a value of 0.95 mPa s at high frequencies. Except at the lowest frequency (70 Hz), the value of eta" was too small to be detected.