Impact of SWMM Fouling and Position on the Performance of SWRO Systems in Operating Conditions of Minimum SEC

Due to water stress in the world in general desalination technologies are becoming increasingly important. Among the available technologies, reverse osmosis (RO) is the most widespread due to its reliability and efficiency compared to other technologies. The main weakness of RO is the loss of performance due to membrane fouling, which usually affects the water permeability coefficient (A), causing it to decrease. In RO desalination plants, fouling does not affect all spiral wound membrane modules (SWMMs) in the pressure vessels (PVs) in the same way. This will depend on the type of fouling and the position of the SWMM inside the PV. In this study, the impact of A and the position of the SWMM on the performance of the RO system is analyzed. For this purpose, decrements of up to 50% have been assumed for the seven SWMMs in series considering nine commercial SWMM models. The operating point analyzed is that which minimizes the specific energy consumption (SEC), a point obtained in a previous work carried out by the authors. The results show how the impact of A on the SWMM in the first position is more significant than the impact on modules that are in another position for the nine SWRO models studied. A drop of 50% in the coefficient A of the first element produces a permeate loss in the pressure pipe between 0.67 and 1.35 m3 d-1. Furthermore, it was observed that the models with the lowest coefficient A exhibited the highest performance losses in terms of permeate production when A was decreased.

Model Based Simulation and Genetic Algorithm Based Optimisation of Spiral Wound Membrane RO Process for Improved Dimethylphenol Rejection from Wastewater

Reverse Osmosis (RO) has already proved its worth as an efficient treatment method in chemical and environmental engineering applications. Various successful RO attempts for the rejection of organic and highly toxic pollutants from wastewater can be found in the literature over the last decade. Dimethylphenol is classified as a high-toxic organic compound found ubiquitously in wastewater. It poses a real threat to humans and the environment even at low concentration. In this paper, a model based framework was developed for the simulation and optimisation of RO process for the removal of dimethylphenol from wastewater. We incorporated our earlier developed and validated process model into the Species Conserving Genetic Algorithm (SCGA) based optimisation framework to optimise the design and operational parameters of the process. To provide a deeper insight of the process to the readers, the influences of membrane design parameters on dimethylphenol rejection, water recovery rate and the level of specific energy consumption of the process for two different sets of operating conditions are presented first which were achieved via simulation. The membrane parameters taken into consideration include membrane length, width and feed channel height. Finally, a multi-objective function is presented to optimise the membrane design parameters, dimethylphenol rejection and required energy consumption. Simulation results affirmed insignificant and significant impacts of membrane length and width on dimethylphenol rejection and specific energy consumption, respectively. However, these performance indicators are negatively influenced due to increasing the feed channel height. On the other hand, optimisation results generated an optimum removal of dimethylphenol at reduced specific energy consumption for a wide sets of inlet conditions. More importantly, the dimethylphenol rejection increased by around 2.51% to 98.72% compared to ordinary RO module measurements with a saving of around 20.6% of specific energy consumption.

IgG reactivity against citrullinated myelin basic protein in multiple sclerosis

An increased level of citrullinated myelin basic protein (MBP-C8) has been reported in the brains of multiple sclerosis (MS) patients. However, the involvement of the immune response to post-translational modified MBP in the pathophysiology of MS remains speculative. The aim of this study was to compare the levels of immunoglobulin G antibodies to several MBP epitopes, before and after citrullination, in the cerebrospinal fluid (CSF) and sera of MS patients using enzyme-linked immunosorbent assay (ELISA). We analyzed antibody reactivity against various MBP-peptides in the CSF and sera of 60 MS patients, and 30 patients with other neurological diseases (OND) as controls. The peptides tested were: MBP(75-98) (peptide 1), native (peptide 2) and citrullinated (peptide 3) MBP(108-126) (ARG(122)-->Cit(122)), and native (peptide 4) and citrullinated (peptide 5) MBP(151-170) (ARG(159, 170)-->Cit(159, 170)). All selected peptides could support an immune reactivity in CSF and sera of MS and OND patients. A higher reactivity against peptide 4 was found in the CSF of MS patients compared with OND patients (P<0.0001), but not against citrullinated peptides (peptides 3 and 5). However, we observed that the citrullination state of peptide 2 modified the patterns of immune reactivity more markedly in MS patients (P<0.0001) than in OND patients (P<0.02). Although some MBP epitopes could be a potential target in MS, our data did not demonstrate any difference of antibody response to MBP peptides in their citrullinated forms.