Performance and economic evaluation of a pilot scale embedded ends-free membrane bioreactor (EEF-MBR)

In this work, an embedded ends-free membrane bioreactor (EEF-MBR) has been developed to overcome the fouling problem. The EEF-MBR unit has a novel configuration where a bed of granular activated carbon is placed in the bioreactor tank and fluidized by the aeration system. The performance of pilot-scale EEF-MBR was assessed based on flux and selectivity over 140 h. The permeate flux fluctuated between 2 and 10 L.m^-2.h^-1 under operating pressure of 0.07-0.2 bar when EEF-MBR was used to treat wastewater containing high organic matter. The COD removal efficiency was more than 99% after 1 h of operating time. Results from the pilot-scale performance were then used to design a large-scale EEF-MBR with 1200 m³.day^-1 capacity. Economic analysis showed that this new MBR configuration was cost-effective when the permeate flux was set at 10 L.m^-2.h^-1. The estimated additional cost for the large-scale wastewater treatment was about 0.25 US$.m^-3 with a payback period of 3 years. KEY POINTS: • Performance of new MBR configuration, EEF-MBR, was assessed in long term operation. • EEF-MBR shows high COD removal and relatively stable flux. • Cost estimation of large scale shows the cost effective EEF-MBR application.

Immobilization of glucose oxidase on chitosan-based porous composite membranes and their potential use in biosensors

The glucose oxidase (GOx) enzyme was immobilized on chitosan-based porous composite membranes using a covalent bond between GOx and the chitosan membrane. The chitosan-based porous membranes were prepared by the combination of the evaporation- and non-solvent-induced phase separation methods. To increase the membrane conductivity, carbon nanotubes (CNTs) were added to the chitosan solution. The resulting membranes were characterized in terms of water permeability, surface morphology and surface chemistry. Enzyme immobilization was performed on the chitosan membranes with and without activation using glutaraldehyde (GA). Three different configurations of working electrodes were evaluated to investigate the potential use of the modified membranes in biosensors. The results show that enzyme immobilization capacity was greater for membranes that had been activated than for membranes that had not been activated. In addition, activation increased the stability of the enzyme immobilization. The immobilization of GOx on chitosan-based membranes was influenced by both pH and the concentration of the enzyme solution. The presence of CNTs significantly increased the electrical conductivity of the chitosan membranes. The evaluation of three different configurations of working electrodes suggested that the third configuration, which was composed of an electrode-mediator-(chitosan and carbon nanotube) structure and enzyme, is the best candidate for biosensor applications.