Development of Bi- and Tri-Layer Nanofibrous Membranes Based on the Sulfated Polysaccharide Carrageenan for Periodontal Tissue Regeneration

Periodontitis is a microbially-induced inflammation of the periodontium that is characterized by the destruction of the periodontal ligament (PDL) and alveolar bone and constitutes the principal cause of teeth loss in adults. Periodontal tissue regeneration can be achieved through guided tissue/bone regeneration (GTR/GBR) membranes that act as a physical barrier preventing epithelial infiltration and providing adequate time and space for PDL cells and osteoblasts to proliferate into the affected area. Electrospun nanofibrous scaffolds, simulating the natural architecture of the extracellular matrix (ECM), have attracted increasing attention in periodontal tissue engineering. Carrageenans are ideal candidates for the development of novel nanofibrous GTR/GBR membranes, since previous studies have highlighted the potential of carrageenans for bone regeneration by promoting the attachment and proliferation of osteoblasts. Herein, we report the development of bi- and tri-layer nanofibrous GTR/GBR membranes based on carrageenans and other biocompatible polymers for the regeneration of periodontal tissue. The fabricated membranes were morphologically characterized, and their thermal and mechanical properties were determined. Their periodontal tissue regeneration potential was investigated through the evaluation of cell attachment, biocompatibility, and osteogenic differentiation of human PDL cells seeded on the prepared membranes.

pH-Sensitive Poly(acrylic acid)-g-poly(L-lysine) Charge-Driven Self-Assembling Hydrogels with 3D-Printability and Self-Healing Properties

We report the rheological behavior of aqueous solutions of a graft copolymer polyampholyte, constituted of polyacrylic acid (PAA) backbone grafted by Poly(L-lysine) (PAA-b-PLL). The graft copolymer self-assembles in aqueous media, forming a three-dimensional (3D) network through polyelectrolyte complexation of the oppositely charged PAA and PLL segments. Rheological investigations showed that the hydrogel exhibits interesting properties, namely, relatively low critical gel concentration, elastic response with slow dynamics, remarkable extended critical strain to flow, shear responsiveness, injectability, 3D printability and self-healing. Due to the weak nature of the involved polyelectrolyte segments, the hydrogel properties display pH-dependency, and they are affected by the presence of salt. Especially upon varying pH, the PLL secondary structure changes from random coil to α-helix, affecting the crosslinking structural mode and, in turn, the overall network structure as reflected in the rheological properties. Thanks to the biocompatibility of the copolymer constituents and the biodegradability of PLL, the designed gelator seems to exhibit potential for bioapplications.

NIPAm-Based Modification of Poly(L-lysine): A pH-Dependent LCST-Type Thermo-Responsive Biodegradable Polymer

Polylysine is a biocompatible, biodegradable, water soluble polypeptide. Thanks to the pendant primary amines it bears, it is susceptible to modification reactions. In this work Poly(L-lysine) (PLL) was partially modified via the effortless free-catalysed aza-Michael addition reaction at room temperature by grafting N-isopropylacrylamide (NIPAm) moieties onto the amines. The resulting PLL-g-NIPAm exhibited LCST-type thermosensitivity. The LCST can be tuned by the NIPAm content incorporated in the macromolecules. Importantly, depending on the NIPAm content, LCST is highly dependent on pH and ionic strength due to ionization capability of the remaining free lysine residues. PLL-g-NIPAm constitutes a novel biodegradable LCST polymer that could be used as “smart” block in block copolymers and/or terpolymers, of any macromolecular architecture, to design pH/Temperature-responsive self-assemblies (nanocarriers and/or networks) for potential bio-applications.

A glucose-based molecular rotor inhibitor of glycogen phosphorylase as a probe of cellular enzymatic function

Molecular rotors belong to a family of fluorescent compounds characterized as molecular switches, where a fluorescence on/off signal signifies a change in the molecule’s microenvironment. Herein, the successful synthesis and...

Chitosan Derivatives with Mucoadhesive and Antimicrobial Properties for Simultaneous Nanoencapsulation and Extended Ocular Release Formulations of Dexamethasone and Chloramphenicol Drugs

The aim of this work was to evaluate the effectiveness of neat chitosan (CS) and its derivatives with 2-acrylamido-2-methyl-1-propanesulfonic acid (AAMPS) and [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (MEDSP) as appropriate nanocarriers for the simultaneous ocular administration of dexamethasone sodium phosphate (DxP) and chloramphenicol (CHL). The derivatives CS-AAMPS and CS-MEDSP have been synthesized by free-radical polymerization and their structure has been proved by Fourier-Transformed Infrared Spectroscopy (FT-IR) spectroscopy. Both derivatives exhibited low cytotoxicity, enhanced mucoadhesive properties and antimicrobial activity against Staphylococcus aureus (S.aureus) and Escherichia coli (E. coli). Encapsulation was performed via ionic crosslinking gelation using sodium tripolyphosphate (TPP) as the crosslinking agent. Dynamic light scattering measurements (DLS) showed that the prepared nanoparticles had bimodal distribution and sizes ranging from 50–200 nm and 300–800 nm. Drugs were encapsulated in their crystalline (CHL) or amorphous (DexSP) form inside nanoparticles and their release rate was dependent on the used polymer. The CHL dissolution rate was substantially enhanced compared to the neat drug and the release time was extended up to 7 days. The release rate of DexSP was much faster than that of CHL and was prolonged up to 3 days. Drug release modeling unveiled that diffusion is the main release mechanism for both drugs. Both prepared derivatives and their drug-loaded nanoparticles could be used for extended and simultaneous ocular release formulations of DexSP and CHL drugs.

Self-Healing pH- and Enzyme Stimuli-Responsive Hydrogels for Targeted Delivery of Gemcitabine To Treat Pancreatic Cancer

A novel, multifunctional hydrogel that exhibits a unique set of properties for the effective treatment of pancreatic cancer (PC) is presented. The material is composed of a pentablock terpolypeptide of the type PLys- b-(PHIS- co-PBLG)-PLys- b-(PHIS- co-PBLG)- b-PLys, which is a noncytotoxic polypeptide. It can be implanted via the least invasive route and selectively delivers gemcitabine to efficiently treat PC. Simply mixing the novel terpolypeptide with an aqueous solution of gemcitabine within a syringe results in the facile formation of a hydrogel that has the ability to become liquid under the shear rate of the plunger. Upon injection in the vicinity of cancer tissue, it immediately reforms into a hydrogel due to the unique combination of its macromolecular architecture and secondary structure. Because of its pH responsiveness, the hydrogel only melts close to PC; thus, the drug can be delivered directionally toward the cancerous rather than healthy tissues in a targeted, controlled, and sustained manner. The efficacy of the hydrogel was tested in vivo on human to mouse xenografts using the drug gemcitabine. It was found that the efficacy of the hydrogel loaded with only 40% of the drug delivered in one dose was equal to or slightly better than the peritumoral injection of 100% of the free drug delivered in two doses, the typical chemotherapy used in clinics so far. This result suggests that the hydrogel can direct the delivery of the encapsulated drug effectively in the tumor tissue. Enzymes lead to its biodegradation, avoiding removal by resection of the polypeptidic carrier after cargo delivery. The unique properties of the hydrogel formed can be predetermined through its molecular characteristics, rendering it a promising modular material for many biological applications.

Polymersomes with asymmetric membranes and self-assembled superstructures using pentablock quintopolymers resolved by electron tomography

Polystyrene-block-poly(1,4-isoprene)-block-poly(dimethyl siloxane)-block-poly(tert-butyl methacrylate)-block-poly(2-vinyl pyridine), PS-b-PI-b-PDMS-b-PtBMA-b-P2VP, self-assembles in acetone into polymersomes with asymmetric (directional) PI-b-PDMS membranes.

Micelles Formed by Polypeptide Containing Polymers Synthesized Via N-Carboxy Anhydrides and Their Application for Cancer Treatment

The development of multifunctional polymeric materials for biological applications is mainly guided by the goal of achieving the encapsulation of pharmaceutical compounds through a self-assembly process to form nanoconstructs that control the biodistribution of the active compounds, and therefore minimize systemic side effects. Micelles are formed from amphiphilic polymers in a selective solvent. In biological applications, micelles are formed in water, and their cores are loaded with hydrophobic pharmaceutics, where they are solubilized and are usually delivered through the blood compartment. Even though a large number of polymeric materials that form nanocarrier delivery systems has been investigated, a surprisingly small subset of these technologies has demonstrated potentially curative preclinical results, and fewer have progressed towards commercialization. One of the most promising classes of polymeric materials for drug delivery applications is polypeptides, which combine the properties of the conventional polymers with the 3D structure of natural proteins, i.e., α-helices and β-sheets. In this article, the synthetic pathways followed to develop well-defined polymeric micelles based on polypeptides prepared through ring-opening polymerization (ROP) of N-carboxy anhydrides are reviewed. Among these works, we focus on studies performed on micellar delivery systems to treat cancer. The review is limited to systems presented from 2000⁻2017.

Exploring the interactions of irbesartan and irbesartan-2-hydroxypropyl-β-cyclodextrin complex with model membranes

The interactions of irbesartan (IRB) and irbesartan-2-hydroxypropyl-β-cyclodextrin (HP-β-CD) complex with dipalmitoyl phosphatidylcholine (DPPC) bilayers have been explored utilizing an array of biophysical techniques ranging from differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS), ESI mass spectrometry (ESI-MS) and solid state nuclear magnetic resonance (ssNMR). Molecular dynamics (MD) calculations have been also conducted to complement the experimental results. Irbesartan was found to be embedded in the lipid membrane core and to affect the phase transition properties of the DPPC bilayers. SAXS studies revealed that irbesartan alone does not display perfect solvation since some coexisting irbesartan crystallites are present. In its complexed form IRB gets fully solvated in the membranes showing that encapsulation of IRB in HP-β-CD may have beneficial effects in the ADME properties of this drug. MD experiments revealed the topological and orientational integration of irbesartan into the phospholipid bilayer being placed at about 1nm from the membrane centre.

pH-Sensitive nanogates based on poly(l-histidine) for controlled drug release from mesoporous silica nanoparticles

Mesoporous silica nanoparticles (MSNs) bearing poly(l-histidine)-grafted nanogates were prepared by surface-initiated ROP. The obtained polypeptide-functionalized MSNs were used as smart pH-responsive nanocarriers for controlled drug release applications.

Complexation-Driven Mutarotation in Poly(L-proline) Block Copolypeptides

Novel poly(L-lysine)-block-poly(L-proline) (PLL-b-PLP)-based materials with all PLP helical conformers, i.e., PLP II and the rare PLP I are here reported. Electrostatic supramolecular complexation of the adjacent cationic PLL with anionic molecules bearing DNA analogue H-bonding functionalities, such as deoxyguanosine monophosphate (dGMP), preserves the extended PLP II helix, and the complexed molecule is locked and held in position by orthogonal shape-persistent hydrogen-bonded dGMP ribbons and their extended π-stacking. The branched anionic surfactant dodecylbenzenesulfonic acid (DBSA) on the other hand, introduces periodicity frustration and interlayer plasticization, leading to a reversed mutarotation to the more compact PLP I helix by complexation, without external stimuli, and is here reported for the first time. We foresee that our findings can be used as a platform for novel molecularly adaptive functional materials, and could possibly give insight in many proline-related transmembrane biological functions.

Polymersomes from polypeptide containing triblock Co- and terpolymers for drug delivery against pancreatic cancer: asymmetry of the external hydrophilic blocks

Well-defined amphiphilic polymers of the ABA and ABC type are synthesized, where A is poly(L-lysine hydrochloride) (PLL), B is poly(γ-benzyl-(d7) L-glutamate) (PBLG(-d7)), and C is poly(ethylene oxide) (PEO). The two polymers exhibit similar PBLG(-d7) composition, while in the ABC, the volume fraction of PEO block is higher than that of PLL. Both polymers form polymersomes in water. The polymersomes are loaded with doxorubicin or paclitaxel. It is found that in the ABC, due to asymmetry of the two hydrophilic blocks, PEO is always on the outer periphery and the dimensions of the vesicles are smaller. The release of the vesicles is temperature- and pH-dependent. In vivo toxicity tests of the empty vesicles show that they are not toxic. In vitro activity of the loaded vesicles against human pancreatic cancer cell lines reveals comparable activity to Myocet for the ABA loaded with doxorubicin, while lower activity is observed for the ABC.

Controlled polymerization of histidine and synthesis of well-defined stimuli responsive polymers. Elucidation of the structure–aggregation relationship of this highly multifunctional material

Synthesis of multifunctional poly(l-histidine) containing polypeptides and hybrid polymers for controlled drug delivery applications.

Probing glassy states in binary mixtures of soft interpenetrable colloids

We present experimental evidence confirming the recently established rich dynamic state diagram of asymmetric binary mixtures of soft colloidal spheres. These mixtures consist of glassy suspensions of large star polymers to which different small stars are added at varying concentrations. Using rheology and dynamic light scattering measurements along with a simple phenomenological analysis, we show the existence of re-entrance and multiple glassy states, which exhibit distinct features. Cooperative diffusion, as a probe for star arm interpenetration, is proven to be sensitive to the formation of the liquid pockets which signal the melting of the large-star-glass upon addition of small stars. These results provide ample opportunities for tailoring the properties of soft colloidal glasses.

Asymmetric caging in soft colloidal mixtures

The long-standing observations that different amorphous materials exhibit a pronounced enhancement of viscosity and eventually vitrify on compression or cooling continue to fascinate and challenge scientists, on the ground of their physical origin and practical implications. Glass formation is a generic phenomenon, observed in physically quite distinct systems that encompass hard and soft particles. It is believed that a common underlying scenario, namely cage formation, drives dynamical arrest, especially at high concentrations. Here, we identify a novel, asymmetric glassy state in soft colloidal mixtures, which is characterized by strongly anisotropically distorted cages, bearing similarities to those of hard-sphere glasses under shear. The anisotropy is induced by the presence of soft additives. This phenomenon seems to be generic to soft colloids and its origins lie in the penetrability of the constituent particles. The resulting phase diagram for mixtures of soft particles is clearly distinct from that of hard-sphere mixtures and brings forward a rich variety of vitrified states that delineate an ergodic lake in the parameter space spanned by the size ratio between the two components and by the concentration of the additives. Thus, a new route opens for the rational design of soft particles with desired tunable rheological properties.

Architecturally Induced Multiresponsive Vesicles from Well-Defined Polypeptides. Formation of Gene Vehicles

A series of novel, partially labeled amphiphilic triblock copolypeptides, PLL-b-PBLG-d7-b-PLL, has been synthesized, where PLL and PBLG-d7 are poly(L-lysine hydrochloride) and poly(gamma-benzyl-d7-L-glutamate), respectively. The synthetic approach involved the sequential ring-opening polymerization (ROP) of gamma-benzyl-L-glutamate and epsilon-Boc-L-lysine N-carboxy anhydrides by a diamino initiator using high-vacuum techniques, followed by the selective deprotection of the Boc groups. Combined characterization results showed that the copolypeptides exhibit high degrees of molecular and compositional homogeneity. The synthesized copolypeptides had similar molecular weights, while the composition of the middle block ranged between 19 and 74% with respect to the monomeric units. Due to the macromolecular architecture of the copolypeptide and the rigid nature of the middle block, the formation of monolayers was favored, and, surprisingly, vesicles were formed in water at neutral pH over the entire compositional range. The vesicular structures were extensively characterized by static and dynamic light scattering, small-angle neutron scattering, atomic force microscopy, cryo-transmission electron microscopy, scanning electron microscopy, UV and Fourier transform infrared spectroscopy, and circular dichroism. In contrast to other vesicular structures derived from conventional polymers, the formed polypeptidic vesicles possess the unique feature of being stimuli-responsive to pH and temperature. When the copolypeptides were mixed with plasmid DNA (pDNA), large vesicular structures were also formed. The molecular characterization of the vectors was performed with most of the methods mentioned above, and indicated that the pDNA is both partially condensed on the PLL phase and partially encapsulated inside the vesicle. Consequently, the synthesized vectors combine the advantages of the polylysine-DNA systems to condense large amounts of genes, as well as those of the liposome-DNA systems to better protect the encapsulated DNA. These vectors are expected to present better gene transfection efficiency to the cell nucleus.