Occurrence of microplastics and phthalate esters in urban runoff: A focus on the Persian Gulf coastline

Urban runoff seems an obvious pathway for the transfer of microplastics (MPs) and phthalate acid esters (PAEs) from land-based sources to the marine environment; an issue that still lacks attention. This study presents the first results on MP and PAE levels in the urban runoff into the northern part of the Persian Gulf during the dry season. Average concentrations of MPs and PAEs in the urban runoff of eight selected sampling sites (N = 72) along the Bushehr coast were 1.86 items/L and 53.57 μg/L, respectively. MPs with a size range of 500-1000 μm had the highest abundance, and the mean levels of PAEs in MPs were 99.77 μg/g. The results of this study show that urban runoff is a main source of MP and PAE contaminants that are discharged into the Persian Gulf. Therefore, to decrease these pollutants from entering the aquatic environment, decision-makers in the area should consider this problem and stop the direct discharging of urban runoff into water bodies.

Phthalate acid esters (PAEs) accumulation in coastal sediments from regions with different land use configuration along the Persian Gulf

Phthalate acid esters (PAEs) are widely used as plasticizers in various plastic products and have aroused considerable concern over their ubiquitous presence and potentially hazardous effects on the environment. This research provides the first data on PAEs distribution in the sediments of northern part of the Persian Gulf. To determine the concentration of 16 PAEs, 26 samples of sediments were collected from industrial stations (IS), urban stations (US), agricultural stations (AGS), and natural field stations (NS) from Asalouyeh Harbor coasts from Nov 2016 to Jan 2017. The mean values of Ʃ16PAEs in the samples taken from IS, AGS, US, and NS were 78.08, 11.69, 46.56, and 5.180 µg/g, respectively. The results indicated that the mean concentrations of Ʃ16PAEs in the samples taken from IS and AGS areas were significantly higher (p < 0.05) than the ones taken from US and NS areas. The order of PAEs concentrations in sediment samples were as di(2-ethylhexyl) phthalate (DEHP), di-n-butyl phthalate (DnBP), butylbenzyl phthalate (BBP), and di-n-octyl phthalate (DnOP), respectively. DEHP was detected in all collected samples and the mean ± SD of its concentration in the IS, US, AGS, and NS regions were as 28.15 ± 4.9, 4.040 ± 0.53, 11.58 ± 1.2, and 1.780 ± 0.78 µg/g, respectively. The major sources of PAEs in the sediments collected from the study region were associated with the industrial and agricultural activities. The findings of this study indicated that the sediments of the Asalouyeh coasts are heavily contaminated with PAEs. They have shown potential ecotoxicological effects on the aquatic organisms and benthic. Therefore, more attention should be paid to prediction of the marine ecosystem in this region by the authorities.

Levels and ecological and health risk assessment of PM2.5-bound heavy metals in the northern part of the Persian Gulf

Bushehr, a port along the northern part of the Persian Gulf, has repeatedly encountered dust storms in recent years but there is not been a comprehensive study on the PM_2.5 contents in this region. The present study reports the characteristics and health risks of atmospheric PM_2.5-bound heavy metals (HMs) in Bushehr from December 2016 to September 2017. A total of 46 samples were analyzed, and a high volume air sampler equipped with quartz fiber filters was used for sampling. Inductively coupled plasma optical emission spectroscopy (ICP-OES) was also used for HMs analyses. Risk assessment and hazard index (HI) of these metals were computed by using USEPA's exposure parameters. The results showed that the average 24-h mass concentration of PM_2.5 ranged from 22.09 to 292.45 μg/m³. The results also indicated that 95.65 and 82.61% of the samples were higher than WHO and EPA guidelines for 24-h PM_2.5. Also there was no statistically significant relationship between wind direction and PM_2.5.The average concentration levels of seven measured metals (Cd, Co, Cr, Fe, Ni, Pb, and V) in the PM_2.5 samples were in the range of 6.03 ng/m³ to 1335.94 ng/m³, and the order of their concentration was Fe > Ni > Pb > Cr > Cd > V > Co. Principal component analysis (PCA) showed that PM_2.5-bound heavy metals were categorized in three groups. The ecological risk level of calculated metals was very significant, and the major contribution of the ecological risk was related to Cd. The highest HQ in children and adults was related to Cr, and overall HI in children was higher than adults. Also the RI values of Cr in both groups of children and adults were indicated high risk of developing cancer in human.

Extraction and determination of heavy metals in soil and vegetables irrigated with treated municipal wastewater using new mode of dispersive liquid-liquid microextraction based on the solidified deep eutectic solvent followed by GFAAS

BACKGROUND

In this research, a new extraction method based on dispersive liquid-liquid microextraction and the solidification of deep eutectic solvent has been developed for the determination of heavy metals in soil and vegetables prior to their analysis by graphite furnace atomic absorption spectrometry (GFAAS). In this method, a green solvent consisting of 1-decyl-3-methylimidazolium chloride and 1-undecanol was used as an extraction solvent, yielding the advantages of material stability, low density and a suitable freezing point near room temperature.

RESULTS

Under optimal conditions, enrichment factors are in the range of 114-172. The calibration graphs are linear in the range of 0.02-200 µg kg^-1 and limits of detection are in the range of 0.01-0.03 µg kg^-1 . Repeatability and reproducibility of the method based on seven replicate measurements of 0.80 µg kg^-1 of Hg and 0.20 µg kg^-1 of Pb and Cd in analyzed samples were in the range of 2.3-4.1% and 3.7-6.6%, respectively.

CONCLUSION

A new deep eutectic solvent consists of two parts: 1-decyl-3-methylimidazolium chloride and 1-undecanol in a molar ratio of 1:2. The accuracy of the proposed procedure was also assessed by determining the concentration of the studied metal ions in a polluted farmland soil standard reference material. © 2018 Society of Chemical Industry.

The effect of land use configurations on concentration, spatial distribution, and ecological risk of heavy metals in coastal sediments of northern part along the Persian Gulf

In the present study, a total of 41 sediment samples were collected from the areas with different land uses: industrial (IS), urban (US), agricultural (AGS), and natural field (NS) in the northern coasts along the Persian Gulf from November 2016 to January 2017. Samples were analyzed to determine the concentration of heavy metals (Zn, Cu, Pb, Cd, Cr, and Ni). The mean concentration of Ʃ6 heavy metals in the samples taken from IS, US, AGS, NS were 2300.24, 251.02, 553.21, and 40.93 mg/kg, respectively. The predominant metals were Zn, Cu, and Pb and the mean concentrations of Ʃ3 metals (Zn, Cu, and Pb) in IS, US, AGS, NS areas were 2245.6, 241.44, 529.61, and 36.98 mg/kg, respectively. The results indicated that the mean concentrations of Ʃ6Metals/Ʃ3 metals in the IS and AGS samples were significantly higher than US and NS samples (p < 0.05). Heavy metal levels (mg/kg. dry weight) in all four land uses were as follows: industrial region: Pb (1347.44) > Cu (465.00) > Zn (427.16) > Cr (34.20) > Cd (19.45) > Ni (7.09); urban region: Zn (97.45) > Cu (79.90) > Pb (64.09) > Cr (5.30) > Ni (2.55) > Cd (1.73); agricultural region: Zn (247.88) > Pb (164.89) > Cu (116.84) > Cr (11.09) > Ni (7.45) > Cd (5.06); and natural fields: Zn (27.43) > Cu (6.34) > Pb (3.18) > Cr (1.94) > Ni (1.18) > Cd (0.83). According to geo-accumulation index (I-geo), the IS, US, and AGS were classified into "highly-extremely polluted", "unpolluted-moderately polluted" and "highly polluted", respectively. Similarly, in accordance with the ecological risk index (ERI), the IS and AGS fell into the very high and considerable categories, respectively, while US land uses area was categorized as low risk. Based on the results obtained from the present study, it can be concluded that the sediments of Asalouyeh coasts in the northern part of the Persian Gulf are heavily contaminated with heavy metals, causing serious negative effects on both the human being and environment.

Occurrence and exposure assessment of microplastics in indoor dusts of buildings with different applications in Bushehr and Shiraz cities, Iran

The increase in annual usage of plastics for different purposes has led to an increase in microplastics (MPs) particles in various environments including inside of buildings. In the present study, levels and characteristics of MPs in the indoor dust of buildings with different uses including residential house, mosque, hospital, kindergarten, and university in two cities, Bushehr port and Shiraz in Iran, were determined. Thirty dust samples from various buildings were collected. The average numbers of MPs in the indoor dust of buildings of Shiraz and Bushehr were 90.8 and 80.8 items/mg, respectively. Fiber and polyethylene (PE) were the most common shape and polymer types of identified MPs, respectively. The highest number of MPs was observed in the indoor dust of kindergartens with a mean number of 121 items/mg in Bushehr and 104 items/mg in Shiraz. Except for mosques, a significant difference (p-value <0.05) were not observed between the MPs levels of buildings with similar applications in Bushehr and Shiraz cities. In addition, the high daily intake to MPs via indoor dust ingestion and inhalation were found for infants in kindergartens and mosques. The results of this study showed that MPs are present in high concentrations in indoor environments and may pose a high exposure risk for different age groups.

BTEX in indoor air of beauty salons: Risk assessment, levels and factors influencing their concentrations

Concentrations of benzene, toluene, ethylbenzene, and xylene (BTEX) were investigated in indoor air quality of 50 beauty salons in Ardabil, Iran (2017). Ten liters of air samples were collected from each salons regarding the recommended method and analyzed by GC-FID for BTEX concentration. Also, structural and operational conditions of the salons were studied with a self-designed questioner. The results of this study show that the mean concentration of benzene (32.40 ± 26.38) higher than the recommended levels by Health Canada, ANSES and HKSAR. Among the BTEX, ethylbenzene (62.38 ± 32.37) has the most concentrations in the salons. Subsequently, the cancer risk values in different age groups of birth to <6, 6 to <21, and 21 to <81 for benzene (1.83 × 10^-3, 2.76 × 10^-4 and 1.50 × 10^-4, respectively) and ethylbenzene (4.9 × 10^-4, 7.30 × 10^-5 and 3.52 × 10^-5, respectively) for long time exposure were drastically higher than the recommended levels. The results showed that the benzene concentration is significantly influenced by the structural and operational conditions of type of ventilation system, area of the salons, the number of people in the salon, number of services in the salons, and while doing of bridal makeup.

Knowledge, attitude and practices of farmers about pesticide use, risks, and wastes; a cross-sectional study (Kermanshah, Iran)

This study was aimed to investigate the knowledge, attitude, and behavior of farmers about the pesticide use and wastes, and to determine the factors affecting the use of pesticides and their health effects, in agricultural lands located in Kermanshah province, western Iran. Three hundred eleven (311) farmers were included in this study, and filled a structured questionnaire containing questions about their basic information, their knowledge and attitude regarding pesticides, and their practices for pesticide disposal. In addition, the type and amount of pesticide consumption, and the health symptoms during the last year were recorded. Prevalence ratios and linear regression were used to evaluate the association between the different factors, and health symptoms and the amount of pesticide use, respectively. The majority of respondents had not been trained formally for the use of pesticides before. Approximately 10%, 45%, and 17% of pesticides contained highly hazardous, moderately hazardous, and slightly hazardous compounds, respectively. The farmers mainly had incorrect knowledge about pesticides and their risks, and used incorrect and high-risk methods for handling and application of pesticides and relevant wastes. Health symptoms were more associated with age ≥ 65, having no education, having income < 482 USD, not trained for pesticide use, and applying highly hazardous pesticides. In addition, the factors contributing to the amount of pesticide use included age, education level, and pesticide training. In order to reduce the amount of pesticide released to the environment, comprehensive training programs and implementing a waste management system could be effective.

Organochlorine pesticides contamination in agricultural soils of southern Iran

There is limited information about pesticide contamination in Iran's agricultural land, particularly in plains producing exportable fruits. The aim of this investigation was to evaluate the concentration of organochlorine pesticides (OCPs) including hexachlorocyclohexane (HCH), heptachlor, dichloro-diphenyl-trichloroethane (DDT), chlordane (CHL), and their isomers compounds in agricultural soils of southern Iran. A total of 28 topsoil samples were collected from agricultural lands of Dalaki and Shabankare areas, Bushehr, Iran. In Dalaki area, the mean value of ΣHCH (α, β, γ, δ), ΣDDT (o,p-DDE, o,p-DDD, o,p-DDT, p,p-DDE, p,p-DDD, p,p-DDT, and DDT), and ΣCHL (Trans-chlordane, Cis-chlordane, Heptachlor-exo-epoxide, and Heptachlor) was found to be 0.411 ng/g (dry weight, dw), 4.37 ng/g dw, and 2.04 ng/g dw, respectively. In Shabankare area the mean value of ΣHCH, ΣDDT, and ΣCHL was measured to be 1.38 ng/g dw, 11.99 ng/g dw, and 1.62 ng/g dw, respectively. The concentration trend of pesticides in both areas was as follows: DDT > CHL > HCH. Source identification indicated recent usage of HCH and DDT in the studied areas. Obtaining a cis-chlordane/trans-chlordane ratio greater than one in Shabankare farmlands showed that chlordane was not used recently. The health risk assessment showed that children and adults groups in both areas are exposed to negligible cancer risk. More serious attempts are necessary to reduce usage of OCPs during the agricultural process and the protection of soil and human health in the studied areas.

Assessment of sediment quality based on acid-volatile sulfide and simultaneously extracted metals in heavily industrialized area of Asaluyeh, Persian Gulf: concentrations, spatial distributions, and sediment bioavailability/toxicity

Sediment samples from the coastal area of Asaluyeh harbor were collected during autumn and spring 2015. The acid-volatile sulfide (AVS) and simultaneously extracted metals (SEMs) were measured to assess the sediment quality and potential ecological risks. The average concentrations (and relative standard deviation (RSD)) of AVS in the industrial sediments were 12.32 μmol/g (36.91) and 6.34 μmol/g (80.05) in autumn and spring, respectively, while in the urban area, these values were 0.44 μmol/g (123.50) and 0.31 μmol/g (160.0) in autumn and spring, respectively. The average concentrations of SEM (and RSD) in the industrial sediments were 15.02 μmol/g (14.38) and 12.34 μmol/g (20.65) in autumn and spring, respectively, while in the urban area, these values were 1.10 μmol/g (43.03) and 1.06 μmol/g (55.59) in autumn and spring, respectively. Zn was the predominant component (34.25-86.24 %) of SEM, while the corresponding value for Cd, much more toxic ingredient, was less than 1 %. Some of the coastal sediments in the harbor of Asaluyeh (20 and 47 % in autumn and spring, respectively) had expected adverse biological effects based on the suggested criterion by United States Environmental Protection Agency (USEPA), while most stations (80 and 53 % in autumn and spring, respectively) had uncertain adverse effects.

Characteristics, distribution and sources of polychlorinated biphenyls (PCBs) in coastal sediments from the heavily industrialized area of Asalouyeh, Iran

In this research, the levels of polychlorinated biphenyls (PCBs) were investigated in the marine sediments of Asaluyeh harbor, in the Persian Gulf. The samples were taken from industrial, semi-industrial and urban regions. The mean concentration levels of total (Σ) 18 detected PCBs were 514.32, 144.67 and 31.6 pg/g dw for the industrial, semi-industrial and urban sampling stations, respectively. Based on a multivariate statistical analysis, it was found that high contamination levels of PCBs in sediments collected along the Persian Gulf were associated with releases from local industries. Total organic carbon (TOC) content was significantly and positively correlated with the concentrations of PCB congeners. World Health Organization toxic equivalents (TEQs) for PCBs ranged from 0.04 to 2.66 pg TEQ/g dry weight (dw) in the coastal sediments. The TEQ values in this study were higher than many reported worldwide in the literature for sediments. This suggests that there are high levels of contamination in the area due to industrial and other human activities.

Polycyclic aromatic hydrocarbons (PAHs) in coastal sediments from urban and industrial areas of Asaluyeh Harbor, Iran: distribution, potential source and ecological risk assessment

The distribution and toxicity levels of 16 EPA priority pollutant polycyclic aromatic hydrocarbons (PAHs) in the sediments of Asaluyeh shore, Iran were investigated. The total concentrations of the PAHs in surface sediments ranged from 1,054 to 17,448 ng/g dry weights with a mean concentration of 8,067 ng/g. The spatial distribution of PAHs showed that PAH levels are much higher in the industrial areas in comparison with urban areas. Based on diagnostic ratios, pyrogenic activities were dominant sources of PAHs pollution in sediments comparing petroleum sources. The toxic equivalent concentrations (TEQ Carc) of PAHs ranged from 172 to 2,235 ng TEQ/g with mean value of 997.9. Toxicity levels were evaluated using sediment quality guidelines (SQGs) and toxic equivalent factors. Samples were collected from industrial and urban stations in Asaluyeh shores. According to SQGs, ΣPAHs concentrations in sediments of urban areas were below the ERL (effects range low), but the industrial samples had ΣPAHs concentrations between ERL and ERM (effects range median). Furthermore, ΣHPAHs (heavy PAHs) and some individual PAHs in some industrial stations exceeded ERM, indicating adverse ecological risk effects frequently occur. Findings demonstrate that the surface sediment from Asaluyeh shore is highly to very highly contaminated with PAHs.

Levels and health risk assessments of particulate matters (PM2.5 and PM10) in indoor/outdoor air of waterpipe cafés in Tehran, Iran

To determine the concentration of particulate matters (PM2.5 and PM10), 36 samples were collected from indoor/outdoor air of hookah cafés (HS), cigarette cafés (CS), both hookah and cigarette (HCS), and no-smoking building (NS) in Tehran City from December 2017 to March 2018. The mean ± SD of PM10 concentration in the indoor air of the cafés in terms of HS, CS, HCS, and NS sites has been 702.35, 220.20, 1156.60, and 60.12 μg/m3, while for PM2.5, the values have been 271.92, 111.80, 619.10, and 22.25 μg/m3, respectively. It was also found that the PM concentration inside the cafés was higher during weekend session (with a higher number of active smokers), than during the weekday sessions. Moreover, the PM levels in the indoor air of the cafés were considerably higher than those of the outdoors (p < 0.05). Based on path analysis, the number of "active smokers" had the highest influence on production of PM inside the cafés, followed by the tobacco type. Finally, the mean excess lifetime cancer risk (ELCR) for PM2.5 in the indoor air of cafés was observed in the range of 0.64 × 10-5-14.98 × 10-5. Also, the mean of hazard quotient (HQ) for PM2.5 and PM10 was calculated in range of 0.82-18.4 and 0.16-3.28, respectively, which corresponds to an unacceptably high risk for human health. The PM levels in the indoor air of smoking cafés in Tehran are significantly high, such that it can cause serious risks for the health of both the customers and personnel. Thus, it is necessary that suitable controlling strategies be adopted for this public health threat.

Characterization, possible sources and health risk assessment of PM2.5-bound Heavy Metals in the most industrial city of Iran

Air pollution associated with particulate matters results in different types of disease including allergy, lung destruction, heart failure, and related problems. This study has been designed and performed to examine the concentration of PM_2.5-bound heavy metals, risk assessment, possible sources and effect of meteorological parameters on 17 sites of the air of the most industrial city of Iran (Karaj) in 2018-19. For this purpose, four samples were taken from every point of Karaj air over one year using a pump (Leland Legacy (SKC)) with flow rate of 3 L/min on PTFE filter for 24 h. Overall, 68 samples of PM_2.5-bound heavy metals were collected. Note that during the sampling, atmospheric parameters including temperature, pressure, humidity, and wind speed were regularly recorded using PHB318 portable device. In examining the chemical composition of these particles, the concentration of metals (Al-Zn- Ar-Cd-Cr-Cu-Fe-Hg-Mn-Ni-Pb) was determined after digestion of the collected samples and through injection into ICP-OEC device. The results indicated that the mean annual concentration of PM_2.5 particles range from 21.84 to 72.75 µg/m³. The mean concentration of heavy metals lied within the range of 25.63 to 336.27 ng/m³. Among heavy metals, the maximum concentration belonged to aluminum (277.95 ng/m³) and iron (336.27 ng/m³), which are known as elements with a ground source (sources such as car fuels, exhaust gases, decorative materials, batteries, indoor smoking, the paint used for painting walls, erosion and corrosion of rubber of cars). Meanwhile, there was a positive relationship between heavy metals and temperature(r: 0.418, p < 0.019), pressure (r: 0.184, p < 0.0.402), as well as wind speed (r: 0.38, p < 0.017), while an inverse relationship was observed with relative humidity (r: -0.219, p < 0.018). The ecological risk of the metals calculated was very notable, with the maximum environmental risk being related to cadmium in children (6.61) and manganese in adults (0.82). The largest HQ in children and adults was associated with Cr. Finally, ILCR values for cadmium in both children (1.19 E-04) and adult (4.81 E-04) groups indicated high risk of developing cancer in humans.

Air pollutants associated with smoking in indoor/outdoor of waterpipe cafés in Tehran, Iran: Concentrations, affecting factors and health risk assessment

Despite increasingly growth in waterpipe smoking in Tehran, so far no study has been conducted on the air quality of the waterpipe and cigarette cafés. Thirty-six cafés were selected and the concentration of three pollutants including formaldehyde, carbon monoxide and nicotine were measured in both indoor and outdoor air of cafés two times (week-day and weekend's session). Air sampling was performed for 180 min for each pollutant. It was observed that the concentration of pollutants inside the cafés was higher during weekend session (with a higher number of "active waterpipe heads") compared with findings during the week-day sessions. Furthermore, the concentration of pollutants in the indoor air of the cafés was significantly higher than that of the outdoors (p < 0.05). According to path analysis, the number of "active waterpipe heads" had the maximum impact on generation of pollutants inside the cafés, followed by the type of tobacco as the second influential factor. The average of lifetime cancer risk (LTCR) resulted by formaldehyde exposure through inhalation in waterpipe (WS), cigarette (CS), waterpipe and cigarette (WCS) and none-smoking (NS) cafés in week-day and weekend sessions were estimated to be 111 × 10-5 and 61.2 × 10-5, 33.7 × 10-5 and 39.4 × 10-5, 271 × 10-5 and 322 × 10-5, and 4.80 × 10-5 and 5.90 × 10-5, respectively, which exceed the limit value by the U.S.EPA and WHO. The concentration of pollutants in the indoor air of smoking cafés in Tehran is significantly high, such that it can pose serious risks for the health of both personnel and customers. Therefore, decision makers are expected to enact applicable and strict policies so as to abate this public health risk.

Data on metal contents (As, Ag, Sr, Sn, Sb, and Mo) in sediments and shells of Trachycardium lacunosum in the northern part of the Persian Gulf

In this data article, by using inductively coupled plasma optical spectrometry (ICP-OES), we aimed to (1) determine the concentration levels of As, Ag, Sr, Sn, Sb, and Mo in the sediments and the shells of Trachycardium lacunosum simultaneously in two separated areas (unpolluted and polluted areas) (2) comparison between the metal contents of sediments in the unpolluted and polluted areas as well as shells. Analysis of data showed that sediment as well as shell samples in polluted area contained significantly higher concentration levels of all measured metals compared with unpolluted area.

Speciation of As(ΙΙΙ)/As(V) and Total Inorganic Arsenic in Biological Fluids Using New Mode of Liquid-Phase Microextraction and Electrothermal Atomic Absorption Spectrometry

In this paper, a new extraction method based on countercurrent liquid-liquid microextraction (CLLME) has been developed for the extraction and preconcentration of inorganic arsenic (iAs) in plasma and urine samples prior to their analysis by electrothermal atomic absorption spectrometry (ETAAS). In this method, firstly, 5 ml of water is added to the extraction vessel. Then 30.0 μl of the extracting solvent is added to it in order for the extracting solvent to be placed in the narrow-necked vessel. In total, 10 ml of a standard solution or a pretreated real sample is added to the sample container and it is connected to the extraction vessel via a connector. While opening the embedded valve at the bottom of the sample container and the one in the extraction vessel, the sample solution flows into the extracting solvent with the same flow rate, leading to the successful extraction of metal ligand into the extracting organic solvent. Under the optimum conditions, calibration curves are linear in the range of 0.1-50 μg l^-1, and limit of detections (LODs) are in the range of 0.03-0.05 μg l^-1. The enhancement factor and enrichment factor were in the range of 220-240 and 198-212, respectively. Repeatability (intra-day) and reproducibility (inter-day) of method based on seven replicate measurements of 5.0 μg l^-1 of arsenic were in the range of 2.3-3.5% and 4.0-5.7%, respectively. The applicability of the proposed CLLME and ETAAS methods was demonstrated by analyzing the iAs in spiked urine and plasma samples. The obtained recoveries of the arsenic in the range of 92-107% indicated the excellent capability of the developed method for speciation of arsenic from plasma and urine samples. Graphical Abstract ᅟ.

Efficient arsenic(V) removal from contaminated water using natural clay and clay composite adsorbents

The natural clay is an abundant, accessible, and low-cost material that has the potential for use in the water and wastewater industry. In this paper, Iranian natural clay and clay/Fe-Mn composite were used to remove toxic arsenic from the liquid environment. The natural clay and clay/Fe-Mn composite were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray (EDX), X-ray diffractometry (XRD), thermo-gravimetric analysis (TGA), and atomic force microscopy (AFM) techniques. The effects of parameters (initial pH, temperature, sorption dose, and contact time) on the efficiency and behavior of the arsenic(V) adsorption process were studied. Freundlich (R² = 0.945 and 0.989), Langmuir (R² = 0.922 and 0.931), modified Langmuir (R² = 0.921 and 0.929), and Dubinin-Radushkevich (R² = 0.706 and 0.723) models were fitted to evaluate the equilibrium data of arsenic(V) adsorption process by natural clay and clay/Fe-Mn composite, respectively. The Langmuir adsorption capacity of arsenic(V) by the natural clay and clay/Fe-Mn composite was determined to be 86.86 mg/g and 120.70 mg/g, respectively. The arsenic(V) adsorption process followed the pseudo-second-order model. Negative values of ΔG° and ΔH° showed that the arsenic(V) sorption by the studied materials is thermodynamically spontaneous and exothermic. According to the findings, the natural clay and clay/Fe-Mn are suitable and recyclable sorbents for arsenic(V) adsorption from aqueous solutions. Also, the composite of clay with iron and manganese can improve the efficiency of clay in the removal of arsenic.

Indicator bacteria community in seawater and coastal sediment: the Persian Gulf as a case

BACKGROUND

The aim of present work was to assess the concentration levels as well as vertical distribution of indicator bacteria including total coliform, fecal coliform, Pseudomonas aeruginosa, and Heterotrophic Plate Count (HPC) in the marine environment (seawater and coastal sediments) and evaluate the correlation between indicator bacteria and some physicochemical parameters of surface sediments as well as seawaters.

METHODS

A total number of 48 seawater and sediment samples were taken from 8 stations (each site 6 times with an interval time of 2 weeks) between June and September 2014. Seawater and sediment samples were collected from 30 cm under the surface samples and different sediment depths (0, 4, 7, 10, 15, and 20 cm) respectively, along the Persian Gulf in Bushehr coastal areas.

RESULTS

Based on the results, the average numbers of bacterial indicators including total coliform, fecal coliform, and Pseudomonas aeruginosa as well as HPC in seawater samples were 1238.13, 150.87, 8.22 MPN/100 ml and 1742.91 CFU/ml, respectively, and in sediment samples at different depths (from 0-20 cm) varied between 25 × 10³ to 51.67 × 10³, 5.63 × 10³ to 12.46 × 10³, 17.33 to 65 MPN/100 ml, 36 × 10³ to 147.5 × 10³ CFU/ml, respectively. There were no statistically significant relationships between the indicator organism concentration levels with temperature as well as pH value of seawater. A reverse correlation was found between the level of indicator bacteria and salinity of seawater samples. Also results revealed that the sediment texture influenced abundance of indicators bacteria in sediments. As the concentration levels of indicators bacteria were higher in muddy sediments compare with sandy ones.

CONCLUSION

Result conducted Bushehr coastal sediments constitute a reservoir of indicator bacteria, therefore, whole of the indicators determined were distinguished to be present in higher levels in sediments than in the overlying seawater. It was concluded that the concentration levels of microbial indicators decreased with depth in sediments. Except total coliform, the numbers of other bacteria including fecal coliform, Pseudomonas aeruginosa and HPC bacteria significantly declined in the depth between 10 and 15 cm.

Dataset for effect comparison of irrigation by wastewater and ground water on amount of heavy metals in soil and vegetables: Accumulation, transfer factor and health risk assessment

The irrigation source plays an important role in the amount of contaminates in soil and cultivated agricultural products. In this study, the concentration and human health risks of heavy metals (Zn, Mn, Cu, Cr, Cd and Pb) were evaluated in soil, water and vegetables collected from two sites (FGW: Farms irrigated with ground water, FWW: Farms irrigated with wastewater) of Bushehr, Iran. The trend of heavy metals concentration in vegetables from either site was in the following order: Mn ˃ Zn ˃ Cu ˃ Pb ˃ Cr ˃ Cd. Except Cd and Pb, the concentration of heavy metals was in the range of European Union (2006) permissible limit. THQ (Target hazard quotient) values were the highest in Mn followed by the Pb, Cd, Cu, Zn and Cr. Mn, Pb and Cd exceeded safe limit of THQ in several cases, while THQ of other heavy metals was in the range of safe limit. Based on the results, it can be concluded that heavy metals contamination in vegetables grown in Bushehr, especially in FWW site, may pose a great health risks to the local inhabitant through consumption of vegetables. Therefore, it is recommended that the discharge of industrial and municipal wastewater into water resources witch used for vegetable irrigation should be the first step in controlling the level of heavy metals in vegetables.

Spatio-seasonal variation, distribution, levels, and risk assessment of airborne asbestos concentration in the most industrial city of Iran: effect of meteorological factors

Like other dangerous pollutants in the air, asbestos has negative and adverse effects on human and animal health. The present study is designed to determine the concentration of asbestos in the air of the most industrial city of Iran (Karaj) in 2018-2019. For this purpose, 4 samples were taken from different areas of the air of Karaj during a year with an SKC pump and flow of 6 L/min for 8 h and in 45 days, and a total of 68 samples of asbestos fibers were collected. Then, the samples were analyzed by phase-contrast microscope (PCM) and scanning electron microscopy (SEM). Eventually, the health effects of asbestos fibers were evaluated by the IRIS EPA method. The average concentration of asbestos fibers was 1.84 f/L PCM and 18.16 f/L SEM. Also, the results of statistical correlation analysis indicated that asbestos fibers are positively correlated with wind speed but negatively correlated with the other three parameters (temperature, relative humidity, and pressure). On the other hand, the average annual risk of asbestos fiber in the ambient air of Karaj for all samples was in the range of 4.32 × 10^-6 to 1.81 × 10^-4 which in some places had more danger than the recommended risk range. According to the EPA guidelines, carcinogenicity acceptable levels are in the range of 10^-4 and 10^-6. Values higher than 10^-4 have more carcinogenic risk and values lower than 10^-6 have a lower carcinogenic risk.

Urinary level of un-metabolized parabens in women working in beauty salons

Parabens are a group of chemical additive extensively utilized in various health care products and ubiquitously observed in the different environmental matrixes. Nevertheless, the exposure of women working in beauty salons to these pollutants is not well-documented. For this purpose, 50.00 women working in beauty salons were chosen as the exposed group (EG) and 35.00 housewives were chosen as the control group (GC). The concentration of methyl paraben (MeP), ethyl paraben (EtP), butyl paraben (BuP), propyl paraben (PrP), benzyl paraben (BzP), heptyl paraben (HepP), and para-hydroxybenzoic acid (4-HB) metabolite were quantified in the collected urine samples. It was seen that paraben sexist with a high detection frequency (DF) in the urine of women working in beauty salons. The results also revealed that the significant difference between the urinary parabens level in the EG and CG (P value < 0.05). The median concentration of Σparaben and HB-4 metabolite in the before exposure (BE) samples was 124.00 and 219.00 μg/L, while in the after exposure (AE) samples, it was 156.00 and 249.00 μg/L, respectively. Moreover, the parabens levels in the AE samples were considerably higher than in BE samples in women working in beauty salons (P value < 0.05). This research also documented that "personal care products (PCPs) usage" can be known as a leading factor for the urinary paraben level in the studied individuals. The median total estimated daily intakes (TEsDI) for MeP, EtP, and PrP for the studied women were obtained as 8.02, 4.57, and 7.88 μg/L respectively. Also, a significant and positive association was observed between EtP, PrP as well as BuP and 8-OhdG (as a DNA oxidative stress biomarker) (P value < 0.01). Further, a significant and positive association was found between EtP as well as BuP and some biomarkers of kidney damage (like uTIMP-1 and uKim-1). Accordingly, it can be stated that women working in beauty salons are at a high risk in terms of DNA oxidative stress and kidney damage.