Antibacterial Activity Assessment of Chitosan/Alginate Lavender Essential Oil Membranes for Biomedical Applications

The demand for natural products in the treatment of dermatological pathologies has boosted the use of bioactive substances such as lavender essential oil (LEO), which stands out for its anti-inflammatory and antioxidant properties and its antimicrobial potential. Biopolymers such as chitosan (CHT) and alginate (ALG) are biodegradable and biocompatible and have proven their viability in biomedical applications such as skin regeneration. The inhibitory effect of LEO on the growth of skin-related bacterial species Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa and the fungus Candida albicans was studied by incorporating 1% v/v LEO encapsulated in CHT, ALG, and CHT/ALG membranes. Despite the verification of the antimicrobial effect of all type of membranes, no synergistic effect was observed following the addition of LEO. S. aureus and P. aeruginosa showed the most growth on the different substrates and C. albicans demonstrated the highest inhibition. This is a first approach using microorganisms isolated from clinical samples or skin microbiota. Further investigation would be advisable using more clinical strains for each microorganism to validate their biomedical applicability.

Garlic Extracts: Effect of pH on Inhibition of Helicobacter pylori

The present work studies the influence of pH on the stability of thiosulfinates, compounds responsible for the bacteriostatic properties shown by ethanolic and acetonic garlic extracts (EGE and AGE) against the in vitro growth of Helicobacter pylori (Hp), a bacterium which is implicated in the etiology of diverse gastrointestinal diseases. The influence of pH and time on the stability of thiosulfinates and the microbiological activities of EGE and AGE has been evaluated at human body temperature (37 °C) and in a pH range of 0.9-4.7. A marked decrease in thiosulfinate concentration was observed in a relatively short time at pH values below 2.0. However, at pH values over 2.0, the samples maintained 70% of thiosulfinate concentration for 12 h. The inhibition halo diameters showed a maximum value at pH 2.50, with an inhibition halo of 28.94 ± 0.61 mm. The reduction in the activity at pH values below 2.0 was particularly remarkable. These results suggest that, for medical application, the pH of the selected extracts must only be maintained above 2 to maintain a high level of antibacterial activity. This fact would overcome the need for proton pump inhibitors and/or antibiotics during the treatment of Hp infections in human patients.

Alginate-Chitosan Membranes for the Encapsulation of Lavender Essential Oil and Development of Biomedical Applications Related to Wound Healing

Biopolymers such as chitosan (CHT) or alginate (ALG) are among the most prominent for health-related applications due to their broad bioactivity. Their combination for the preparation of membranes is hereby proposed as an application for wound healing with the incorporation of lavender essential oil (LEO), widely known for its antioxidant and antimicrobial properties. The preparation of CHT, CHT + LEO, ALG, ALG + LEO, and CHT/ALG + LEO membranes was accomplished, and its composition was analyzed using Fourier Transform Infrared Spectroscopy (FTIR). The water absorption capacity and oil release profile of the membranes revealed higher water uptake capacity when a lower LEO release was obtained. The combined CHT/ALG + LEO film showed a water uptake percentage of 638% after 48 h and a maximum LEO release concentration of 42 mg/L. Cytotoxicity and biocompatibility of the prepared membranes were studied using a HaCaT cell line, with an assessment of cell viability regarding film leachables, DNA quantification, and DAPI-phalloidin staining. The results revealed that the indirect contact of the prepared membranes via its leachables does not compromise cell viability, and upon direct contact, cells do not adhere or proliferate on the surface of the membranes. Moreover, the CHT/ALG + LEO membrane increases cell proliferation, making it suitable for applications in wound healing.

Dataset of working mPEG-alkyne with scCO2

This article contains data related to the research article entitled “Carbon dioxide sorption and melting behavior of mPEG-alkyne”. The presented data gives information on the thermodynamics properties of the solvent and the polymer. The time saturation of mPEG-alkyne in supercritical carbon dioxide (scCO₂) was evaluated in a high-pressure variable volume cell in different period of time at different pressure at the same temperature.

The effects of pressure and temperature on the density of CO₂ when it is above supercritical conditions are determined with Sanchez Lacombe and Bender Equation and compared with the NIST database and values of equation of Bender. The characteristic parameters of CO₂ were determined with the equations proposed by Chengyong Wang et al. [1] and the sum of squared error was calculated for each parameter.

Furthermore in this work the solubility data of scCO₂/polymer mixture were correlated with Sanchez Lacombe Equation of State (SL EOS) and Heuristic model proposed by Irene Pasquali et al. [2]. This work describes the methodology for solving the SL EOS between the polymer and scCO₂ and the procedure of determining the solubility parameter with the group contribution method necessary to apply the heuristic model is described.

Synthesis and Operating Optimization of the PEG Conjugate via CuAAC in scCO2

A new sustainable green protocol for obtaining polyethylene glycol (PEG) conjugates, with a prototype molecule, which in this work was coumarin, by means of click chemistry is presented. The organic solvents commonly used for this type of reaction were replaced by supercritical carbon dioxide (scCO₂). The synthesis and characterization of PEG-coumarin were successfully reported using FTIR, ¹H NMR, and MALDI TOF. Subsequently, a preliminary study was carried out using the response surface methodology to examine the variables that most affect the use of scCO₂ as a reaction medium. The main effects caused by these variables, individually and their binary interaction, have been estimated. The response surface methodology has been used in this work to screen variables using a factorial design 2³. The p-values of temperature and pressure were 0.006 and 0.0117, being therefore the most significant variables of the response surface methodology study. Subsequently, a more intensive study has been carried out on the variables that have shown the greatest significant effect on reaction performance where an 82.32% synthesis success was achieved, which broadens the scope of the use of scCO₂ as a reaction medium. The conjugated coumarin with mPEG-alkyne and coumarin were evaluated for their in vitro antioxidant activities by the DPPH radical scavenging assay and were found to exhibit substantial activities. The click product showed comparable or even better efficacy than the initial coumarin.

Impregnation of Curcumin into a Biodegradable (Poly-lactic-co-glycolic acid, PLGA) Support, to Transfer Its Well Known In Vitro Effect to an In Vivo Prostate Cancer Model

Prostate cancer (PCa) is one of the most common cancers in older men and is associated with high mortality. Despite advances in screening for early detection of PCa, a large proportion of patients continue to be diagnosed with metastatic disease, with ~20% of men showing a high tumor grade and stage. Medicinal plant extracts have a great potential to prevent/treat PCa, as well as to reduce its incidence/prevalence and improve survival rates. One of the most promising extracts is curcumin, which is a major, nontoxic, bioactive compound of Curcuma longa. Curcumin has strong antitumor activity in vitro. However, its potential beneficial in vivo affects are limited by its low intestinal absorption and rapid metabolism. In this study, curcumin was impregnated into a biodegradable poly(lactic-co-glycolic) acid (PLGA) support and characterized by FTIR and DSC, and its release by UV spectrophotometry. PLGA-curcumin was tested in different subcutaneous PCa xenograft models (PC3, 22rv1, and DU145 PCa cell-lines), and its effects evaluated by tumor progression an immuno-histochemical analysis (Trichromic, Ki67 and TUNEL stainings), were compared with those of a commercial curcumin preparation. Our results indicate that curcumin-impregnated PLGA is significantly more active (~2-fold increase) with respect to oral curcumin, which supports its use for subcutaneous administration.

Functional organogelators formed by liquid-crystal carbazole-containing bis-MPA dendrimers

Functional organogels based on carbazole-containing liquid crystal block codendrimers that show an increased fluorescence emission and redox properties.

[Elastofibroma dorsi: a 7-year follow-up of 37 cases and a review of the literature]

BACKGROUND

Elastofibroma dorsi (ED) is an infrequent benign, slow growing, soft tissue tumour that is usually located in the scapular zone.

MATERIAL AND METHODS

A series of 37 ED patients diagnosed and treated in our hospital between August 1993 and November 2009 were retrospectively reviewed. The average follow up was 7 years. Ten of them presented bilaterally. The male/female ratio was 4:3, and the mean age was 57 years. An MRI was performed, and the diagnosis confirmed by histopathology. Seven cases were treated conservatively. The clinical results were evaluated using a visual analogue score (VAS) for pain and a comparison of the range of movement during follow up.

RESULTS

Some 18% of the patients worked or practiced sports that called for the use of the affected limb. The 40% of the patients required a post-operative transfusion was required by 40% of the patients, due to having a haemoglobin <8 g/d. The VAS improved from 6 to 2 after the surgery. The range of movement improved on an average of 40. The complications included an infection, 1 hyperalgesic scar, 8 haematomas and 3 seromas, which were resolved in the follow up without incidence. All the patients were free of illness after a mean follow-up of 85 months.

CONCLUSIONS

Good results were achieved with a long follow-up. Based on these results and a literature review of the current state of this pathology, an algorithm for its diagnosis and treatment is suggested.

Study of the solubility and stability of polystyrene wastes in a dissolution recycling process

Dissolution with suitable solvents is one of the cheapest and more efficient processes for polystyrene waste management. In this work the solubility of polystyrene foams in several solvents benzene, toluene, xylene, tetrahydrofuran, chloroform, 1,3-butanediol, 2-butanol, linalool, geraniol, d-limonene, p-cymene, terpinene, phellandrene, terpineol, menthol, eucalyptol, cinnamaldheyde, nitrobenzene, N,N-dimethylformamide and water has been determined. Experimental results have shown that to develop a "green process" the constituents of essential oils, d-limonene, p-cymene, terpinene, phellandrene, are the most appropriate solvents. The action of these solvent does not produce any degradation of polymer chains. The solubility of the polymer in the mentioned solvents at different temperatures has been investigated. The solvent can be easily recycled by distillation.

Copolymerization ofD,L-lactide and glycolide in supercritical carbon dioxide with zinc octoate as catalyst

The objective of the study is the development of a new technique based on supercritical technology for the production of bioabsorbable polymeric microparticles containing pharmaceutical principles, for their use in the controlled release of medicines. For this purpose, the ring-opening copolymerization of D,L-lactide and glycolide in supercritical carbon dioxide, using zinc(II) 2-ethylhexanoate (ZnOct2) as catalyst, was studied. The polymer obtained with ZnOct2 has similar characteristics to that obtained with stannous octoate (SnOct2), the conventional catalyst used up to now for this kind of polymerization process. Experiments were performed at various reaction times, pressures, and stirring rates. The most outstanding result was found by varying the stirring rate, where particles forming agglomerates seem to be obtained at the greater agitation levels.

Study of fractionation and potential mobility of metal from the Guadalquivir estuary: changes in mobility with time and influence of the aznalcollar mining spill

This study analyzed the evolution of metal levels in surface sediments from the Guadalquivir estuary between 1997 and 2002 and assessed the impact of the April 1998 Aznalcollar tailings dam failure and subsequent cleanup on metal concentrations in surface sediments. We also analyzed metal distribution with time in five chemical fractions of the surface sediments: exchangable, carbonate, reducible, oxidizable, and residual. This work showed that the April 1998 Aznalcollar tailings dam failure caused a considerable increase in the concentrations of Cd, Zn, Cu, and Pb in the surface sediments of the Guadalquivir estuary. It was also found there was a change in the distribution of Cd, Zn, Cu, and Pb between the chemical fractions of the sediment after the failure of the dam. There were increases in the percentages of Cd in the carbonate fraction, of Zn and Pb in the reducible fraction, and of Cu in the oxidizable fraction, whereas the percentages of these elements associated with the residual fraction decreased. In 1999, there was a decrease in the metal concentrations in the surface sediments from the Guadalquivir estuary, and by 2000 the chemical distribution and metal levels had returned to levels similar those before the dam failure.

Heavy metal concentrations in molluscs from the Atlantic coast of southern Spain

Trace metals were determined in the two most abundant species of bivalve molluscs along the Atlantic coast of southern Spain (Donax trunculus and Chamelea gallina) and in the sediments where they live. The results show that the area near the mouth of the Huelva estuary is where the highest metal concentrations are found in sediments and in the two bivalve species. This is not surprising, considering that the Huelva estuary is the mouth of the Tinto and Odiel rivers, which have one of the highest levels of metal pollution of all the rivers of Europe. The two species of bivalves have different amounts of metals in their tissues. The concentrations of Cr, Cu, Pb, Zn, As and Hg in D. trunculus were significantly higher (p < 0.05) than in C. gallina; however, C. gallina contained more Ni and Cd. In both species the most abundant elements were Cu and Zn, while Hg showed the lowest values. There is a significant correlation (p < 0.05) for concentrations of Cu, Pb, Zn and Hg in D. trunculus and C. gallina relative to their concentrations in surface sediments.

Biomonitoring of trace metals in a mine-polluted estuarine system (Spain)

In this paper, we examine metal concentrations in the water and in the crustacean Balanus balanoides from the Huelva estuary, one of the most polluted estuaries in Europe. Metal levels in waters are very high, especially those of Zn, Fe and Cu. Zn presents the highest concentrations, with a mean value of 690 microg l-1 in 2001 and 301 microg l-1 in 2002. As the water flows down through the estuary toward the sea, the metal concentrations drop sharply and the pH rises. The metal concentrations in balanoides tissues are, in general, very high, undoubtedly due to the high metal pollution of the water where it lives. Metal concentrations in Balanus balanoides tissues behave similarly to those in the water, reaching maximums in the upper part of the estuary and diminishing as we approach the sea. The element that reaches the highest levels in Balanus balanoides is Zn, with a mean value of 54.6 g kg-1 in 2001 and 29.9 g kg-1 in 2002, followed by Cu and Fe. There is a significant correlation (p<0.01) for concentrations of Cd, Cu, Fe, Mn, Ni and Zn in Balanus balanoides relative to their concentration in waters. Barnacles showed a great capacity to accumulate metals, especially Zn, Cu and Fe. Based on the results obtained, we can conclude that Balanus balanoides is a good tool for monitoring trace metals in the Huelva estuary.

Allyl-thiosulfinates, the bacteriostatic compounds of garlic against Helicobacter pylori

Allicin and allyl-methyl plus methyl-allyl thiosulfinate from acetonic garlic extracts (AGE) have been isolated by high-performance liquid chromatography. These compounds have shown inhibition of the in vitro growth of Helicobacter pylori (Hp), the bacterium responsible for serious gastric diseases such as ulcers and even gastric cancer. A chromatographic method was optimized and used to isolate these thiosulfinates. The method developed has allowed the isolation of natural thiosulfinates extracted from garlic by organic solvents and is an easy and cheap methodology that avoids complex synthesis and purification procedures. The capacity and effectiveness of isolated natural thiosulfinates have been tested, and this has enabled the identification of the main compounds responsible for the bacteriostatic activity shown by AGE origin of these kinds of organosulfur compounds along with ethanolic garlic extracts (EGE). Additionally, microbiological analyses have suggested that these compounds show a synergic effect on the inhibition of the in vitro growth of Hp. The results described here facilitate the process of obtaining garlic extracts with optimal bacteriostatic properties. The product is obtained in a way that avoids expensive purification methods and will allow the design of live tests with the aim of investigating the potential for the use of these garlic derivatives in the treatment of patients with Hp infections.

Thermal degradation of allicin in garlic extracts and its implication on the inhibition of the in-vitro growth of Helicobacter pylori

Allicin, the main active principle related to Allium sativum chemistry, is considered to be responsible for the bacteriostatic properties of garlic. The work described here has demonstrated the direct implication of the allicin present in solvent-free garlic extracts obtained with ethanol (ethanolic garlic extract, EGE) and acetone (acetonic garlic extract, AGE) in the inhibition of the in-vitro growth of Helicobacter pylori (Hp), the bacterium responsible for serious gastric diseases such as ulcers and even gastric cancer. The evolution of allicin concentration as a function of time and temperature has been the subject of a kinetic study. The reaction order, activation energy, and preexponential factor (in accordance with Arrhenius theory) have been determined for the decomposition process of allicin in these organic media. First-order decomposition, an activation energy of 97.4 kJ/mol, and an Arrhenius preexponential factor of 8.9 x 10(10) s(-1) have been determined for allicin in EGE. For allicin in AGE the kinetic order determined was 1.5, the activation energy 184.5 kJ/mol, and the preexponential factor 3.1 x 10(24) s(-1) (mg/L)(-0.5). The presence or absence of allicin in these garlic products was found to be crucial for the inhibition of the in-vitro growth of Hp, as demonstrated by microbiological analysis for AGE. A relationship has been identified between the effectiveness and durability of the anti-Hp properties shown by AGE and the allicin content of these products. The bacteriostatic properties were active for up to 10 months if the samples were maintained at 6 degrees C.

Heavy metal distribution in marine sediments from the southwest coast of Spain

The latest version (1999) of the BCR-sequential extraction technique was used to determine the distribution of metals (Cu, Zn, Cd, Pb, Fe, Ni, Cr, and Mn) with major sedimentary phases (acid-soluble, reducible, oxidisable and residual) in samples from the southwest coast of Spain. The total metal content was also determined. The results showed that an extensive area along the coast (35 km long), near the joint mouth of the Tinto and Odiel Rivers, contains sediments with high concentrations of metals, with maximums of 649 mg/kg of Zn, 336 mg/kg of Cu, 197 mg/kg of Pb and 2.5 mg/kg of Cd. The values found for Cr, Ni and Mn are comparable to those in unpolluted areas. Based on the chemical distribution of metals, we found that Zn is the most mobile (i.e., it can pass easily into the water under changing environmental conditions). This metal showed the highest percentages in the acid-soluble fraction (the most labile), especially in the central coastal area, where the samples contained over 50% of this element associated with this fraction. This area close to the Tinto and Odiel river mouths also shows a significant increase in the mobility of Cd and Cu. In both cases the amount present in the residual fraction is lower, and the acid-soluble fraction is increased for Cd and the oxidisable fraction for Cu. However, the highest percentages of Fe, Cr and Ni are found in the residual fraction (84%, 89% and 75%, respectively), which implies that these metals are strongly bound to the sediments.