Emulsion electrospinning of sodium alginate/poly(ε-caprolactone) core/shell nanofibers for biomedical applications

Electrospun nanofibers have shown great potential as drug vehicles and tissue engineering scaffolds. However, the successful encapsulation of multiple hydrophilic/hydrophobic therapeutic compounds is still challenging. Herein, sodium alginate/poly(ε-caprolactone) core/shell nanofibers were fabricated via water-in-oil emulsion electrospinning. The sodium alginate concentration, water-to-oil ratio, and surfactant concentration were optimized for the maximum stability of the emulsion. The results demonstrated that an increasing water-to-oil ratio results in more deviation from Newtonian fluid and leads to a broader distribution of the fibers' diameters. Moreover, increasing poly(ε-caprolactone) concentration increases loss and storage moduli and increases the diameter of the resulting fibers. The nanofibers' characteristics were investigated by scanning electron microscopy, transmission electron microscopy, confocal laser scanning microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and water contact angle measurements. It was observed that using an emulsion composition of 10% (w/v) PCL and a water-to-oil ratio of 0.1 results in smooth, cylindrical, and uniform core/shell nanofibers with PCL in the shell and ALG in the core. The in vitro cell culture study demonstrated the favorable biocompatibility of nanofibers. Overall, this study provides a promising and trustworthy material for biomedical applications.

Improved performance of Bis-GMA dental composites reinforced with surface-modified PAN nanofibers

In the present work, polyacrylonitrile (PAN) nanofibers reinforced dental composites were investigated to achieve the improved interfacial adhesion between the PAN nanofiber and resin matrix using surface modification of nanofibers. PAN nanofibers mat were prepared by electrospinning and then, surface treated with the activated bisphenol A glycidyl methacrylate (Bis-GMA)/triethyleneglycol dimethacrylate (TEGDMA) (50/50 mass ratio) dental resin followed by photo-curing. Also, the treated nanofibers mat was milled into a powder to achieve the uniform distribution of nanofibers in the matrix resin. The reinforced dental composite were prepared by mixing the various mass fraction of the powder (0.5-15 wt%) with the Bis-GMA/TEGDMA dental monomers. The effect of weight ratio of surface-modified nanofibers to blend resin on the chemical structure, morphology, compression and flexural properties, color and polymerization shrinkage of dental composites was evaluated. The results showed that using surface-treated nanofibers with content of 5 wt% enhanced the compression strength, flexural strength, flexural modulus and work of rupture of the resultant dental composite by factors of 23%, 7%, 80%, and 145%, respectively, comparing to the unreinforced neat resin. Also, the polymerization shrinkage reduces by 37%. These significant improved properties of the dental composite could be due to the semi-interpenetration network formation between surface-modified nanofibers and resin matrix and well distribution of nanofibers in the dental resin. Further increasing the nanofiber content led to poor mechanical properties of obtained dental composites. The results also, revealed that the color of resin composite could be whiter using modified PAN nanofibers as the filler.

Phase formation of nanolaminated Mo2AuC and Mo2(Au1-xGax)2C by a substitutional reaction within Au-capped Mo2GaC and Mo2Ga2C thin films

Au-containing nanolaminated carbides Mo₂AuC and Mo₂(Au_1-xGa_x)₂C were synthesized by a thermally induced substitutional reaction in Mo₂GaC and Mo₂Ga₂C, respectively. The Au substitution of the Ga layers in the structures was observed using cross-sectional high-resolution scanning transmission electron microscopy. Expansion of c lattice parameters was also observed in the Au-containing phases compared to the original phases. Energy dispersive spectroscopy detected residual Ga in Au-substituted layers of both phases with a peculiar Ga in-plane ordering for Au : Ga = 9 : 1 ratio along the Au-Ga layers in Mo₂(Au_1-xGa_x)₂C. These results indicate a generalization of the Au substitution reaction for the A elements in MAX phases.

Synthesis of Ti3AuC2, Ti3Au2C2 and Ti3IrC2 by noble metal substitution reaction in Ti3SiC2 for high-temperature-stable Ohmic contacts to SiC

The large class of layered ceramics encompasses both van der Waals (vdW) and non-vdW solids. While intercalation of noble metals in vdW solids is known, formation of compounds by incorporation of noble-metal layers in non-vdW layered solids is largely unexplored. Here, we show formation of Ti₃AuC₂ and Ti₃Au₂C₂ phases with up to 31% lattice swelling by a substitutional solid-state reaction of Au into Ti₃SiC₂ single-crystal thin films with simultaneous out-diffusion of Si. Ti₃IrC₂ is subsequently produced by a substitution reaction of Ir for Au in Ti₃Au₂C₂. These phases form Ohmic electrical contacts to SiC and remain stable after 1,000 h of ageing at 600 °C in air. The present results, by combined analytical electron microscopy and ab initio calculations, open avenues for processing of noble-metal-containing layered ceramics that have not been synthesized from elemental sources, along with tunable properties such as stable electrical contacts for high-temperature power electronics or gas sensors.

Untapped potentials of acrylonitrile-butadiene-styrene/polyurethane (ABS/PU) blend membrane to purify dye wastewater

Production of acrylonitrile-butadiene-styrene/polyurethane (ABS/PU) blend membrane with high rejection efficiency for disperse and vat dyes, is introduced as a facile and cost effective technique to purify textile wastewater. In this respect, membranes are produced using commercially available polymers, i.e. ABS and PU, with different compositions (ABS/PU: 100/0, 80/20, 70/30, 60/40 and 50/50 w/w) through wet casting. Casting solutions with concentration of 30 wt% are prepared using two different solvents, i.e. dimethylformamide (DMF) and N-methyl-2- pyrrolidone (NMP). The prepared membranes are characterized using a variety of analytical techniques including SEM imaging, FTIR spectroscopy, dry and wet gas permeation, evaluation of reusability, antifouling and mechanical properties, photostability, surface hydrophilicity and pure water permeability (PWP) of the produced membranes. According to the results, irrespective of solvent type, ABS/PU membranes with higher PU content have lower porosity and smaller pore size both of which contribute to enhanced dye rejection efficiency. This is while the impact of PU content on the photostability of ABS/PU membranes was found to be negligible. Additionally, the produced ABS/PU membranes exhibit good reusability and antifouling properties. However, the mechanical properties of ABS/PU membranes with higher PU contents are inferior to those with lower PU contents. This contrast highlights the prominence of optimum PU content to make a trade-off between dye rejection efficiency and mechanical properties. In this regard, ABS/PU (60/40 w/w) membrane is recognized as the one with optimum composition. Furthermore, it was found that regardless of PU content, membranes cast from DMF-based solutions exhibit superior rejection performance over those cast from NMP-based solutions. Overall, one can witness that employing ABS/PU membranes provides a meritorious and clean approach to refine disperse and vat dye wastewaters, a great threat to the environment and human health.

Ti2Au2C and Ti3Au2C2 formed by solid state reaction of gold with Ti2AlC and Ti3AlC2

Ti₂Au₂C and Ti₃Au₂C₂ formation by Au/Ti₂AlC and Au/Ti₃AlC₂ exchange-reactions imply thermodynamic guidelines for identifying materials where these reactions may occur.

Highly effective CO2 capture using super-fine PVDF hollow fiber membranes with sub-layer large cavities

This work reports a noticeable advancement in CO₂ capture using gas–liquid membrane contactors (GLMC) composed of super-fine poly(vinylidene fluoride) hollow fiber membranes (PVDF HFMs) incorporated with sub-layer large cavities.

Enhanced ferroelectric properties of electrospun poly(vinylidene fluoride) nanofibers by adjusting processing parameters

This contribution investigates the ferroelectric properties and polymorphism evolution of poly(vinylidene fluoride) (PVDF) mats prepared through electrospinning solutions of PVDF in pure N,N-dimethylformamide (DMF) and DMF/acetone mixtures with different weight ratios.