Adsorption of microcystin-LR on mesoporous carbons and its potential use in drinking water source

Microcystin-LR (MC-LR) is a common toxin derived from cyanobacterial blooms an effective, rapid and non-toxic method needs to be developed for its removal from drinking water treatment plants (DWTP). For an adsorption-based method, mesoporous carbon can be a promising supplemental adsorbent. The effect of mesoporous carbon (MC1, MC2, and MC3) properties and water quality parameters on the adsorption of MC-LR were investigated and the results were analyzed by kinetic, isotherm, thermodynamic, Derjaguin-Landau-Verwey-Overbeek (DLVO), and intraparticle diffusion models. MC1 was the most appropriate type for the removal of MC-LR with a maximum adsorption capacity of 35,670.49 μg/g. Adsorption of MC-LR is a spontaneous reaction dominated by van der Waals interactions. Pore sizes of 8.5-14 nm enhance the pore diffusion of MC-LR from the surface to the mesopores of MC1. The adsorption capacity was not sensitive to changes in the pH (3.2-8.0) and the existence of organic matter (2-5 mg/L). Furthermore, the final concentration of MC-LR was below the WHO guideline level after a 10-min reaction with 20 mg/L of MC1 in the Nak-Dong River, a drinking water source. The MC-LR adsorption mainly competed with humic substances (500-1000 g/mole); however, they did not have a great effect on adsorption.

Experimental and modeling analyses for interactions between graphene oxide and quartz sand

The aim of this study was to quantify the interactions between graphene oxide (GO) and quartz sand by conducting experimental and modeling analyses. The results show that both GO and quartz sand were negatively charged in the presence of 0-50 mM NaCl and 5 mM CaCl₂ (GO = -43.10 to -17.60 mV, quartz sand = -40.97 to -8.44 mV). In the Derjaguin-Landau-Verwey-Overbeek (DLVO) energy profiles, the adhesion of GO to quartz sand becomes more favorable with increasing NaCl concentration from 0 to 10 mM because the interaction energy profile was compressed and the primary maximum energy barrier was lowered. At 50 mM NaCl and 5 mM CaCl₂, the primary maximum energy barrier even disappeared, resulting in highly favorable conditions for GO retention to quartz sand. In the Maxwell model analysis, the probability of GO adhesion to quartz sand (α_m) increased from 2.46 × 10^-4 to 9.98 × 10^-1 at ionic strengths of 0-10 mM NaCl. In the column experiments (column length = 10 cm, inner diameter = 2.5 cm, flow rate = 0.5 mL min^-1), the mass removal (Mr) of GO in quartz sand increased from 5.4% to 97.8% as the NaCl concentration was increased from 0 to 50 mM, indicating that the mobility of GO was high in low ionic strength solutions and decreased with increasing ionic strength. The Mr value of GO at 5 mM CaCl₂ was 100%, demonstrating that Ca²⁺ had a much stronger effect than Na⁺ on the mobility of GO. In addition, the mobility of GO was lower than that of chloride (Mr = 1.4%) but far higher than that of multi-walled carbon nanotubes (Mr = 87.0%) in deionized water. In aluminum oxide-coated sand, the Mr value of GO was 98.1% at 0 mM NaCl, revealing that the mobility of GO was reduced in the presence of metal oxides. The transport model analysis indicates that the value of the dimensionless attachment rate coefficient (D_a) increased from 0.11 to 4.47 as the NaCl concentration was increased from 0 to 50 mM. In the colloid filtration model analysis, the probability of GO sticking to quartz sand (α_f) increased from 6.23 × 10^-3 to 2.52 × 10^-1 as the NaCl concentration was increased from 0 to 50 mM.

Transport of carboxyl-functionalized carbon black nanoparticles in saturated porous media: Column experiments and model analyses

The aim of this study was to investigate the transport behavior of carboxyl-functionalized carbon black nanoparticles (CBNPs) in porous media including quartz sand, iron oxide-coated sand (IOCS), and aluminum oxide-coated sand (AOCS). Two sets of column experiments were performed under saturated flow conditions for potassium chloride (KCl), a conservative tracer, and CBNPs. Breakthrough curves were analyzed to obtain mass recovery and one-dimensional transport model parameters. The first set of experiments was conducted to examine the effects of metal (Fe, Al) oxides and flow rate (0.25 and 0.5 mL min(-1)) on the transport of CBNPs suspended in deionized water. The results showed that the mass recovery of CBNPs in quartz sand (flow rate=0.5 mL min(-1)) was 83.1%, whereas no breakthrough of CBNPs (mass recovery=0%) was observed in IOCS and AOCS at the same flow rate, indicating that metal (Fe, Al) oxides can play a significant role in the attachment of CBNPs to porous media. In addition, the mass recovery of CBNPs in quartz sand decreased to 76.1% as the flow rate decreased to 0.25 mL min(-1). Interaction energy profiles for CBNP-porous media were calculated using DLVO theory for sphere-plate geometry, demonstrating that the interaction energy for CBNP-quartz sand was repulsive, whereas the interaction energies for CBNP-IOCS and CBNP-AOCS were attractive with no energy barriers. The second set of experiments was conducted in quartz sand to observe the effect of ionic strength (NaCl=0.1 and 1.0mM; CaCl2=0.01 and 0.1mM) and pH (pH=4.5 and 5.4) on the transport of CBNPs suspended in electrolyte. The results showed that the mass recoveries of CBNPs in NaCl=0.1 and 1.0mM were 65.3 and 6.4%, respectively. The mass recoveries of CBNPs in CaCl2=0.01 and 0.1mM were 81.6 and 6.3%, respectively. These results demonstrated that CBNP attachment to quartz sand can be enhanced by increasing the electrolyte concentration. Interaction energy profiles demonstrated that the interaction energy profile for CBNP-quartz sand was compressed and that the energy barrier decreased as the electrolyte concentration increased. Furthermore, the mass recovery of CBNPs in the presence of divalent ions (CaCl2=0.1 mM) was far lower than that in the presence of monovalent ions (NaCl=0.1 mM), demonstrating a much stronger effect of Ca(2+) than Na(+) on CBNP transport. Mass recovery of CBNPs at pH 4.5 was 55.6%, which was lower than that (83.1%) at pH 5.4, indicating that CBNP attachment to quartz sand can be enhanced by decreasing the pH. The sticking efficiencies (α) calculated from the mass recovery by colloid filtration theory were in the range from 2.1×10(-2) to 4.5×10(-1), which were far greater than the values (2.56×10(-6)-3.33×10(-2)) of theoretical sticking efficiencies (αtheory) calculated from the DLVO energy by the Maxwell model.

A Multiple Regression Model Approach to Contrast The Performance of 2-Hydroxy-4-Methylthio Butanoic Acid and DL-Methionine Supplementation Tested in Broiler Experiments and Reported in the Literature

The purpose of this paper was to compile all available literature comparing the relative performance of 2-hydroxy-4-methylthio butanoic acid (HMTBA) with DL-methionine (DLM) in broiler chickens and using multiple regression techniques, to estimate the predicted dose responses and relative performance of the 2 Met compounds for gain and feed conversion (FC). A database was developed that contained all available broiler studies in which HMTBA and DLM were both present in the same study; weight gain was recorded; Met addition, age of birds, and duration of study were defined; and an unsupplemented control treatment was present. Sixty-two references complied with these criteria and included 100 experiments with 427 observations for HMTBA and 411 for DLM. Multiple regression analysis of the database was used to identify the experimental and dietary conditions that contributed to the gain and FC responses of each source of Met activity. All identified variables contributed similarly to each Met source prediction model and both gain and FC models described a quadratic dose response. Under the average conditions of the database, the predicted responses for gain and FC models did not significantly differ between HMTBA and DLM. However, a trend was observed (P < or = 0.1) for the peak gain response for HMTBA to be numerically greater than DLM, suggesting benefits of HMTBA over DLM in the region of supplementation that is commercially relevant. The experimental and nutritional conditions that contribute to the response to HTMBA and DLM were identified and are discussed in the paper. This statistical approach provided a means to summarize the results obtained from a multitude of studies conducted over the last 5 decades and has provided a meaningful estimate of the relative performance of the 2 sources of Met activity. The lack of differences between the 2 predicted models under experimental and commercial conditions supports an overall conclusion of equal performance of DLM and HTMBA when compared on an equal molar basis.