Iron slag/activated carbon-electrokinetic system with anolyte recycling for single and mixture heavy metals remediation

The electrokinetic process has been proposed for in-situ soil remediation to minimize excavation work and exposure to hazardous materials. The precipitation of heavy metals in alkaline pH near the cathode is still challenging. Reactive filter media and enhancement agents have been used in electrokinetics to enhance the removal of heavy metals. This study investigated coupling industrial iron slag waste and iron slag-activated carbon reactive filter media with electrokinetic for a single and mixture of heavy metals treatment. Instead of using acid enhancement agents, the anolyte solution was recycled to neutralize the alkaline front at the cathode, reducing the operation cost and chemical use. Experiments were conducted for 2 and 3 weeks at 20 mA electric current. Copper removal increased from 3.11 % to 23 % when iron slag reactive filter media was coupled with electrokinetic. Copper removal increased to 70.14 % in the electrokinetic experiment with iron slag-activated carbon reactive filter media. The copper removal increased to 89.21 % when the anolyte solution was recycled to the cathode compartment. Copper removal reached 93.45 % when the reactive filter media-electrokinetic process with anolyte recirculation was extended to 3 weeks. The reactive filter media- an electrokinetic process with anolyte recycling was evaluated for removing copper, nickel, and zinc mixture, and results revealed 81.1 % copper removal, 89.04 % nickel removal, and 92.31 % zinc removal in a 3-week experiment. The greater nickel and zinc removal is attributed to their higher solubility than copper. The results demonstrated the cost-effectiveness and efficiency of the electrokinetic with iron slag-activated carbon reactive filter media with anolyte recirculation for soil remediation from heavy metals.

Stability of Viscoelastic Solutions: BrijL4 and Sodium Cholate Mixtures with Metal Ions Across a Broad pH and Temperature Range

The impact of pH, temperature, and metal ions on the rheological and interfacial properties of aqueous mixed surfactant solutions composed of anionic NaC (sodium cholate) and nonionic BrijL4 [polyoxyethylene (4) lauryl ether] surfactants has been investigated. The various compound systems were analyzed, considering variations in each selected factor. The results highlight the unique characteristics of the BrijL4/NaC mixture, suggesting its potential as a viable alternative to other existing surfactants. The synergistic effect between BrijL4 and NaC significantly reduces the critical micelle concentration (CMC) and improves the wetting properties on hydrophobic surfaces, surpassing those of single-component solutions. Additionally, sodium, calcium, and magnesium ions enhance surface wetting and decrease the CMC. Besides, the BrijL4/NaC solutions exhibit viscoelastic fluid behavior at higher surfactant concentrations. These viscoelastic BrijL4/NaC solutions demonstrate stability over various pH and temperature variations, exhibiting lower flow activation and scission energy values than those of other viscoelastic surfactant solutions. Notably, the BrijL4/NaC mixture has potential applications in gel-based foliar fertilizers and drug delivery systems. Furthermore, the rheological studies examine the impact of humic acid on the rheological properties of BrijL4/NaC mixture solutions, revealing that incorporating additional humic acids can achieve stable rheological properties.

Iron slag permeable reactive barrier for PFOA removal by the electrokinetic process

The efficacy of the Standalone Electrokinetic (EK) process in soil PFAS removal is negligible, primarily due to the intersecting mechanisms of electromigration and electroosmosis transportation. Consequently, the redistribution of PFAS across the soil matrix occurs, hampering effective remediation efforts. Permeable reactive barrier (PRB) has been used to capture contaminants and extract them at the end of the EK process. This study conducted laboratory-scale tests to evaluate the feasibility of the iron slag PRB enhanced-EK process in conjunction with Sodium Cholate (NaC) biosurfactant as a cost-effective and sustainable method for removing PFOA from the soil. A 2 cm iron slag-based PRB with a pH of 9.5, obtained from the steel-making industry, was strategically embedded in the middle of the EK reactors to capture PFOA within the soil. The main component of the slag, iron oxide, exhibited significant adsorption capacity for PFOA contamination. The laboratory-scale tests were conducted over two weeks, revealing a PFOA removal rate of more than 79% in the slag/activated carbon PRB-EK test with NaC enhancement and 70% PFOA removal in the slag/activated carbon PRB-EK without NaC. By extending the duration of the slag/AC PRB-EK test with NaC enhancement to three weeks, the PFOA removal rate increased to 94.09%, with the slag/AC PRB capturing over 87% of the initial PFOA concentration of 10 mg/L. The specific energy required for soil decontamination by the EK process was determined to be 0.15 kWh/kg. The outcomes of this study confirm the feasibility of utilizing iron slag waste in the EK process to capture PFOA contaminants, offering a sustainable approach to soil decontamination. Combining iron slag PRB and NaC biosurfactant provides a cost-effective and environmentally friendly method for efficient PFOA removal from soil.

Desalination by the forward osmosis: Advancement and challenges

Forward osmosis (FO) has become a promising membrane technology for desalination and water treatment due to its simplicity, low energy consumption, and low fouling tendency compared to pressure-driven membrane processes. Therefore, the advancement in FO process modelling was one of the main objectives of this paper. On the other hand, the membrane characteristics and draw solute type represent the main FO process factors determining its technical performance and economical perspectives. Thus, this review mainly highlights the commercially available FO membrane characteristics and the development of lab-scale fabricated membranes based on cellulose triacetate and thin-film nanocomposite membranes. These membranes were discussed by considering their fabrication and modification techniques. Additionally, the novelty of different draw agents and their effects on FO performance have been analyzed in this study. Moreover, the review touched upon different pilot-scale studies on the FO process. Finally, this paper has stated the overall FO process advances along with its drawbacks. This review is anticipated to benefit the research and desalination scientific community by having an overview of the major FO components that require additional attention and development.

Novel Approach to Landfill Wastewater Treatment Fouling Mitigation: Air Gap Membrane Distillation with Tin Sulfide-Coated PTFE Membrane

This study addressed the fouling issue in membrane distillation (M.D.) technology, a promising method for water purification and wastewater reclamation. To enhance the anti-fouling properties of the M.D. membrane, a tin sulfide (TS) coating onto polytetrafluoroethylene (PTFE) was proposed and evaluated with air gap membrane distillation (AGMD) using landfill leachate wastewater at high recovery rates (80% and 90%). The presence of TS on the membrane surface was confirmed using various techniques, such as Field Emission Scanning Electron Microscopy (FE-SEM), Fourier Transform Infrared Spectroscopy (FT-IR), Energy Dispersive Spectroscopy (EDS), contact angle measurement, and porosity analysis. The results indicated the TS-PTFE membrane exhibited better anti-fouling properties than the pristine PTFE membrane, and its fouling factors (FFs) were 10.4-13.1% compared to 14.4-16.5% for the PTFE membrane. The fouling was attributed to pore blockage and cake formation of carbonous and nitrogenous compounds. The study also found that physical cleaning with deionized (DI) water effectively restored the water flux, with more than 97% recovered for the TS-PTFE membrane. Additionally, the TS-PTFE membrane showed better water flux and product quality at 55 °C and excellent stability in maintaining the contact angle over time compared to the PTFE membrane.

Sodium docusate as a cleaning agent for forward osmosis membranes fouled by landfill leachate wastewater

Membrane cleaning is critical for economic and scientific reasons in wastewater treatment systems. Sodium docusate is a laxative agent and removes cerumen (ear wax). Docusate penetrates the hard ear wax, making it softer and easier to remove. The same concept could be applied to soften and remove fouling layers on the membrane surface. Once softened, the foulants can be easily flushed with water. This innovative approach can address the challenge of developing superior methods to mitigate membrane fouling and material degradation. In this study, we evaluated the efficiency of sodium docusate for cleaning fouled forward osmosis membranes with real landfill leachate wastewater. Experiments were conducted to examine the impact of dose rate, contact time, flow or static conditions, and process configuration (forward osmosis (FO) or pressure retarded osmosis (PRO) upon fouling created by landfill leachate dewatering. A remarkable (99%) flux recovery was achieved using docusate at a small concentration of only 0.1% for 30 min. Furthermore, docusate can also effectively restore flux with static cleaning without using pumps to circulate the cleaning solution. Furthermore, cleaning efficiency can be achieved at neutral pH compatible with most membrane materials. From an economic and energy-saving perspective, static cleaning can almost achieve the same cleaning efficiency as kinetic cleaning for fouled forward osmosis membranes without the expense of additional pumping energy compared to kinetic cleaning. Since pumping energy is a major contributor to the overall energy of the forward osmosis system, it can be minimized to a certain degree by using a static cleaning approach and can bring good energy savings when using larger membrane areas. Studies of the contact angle on the membrane surface indicated that the contact angle was decreased compared to the fouled membrane after cleaning (e.g. 70.3° to 63.2° or FO mode and static cleaning). Scanning Electron Microscopy revealed that the cleaning strategy was successful. Infrared Spectroscopy showed that a small amount of sodium docusate remained on the membrane surface. Docusate is more environmentally friendly than acid or alkaline solutions from an environmental perspective. Furthermore, the cleaning solution can be reused for several cycles without discarding it due to the surfactant properties of docusate.

Feasibility of Poly (Vinyl Alcohol)/Poly (Diallyldimethylammonium Chloride) Polymeric Network Hydrogel as Draw Solute for Forward Osmosis Process

Forward osmosis (FO) has been identified as an emerging technology for the concentration and crystallization of aqueous solutions at low temperatures. However, the application of the FO process has been limited due to the unavailability of a suitable draw solute. An ideal draw solute should be able to generate high osmotic pressure and must be easily regenerated with less reverse solute flux (RSF). Recently, hydrogels have attracted attention as a draw solution due to their high capacity to absorb water and low RSF. This study explores a poly (vinyl alcohol)/poly (diallyldimethylammonium chloride) (PVA-polyDADMAC) polymeric network hydrogel as a draw solute in forward osmosis. A low-pressure reverse osmosis (RO) membrane was used in the FO process to study the performance of the hydrogel prepared in this study as a draw solution. The robust and straightforward gel synthesis method provides an extensive-scale application. The results indicate that incorporating cationic polyelectrolyte poly (diallyldimethylammonium chloride) into the polymeric network increases swelling capacity and osmotic pressure, thereby resulting in an average water flux of the PVA-polyDADMAC hydrogel (0.97 L m−2 h−1) that was 7.47 times higher than the PVA hydrogel during a 6 h FO process against a 5000 mg L−1 NaCl solution (as a feed solution). The effect of polymer and cross-linker composition on swelling capacity was studied to optimize the synthesized hydrogel composition. At 50 °C, the hydrogel releases nearly >70% of the water absorbed during the FO process at room temperatures, and water flux can be recovered by up to 86.6% of the initial flux after 12 hydrogel (draw solute) regenerations. Furthermore, this study suggests that incorporating cationic polyelectrolytes into the polymeric network enhances FO performances and lowers the actual energy requirements for (draw solute) regeneration. This study represents a significant step toward the commercial implementation of a hydrogel-driven FO system for the concentration of liquid-food extract.

Fouling and Performance Investigation of Membrane Distillation at Elevated Recoveries for Seawater Desalination and Wastewater Reclamation

This study reports on the impact of elevated recovery (i.e., 80%, 85%, and 90%) on the fouling and performance of air gap membrane distillation (AGMD) with real seawater and landfill leachate wastewater samples using polytetrafluoroethylene (PTFE) polymer membranes. Increasing the feed temperature from 55 °C to 65 °C improved the water flux of seawater and wastewater and shortened the operating time by 42.8% for all recoveries. The average water flux in the 80%, 85%, and 90% recovery experiments at the 65 °C feed temperature was 32%, 37.32%, and 36.7% higher than the case of 55 °C for the same recoveries. The water flux decline was more severe at a higher temperature and recovery. The highest flux decline was observed with a 90% recovery at 65 °C feed temperature, followed by an 85% recovery at 65 °C. Close examination of the foulants layer revealed that seawater formed a cake fouling layer made predominantly of metal oxides. In contrast, the landfill leachate fouling was a combination of pore blocking and cake formation, consisting mainly of carbonous and nitrogenous compounds. Physical cleaning with deionized (DI) water at 55 °C and 65 °C and chemical cleaning with hydrogen peroxide (H2O2) were investigated for their efficiency in removing membrane foulants. Analytical results revealed that seawater fouling caused membrane pore blockage while wastewater fouling formed a porous layer on the membrane surface. The results showed that membrane cleaning with hydrogen peroxide restored >97% of the water flux. Interestingly, the fouling factor in seawater tests was 10%, while it was 16% for the wastewater tests.

Preparation of fouling resistant and highly perm-selective novel PSf/GO-vanillin nanofiltration membrane for efficient water purification

To meet the rising global demand for water, it is necessary to develop membranes capable of efficiently purifying contaminated water sources. Herein, we report a series of novel polysulfone (PSf)/GO-vanillin nanofiltration membranes highly permeable, selective, and fouling resistant. The membranes are composed of two-dimensional (2D) graphite oxide (GO) layers embedded with vanillin as porogen and PSf as the base polymer. There is a growing interest in addressing the synergistic effect of GO and vanillin on improving the permeability and antifouling characteristics of membranes. Various spectroscopic and microscopic techniques were used to perform detailed physicochemical and morphological analyses. The optimized PSf₁₆/GO_0.15-vanillin_0.8 membrane demonstrated 92.5% and 25.4% rejection rate for 2000 ppm magnesium sulphate (MgSO₄) and sodium chloride (NaCl) solutions respectively. Antifouling results showed over 99% rejection for BSA and 93.57% flux recovery ratio (FRR). Experimental work evaluated the antifouling characteristics of prepared membranes to treat landfill leachate wastewater. The results showed 84-90% rejection for magnesium (Mg⁺²) and calcium (Ca⁺²) with 90.32 FRR. The study experimentally demonstrated that adding GO and vanillin to the polymeric matrix significantly improves fouling resistance and membrane performance. Future research will focus on molecular sieving for industrial separations and other niche applications using mixed matrix membranes.

Feasibility of H2O2 cleaning for forward osmosis membrane treating landfill leachate

This study reports landfill leachate treatment by the forward osmosis (FO) process using hydrogen peroxide (H₂O₂) for membrane cleaning. Although chemical cleaning is an effective method for fouling control, it could compromise membrane integrity. Thus, understanding the impact of chemical cleaning on the forward osmosis membrane is essential to improving the membrane performance and lifespan. Preliminary results revealed a flux recovery of 98% in the AL-FS mode (active layer facing feed solution) and 90% in the AL-DS (draw solution faces active layer) using 30% H₂O₂ solution diluted to 3% by pure water. The experimental work investigated the effects of chemical cleaning on the polyamide active and polysulfone support layers since the FO membrane could operate in both orientations. Results revealed that polysulfone support layer was more sensitive to H₂O₂ damage than the polyamide active at a neutral pH. The extended exposure of thin-film composite (TFC) FO membrane to H₂O₂ was investigated, and the active layer tolerated H₂O₂ for 72 h, and the support layer for only 40 h. Extended operation of the TFC FO membrane in the AL-FS based on a combination of physical (hydraulic flushing with DI water) and H₂O₂ was reported, and chemical cleaning with H₂O₂ could still recover 92% of the flux.

Feasibility of brackish water and landfill leachate treatment by GO/MoS2-PVA composite membranes

Two-dimensional (2D) based layered materials with tunable chemical functionalities and surface charge properties have emerged for on-demand applications including membrane technology. However, the process control, time and energy-efficient production of non-swelling graphene oxide (GO) with retaining physicochemical properties are still challenging. In this work, we have fabricated highly ordered GO membrane on cellulose acetate supporting membrane filters of 1.2 μm pore size using molybdenum disulphide (MoS₂) as a nano-spacer and polyvinyl alcohol (PVA) as an adhesive for the first time with limited swelling. The fabricated membranes were used for NaCl rejection and removal of toxic heavy metal ions, and the radioactive element from landfill leachate water. The introduction of hydrophilic PVA, thickness control using a various amount of nanospacer and graphene oxide played a vital role in the transport mechanism, permeability, and selectivity index. The composition of PVA and MoS₂ in the coating solution was optimized to tune the d-spacing of graphene oxide layers. The newly developed composite membranes have 89% rejection rate to NaCl and 3.96 L/m²h water flux at low operating pressures of 5 bar. Also, the prepared membranes have a high rejection of multivalent metal ions in landfill leachate. 86.5% to 99.8% rejection rate of multivalent metal ions in landfill leachate was observed for the M₃ (GO ₍₁₀₎: MoS_{2 (10)}: PVA _(0.5)) membrane. The excellent rejection performance is ascribed to the combined impact of size exclusion, ion adsorption, electrostatic interaction and Gibbs-Donnan exclusion mechanism. The excellent stability and high rejection rate even after 216 h of operation make the fabricated membranes promising for use in practical water separation applications.

Treatment of biologically treated landfill leachate with forward osmosis: Investigating membrane performance and cleaning protocols

This study presents systematic investigations to evaluate the performance, rejection rate, fouling, cleaning protocols and impact of physical and chemical cleaning strategies on the performance of commercial cellulose triacetate (CTA) membrane. The treatment of landfill leachate (LFL) solution was performed in the active layer facing feed solution and support layer facing the draw solution (AL-FS mode), and active layer facing the draw solution and support layer facing the feed solution (AL-DS mode). Compared to the AL-FS mode, a higher flux for AL-DS mode was achieved, but membrane fouling was more severe in the latter. In both membrane orientations, the rejection rate of the FO membrane to heavy ions and contaminants in the wastewater was between 93 and 99%. Physical and chemical cleaning strategies were investigated to recover the performance of the FO membrane and to study the impact of cleaning methods on the membrane rejection rate. Physical cleaning with hot water at 35 °C and osmotic backwashing with 1.5 M NaCl demonstrated excellent water flux recovery compared to chemical cleaning. In the chemical cleaning, an optimal concentration of 3% hydrogen peroxide was determined for 100% flux recovery of the fouled membrane. However, slight membrane damage was achieved at this concentration on the active layer side. Alkaline cleaning at pH 11 was more effective than acid cleaning at pH 4, although both protocols compromised the membrane rejection rate for some toxic ions. A comparison of the membrane long-term performance found that cleaning with osmotic backwashing and hot water were effective methods to restore water flux without comprising the membrane rejection rate. Overall, it was found that physical cleaning protocols are superior to chemical cleaning protocols for forward osmosis membrane fouled by landfill leachate wastewater.

ANALYTIC HIERARCHY PROCESS MODEL FOR THE SELECTION OF OPTIMAL INTERNET ACCESS TECHNOLOGIES IN RURAL PAKISTAN

Information and telecommunication technologies are considered significant for the economic and social development of isolated and remote areas. Internet technologies create links between urban and rural areas that can overcome the barrier of distance that typically hinders development. In rural areas of Pakistan, Internet penetration is low due to high cost, lack of manageable infrastructure, public issues and many other factors that disturb sustainable Internet provision; however, the choice of access to technology in rural areas is a complex process. In this paper, we used the Analytic Hierarchy Process (AHP) method, which is a powerful multi-criteria decision-making (MCDM) approach and is a structured procedure for organizing and analyzing complex decisions. Furthermore, we proposed an AHP model for the selection of an ideal Internet access technology, which would facilitate access to Internet services to the 61% of the population who live in Pakistan’s rural areas. Data were collected from 38 respondents, from both academia and the telecom sector IT professionals. The relative weights of each factor and technology alternative were synthesized with Expert Choice 2000. This paper can provide comprehensive recommendations to telecommunication policymakers for Internet deployment and the selection of optimal Internet access technology in rural Pakistan.